Taguchi Optimization of Process Parameters for Forming Time in Incremental Sheet Forming Process

2013 ◽  
Vol 773-774 ◽  
pp. 137-143 ◽  
Author(s):  
Zhao Bing Liu ◽  
Yan Le Li ◽  
W.J.T. Bill Daniel ◽  
Paul Meehan
Keyword(s):  
Process Parameters ◽  
Feed Rate ◽  
Tool Path ◽  
Sheet Thickness ◽  
Sheet Forming ◽  
Analysis Tool ◽  
Forming Process ◽  
Rate Sheet ◽  
Step Over ◽  
Tool Diameter

ncremental sheet forming (ISF) is a new promising technology due to its flexibility and low-cost tooling properties compared with conventional forming processes. However, it is only suitable for small-batch production because of its incremental feature inducing relative long forming time. Presently, widespread usage of the process is restricted by a lack of predictive understanding of the process due to its complexity. In this paper, the aspect of forming time is studied by investigating the effects of four distinctive process parameters (step over, feed rate, sheet thickness and tool diameter). An effective analysis tool, Taguchi method together with design of experiment (DOE) and analysis of variance (ANVOA) is utilized to study the effects of the four process parameters on forming time and further to optimize parameter combinations in order to minimize forming time. Using these techniques, experimental results show that the step over of spiral tool path is the most important process parameter affecting forming time followed by feed rate. Sheet thickness and tool diameter have little effect on forming time. The comparison between the prediction of optimized parameter combination and the confirmation test result has further demonstrated the effectiveness of the proposed method. It is worth noting that the results of this study will indicate a further direction on how to optimize process parameters to find a balance between forming efficiency (forming time) and forming quality (forming accuracy and surface roughness).

scholarly journals Investigation of the influence of incremental sheet forming process parameters using response surface methodology

2021 ◽  
Vol 118 (4) ◽  
pp. 401
Author(s):  
Belouettar Karim ◽  
Ould Ouali Mohand ◽  
Zeroudi Nasereddine ◽  
Thibaud Sébastien
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Process Parameters ◽  
Damage Evolution ◽  
Sheet Forming ◽  
Thickness Reduction ◽  
Forming Process ◽  
Influence Of Process Parameters ◽  
Forming Angle ◽  
Tool Diameter

New methods in metal forming are rapidly developing and several forming processes are used to optimize manufacturing components and to reduce cost production. Single Point Incremental Forming (SPIF) is a metal sheet forming process used for rapid prototyping applications and small batch production. This work is dedicated to the investigation of the profile geometry and thickness evolution of a truncated pyramid. The influence of process parameters during a SPIF process is also studied. A numerical response surface methodology with a Design of Experiments (DOE) is used to improve the thickness reduction and the effects of the springback. A set of 16 tests are performed by varying four parameters: tool diameter, forming angle, sheet thickness, and tool path. The Gurson-Tvergaard-Needleman (GTN) damage model is used to analyze the damage evolution during material deformation. It is found that the model can effectively predict the geometrical profile and thickness with an error of less than 4%. Furthermore, it is noticed that the forming angle is the most influential parameter on the thickness reduction and springback level. Finally, the damage evolution is demonstrated to be sensitive to the forming angle.

Effect of Incremental Forming Process Parameters on Aluminum Alloy Using Experimental Studies

2015 ◽  
Vol 1119 ◽  
pp. 633-639 ◽  
Author(s):  
Sunil D. Majagi ◽  
G. Chandramohan ◽  
Mouleeswaran Senthil Kumar
Keyword(s):  
Aluminium Alloy ◽  
Process Parameters ◽  
Feed Rate ◽  
Rotational Speed ◽  
Incremental Sheet Forming ◽  
Thickness Reduction ◽  
Tool Rotational Speed ◽  
Forming Process ◽  
Vertical Step ◽  
Tool Diameter

Incremental Sheet Forming (ISF) process is Innovative and cost effective technology trend for forming products in manufacturing industries. The current research is to study and investigate the influence of incremental sheet forming process parameters on response surfaces of aluminium alloy sheet components. In this experiment, Aluminium alloy AA1050 sheet was selected to process forming by using CNC machining centre without expensive dies. Individual and interactive effect of different factors such as, thickness of sheet, tool diameter, vertical step, feed rate, and tool rotational speed at different levels were assessed to improve the processing time. For the design of experiment (DOE), Taguchi’s L27 orthogonal array was used to investigate and optimize the influencing ISF process parameters. From ANOVA results, it was found that for thickness reduction, the influencing factors were as following; feed rate (21.40 %); for roughness, tool rotation speed (20.43 %) and for hardness, thicknesses of sheet (39.49 %). Response Surface Methodology (RSM) showed that optimal values obtained were 0.46 mm, 10 mm, 0.6818 mm, 2232.32 mm/min., and 2626 rpm for thickness of sheet, tool diameter, vertical step, feed rate and tool rotational speed respectively. For percentage thickness reduction of 59.6%, minimum roughness 2.09μm, and maximum hardness 41.7 BHN, the confirmatory test showed values of 64.78 % thickness reduction, roughness of 2.14μm and hardness of 44.82 BHN that were in agreement with the predicted value.

Effect of process parameters on formability in two-point incremental forming-machining of planar and twisted AA5083 blades

2022 ◽  
pp. 095440542110697
Author(s):  
Hossein Ghorbani-Menghari ◽  
Mehrdad Azadipour ◽  
Mehran Ghasempour-Mouziraji ◽  
Young Hoon Moon ◽  
Ji Hoon Kim
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Dimensional Accuracy ◽  
Numerical Control ◽  
Machining Process ◽  
Curved Surface ◽  
Forming Process ◽  
Forming Temperature ◽  
Feature Based ◽  
Tool Diameter

The deformation machining process (DMP) involves machining and incremental forming of thin structures. It can be applied for manufacturing products such as curved-surface blades without using 5-axis computerised numerical control machines. This work presents the effect of tool diameter and forming temperature on spring-back and dimensional accuracy of a simple fabricated part. The results of the first phase of the study are utilised to design the fabrication process of a curved surface blade. A feature-based algorithm is used to design the tool path for the forming process. The dimensional accuracy of the final product is improved through warm forming, two-point incremental forming, and extension of the bending zone to the outside of the product edges. The results show that DMP can be used to fabricate complex curved-surface workpieces with acceptable dimensional accuracy.

Finite Element Analysis of Incremental Sheet Forming for Metal Sheet

2018 ◽  
Vol 783 ◽  
pp. 148-153
Author(s):  
Muhammad Sajjad ◽  
Jithin Ambarayil Joy ◽  
Dong Won Jung
Keyword(s):  
Mechanical Properties ◽  
Sheet Metal ◽  
Tool Path ◽  
Incremental Forming ◽  
Single Point ◽  
Machining Process ◽  
Machining Parameters ◽  
Forming Process ◽  
Element Analysis ◽  
Tool Diameter

Incremental sheet metal forming, is a non-conventional machining process which offers higher formability, flexibility and low cost of production than the traditional conventional forming process. Punch or tool used in this forming process consecutively forces the sheet to deform locally and ultimately gives the target profile. Various machining parameters, such as type of tool, tool path, tool size, feed rate and mechanical properties of sheet metal, like strength co-efficient, strain hardening index and ultimate tensile strength, effects the forming process and the formability of final product. In this research paper, Single Point Incremental Forming was simulated using Dassault system’s Abaqus 6.12-1 and results are obtained. Results of sheet profile and there change in thickness is investigated. For this paper, we simulated the process in abaqus. The tool diameter and rotational speed is find out for the production of parts through incremental forming. The simulation is done for two type of material with different mechanical properties. Various research papers were used to understand the process of incremental forming and its simulation.

Dieless Water Jet Incremental Micro-Forming

2018 ◽  
Author(s):  
Yi Shi ◽  
Jian Cao ◽  
Kornel F. Ehmann
Keyword(s):  
Process Parameters ◽  
Thin Shell ◽  
High Speed ◽  
Single Point ◽  
Sheet Thickness ◽  
Water Jet ◽  
Micro Forming ◽  
Forming Process ◽  
Thin Foils ◽  
High Pressure Water Jet

Compared to the conventional single-point incremental forming (SPIF) processes, water jet incremental micro-forming (WJIMF) utilizes a high-speed and high-pressure water jet as a tool instead of a rigid round-tipped tool to fabricate thin shell micro objects. Thin foils were incrementally formed with micro-scale water jets on a specially designed testbed. In this paper, the effects on the water jet incremental micro-forming process with respect to several key process parameters, including water jet pressure, relative water jet diameter, sheet thickness, and feed rate, were experimentally studied using stainless steel foils. Experimental results indicate that feature geometry, especially depth, can be controlled by adjusting the processes parameters. The presented results and conclusions provide a foundation for future modeling work and the selection of process parameters to achieve high quality thin shell micro products.

Modelling of the effects of process parameters on energy consumption for incremental sheet forming process

2020 ◽  
Vol 250 ◽  
pp. 119456 ◽  
Author(s):  
Fuyuan Liu ◽  
Xiaoqiang Li ◽  
Yanle Li ◽  
Zijian Wang ◽  
Weidong Zhai ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Process Parameters ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Forming Process

Development of Tool Path Correction Algorithm in Incremental Sheet Forming

2014 ◽  
Vol 622-623 ◽  
pp. 382-389 ◽  
Author(s):  
Antonio Fiorentino ◽  
G.C. Feriti ◽  
Elisabetta Ceretti ◽  
C . Giardini ◽  
C.M.G. Bort ◽  
...  
Keyword(s):  
Tool Path ◽  
Error Distribution ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Correction Algorithm ◽  
Forming Process ◽  
Part Geometry ◽  
Toolpath Planning ◽  
The Difference ◽  
Tool Path Correction

The problem of obtaining sound parts by Incremental Sheet Forming is still a relevant issue, despite the numerous efforts spent in improving the toolpath planning of the deforming punch in order to compensate for the dimensional and geometrical part errors related to springback and punch movement. Usually, the toolpath generation strategy takes into account the variation of the toolpath itself for obtaining the desired final part with reduced geometrical errors. In the present paper, a correction algorithm is used to iteratively correct the part geometry on the basis of the measured parts and on the calculation of the error defined as the difference between the actual and the nominal part geometries. In practice, the part geometry is used to generate a first trial toolpath, and the form error distribution of the resulting part is used for modifying the nominal part geometry and, then, generating a new, improved toolpath. This procedure gets iterated until the error distribution becomes less than a specified value, corresponding to the desired part tolerance. The correction algorithm was implemented in software and used with the results of FEM simulations. In particular, with few iterations it was possible to reduce the geometrical error to less than 0.4 mm in the Incremental Sheet Forming process of an Al asymmetric part, with a resulting accuracy good enough for both prototyping and production processes.

scholarly journals Study on Thickness Thinning Ratio of the Forming Parts in Single Point Incremental Forming Process

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Mingshun Yang ◽  
Zimeng Yao ◽  
Yan Li ◽  
Pengyang Li ◽  
Fengkui Cui ◽  
...  
Keyword(s):  
Deformation Zone ◽  
Incremental Forming ◽  
Single Point ◽  
Sheet Thickness ◽  
Single Point Incremental Forming ◽  
Forming Process ◽  
Feeding Speed ◽  
Forming Angle ◽  
Tool Diameter ◽  
Thinning Rate

An excessive thickness-reducing ratio of the deformation zone in single point incremental forming of the metal sheet process has an important influence on the forming limit. Prediction of the deformation zone thickness is an important approach to control the thinning ratio. Taking the 1060 aluminum as the research object, the principle of thickness deformation in the single point incremental forming process was analyzed; the finite element model was established using ABAQUS. A formula with high accuracy to predict the deformation zone thickness was fitted with the simulation results, and the influences of process parameters, such as tool diameter, step down, feeding speed, sheet thickness, and forming angle, on thinning ratio were analyzed. The accuracy of the finite element simulation was verified by experiment. A method to control the thinning rate by changing the forming trajectory was proposed. The results showed that the obtained value by using the fitted formula is closer to the experimental results than that obtained by the sine theorem. The thinning rate of the deformation zone increases with the increase of tool diameter, forming angle, and sheet thickness and decreases with the increase of step down, while the feeding speed had no significant effect on the thinning ratio. The most important factor of the thinning ratio is the forming angle, and the thinning ratio can be effectively reduced by using the forming trajectory with a uniformly distributed pressing point.

Sign in / Sign up

Export Citation Format

Share Document