Effect of Anti-Rut Agents on Properties of Asphalt Mixture

2014 ◽  
Vol 599 ◽  
pp. 110-114 ◽  
Author(s):  
Yan Hua Wang ◽  
Kuang Yi Liu ◽  
Hai Xia Zhang ◽  
Shan Li
Keyword(s):  
High Temperature ◽  
Fatigue Life ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Damage Resistance ◽  
Damage Stability ◽  
Low Temperature Cracking ◽  
Water Damage

Anti-rut agent, named RPS-3000,was added into AC-25 asphalt mixture and its effects on high temperature stability, low temperature cracking resistance, water damage resistance and fatigue life were investigated in this paper. Results showed that the high temperature stability and low temperature crack resistance of the asphalt mixture improved significantly, the water damage stability increase slightly due to the introduction of anti-rut agents. Besides, the result of fatigue life test presented that excess amount of anti-rut agent may lead a deterioration of fatigue life. Keywords: Anti-rut agent; High temperature stability; Asphalt mixture

Influence of Double-Doped Admixtures on Asphalt Mixture Performance

2012 ◽  
Vol 557-559 ◽  
pp. 329-333
Author(s):  
Zhong Run Zheng ◽  
Chao Zhao ◽  
Yi Feng Zhao ◽  
Pei Song
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Rutting Resistance ◽  
Splitting Test ◽  
Improvement Effect ◽  
Low Temperature Cracking ◽  
Better Than

This paper introduces an asphalt mixture that mixed with different admixtures, rutting resistance agent and lignin fiber, at the same time. Rutting test and freeze-thaw splitting test are used to analyze rutting resistance on the high temperature and low temperature cracking of the asphalt mixture. The experiments with different mixes material composition are conducted to analysis various properties of the two admixtures on the mixture, especially the high temperature stability, low temperature crack resistance and the law of improvement effect. In addition, the experiments also determine the optimal asphalt content of different type of mixtures. The results showed that the single-doped KTL rutting resistance or lignin fibers have some improvement in water temperature performance of asphalt mixture, stability improvement of double-doped admixture asphalt mixture is better than the single-doped asphalt mixture, such as KTL rutting resistance agents and lignin fibers

Research of Coarse Grading Asphalt Mixtures Based on Grey Relational Analysis

2014 ◽  
Vol 599 ◽  
pp. 234-238 ◽  
Author(s):  
Liang Liang Tu ◽  
Jun Zheng ◽  
Shao Peng Wu
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Grey Relational Analysis ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Water Stability ◽  
High Temperature Stability ◽  
Relational Analysis ◽  
Low Temperature Cracking ◽  
Grey Relational

Grey relational analysis (GRA) is an important data handling techniques. In this paper, combining the characteristics of asphalt mixture, the method of GRA is applied to the study of coarse grading. The high temperature stability, low temperature cracking resistance and water stability of asphalt mixture with different grading were evaluated in the laboratory. The results showed that OGFC-25 gradation apply to asphalt mixture that demand high temperature stability. Similarly, ATB-25 gradation benefit low temperature performance and SUP-25 benefit water stability.

Study on Road Performance of Phase-Change Temperature-Adjusting Asphalt Mixture

2011 ◽  
Vol 287-290 ◽  
pp. 978-981 ◽  
Author(s):  
Biao Ma ◽  
Jun Li ◽  
Ren Wei Liu ◽  
Jin Ma
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Phase Change ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Water Stability ◽  
High Temperature Stability ◽  
Low Temperature Cracking ◽  
Long Time ◽  
Road Performance

Mixing the composite phase change material (CPCM) to asphalt mixture is a new way to solve the worldwide problem of the low-temperature cracking and high temperature rutting of the asphalt pavement. Asphalt mixture with CPCM can remain in the ideal working temperature range for a relatively long time. This paper analyzes the influence of the contents of CPCM on its road performance by laboratory testing. The study shows that mixing CPCM to asphalt mixture had little effect to the optimal asphalt content. For CPCM prepared by polymer shape-stabilized method, the high-temperature stability and the water stability of asphalt mixture increases firstly and then decreases the low-temperature anti-cracking stability decreases firstly and then increases with the increasing of CPCM. For CPCM prepared by carrier-adsorbed packaging process, the high-temperature stability decreases, low-temperature anti-cracking stability decreases firstly and then increases, the water stability increases firstly and then decreases with increasing of CPCM. The results indicate that CPCM has significant influences on its road performance. The optimal content of CPCM is around 0.3%.

A Study of Polyurethane Rubber Composite Modified Asphalt Mixture

2014 ◽  
Vol 941-944 ◽  
pp. 324-328 ◽  
Author(s):  
Zhong Ping Yao ◽  
Meng Li ◽  
Wei Liu ◽  
Zhen Bei Chen ◽  
Rong Hui Zhang
Keyword(s):  
High Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Damage Resistance ◽  
Modified Asphalt ◽  
Rubber Composite ◽  
Marshall Test ◽  
Composite Modification ◽  
Temperature Crack

Use polyurethane rubber composite modified asphalt.Through the Marshall test and rutting test, test of polyurethane rubber asphalt mixture high temperature stability, low temperature crack resistance and water damage resistance, verify the composite modification advantages.

Impact of Rheological Properties of Fiber Asphalt Mortar on Mixture Road Performance

2013 ◽  
Vol 734-737 ◽  
pp. 2287-2291 ◽  
Author(s):  
De Dong Guo
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Rheological Properties ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Fiber Content ◽  
High Temperature Stability ◽  
Temperature Performance ◽  
Low Temperature Performance ◽  
Asphalt Mortar

Fiber asphalt concrete has been more and more widely used in highway construction. For analyzing high and low temperature performance of fiber asphalt mixture, rheological properties of fiber asphalt mortar were studied through indoor test. Impact of Rheological properties of the fiber asphalt mortar on high temperature and low temperature properties of asphalt mixture was analyzed. Results showed that the larger fiber content was, the better performance of asphalt mixture's high temperature stability, fiber asphalt mortar rut factor and rutting tests results of asphalt mixture were linear correlation, reflecting the high temperature performance of asphalt mixture; With the increase of fiber content, variation of stiffness modulus, creep rate indicators and mixture low temperature performance was consistent, and rheological properties of fiber asphalt mortar could characterize low temperature performance of asphalt mixture.

scholarly journals Study on Laboratory Experimental Pavement Performances of SEAM Modified Asphalt Mixture

2019 ◽  
Vol 136 ◽  
pp. 03010
Author(s):  
Ma Qingna ◽  
Zhao Zhiqin ◽  
Xu Qian ◽  
Sun Feng
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Water Stability ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
The Road ◽  
Road Performance ◽  
Property Index

Adding sulphur dilution asphalt modifier SEAM to asphalt mixture is not only a modifier of asphalt mixture, but also an additive of asphalt mixture. When the modifier is added into the asphalt mixture, the road performance of the asphalt mixture can be improved. This paper studies SEAM modified asphalt mixture the Marshall property index, temperature stability, Water stability and fatigue feature in the Laboratory. On the based of the result of the experiment and analysis, SEAM can improve the high temperature stability, Water stability and fatigue feature. But the low temperature stability can’t improve.

scholarly journals Research on the Influence of Nanocarbon/Copolymer SBS/Rubber Powder Composite Modification on the Properties of Asphalt and Mixtures

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Wenhui Zhao ◽  
Xiangbing Xie ◽  
Guanghui Li ◽  
Jiuguang Geng ◽  
Meng Bao ◽  
...  
Keyword(s):  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Powder Composite ◽  
High Temperature Stability ◽  
Rubber Powder ◽  
Modified Asphalt ◽  
Modification Process ◽  
Low Temperature Cracking ◽  
Surface Modified

To expand the application range of modified asphalt and mixtures and effectively reduce the aggregation of nanomaterials in asphalt, nanocarbon/styrene butadiene styrene (SBS)/rubber powder composite-modified asphalt is proposed. This paper presents a laboratory study on the performance of nanocarbon/copolymer SBS/rubber powder composite-modified asphalt, and nanocarbon particles modified by titanate coupling agents as modifiers are selected. The nanocarbon/copolymer SBS/rubber powder composite-modified asphalt was prepared by a high-speed shearing method. The physical properties and rheological performance were assessed using ductility tests, softening point tests, penetration tests, dynamic shear rheometer (DSR) tests, and bending beam rheometer (BBR) tests. Furthermore, the mixture properties, including the high-temperature stability, low-temperature cracking resistance, moisture stability, and freeze-thaw splitting, were evaluated in the laboratory. The micromorphology of the base asphalt and composite-modified asphalt was examined by scanning electron microscopy (SEM), and the reactions between the modifiers and AH-70 base asphalt were studied by Fourier transform infrared spectroscopy (FTIR). The results reveal that the surface-modified nanocarbon and rubber powder additives substantially increased the softening point and penetration index of the base asphalt, with little obvious influence on the low-temperature performance. In addition, when nanocarbon/copolymer SBS/rubber powder composite-modified asphalt was used, the high-temperature stability and low-temperature cracking resistance of the nanocarbon/copolymer SBS/rubber powder composite-modified asphalt mixture were approximately 1.3 times those of the nanocarbon/rubber powder asphalt mixture. In terms of the micromorphology and reaction, the addition of the nanocarbon can increase the compatibility between the base asphalt and rubber powder, and then the addition of copolymer SBS can improve the structure of nanocarbon (after surface modification)/rubber powder-modified asphalt to form a stable network. Moreover, the physical reaction plays the dominant role in the modification process for the rubber powder and base asphalt, and chemical reactions occur in the modification process for the surface-modified nanocarbon and base asphalt.

scholarly journals Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1481 ◽  
Author(s):  
Xiaoliang Zhang ◽  
Ben Zhang ◽  
Huaxin Chen ◽  
Dongliang Kuang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Crack Resistance ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Limestone Powder ◽  
Low Grade ◽  
High Temperature Stability ◽  
Temperature Crack

Road construction consumes great amounts of high-grade natural resources. Using low-grade natural rocks or some solid wastes as substitute materials is a hot topic. Considering this, the feasibility of using low-grade granite aggregate, solid waste-based filler (desulphurization gypsum residues, DGR) and binder (waste tire rubber modified asphalt, RMA) simultaneously in asphalt mixtures has been fully investigated in this research. The commonly used base asphalt and limestone powder (LP) filler were control groups. Material characteristics of raw materials mainly including micro-morphology, functional group, mineral phase, chemical composition and thermal stability were first evaluated in order to recognize them. Four asphalt mixtures (two asphalt binder and two filler) were then designed by standard Superpave method. Finally, a detailed investigation into the pavement performance of asphalt mixtures was carried out. The moisture damage resistance and low-temperature crack resistance were detected by the changing rules of stability, strength and fracture energy, and the high-temperature stability and fatigue performance were determined by wheel tracking test and indirect tensile (IDT) fatigue test, respectively. Results suggested that RMA and DGR both showed positive effects on the low-temperature crack resistance and fatigue property of the granite asphalt mixture. DGR also strengthened moisture stability. The contribution of RMA on high-temperature deformation resistance of the granite asphalt mixture was compelling. It can offset the insufficiency in high-temperature stability made by DGR. A conclusion can be made that asphalt mixture prepared with granite, DGR and RMA possesses satisfactory pavement performances.

The Influence of Coarse and Fine Ratio on ATB Asphalt Mixture Performance

2014 ◽  
Vol 587-589 ◽  
pp. 1276-1280
Author(s):  
Xiang Fei Zhai
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Bending Test ◽  
High Temperature Stability ◽  
Freeze Thaw ◽  
Splitting Test ◽  
Degree Of Stability ◽  
Stable Performance

Through the freeze-thaw splitting test, rutting test, low temperature bending test, comprehensive analysis the affect of coarse and fine ratio on ATB asphalt mixture performance. The results showed that: the ratio of change have a significant effect on water stability, high temperature stability, low temperature stability. Reasonable coarse and fine ratio have a higher degree of stability; Smaller coarse and fine ratio can effectively improve the asphalt mixture water stable performance, with coarse and fine ratio increased, freeze-thaw splitting strength ratio decreases; Larger coarse and fine ratio have an adverse effect on the high temperature stability, dynamic stability after the first increase and then decrease with increasing coarse and fine ratio; Smaller coarse and fine ratio can significantly improve the low temperature stability.

Pavement Performance Evaluation and Analysis on Different Cooling Ways of Asphalt Mixture

2013 ◽  
Vol 361-363 ◽  
pp. 1689-1692
Author(s):  
Yan Hai Yang ◽  
Xiao Xi Gao ◽  
Zhuo Liu ◽  
Yang Shen ◽  
Jing Xiong Gao
Keyword(s):  
Low Temperature ◽  
Energy Saving ◽  
Hot Mix Asphalt ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Economic Benefits ◽  
Pavement Performance ◽  
High Temperature Stability ◽  
Low Temperature Cracking ◽  
Road Materials

By adding Sasobit, DAT and BLT additives to reach the purpose of hot mix asphalt mixture construction temperature decreasing, achieve energy conservation and environmental protection. With an AC-13 SBS modified hot mix asphalt as reference, the high and low temperature performance and water stability of three energy-saving and environment-protecting road materials are evaluated through laboratory tests. The results show that compared with HMA, all the three kinds of energy-saving and environment-protecting road materials exhibited a significant increase by 8%-15% in high temperature stability. While the low temperature cracking resistance and anti-water damage performance of Sasobit mixture were decreased somewhat, little changes in these two aspects of the performance of the other two materials. Finally, analyses the economic benefits, and provide the basis for the choice of asphalt mixture cooling additives.

Sign in / Sign up

Export Citation Format

Share Document