β Grain Growth Kinetics of a New Metastable β Titanium Alloy

2013 ◽  
Vol 747-748 ◽  
pp. 844-849 ◽  
Author(s):  
Yue Fei ◽  
Xin Nan Wang ◽  
Zhi Shou Zhu ◽  
Jun Li ◽  
Guo Qiang Shang ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Grain Growth ◽  
Kinetic Equations ◽  
Type Equation ◽  
Growth Exponent ◽  
Solution Treated ◽  
Growth Activation ◽  
Grain Growth Kinetics ◽  
Kinetics Of ◽  
Strength And Ductility

Ti-Mo-Nb-Cr-Al-Fe-Si alloy is a new metastable β titanium alloy with excellent combination of strength and ductility. The β grain-growth exponent and the activation energies for β grain growth for the investigated alloy at specified temperature were computed by the kinetic equations and the Arrhenius-type equation. The rate of β grain growth decreases with elongating solution treated time and increases with the increasing solution-treated temperature. The β grain-growth exponents, n, are 0.461, 0.464 and 0.469 at 1113, 1133 and 1153K, respectively. The β grain growth activation energy is determined to be 274 KJ/mol.

β Grain Growth Kinetics of Hot-Rolled TB-13 Alloy

2011 ◽  
Vol 689 ◽  
pp. 472-478 ◽  
Author(s):  
Yue Fei ◽  
Bin Tang ◽  
Hui Chang ◽  
Zhi Shou Zhu ◽  
Zhong Bo Zhou ◽  
...  
Keyword(s):  
Activation Energy ◽  
Grain Growth ◽  
Kinetic Equations ◽  
Type Equation ◽  
Growth Exponent ◽  
Fine Grained ◽  
Solution Treated ◽  
Grain Growth Kinetics ◽  
Hot Rolled ◽  
Kinetics Of

A study on the kinetics of β grain growth of a fine-grained, hot-rolled TB-13 alloy was carried out by isochronal and isothermal solution treatments. The grain size of the as-rolled and as-solution-treated samples was determined by metallographic observation using the linear intercept method. The kinetic equations and the Arrhenius-type equation were applied to calculate the β grain growth exponent and the activation energy for β grain growth at special temperatures. The results showed that the β grain growth rate decreased with elongating solution treated time, but increased with increasing solution treated temperature. The β grain growth exponents (n) were 0.394, 0.403 and 0.406 during the solution treated temperatures at 1103K, 1153K and 1203K, respectively. The values of n increased with increasing solution treated temperature and the determined activation energy (Qm) for β grain growth after holding for 0.5h at 1103K-1203K was around 156KJ/mol.

scholarly journals Kinetics of Grain Growth in 718 Ni-Base Superalloy

2014 ◽  
Vol 59 (3) ◽  
pp. 847-852 ◽  
Author(s):  
Z. Huda ◽  
T. Zaharinie ◽  
H.S.C. Metselaar ◽  
S. Ibrahim ◽  
Goh J. Min
Keyword(s):  
Activation Energy ◽  
Grain Growth ◽  
Kinetic Equations ◽  
Type Equation ◽  
Growth Exponent ◽  
Modern Material ◽  
Treatment Equipment ◽  
Kinetics Of ◽  
Base Superalloy ◽  
Heat Treatment Equipment

Abstract The Haynes® 718 Ni-base superalloy has been investigated by use of modern material characterization, metallographic and heat treatment equipment. Grain growth annealing experiments at temperatures in the range of 1050 – 1200 oC (1323–1473K) for time durations in the range of 20 min-22h have been conducted. The kinetic equations and an Arrhenius-type equation have been applied to compute the grain-growth exponent n and the activation energy for grain growth, Qg, for the investigated alloy. The grain growth exponent, n, was computed to be in the range of 0.066-0.206; and the n values have been critically discussed in relation to the literature. The activation energy for grain growth, Qg, for the investigated alloy has been computed to be around 440 kJ/mol; and the Qg data for the investigated alloy has been compared with other metals and alloys and ceramics; and critically analyzed in relation to our results.

Grain Growth Kinetics of Cobalt-Doped SnO2 by Varying Nb2O5 Content

2007 ◽  
Vol 534-536 ◽  
pp. 529-532 ◽  
Author(s):  
Dong Gyu Chang ◽  
Joon Hyung Lee ◽  
Jeong Joo Kim
Keyword(s):  
Grain Growth ◽  
Boundary Segregation ◽  
Growth Behavior ◽  
Grain Boundary Segregation ◽  
Growth Exponent ◽  
Space Charges ◽  
Grain Growth Kinetics ◽  
Grain Growth Behavior ◽  
Kinetics Of ◽  
Co Doped

SnO2 ceramics were co-doped with the aliovalent ions of CoO and Nb2O5 and the grain growth behavior of the SnO2 was investigated. When only CoO was doped, the grain growth exponent of SnO2 was 3. As the amount of Nb2O5 increased, the exponent changed from 3 to 2 when 0.505 mol% of Nb2O5 was added. The further addition of Nb2O5 changed the exponent from 2 to 3. When Nb2O5 content was 0.505 mol%, of which the grain growth exponent was 2, it is believed that an iso-electric point is formed without grain boundary segregation, since the respective space charges, generated by Nb5+ and Co3+ might compensate each other.

Grain Growth in Nb-Alloyed Stainless Steel of AISI 347 during Heating

2013 ◽  
Vol 753 ◽  
pp. 345-348 ◽  
Author(s):  
Hai Wen Luo ◽  
Han Dong ◽  
Ling Feng Chen
Keyword(s):  
Activation Energy ◽  
Stainless Steel ◽  
Grain Growth ◽  
Growth Kinetics ◽  
Isothermal Holding ◽  
Growth Exponent ◽  
Microalloyed Steels ◽  
Nb Content ◽  
Grain Growth Kinetics ◽  
Kinetics Of

Grain growth kinetics in an AISI 347 stainless steel with Nb content up to 0.7%wt was studied during the isothermal holding in the temperature range of 1100-1270°C for various periods. Abnormal grain growth was observed even in the presence of a large amount of precipitates. The kinetics of normal grain growth was tracked by metallographic measurements and fitted by the classical modeling, which led to two important parameters of activation energy Q and growth exponent n derived. Both of them are larger than the usual values for grain growth in the Nb-microalloyed steels due to the much larger content of Nb in the present steel.

scholarly journals Grain growth kinetics for B2O3-doped ZnO ceramics

2015 ◽  
Vol 33 (2) ◽  
pp. 220-229 ◽  
Author(s):  
Berat Yuksel ◽  
T. Osman Ozkan
Keyword(s):  
Activation Energy ◽  
Grain Growth ◽  
Growth Kinetics ◽  
Liquid Phase Sintering ◽  
Growth Exponent ◽  
Second Phase ◽  
Growth Activation ◽  
Doped Zno ◽  
Grain Growth Kinetics ◽  
Zno Ceramics

AbstractGrain growth kinetics in 0.1 to 2 mol % B2O3-added ZnO ceramics was studied by using a simplified phenomenological grain growth kinetics equation Gn = K0 · t · exp(-Q/RT) together with the physical properties of sintered samples. The samples, prepared by conventional ceramics processing techniques, were sintered at temperatures between 1050 to 1250 °C for 1, 2, 3, 5 and 10 hours in air. The kinetic grain growth exponent value (n) and the activation energy for the grain growth of the 0.1 mol % B2O3-doped ZnO ceramics were found to be 2.8 and 332 kJ/mol, respectively. By increasing B2O3 content to 1 mol %, the grain growth exponent value (n) and the activation energy decreased to 2 and 238 kJ/mol, respectively. The XRD study revealed the presence of a second phase, Zn3B2O6 formed when the B2O3 content was > 1 mol %. The formation of Zn3B2O6 phase gave rise to an increase of the grain growth kinetic exponent and the grain growth activation energy. The kinetic grain growth exponent value (n) and the activation energy for the grain growth of the 2 mol % B2O3-doped ZnO ceramics were found to be 3 and 307 kJ/mol, respectively. This can be attributed to the second particle drag (pinning) mechanism in the liquid phase sintering.

Grain Growth Kinetics of Accumulative Roll Bonded AZ61 Alloy

2012 ◽  
Vol 585 ◽  
pp. 387-391 ◽  
Author(s):  
H. Shivananda Nayaka ◽  
Gajanan P. Chaudhari ◽  
B.S. Sunder Daniel
Keyword(s):  
Grain Growth ◽  
Growth Kinetics ◽  
Annealing Temperature ◽  
Isothermal Annealing ◽  
Arrhenius Equation ◽  
Growth Exponent ◽  
Az61 Magnesium Alloy ◽  
Ultrafine Grained ◽  
Grain Growth Kinetics ◽  
Kinetics Of

A detailed study was performed on the grain growth kinetics of ultrafine-grained AZ61 magnesium alloy produced by accumulative roll bonding by carrying out isothermal annealing treatments on the roll bonded samples. Annealing treatments were carried out in the temperature range 423 to 573K for 2 to 120 minutes. As the annealing time and temperature increased, the grain size increased. The effect of annealing temperature and time, on the grain growth can be well explained by the kinetic equation and Arrhenius equation. Based on the experimental results of grain growth during annealing treatments, the grain growth exponent and the activation energy for grain growth were determined. The grain growth kinetic parameters were compared with other magnesium alloys processed by various methods.

Grain Growth Kinetics of a Ti+Nb Stabilized 12%Cr Ferritic Stainless Steel at High Temperature

2011 ◽  
Vol 66-68 ◽  
pp. 108-113 ◽  
Author(s):  
Chang Jiang Song ◽  
Liang Zhu ◽  
Yuan Yi Guo ◽  
Ke Feng Li ◽  
Feng Mei Sun ◽  
...  
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Grain Growth ◽  
Ferritic Stainless Steel ◽  
Growth Exponent ◽  
Growth Behaviour ◽  
Small Particles ◽  
Grain Growth Kinetics ◽  
Kinetics Of ◽  
Very High

By using a thermal simulator this work investigated grain growth behaviour of a Ti+Nb stabilized 12%Cr ferritic stainless steel at high temperature. The results showed that the grain growth rate was less than 1.8μm/s at the temperature of 1200°C, but it suddenly became very high and reached about 50μm/s when the temperature was 1250°C. Analysis results indicate that grain growth of this steel is affected by the small particles on the grain boundaries, and grain growth exponent is about 3.3. Moreover, the activation energy of the grain growth is when the temperature is above 1250°C. Compared with a 27Cr ferritic stainless steel containing only 0.14%Nb, the grain growth exponent of this steel is greater, and grain initial rapid growth temperature is higher.

Sign in / Sign up

Export Citation Format

Share Document