Preparation and Photocatalytic Activity of Yellow Titania

2013 ◽  
Vol 743-744 ◽  
pp. 849-856 ◽  
Author(s):  
Lin Li ◽  
Sheng Qi Xi ◽  
Yang Nan Xing ◽  
Fei Hu Shang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Light Response ◽  
Yellow Powder ◽  
X Ray ◽  
Titania Powder ◽  
Light Yellow ◽  
Transmission Electron

Titania powder was prepared by a sol-gel method and heat-treatment (HT). The morphology and structure of the titania powder were characterized by X-ray diffraction (XRD), differential thermal analysis, transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of powder was investigated using methyl orange as target compound. Colour changing of powder was due to colour centers form. Under visible light, yellow powder showed the better photocatalytic activity than P25 powder and its visible light response was expanded. Preparation of yellow powder lowered conventional calcinations temperature obviously.

scholarly journals Improved Visible Light Photocatalytic Activity for TiO2Nanomaterials by Codoping with Zinc and Sulfur

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Qianzhi Xu ◽  
Xiuying Wang ◽  
Xiaoli Dong ◽  
Chun Ma ◽  
Xiufang Zhang ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Sunlight Irradiation ◽  
X Ray ◽  
Transmission Electron ◽  
Photoinduced Charge

S/Zn codoped TiO2nanomaterials were synthesized by a sol-gel method. X-ray diffraction, UV-vis diffuse reflectance spectroscopy, transmission electron microscopy, photoluminescence spectroscopy, and X-ray photoelectron spectroscopy were used to characterize the morphology, structure, and optical properties of the prepared samples. The introduction of Zn and S resulted in significant red shift of absorption edge for TiO2-based nanomaterials. The photocatalytic activity was evaluated by degrading reactive brilliant red X-3B solution under simulated sunlight irradiation. The results showed S/Zn codoped TiO2exhibited higher photocatalytic activity than pure TiO2and commercial P25, due to the photosynergistic effect of obvious visible light absorption, efficient separation of photoinduced charge carriers, and large surface area. Moreover, the content of Zn and S in the composites played important roles in photocatalytic activity of TiO2-based nanomaterials.

FeYO3@rGO nanocomposites: Synthesis, characterization and application in photooxidative degradation of atrazine under visible light

2021 ◽  
Vol 11 (5) ◽  
pp. 706-716
Author(s):  
Nada D. Al-Khthami ◽  
Tariq Altalhi ◽  
Mohammed Alsawat ◽  
Mohamed S. Amin ◽  
Yousef G. Alghamdi ◽  
...  
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Bandgap Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Structural Surface ◽  
Adsorption Desorption

Different organic pollutants have been remediated photo catalytically by applying perovskite photocatalysts. Atrazine (ATR) is a pesticide commonly detected as a pollutant in drinking, surface and ground water. Herein, FeYO3@rGO heterojunction was synthesized and applied for photooxidation decomposition of ATR. First, FeYO 3nanoparticles (NPs) were prepared via routine sol-gel. After that, FeYO3 NPs were successfully incorporated with different percentages (5, 10, 15 and 20 wt.%) of reduced graphene oxide (rGO) in the synthesis of novel FeYO3@rGO photocatalyst. Morphological, structural, surface, optoelectrical and optical characteristics of constructed materials were identified via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), adsorption/desorption isotherms, diffusive reflectance (DR) spectra, and photoluminescence response (PL). Furthermore, photocatalytic achievement of the constructed materials was evaluated via photooxidative degradation of ATR. Various investigations affirmed the usefulness of rGO incorporation on the advancement of formed photocatalysts. Actually, novel nanocomposite containing rGO (15 wt.%) possessed diminished bandgap energy, as well as magnified visible light absorption. Furthermore, such nanocomposite presented exceptional photocatalytic achievement when exposed to visible light as ATR was perfectly photooxidized over finite amount (1.6 g · L-1) from the optimized photocatalyst when illuminated for 30 min. The advanced photocatalytic performance of constructed heterojunctions could be accredited mainly to depressed recombination amid induced charges. The constructed FeYO3@rGO nanocomposite is labelled as efficient photocatalyst for remediation of herbicides from aquatic environments.

scholarly journals Photocatalytic Performance of SiO2/CNOs/TiO2 to Accelerate the Degradation of Rhodamine B under Visible Light

Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1671 ◽  
Author(s):  
Weike Zhang ◽  
Yanrong Zhang ◽  
Kai Yang ◽  
Yanqing Yang ◽  
Jia Jia ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Degradation Rate ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electronic Microscope

A silicon dioxide/carbon nano onions/titanium dioxide (SiO2/CNOs/TiO2) composite was synthesized by a simple sol-gel method and characterized by the methods of X-ray diffraction (XRD), scanning electronic microscope (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR), thermogravimetric analysis (TG), differential scanning calorimeter (DSC) and UV-Vis diffuse reflectance spectra (UV-Vis DRS). In this work, the photocatalytic activity of the SiO2/CNOs/TiO2 photocatalyst was assessed by testing the degradation rate of Rhodamine B (RhB) under visible light. The results indicated that the samples exhibited the best photocatalytic activity when the composite consisted of 3% CNOs and the optimum dosage of SiO2/CNOs/TiO2(3%) was 1.5 g/L as evidenced by the highest RhB degradation rate (96%). The SiO2/CNOs/TiO2 composite greatly improved the quantum efficiency of TiO2. This work provides a new option for the modification of subsequent nanocomposite oxide nanoparticles.

One-Pot Hydrothermal Synthesis of Sulfur-Doped SnO2 Nanoparticles and their Enhanced Photocatalytic Properties

NANO ◽  
2016 ◽  
Vol 11 (03) ◽  
pp. 1650035 ◽  
Author(s):  
Lin Ma ◽  
Limei Xu ◽  
Xuyao Xu ◽  
Xiaoping Zhou ◽  
Lingling Zhang
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Electrochemical Impedance ◽  
Sno2 Nanoparticles ◽  
Light Response ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Light Region ◽  
Vis Spectroscopy

Sulfur-doped SnO2 nanoparticles with ultrafine sizes have been successfully prepared by a one-pot hydrothermal method. The obtained samples are characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM), thermogravimetric (TG), analyzer UV-Vis spectroscopy, photoluminescence (PL) and electrochemical impedance spectroscopy (EIS). The experimental results indicate that the doping level of sulfur element as well as the bandgaps of SnO2 can be controlled to a certain extent by varying the amount of L-cysteine (L-cys). When evaluated as photocatalysts in the degradation of rhodamine B (RhB) and reduction of Cr(VI) under visible light region, the resultant sulfur-doped SnO2 nanoparticles demonstrate obviously enhanced photocatalytic activities due to the markedly improved visible light response and effective separation of the photo-generated electron–hole pairs.

Preparation and Photocatalytic Properties of La, Ce and Nonmetal N Co-Doped TiO2

2016 ◽  
Vol 680 ◽  
pp. 193-197
Author(s):  
San Ti Yi ◽  
Si Qin Zhao
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Uv Light ◽  
Sol Gel ◽  
Light Response ◽  
Gel Method ◽  
X Ray ◽  
Sol Gel Method ◽  
Co Doped

TiO2, 1%La/TiO2, 1%Ce/TiO2 and a series of Laand Ce co-doped TiO2 photocatalysts were prepared by sol-gel method. Using sol-gel method combine with hydrothermal method prepared rare earth La, Ce and nitrogen co-doped TiO2 photocatalysts. The microstructure, spectroscopy performance and ion doped form of prepared samples were characterized by X-ray powder diffraction (XRD), UV-Vis diffuse reflectance spectroscopy techniques and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of doped TiO2 were examined by measuring the photodegradation of methyl orange. The results showed that the products were all anatase TiO2 nano powder, doping Laor Cehinder the growth of TiO2 particle, further more, doping Laand Cetogether hinder the growth of TiO2 particle more effective, doping N broaden the light response range of TiO2 photocatalyst. At the same time, the photocatalytic activity results indicated that the prepared samples showed superior UV light photocatalytic activity, the sample 1% (La:Ce,9:1)-N/TiO2 showed the highest UV-vis photocatalytic activity.

scholarly journals Enhanced Visible Light Photocatalytic Activity of Mesoporous AnataseTiO2Codoped with Nitrogen and Chlorine

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Xiuwen Cheng ◽  
Xiujuan Yu ◽  
Zipeng Xing ◽  
Lisha Yang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Band Gap ◽  
Light Absorption ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Visible Region ◽  
X Ray ◽  
Visible Light Photocatalytic Activity ◽  
Visible Light Photocatalytic

Anatase mesoporous titanium dioxide codoped with nitrogen and chlorine (N-Cl-TiO2) photocatalysts were synthesized through simple one-step sol-gel reactions in the presence of ammonium chloride. The resulting materials were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible diffuse reflection spectrum (UV-vis DRS). XRD results indicated that codoping with nitrogen and chlorine could effectively retard the phase transformation of TiO2from anatase to rutile and the growth of the crystallite sizes. XPS revealed that nitrogen and chlorine elements were incorporated into the lattice of TiO2through substituting the lattice oxygen atoms. DRS exhibited that the light absorption of N-Cl-TiO2in visible region was greatly improved. As a result, the band gap of TiO2was reduced to 2.12 eV. The photocatalytic activity of the as-synthesized TiO2was evaluated for the degradation of RhB and phenol under visible light irradiation. It was found that N-Cl-TiO2catalyst exhibited higher visible light photocatalytic activity than that of P25 TiO2and N-TiO2, which was attributed to the small crystallite size, intense light absorption in visible region, and narrow band gap.

scholarly journals Preparation of g-C3N4/MoS2 Composite Material and Its Visible Light Catalytic Performance

2021 ◽  
Author(s):  
Yu Fan ◽  
Yan-ning Yang ◽  
Chen Ding
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Photogenerated Electron ◽  
Catalytic Performance ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Calcination Method

Abstract The g-C3N4 nanosheet was prepared by calcination method, the MoS2 nanosheet was prepared by hydrothermal method. The g-C3N4/MoS2 composites were prepared by ultrasonic composite in anhydrous ethanol. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-Vis), and photoluminescence (PL) techniques were used to characterize the materials. The photocatalytic degradation of Rhodamine B (Rh B) by g-C3N4/MoS2 composites with different mass ratios was investigated under visible light. The results show that a small amount of MoS2 combined with g-C3N4 can significantly improve photocatalytic activity. The g-C3N4/MoS2 composite with a mass ratio of 1:8 has the highest photocatalytic activity, and the degradation rate of Rh B increases from 50% to 99.6%. The main reason is that MoS2 and g-C3N4 have a matching band structure. The separation rate of photogenerated electron-hole pairs is enhanced. So the g-C3N4/MoS2 composite can improve the photocatalytic activity. The photocatalytic mechanism was proposed through the active matter capture experiment.

Synthesis, Characterization and Photocatalytic Activity of Copper (II)-Doped Titanium Dioxide Powders

2011 ◽  
Vol 391-392 ◽  
pp. 728-731 ◽  
Author(s):  
Wen Churng Lin ◽  
Wein Duo Yang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Specific Surface ◽  
Photoelectron Spectroscopy ◽  
Effective Means ◽  
Sol Gel ◽  
Particle Growth ◽  
X Ray ◽  
Surface Areas ◽  
Vis Spectroscopy

Different concentration of copper (II) doped TiO2 photocatalyst powders were synthesized through the sol-gel method and characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET)-specific surface area, transmission electron microscopy (TEM), and Ultraviolet–Visible (UV-Vis) spectroscopy. Cu2+-doping in the TiO2 promotes the particle growth, decreases the specific surface areas of powders, extends the absorption to visible light regions, and exhibits the vis-photocatalytic activity for methylene blue (MB) degradation. Appropriate content of Cu2+-doping is an effective means to improve the photocatalytic activity of TiO2 for MB degradation under visible light irradiation.

Preparation and Photocatalytic Activity of Bi Doped TiO2 with Visible-Light Response

2012 ◽  
Vol 550-553 ◽  
pp. 404-410
Author(s):  
Hua Jun Chen ◽  
Xiao Jing Xi ◽  
Dong Li ◽  
Rui Wang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Light Response ◽  
High Photocatalytic Activity ◽  
Raw Material ◽  
Tetrabutyl Titanate ◽  
X Ray ◽  
Visible Light Response ◽  
Transmission Electron ◽  
Bi Doping

A Bi-TiO2 composite with high photocatalytic activity was prepared using tetrabutyl titanate and bismuth nitrate as raw material by hydrothermal method. The structure was characterized by X-ray diffraction(XRD), transmission electron microscopy(TEM), X-ray energy dispersive spectroscopy(EDS), X-ray fluorescence(XRF) and UV-vis diffuse reflectance spectrophotometer(UV-vis DRS). The results show that anatase nanometer titanium dioxide was prepared, in which Bi3+ take the place of Ti4+. The surface area of the sample was higher, ca.312.6m2•g-1. Bi doping caused red-shift of the absorption spectrum, and the composite has better Visible-light Response. Bi-TiO2 shows higher photocatalytic avtivity to the degradation of resorcinol than pure TiO2. The optimum value of Bi doped was 1.00 %. After 120 minutes illuminating under 70W Halide Lamps, degradation rate of resorcinol can get to 100%.

Cobalt and sulfur co-doped TiO2 nanostructures with enhanced photo-response properties for photocatalyst

2017 ◽  
Vol 10 (05) ◽  
pp. 1750061 ◽  
Author(s):  
Qiu Jin ◽  
Chaoyin Nie ◽  
Qianqian Shen ◽  
Yusheng Xu ◽  
Yanzhong Nie
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Response Threshold ◽  
X Ray Diffraction ◽  
X Ray ◽  
Valence States ◽  
Transmission Electron ◽  
Photo Response ◽  
Co Doped

Cobalt (Co) and sulfur (S) co-doped titanium dioxide (TiO2) catalysts were synthesized via sol–gel method. The structure of TiO2was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM). The valence states of elements were studied by X-ray photoelectron spectroscopy (XPS), and the optical-absorption properties of the catalysts were tested using the ultraviolet–visible (UV–Vis) spectrophotometer. The results showed that the grain sizes of Co and S co-doped TiO2 decreased with the increase of Co and S doping concentration within a certain range, and then the catalysts had obvious red shift on the absorption of visible light. Sample (2%Co–5%S–TiO2) showed excellent light absorption characteristics and the photo-response threshold increased significantly to about 760[Formula: see text]nm. Also, the further degradation test under visible light shows the 2%Co–5%S-TiO2 sample exhibit apparently improved degradation efficiency for Rhodamine B compared to the undoped one.

Sign in / Sign up

Export Citation Format

Share Document