Granule Morphology of Supplementary Cementitious Materials under Different Cooling Conditions

2016 ◽  
Vol 723 ◽  
pp. 694-699
Author(s):  
Zai Bo Li ◽  
Xu Guang Zhao ◽  
San Yin Zhao ◽  
Tu Sheng He
Keyword(s):  
Building Materials ◽  
Major Axis ◽  
Cementitious Materials ◽  
Basic Oxygen Furnace ◽  
Supplementary Cementitious Materials ◽  
Basic Oxygen ◽  
Means Of Measurement ◽  
Granule Morphology ◽  
The Difference ◽  
Basic Oxygen Furnace Slag

Basic oxygen furnace slag (BOFS) , a mass supplementary cementitious materials, can be used as an active additive in building materials. The work present the result of granule morphology of two kinds of BOFS powder, cooled by water quenching (BOFS-W) and air splashing method(BOFS-A). Micrographs of two kinds of BOFS powder were observed with a scan electron microscope (SEM), then, length of major axis and minor axis of two-dimension projective outline of every granule in these SEM micrographs was measured manually and their ratio (RLB) was used to represent the granule sphericity. Each BOFS powder was divided into 6 parts with different granularity range. By means of measurement and statistical analysis, the average RLB value of granules with different granularity grade was obtained and the relation between size and sphericity of granule was explored. Result showed that BOFS-W is superior to BOFS-A in sphericity of granule. According to different granularity grade, statistical average values of RLB of BOFS-W and BOFS-A range 1.422-1.496 and 1.490-1.647, respectively. The difference of BOFS-W and BOFS-A on granule sphericity mainly is reflected in coarse granule.

scholarly journals Component Modification of Basic Oxygen Furnace Slag with C4AF as Target Mineral and Application

2021 ◽  
Vol 13 (12) ◽  
pp. 6536
Author(s):  
Yanrong Zhao ◽  
Pengliang Sun ◽  
Ping Chen ◽  
Xiaomin Guan ◽  
Yuanhao Wang ◽  
...  
Keyword(s):  
Intermediate Phase ◽  
Raw Materials ◽  
Activity Index ◽  
Basic Oxygen Furnace ◽  
Hydration Products ◽  
Basic Oxygen ◽  
Bof Slag ◽  
Mineral Compositions ◽  
Slag Component ◽  
Basic Oxygen Furnace Slag

In this paper, a new method of basic oxygen furnace (BOF) slag component modification with a regulator was studied. The main mineral was designed as C4AF, C2S and C3S in modified BOF slag, and the batching method, mineral compositions, hydration rate, activation index and capability of resisting sulfate corrode also were studied. XRD, BEI and EDS were used to characterize the mineral formation, and SEM was used to study the morphology of hydration products. The results show that most inert phase in BOF slag can be converted into active minerals of C4AF and C2S through reasonable batching calculation and the amount of regulating agent. The formation of C4AF and C2S in modified BOF slag is better, and a small amount of MgO is embedded in the white intermediate phase, but C3S is not detected. With the increase in the CaO/SiO2 ratio in raw materials, the CaO/SiO2 ratio of calcium silicate minerals in modified BOF slag increases, the contents of f-CaO are less than 1.0%, and the activity index improves. Compared with the BOF slag, the activity index and exothermic rate of modified BOF slag improved obviously, and the activity index of 90 days is close to 100%. With the increase in modified BOF slag B cement, the flexural strength decrease; however, the capability of resisting sulfate corrode is improved due to the constant formation of a short rod-like shape ettringite in Na2SO4 solution and the improvement of the structure densification of the hydration products.

scholarly journals Special Issue: Supplementary Cementitious Materials in Concrete, Part I

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2291
Author(s):  
Alessandro P. Fantilli ◽  
Daria Jóźwiak-Niedźwiedzka
Keyword(s):  
Environmental Impact ◽  
Portland Cement ◽  
Building Materials ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Special Issue ◽  
Cement Production ◽  
Concrete Part

The environmental impact of the Portland cement production and the large use of cement-based building materials is a growing problem [...]

scholarly journals Geotechnical Properties and Microstructure of Lime-Fly Ash-Phosphogypsum-Stabilized Soil

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Tebogo Pilgrene Mashifana ◽  
Felix Ndubisi Okonta ◽  
Freeman Ntuli
Keyword(s):  
Fly Ash ◽  
Expansive Soil ◽  
Basic Oxygen Furnace ◽  
Geotechnical Properties ◽  
Magnesium Silicide ◽  
Engineering Properties ◽  
Basic Oxygen ◽  
Basic Oxygen Furnace Slag ◽  
Phosphogypsum Waste ◽  
Furnace Slag

The use of industrial waste as a potential stabilizer of marginal construction materials is cost effective. Phosphogypsum and fly ash are industrial wastes generated in very large quantities and readily available in South Africa. In order to explore the potential stabilization of vastly abundant expansive soil using larger quantity phosphogypsum waste as a potential modifier, composites with a mixture of lime-fly ash-phosphogypsum-basic oxygen furnace slag were developed. However because of the presence of radionuclide, it was necessary to treat the phosphogypsum waste with mild citric acid. The effect of the acid treatment on the geotechnical properties and microstructure of expansive soil stabilized with phosphogypsum-lime-fly ash-basic oxygen furnace slag (PG-LFA-BOF) paste was evaluated, in comparison with the untreated phosphogypsum. Expansive soil stabilized with acid-treated PG-LFA-BOF paste exhibited better geotechnical properties; in particular, the high strength mobilized was associated primarily with the formation of various calcium magnesium silicide and coating by calcium silicate hydrate and calcium aluminate hydrate. The soil microstructure was improved due to the formation of hydration products. The stabilized expansive soil met the specification for road subgrades and subbase. Stabilization of expansive soils with phosphogypsum, fly ash, and basic oxygen fly ash does not only improve engineering properties of soil but also provides a solution in relation to disposal and environmental pollution challenges.

Basic oxygen furnace slag: Review of current and potential uses

2020 ◽  
Vol 149 ◽  
pp. 106234 ◽  
Author(s):  
Tamlyn Sasha Naidu ◽  
Craig Michael Sheridan ◽  
Lizelle Doreen van Dyk
Keyword(s):  
Basic Oxygen Furnace ◽  
Basic Oxygen ◽  
Basic Oxygen Furnace Slag ◽  
Furnace Slag

scholarly journals Feasibility and Characterization Mortar Blended with High-Amount Basic Oxygen Furnace Slag

Materials ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 6 ◽  
Author(s):  
Wei-Ting Lin ◽  
Chia-Jung Tsai ◽  
Jie Chen ◽  
Weidong Liu
Keyword(s):  
Steel Industry ◽  
Setting Time ◽  
Basic Oxygen Furnace ◽  
Cementitious Material ◽  
Partial Replacement ◽  
Supplementary Cementitious Material ◽  
Basic Oxygen ◽  
Basic Oxygen Furnace Slag ◽  
Furnace Slag ◽  
Weight Proportion

Basic oxygen furnace slag (BOFS) was ground to three levels of fineness as a replacement for cement at weight proportions of 10, 30, 50, and 70 wt.%. Fineness and weight proportion were shown to have significant effects on the flowability and setting time of the mortars. The expansion of BOFS mortars increased with an increase in the proportion of cement replaced, thereby exacerbating the effects of cracking. Optimal mechanical properties were achieved when 10 wt.% of the cement was replaced using BOFS with fineness of 10,000 cm2/g. The compressive strength of BOFS mortar is similar to that of ordinary Portland mortar, which makes BOFS suitable for the partial replacement of cement as a supplementary cementitious material. Scanning electron microscopy results revealed that the reaction of CaO with H2O results in the formation of C–S–H colloids, whereas the reaction of SiO2 with Al2O3 produces C–A–S–H colloids. The use of BOFS as a partial replacement for Portland cement could make a tremendous contribution to the steel industry and help to lower CO2 emissions.

Sign in / Sign up

Export Citation Format

Share Document