Glass Surface Refining by Deposition of Nano-Particles

2013 ◽  
Vol 592-593 ◽  
pp. 329-332
Author(s):  
Marcin Drajewicz ◽  
Paweł Rokicki
Keyword(s):  
Glass Surface ◽  
Chemical Properties ◽  
Soda Lime ◽  
Nano Particles ◽  
X Ray ◽  
Spectrometry Analysis ◽  
Soda Lime Silica Glass ◽  
Glass Surfaces ◽  
Physical And Chemical ◽  
And Chemical Properties

In the paper a new surface refining technology which uses nano-particles to improve the soda – lime – silica glass surfaces is presented. The SEM-EDS (Energy Dispersive X-ray Spectrometry) analysis was carried out to determine modification of the glass surface. A very thin modification layer was observed on the glass surface. The surface modification leads to an improvement of physical and chemical properties of the investigated glass.

Monitoring of Fluctuations in the Physical and Chemical Properties of a High-Calcium Fly Ash

1987 ◽  
Vol 113 ◽  
Author(s):  
Scott Schlorholtz ◽  
Ken Bergeson ◽  
Turgut Demirel
Keyword(s):  
Fly Ash ◽  
Chemical Properties ◽  
Operating Conditions ◽  
Physical And Chemical Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
High Calcium ◽  
Physical And Chemical ◽  
And Chemical Properties

ABSTRACTThe physical and chemical properties of fly ash produced at Ottumwa Generating Station have been monitored since April, 1985. The fly ash is produced from burning a low sulfur, sub-bituminous coal obtained from the Powder River Basin near Gillette, Wyoming. One-hundred and sixty samples of fly ash were obtained during the two year period. All of the samples were subjected to physical testing as specified by ASTM C 311. About one-hundred of the samples were also subjected to a series of tests designed to monitor the self-cementing properties of the fly ash. Many of the fly ash samples were subjected to x-ray diffraction and fluorescence analysis to define the mineralogical and chemical composition of the bulk fly ash as a function of sampling date. Hydration products in selected hardened fly ash pastes, were studied by x-ray diffraction and scanning electron microscopy. The studies indicated that power plant operating conditions influenced the compressive strength of the fly ash paste specimens. Mineralogical and morphological studies of the fly ash pastes indicated that stratlingite formation occurred in the highstrength specimens, while ettringite was the major hydration product evident in the low-strength specimens.

scholarly journals PHYSICAL AND CHEMICAL STUDIES OF OVERROOF ROCKS OF CLAY SHALES OF THE DZHERDANAK DEPOSIT

2021 ◽  
pp. 16-21
Keyword(s):  
Electron Microscopy ◽  
Fine Structure ◽  
Chemical Properties ◽  
Mineralogical Composition ◽  
Physical And Chemical Properties ◽  
X Ray ◽  
Clay Shales ◽  
Chemical Studies ◽  
Physical And Chemical ◽  
And Chemical Properties

The purpose of this study is study of the physical and chemical properties of the overburden of the Dzherdanak deposit. The chemical and mineralogical composition of the overburden of the Djerdanak deposit has been studied by the methods of X-ray and thermography, electron microscopy and infrared spectroscopy. The main phases are quartz, kaolinite and muscovite. The study of the fine structure of the rock under an electron microscope showed the homogeneity of the rock with pronounced uniform inclusions, which is preserved even after firing. Changes in the rock after firing at 1050 °C have been determined. The formation of mullite at this temperature has been established.

scholarly journals Fracture analysis and countermeasures of the grid switch castings

2020 ◽  
Vol 165 ◽  
pp. 06015
Author(s):  
Chao Feng ◽  
Siyuan Yang ◽  
Qiao Li ◽  
Mengbao Zhou ◽  
Songqi Wu ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Fracture Analysis ◽  
Casting Defects ◽  
Physical And Chemical Properties ◽  
Direct Reading ◽  
X Ray ◽  
Detection Technology ◽  
Two Stages ◽  
Physical And Chemical ◽  
And Chemical Properties

Based on the detection technology of direct reading spectrum, metallographic microscope and X-ray, the defects of the grid switch castings were analyzed. The four main forms of casting fracture were summarized as poor physical and chemical properties, material misuse, casting defects and designing defects. In order to strengthen the quality control of the source of the product, it was proposed to carry out targeted network inspection in the two stages of material arrival and infrastructure acceptance.

Characterization of Shivirtui Zeolite Modified with Aluminum Oxyhydroxide Nanofibers

2019 ◽  
Vol 942 ◽  
pp. 40-49
Author(s):  
Yulia Murashkina ◽  
Olga B. Nazarenko
Keyword(s):  
Chemical Properties ◽  
Nitrogen Adsorption ◽  
X Ray Diffraction ◽  
Scanning Electronic Microscopy ◽  
Electronic Microscopy ◽  
X Ray ◽  
Physical And Chemical ◽  
And Chemical Properties ◽  
Aluminum Oxyhydroxide

Natural zeolite of Shivirtui deposit (Russia) was modified with nanofibers of aluminum oxyhydroxide AlOOH. Aluminum oxyhydroxide nanofibers were produced at the heating and oxidation of aluminum powder with water. The properties of modified zeolite were investigated by means of X-ray diffraction, transmission electronic microscopy, scanning electronic microscopy, low-temperature nitrogen adsorption, thermal analysis, and Fourier transform infrared spectroscopy. It was found that water content in the modified sample of zeolite was about 15 %. Based on the study of the physical and chemical properties, shivirtui zeolite modified with nanofibers of aluminum oxyhydroxide can be proposed for use as a flame-retardant additive to polymers.

scholarly journals MgO Refractory Doped with ZrO2 Nanoparticles: Influence of Cold Isostatic and Uniaxial Pressing and Sintering Temperature in the Physical and Chemical Properties

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1297 ◽  
Author(s):  
Cristian Gómez-Rodríguez ◽  
Daniel Fernández-González ◽  
Linda Viviana García-Quiñonez ◽  
Guadalupe Alan Castillo-Rodríguez ◽  
Josué Amilcar Aguilar-Martínez ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Cold Isostatic Pressing ◽  
Zro2 Nanoparticles ◽  
Furnace Lining ◽  
Physical And Chemical Properties ◽  
X Ray ◽  
Isostatic Pressing ◽  
Physical And Chemical ◽  
The Impact ◽  
And Chemical Properties

The chemical environment and the internal conditions of the furnaces and ladles are extremely aggressive for the refractories, so metallurgical industries demand refractory linings with greater durability and resistance to avoid unforeseen stoppages and to reduce the changes of the furnace lining. Therefore, the current work aims to evaluate the impact of the additions of ZrO2-nanoparticles (1, 3, and 5 wt. %) in magnesia-based bricks. A comparative study of the physical and chemical properties in bricks obtained using two cold pressing techniques (uniaxial and isostatic pressing) and two sintering temperatures (1550 and 1650 °C) was carried out. The microstructure and crystalline phase characteristics obtained after the heat treatments and the slag corrosion test was studied using scanning electron microscopy/electron dispersive X-ray spectroscopy (SEM/EDX) and X-ray diffraction (XRD). The results reveal that the sample with 5 wt. % of ZrO2 nanoparticles (obtained by cold isostatic pressing and sintering at 1650 °C) has the lowest porosity and greatest resistance to penetration of blast furnace slag.

scholarly journals A Convenient Synthesis of Antimony Nanorods using 1,2,4,5-Benzenetetracarboxylic Acid

2019 ◽  
Vol 31 (6) ◽  
pp. 1301-1304
Author(s):  
NTAOTE DAVID SHOOTO
Keyword(s):  
Coordination Polymers ◽  
Chemical Properties ◽  
Carboxyl Groups ◽  
Physical And Chemical Properties ◽  
X Ray ◽  
Ideal Candidate ◽  
Convenient Synthesis ◽  
Physical And Chemical ◽  
Coordination Configuration ◽  
And Chemical Properties

1,2,4,5-Benzenetetracarboxylic acid (H4Btec) is an ideal candidate for the synthesis of new coordination polymers compounds because of its four carboxyl groups bridging moieties with antimony ions having distorted coordination configuration. This work reports a new compound of coordination polymer, namely, [Sb2(C4H4O6)2(Btec)(H2O)]n, [(C4H4O6)2 = tartrate and Btec4− = 1,2,4,5-benzenetetracarboxylic anion] has been synthesized under reflux. The physical and chemical properties of coordination polymers; Sb2(C4H4O6)2(Btec)(H2O) was affirmed by scanning electron microscope, Fourier transform infrared spectroscopy, X-ray powder diffraction, thermogravimetric analyses and photoluminescence spectroscopy.

scholarly journals Crystal structure and chemical constitution of basic beryllium acetate and its homologues

1926 ◽  
Vol 112 (761) ◽  
pp. 441-448 ◽  
Keyword(s):  
Crystal Structure ◽  
Organic Compound ◽  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
X Ray ◽  
Chemical Constitution ◽  
Physical And Chemical ◽  
And Chemical Properties

The physical and chemical properties of basic beryllium acetate, OBe 4 (CH 3 .CO 2 ) 6 , are those of a non-ionised substance having the unitary structure of a typical organic compound, each chemical molecule of which may be regarded as forming one co-ordination complex. The fact that the arrangement of the eleven associating units of which this molecule is composed possesses the geometrical attributes of a tetrahedron has led to a stereochemical conception of the constitution of the compound, which is confirmed by the results of X-ray analysis.

Preparation and Evaluation of Nano-Hydroxyapatite/β-Tricalcium Phosphate/Chitosan Composite Scaffolds for Bone Tissue Engineering

2007 ◽  
Vol 361-363 ◽  
pp. 463-466
Author(s):  
T. Lin ◽  
S.M. Zhang ◽  
J. Li ◽  
L. Zhang ◽  
Y.H. Liu ◽  
...  
Keyword(s):  
Chemical Properties ◽  
Physical And Chemical Properties ◽  
X Ray Diffraction ◽  
Composite Scaffolds ◽  
X Ray ◽  
Viable Cells ◽  
Physical And Chemical ◽  
Chitosan Composite ◽  
Preparation And Evaluation ◽  
And Chemical Properties

The composite scaffolds with nine different ratios of nano-HA and ß-TCP content were fabricated by using lyophilization method. Their microscopy, physical and chemical properties were investigated by using scanning electron microscopy (SEM), X-ray diffraction (XRD), and fourier transformed infrared (FTIR) spectroscopy. MTT test was applied to quantitatively assess the number of viable cells attached and grown on the scaffolds. And the result showed that the amount of cells on the scaffold containing 30% by mass of nano-HA was significantly higher than the other samples.

Physical and Chemical Properties of Mineral in Soils of Cassava Cropping Area: A Case Study in Chonburi Province

2014 ◽  
Vol 979 ◽  
pp. 440-443
Author(s):  
W. Siriprom ◽  
K. Teanchai ◽  
S. Kongsriprapan ◽  
J. Kaewkhao ◽  
N. Sangwaranatee
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Chemical Properties ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Physical And Chemical ◽  
And Chemical Properties

The chemical and physical properties of topsoil and subsoil which collected from the cassava cropping area in Chonburi Province have been investigated. The characterization of both soil sample were used X-Ray Diffraction (XRD), Energy Dispersive X-Ray Fluorescence (EDXRF) while FTIR used to confirmed the formation of intermolecular bonding and Thermo-Gravimetric Analysis (TGA) used for investigated the crystalline. It was found that, the XRD pattern indicated quartz phase. The chemical composition by XRF reported that the soils samples consist of Si, Al, Ca, Fe, K, Mn, Ti, Cr, Zn, Ag and Cu. and TGA results, noticed that the removal of moisture and organics material.

Sign in / Sign up

Export Citation Format

Share Document