Research on Cutting Force of Corner Milling of Inclined Plane

2016 ◽  
Vol 693 ◽  
pp. 856-862
Author(s):  
Shi Xiong Wu ◽  
Bin Li ◽  
Wei Ma
Keyword(s):  
Cutting Force ◽  
High Speed ◽  
Orthogonal Experiment ◽  
Cutting Parameters ◽  
Major Influence ◽  
Force Model ◽  
Feed Speed ◽  
Cutting Force Model ◽  
Processing Efficiency ◽  
Radial Depth

When milling corners in high speed, it will lead the mutation of cutting force that affects the processing quality and processing efficiency. In order to study the influence of milling parameters on milling force in the corner. Firstly, an orthogonal experimental of corner is designed to study the influence of various cutting parameters on cutting force. Axial cutting depth, radial depth, spindle speed and feed speed, as the major influence factors, impact on cutting force in corner milling. Then, a cutting force model of corner is established based on a method of orthogonal experiment linear regression. The significance test of regression equation and regression coefficient shows that cutting force model is accurate. The cutting force model is used to predict the cutting force, and then select the appropriate cutting parameters.

Simulation of Finite Element Analysis for Cutting Force of High-Speed Dry Gear Milling by Flying Cutter

2011 ◽  
Vol 86 ◽  
pp. 100-103
Author(s):  
Qian Guo ◽  
Chao Lin ◽  
Wei Quan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Comparative Analysis ◽  
Cutting Force ◽  
High Speed ◽  
Cutting Parameters ◽  
Force Model ◽  
Cutting Force Model ◽  
Element Analysis ◽  
Gear Hobbing

This paper makes the emulate experimental research of cutting force in high-speed dry gear milling by flying cutter with finite element analysis method by using the established cutting force model yet, makes the comparative analysis for the result of simulation experiment and theoretical calculation, verifies the correctness of cutting force model and calculation method, makes the comparative analysis for the influencing relations and changing laws of cutting force and cutting parameters and so many factors, and reveals the cutting mechanism of high-speed dry gear milling by flying cutter initially. By the research of this paper, it provides basic theory for subsequent cutting machine technology of high-speed dry gear hobbing, and establishes the theoretical basis for the spread and exploitation of this technology.

Influence on Cutting Forces and Vibration in High Speed Machining Pocket Corner

2011 ◽  
Vol 189-193 ◽  
pp. 3084-3088
Author(s):  
De Wen Tang ◽  
Ru Shu Peng ◽  
Rui Lan Zhao
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
High Speed ◽  
Sudden Change ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Poor Quality ◽  
Depth Of Cut ◽  
Processing Efficiency ◽  
Radial Depth

High speed milling hardened mould steel (above HRC50) at pocket corner generates the cutting forces increase and vibration gets fiercely because of the sudden change of cutting direction. It will cause serious wear and possible breakage of cutting tool, and poor quality of parts. Hence, the need to select reasonable cutting parameters and adopt appropriate cutting strategies will help them to achieve their goal. In this paper, the effects cutting parameters including cutting speed, pocket corner angle, feed rate per tooth and radial depth of cut on cutting force and vibration are studied. The results show that sharper pocket corner results in the increase of cutting force and makes vibration strong. Cutting force increase with the increase of cutting speeding, feed per tooth and radial depth of cut. The optimum of cutting speed leads to the decrease of vibration. It is proposed that cutting parameters should be optimized to improve tool life and processing efficiency.

Cutting Performance of Diamond Coated, TiAlN Coated and Carbide Cutting Tools in High Speed Milling Graphite

2014 ◽  
Vol 800-801 ◽  
pp. 451-459
Author(s):  
Yu Hai Zhou ◽  
Cheng Yong Wang ◽  
Qi Ming Wang
Keyword(s):  
Cutting Force ◽  
Cutting Forces ◽  
High Speed ◽  
Orthogonal Experiment ◽  
Cutting Tools ◽  
Cutting Parameters ◽  
Cutting Performance ◽  
Depth Of Cut ◽  
High Speed Milling ◽  
Radial Depth

This paper focusing on cutting performance high speed milling Electrical Discharging Machining (EDM) graphite with diamond coated、Carbide (WC) and TiAlN coated cutting Tools. tools wear, cutting force and machined surface had been researched. Experiment study including cutting speed, feed rate per tooth, radial depth of cut, axial depth of cut, and material of tools factors effects on the cutting forces. Cutting parameters are optimized based on the orthogonal experiment. Experiment in high speed milling with diamond coated tools all comparison with TiAlN coated and Carbide (WC) tools. On the surface quality, cutting forces and tool wear influence graphite cutting tool materials research, process parameters, tool design and optimization of processing parameters to provide supportive data. The minimum cutting force as the goal, through the orthogonal experiment for the optimization of cutting parameters obtained for the high speed milling graphite with diamond-coated tool: cutting force 360m/min,feed per tooth 0.15mm/z, radial depth of cut 0.9mm, axial depth of 9mm.

Design and Experimental Study of a Vespiary Exsector

2012 ◽  
Vol 468-471 ◽  
pp. 397-400
Author(s):  
Yan Hai Tang ◽  
Jin Bing Hu ◽  
Ling Yang ◽  
Pei Xiang He
Keyword(s):  
High Speed ◽  
Orthogonal Experiment ◽  
Cutting Speed ◽  
Cutting Parameters ◽  
Small Scale ◽  
Feed Speed ◽  
Revolution Speed ◽  
Significance Levels ◽  
Sealing Mechanism ◽  
Low Efficiency

The traditional removal method of a vespiary is labor-costing with characteristics of low efficiency and safety. According to the work high above the ground with hidden risk of the vespiary removal, a mechanical vespiary exsector was designed. The exsector is driven by a high speed motor, and the vespiary is removed by a cutting wire with high revolution speed. The cutting part can rotate 90 through drawing a pulling rope. A 2-layer sealing mechanism is operated through another pulling rope. The vespiary exsector has overall characteristics of small scale, light weight and good dexterity. Orthogonal experiment results show that factors of cutting speed and feed speed significantly contribute the width of cutting slot at the significance levels of 0.01 and 0.05 respectively, and the optimum cutting parameters are: cutting speed 10000rpm, feed speed 0.04m/s and diameter of the cutting wire 2mm.

Cutting Force Model of Aluminum Alloy 2014 in Turning with ANOVA Analysis

2010 ◽  
Vol 42 ◽  
pp. 242-245
Author(s):  
Yong Jie Ma ◽  
Yi Du Zhang ◽  
Xiao Ci Zhao
Keyword(s):  
Aluminum Alloy ◽  
Cutting Force ◽  
Response Surface ◽  
Cutting Forces ◽  
Cutting Parameters ◽  
Quadratic Model ◽  
Surface Model ◽  
Force Model ◽  
Machining Parameters ◽  
Cutting Force Model

In the present study, aluminum alloy 2014 was selected as workpiece material, cutting forces were measured under turning conditions. Cutting parameters, the depth of cut, feed rate, the cutting speed, were considered to arrange the test research. Mathematical model of turning force was solved through response surface methodology (RSM). The fitting of response surface model for the data was studied by analysis of variance (ANOVA). The quadratic model of RSM associated with response optimization technique and composite desirability was used to find optimum values of machining parameters with respect to cutting force values. The turning force coefficients in the model were calibrated with the test results, and the suggested models of cutting forces adequately map within the limits of the cutting parameters considered. Experimental results suggested that the most cutting force among three cutting forces was main cutting force. Main influencing factor on cutting forces was obtained through cutting force models and correlation analysis. Cutting force has a significant influence on the part quality. Based on the cutting force model, a few case studies could be presented to investigate the precision machining of aluminum alloy 2014 thin walled parts.

An Improved Tool Path Model Including Gyroscopic Effect for Instantaneous Cutting Force Prediction in High-Speed Milling

2011 ◽  
Vol 418-420 ◽  
pp. 840-843
Author(s):  
Qing Hua Song ◽  
Xing Ai
Keyword(s):  
Cutting Force ◽  
High Speed ◽  
Tool Path ◽  
Milling Process ◽  
Path Model ◽  
Force Model ◽  
Cutting Force Model ◽  
Gyroscopic Effect ◽  
Cutting Force Prediction ◽  
High Speed Milling

The efficiency of the high-speed milling process is often limited by the occurrence of chatter. In order to predict the occurrence of chatter, accurate models are necessary. With the speed increasing, gyroscopic effect plays an important pole on the system behavior, including dynamic characteristic and rotating behavior. Considering the influence of gyroscopic effect on rotating behavior, an updated model for the milling process is presented which features as model of the equivalent profile of tool. In combination with this model, a nonlinear instantaneous cutting force model is proposed. The use of this updated equivalent profile of tool results in significant differences in the static uncut thickness compared to the traditional model.

Cutting Force Model Prediction Considering Cutting Edge Parameters Base on Genetic Algorithm

2011 ◽  
Vol 188 ◽  
pp. 166-170
Author(s):  
Yu Wang ◽  
L.Q. Wang ◽  
Y.F. Li ◽  
Yuan Sheng Zhai ◽  
X.L. Liu
Keyword(s):  
Genetic Algorithm ◽  
Cutting Force ◽  
Cubic Boron Nitride ◽  
Cutting Tools ◽  
Cutting Parameters ◽  
Cutting Edge ◽  
Force Model ◽  
Cutting Force Model ◽  
Shear Slip ◽  
Hard Cutting

During precise hard cutting, back cutting depth and feed rate are relatively small. Study on the influence of PCBN (Polycrystalline Cubic Boron Nitride) cutting tools edge (chamfer edge or cutting edge radius) on cutting force is important. As the effect of cutting edge on mechanism of shear slip plane is very complicated, so to study the effect of consider cutting edge parameters and cutting parameters by genetic algorithm on cutting force, to build up cutting force model of precise hard cutting. It is feasible to predict cutting force by genetic algorithm with experiment.

Determination of Cutting Forces for Micro Milling

2008 ◽  
Author(s):  
Shih-Ming Wang ◽  
Zou-Sung Chiang ◽  
Da-Fun Chen
Keyword(s):  
Cutting Force ◽  
Chip Thickness ◽  
Cutting Parameters ◽  
Rake Angle ◽  
Micro Milling ◽  
Force Model ◽  
Machining Parameters ◽  
Cutting Force Model ◽  
Optimal Cutting Parameters

To enhance the implementation of micro milling, it is necessary to clearly understand the dynamic characteristics of micro milling so that proper machining parameters can be used to meet the requirements of application. By taking the effect of minimum chip thickness and rake angle into account, a new cutting force model of micro-milling which is function the instantaneous cutting area and machining coefficients was developed. According to the instantaneous rotation trajectory of cutting edge, the cutting area projected to xy-plane was determined by rectangular integral method, and used to solve the instantaneous cutting area. After the machining coefficients were solved, the cutting force of micro-milling for different radial depths of cut and different axial depths of cut can be predicted. The results of micro-milling experimental have shown that the force model can predict the cutting force accurately by which the optimal cutting parameters can be selected for micro-milling application.

Statistical Approach for the Development of Tangential Cutting Force Model in End Milling of Ti6Al4V

2011 ◽  
Vol 264-265 ◽  
pp. 1160-1165
Author(s):  
Anayet Ullah Patwari ◽  
A.K.M. Nurul Amin ◽  
Waleed Fekry Faris
Keyword(s):  
Mathematical Model ◽  
Cutting Force ◽  
End Milling ◽  
Dynamic Change ◽  
Cutting Parameters ◽  
Depth Of Cut ◽  
Machining Accuracy ◽  
Force Model ◽  
Machining Parameters ◽  
Cutting Force Model

Dynamic change in cutting force is one of the major causes of chatter formation in metal cutting which affect machining accuracy. Thus, accurate modeling of cutting force is necessary for the prediction of machining performance and determination of the mechanisms and machining parameters that affect the stability of machining operations. The present paper discusses the development of a mathematical model for predicting the tangential cutting force produced in endmilling operation of Ti6Al4V. The mathematical model for cutting force prediction has been developed in terms of the input cutting parameters cutting speed, feed rate, and axial depth of cut using response surface methodology (RSM). Effects of all the individual cutting parameters on cutting force as well as their interactions are investigated in this study. Central composite design was employed in developing the cutting force model in relation to the primary cutting parameters. The experimental results indicate that the proposed mathematical models suggested could adequately describe the performance indicators within the limits of the factors that are being investigated.

A Unified Cutting Force Model for Flat End Mills Based on Cutter Geometry and Material Properties

2016 ◽  
Vol 836-837 ◽  
pp. 408-416
Author(s):  
Xiao Dong Zhang ◽  
Ce Han ◽  
Ding Hua Zhang ◽  
Ming Luo
Keyword(s):  
Cutting Force ◽  
Material Properties ◽  
Maximum Shear Stress ◽  
Cutting Parameters ◽  
Flow Rule ◽  
Force Model ◽  
Cutting Force Model ◽  
Material Parameters ◽  
Chip Flow ◽  
End Mills

A unified oblique cutting force model for flat end mills is developed. In this model, the cutting force is bridged among cutter geometry, material properties and cutting parameters. The cutter angles, material parameters and cutting parameters are the only inputs so that the model is applicable for different cutter-workpiece combinations and cutting parameters. The parameters in the model are solved by the geometric relations, applying Maximum Shear Stress Principle and Stabler’s chip flow rule. The material parameters are identified in a new method with orthogonal milling tests. The simulation results of the proposed model are in good agreement with experiments.

Sign in / Sign up

Export Citation Format

Share Document