Simulation Study of Hydraulic Fracturing Mechanism with Heterogeneous Material

2011 ◽  
Vol 704-705 ◽  
pp. 993-999
Author(s):  
Tian Hong Yang ◽  
Hong Lei Liu ◽  
Qing Lei Yu ◽  
Shi Kuo Chen
Keyword(s):  
Hydraulic Fracturing ◽  
Pore Pressure ◽  
Failure Modes ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Heterogeneous Material ◽  
Engineering Practice ◽  
Asymmetric Distribution ◽  
Breakdown Pressure ◽  
Fracturing Mechanism

first of all, this paper intensive studies the hydraulic fracturing mechanism of heterogeneous material resultant from the seepage – damage coupling, based on which, the coupled seepage and damage effects during hydraulic fracturing is investigated, and the difficulties of hydraulic fracturing study are how to determine failure modes and breakdown pressure. By using numerically testing method, the mechanical mechanism of hydraulic fracturing under asymmetric distribution of pore pressure with three holes, including fracture patterns, stress flied distribution, initial fracturing pressure and breakdown pressure, was studied by using theFSDmodel. According to the results of this research, crack extension direction of hydraulic fracturing is influenced not only by the local pore pressure around crack tip, but also by the gradient distribution of macro pore water pressure. The fracturing direction always propagates towards the regions of higher local pore pressure and breakdown pressure decreases with the increasing of local pore pressure. These results are well aggress with the results in the experiments. This research has important theoretical and engineering value. In engineering practice, we can use the porous asymmetric hydraulic fracturing technology to control the direction of crack propagation. Keywords: hydraulic fracturing; numerical simulation; heterogeneous material; asymmetrical

scholarly journals The Hydromechanical Interplay in the Simplified Three-Dimensional Limit Equilibrium Analyses of Unsaturated Slope Stability

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 73
Author(s):  
Panagiotis Sitarenios ◽  
Francesca Casini
Keyword(s):  
Analytical Solution ◽  
Slope Stability ◽  
Slope Failure ◽  
Failure Modes ◽  
Pore Water Pressure ◽  
Limit Equilibrium ◽  
Water Pressure ◽  
Three Dimensional ◽  
Stability Limit ◽  
Smooth Transition

This paper presents a three-dimensional slope stability limit equilibrium solution for translational planar failure modes. The proposed solution uses Bishop’s average skeleton stress combined with the Mohr–Coulomb failure criterion to describe soil strength evolution under unsaturated conditions while its formulation ensures a natural and smooth transition from the unsaturated to the saturated regime and vice versa. The proposed analytical solution is evaluated by comparing its predictions with the results of the Ruedlingen slope failure experiment. The comparison suggests that, despite its relative simplicity, the analytical solution can capture the experimentally observed behaviour well and highlights the importance of considering lateral resistance together with a realistic interplay between mechanical parameters (cohesion) and hydraulic (pore water pressure) conditions.

Type of Slope Failure Identified from Pore Water Pressure and Moisture Content Measurements

2015 ◽  
Vol 744-746 ◽  
pp. 690-694
Author(s):  
Muhammad Rehan Hakro ◽  
Indra Sati Hamonangan Harahap
Keyword(s):  
Moisture Content ◽  
Pore Pressure ◽  
Slope Failure ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Failure Process ◽  
Small Scale ◽  
Content Increase ◽  
Sudden Increase ◽  
Model Slope

Rainfall-induced landslides occur in many parts of the world and causing a lot of the damages. For effective prediction of rainfall-induced landslides the comprehensive understanding of the failure process is necessary. Under different soil and hydrological conditions experiments were conducted to investigate and clarify the mechanism of slope failure. The failure in model slope was induced by sprinkling the rainfall on slope composed of sandy soil in small flume. Series of tests were conducted in small scale flume to better understand the failure process in sandy slopes. The moisture content was measured with advanced Imko TDR (Time Domain Reflectrometry) moisture sensors in addition to measurements of pore pressure with piezometers. The moisture content increase rapidly to reach the maximum possible water content in case of higher intensity of rainfall, and higher intensity of the rainfall causes higher erosion as compared to smaller intensity of the rainfall. The controlling factor for rainfall-induced flowslides was density of the slope, rather than intensity of the rainfall and during the flowslide the sudden increase in pore pressure was observed. Higher pore pressure was observed at the toe of the slope as compared to upper part of the slope.

scholarly journals Mechanical response and pore pressure generation in granular filters subjected to uniaxial cyclic loading

2018 ◽  
Vol 55 (12) ◽  
pp. 1756-1768
Author(s):  
Jahanzaib Israr ◽  
Buddhima Indraratna
Keyword(s):  
Cyclic Loading ◽  
Pore Pressure ◽  
Pore Water ◽  
Mechanical Response ◽  
Pore Water Pressure ◽  
Axial Strain ◽  
Water Pressure ◽  
Internal Erosion ◽  
Excess Pore Water Pressure ◽  
Excess Pore

This paper presents results from a series of piping tests carried out on a selected range of granular filters under static and cyclic loading conditions. The mechanical response of filters subjected to cyclic loading could be characterized in three distinct phases; namely, (I) pre-shakedown, (II) post-shakedown, and (III) post-critical (i.e., the occurrence of internal erosion). All the permanent geomechanical changes such, as erosion, permeability variations, and axial strain developments, took place during phases I and III, while the specimen response remained purely elastic during phase II. The post-critical occurrence of erosion incurred significant settlement that may not be tolerable for high-speed railway substructures. The analysis revealed that a cyclic load would induce excess pore-water pressure, which, in corroboration with steady seepage forces and agitation due to dynamic loading, could then cause internal erosion of fines from the specimens. The resulting excess pore pressure is a direct function of the axial strain due to cyclic densification, as well as the loading frequency and reduction in permeability. A model based on strain energy is proposed to quantify the excess pore-water pressure, and subsequently validated using current and existing test results from published studies.

An effective stress model for creep of clay

1995 ◽  
Vol 32 (5) ◽  
pp. 819-834 ◽  
Author(s):  
Mohammed M. Morsy ◽  
D.H. Chan ◽  
N.R. Morgenstern
Keyword(s):  
Finite Element ◽  
Pore Pressure ◽  
Effective Stress ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Surface Model ◽  
Interpolation Technique ◽  
Stress Integration ◽  
Integration Algorithms ◽  
Double Yield

An effective stress constitutive model to study the problem numerically of creep in the field is presented. A double-yield surface model for the stress–strain–time behaviour of wet clay is described. The model adopts the concept of separating the total deformation into immediate and delayed components. The yield surfaces employed are the modified Cam-clay ellipsoid and the Von Mises cylinder inscribed in the ellipsoid. The proposed numerical scheme incorporates the pore pressure based on field observations into a finite element analysis. An interpolation technique is used to determine the pore pressure at every element. A field example is presented to illustrate the interpolation technique procedure. The scheme not only avoids the complexity of making predictions of pore-water pressure, but also allows the analysis to be carried out in terms of effective stresses based on the actual observed pore pressure. Two stress integration algorithms based on the implicit calculation of plastic strain are implemented and tested for the double-yield surface model. A numerical simulation of stress-controlled drained creep tests confirms the numerical procedure. Key words : constitutive equations, creep, finite element, stress integration algorithms, effective stress approach, pore-water pressure.

scholarly journals Effects of seepage and weak interlayer on the failure modes of surrounding rock: model tests and numerical analysis

2019 ◽  
Vol 6 (9) ◽  
pp. 190790
Author(s):  
Jing Hu ◽  
Haijia Wen ◽  
Qilong Xie ◽  
Binyang Li ◽  
Qu Mo
Keyword(s):  
Failure Modes ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Model Tests ◽  
Surrounding Rock ◽  
Modes Of Failure ◽  
Geological Conditions ◽  
Weak Interlayer ◽  
Rock Model ◽  
Distribution Of Stress

The presence of weak interlayers and groundwater are common adverse geological conditions in tunnels. To investigate the modes of failure of rock masses surrounding tunnels owing to weak interlayers and groundwater, model tests and numerical simulations were conducted in this study based on two cases, and a model that considers only the weak interlayer was conducted for comparison. Based on the tests, differences between two models in terms of rock pressure, displacement, cracks and strain were analysed. The results reveal that the presence of groundwater has a significant effect on the space–time distribution of stress, displacement and cracks in the surrounding rock. Furthermore, based on the numerical model, the seepage field was analysed in terms of pore water pressure, permeability and the seepage process to understand the joint action of groundwater and weak interlayer on the failure mechanism of tunnels. The results show that the groundwater and interlayer complement each other to induce the failure mode of the surrounding rock. The water accelerates slip in the interlayer and the development of cracks. Conversely, low strength, muddy weak interlayers serve as the channels of water flow, resulting in deformations and cracks at different locations and different failure modes.

Experimental verification of the theory of consolidation for unsaturated soils

1995 ◽  
Vol 32 (5) ◽  
pp. 749-766 ◽  
Author(s):  
Harianto Rahardjo ◽  
Delwyn G. Fredlund
Keyword(s):  
Water Content ◽  
Pore Pressure ◽  
Pore Water ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Matric Suction ◽  
Water Volume ◽  
Loading Tests ◽  
Undrained Loading

An experimental program was designed to study the behavior of unsaturated soils during undrained loading and consolidation. A Ko cylinder was designed and built for the testing program. Simultaneous measurements of pore-air and pore-water pressures could be made throughout a soil specimen using this Ko cylinder. Four types of tests were performed on a silty sand. These are (1) undrained loading tests where both the air and water are not allowed to drain, (2) constant water content tests where only the water phase is not allowed to drain, (3) consolidation tests where both the air and water phases are allowed to drain, and (4) increasing matric suction tests. Undrained loading tests or constant water content loading tests were conducted for measuring the pore pressure parameters for the unsaturated soil. Drained tests consisting of either consolidation tests or increasing matric suction tests were conducted to study the pore pressure distribution and volume change behavior throughout an unsaturated soil during a transient process. The experimental pore pressure parameters obtained from the undrained loadings and constant water content leadings agreed reasonably well with theory. The pore-air pressure was found to dissipate instantaneously when the air phase is continuous. The pore-water pressure dissipation during the consolidation test was found to be faster than the pore-water pressure decrease during the increasing matric suction test. The differing rates of dissipation were attributed to the different coefficients of water volume change for each of the tests. The water volume changes during the consolidation test were considerably smaller than the water volume changes during the increasing matric suction tests for the same increment of pressure change. Key words : consolidation, Ko loading, matric suction, pore-air pressures, pore-water pressures, unsaturated soils

Horizontal pressure on barricades for backfilled stopes. Part II: Submerged conditions

2009 ◽  
Vol 46 (1) ◽  
pp. 47-56 ◽  
Author(s):  
Li Li ◽  
Michel Aubertin
Keyword(s):  
Pore Pressure ◽  
Pore Water Pressure ◽  
Experimental Testing ◽  
Water Pressure ◽  
Companion Paper ◽  
Simple Method ◽  
Horizontal Pressure ◽  
Undrained Conditions ◽  
Backfilled Stopes ◽  
Submerged Conditions

This paper presents a method to calculate the pressure generated by submerged backfill on barricades (or bulkheads) located in drifts at the base of mine stopes. The paper complements Part I (see companion paper, this isue), which presents an analytical solution for the pressure on barricades when the backfill is in drained conditions (after the pore-water pressure has dissipated). The solution presented here applies shortly after backfill deposition, for undrained conditions. In this case, the effect of pore pressure cannot be neglected as it may be critical for the response of barricades. The solution is developed for totally or partly submerged backfill (with the water table at various elevations). Experimental testing and numerical modelling results are used to validate the proposed equations. Both numerical and analytical results show that the total pressure on barricades can be significantly increased by pore pressure, while the effective stress is decreased in the access drifts (compared to dry or drained conditions). The proposed solution provides a simple method to obtain a realistic estimate of the total and effective stresses, and can thus be used as a basis for barricade design.

Second Canadian Geotechnical Colloquium: Appropriate concepts and technology for unsaturated soils

1979 ◽  
Vol 16 (1) ◽  
pp. 121-139 ◽  
Author(s):  
D. G. Fredlund
Keyword(s):  
Unsaturated Soil ◽  
Unsaturated Soils ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Three Dimensional ◽  
Earth Pressure ◽  
Saturated Soil ◽  
Engineering Practice ◽  
The Matrix ◽  
Matrix Suction

A practical science has not been fully developed for unsaturated soils for two main reasons. First, there has been the lack of an appropriate science with a theoretical base. Second, there has been the lack of an appropriate technology to render engineering practice financially viable.This paper presents concepts that can be used to develop an appropriate engineering practice for unsaturated soils. The nature of an unsaturated soil is first described along with the accompanying stress conditions. The basic equations related to mechanical properties are then proposed. These are applied to practical problems such as earth pressure, limiting equilibrium, and volume change.An attempt is made to demonstrate the manner in which saturated soil mechanics must be extended when a soil is unsaturated. Two variables are required to describe the stress state of an unsaturated soil (e.g., (σ – ua) and (ua – uW). There is a smooth transition from the unsaturated case to the saturated case since the pore-air pressure becomes equal to the pore-water pressure as the degree of saturation approaches 100%. Therefore, the matrix suction (i.e., (ua – uW) goes to 0 and the pore-water pressure can be substituted for the pore-air pressure (i.e., (σ – uW)).The complete volumetric deformation of an unsaturated soil requires two three-dimensional constitutive surfaces. These converge to one two-dimensional relationship for a saturated soil. The shear strength for an unsaturated soil is a three-dimensional surface that reduces to the conventional Mohr–Coulomb envelope for a saturated soil.The manner of applying the volumetric deformation equations and the shear strength equation to practical problems is demonstrated. For earth pressure and limiting equilibrium problems, the unsaturated soil can be viewed as a saturated soil with an increased cohesion. The increase in cohesion is proportional to the matrix suction of the soil. For volume change problems it is necessary to have an indication of the relationship between the various soil moduli.There is a need for further experimental studies and case histories to substantiate the proposed concepts and theories.

Sign in / Sign up

Export Citation Format

Share Document