Local Strain Distribution in AlN Thick Films Analyzed by X-Ray Microdiffraction

2014 ◽  
Vol 783-786 ◽  
pp. 2016-2021
Author(s):  
Dinh Thanh Khan ◽  
Shotaro Takeuchi ◽  
Yoshiaki Nakamura ◽  
Hideto Miyake ◽  
Kazumasa Hiramatsu ◽  
...  

We investigated local strain distribution in a cross-sectional area throughout the thickness of a thick aluminum nitride (AlN) film epitaxially grown on a trench-patterned AlN/α-Al2O3 template using X-ray microdiffraction measurements for AlN and Bragg reflections. The results show that the presence of voids caused by the trench pattern strongly influences on the distribution of the strain components in the and directions, which are perpendicular to the trench lines. Discrepancy between strain values obtained from the two Bragg reflections was shown to be the result of twisting of the crystal domains about the axis in the thick AlN film.

2009 ◽  
Vol 20 (7) ◽  
pp. 075707 ◽  
Author(s):  
Berk Onat ◽  
Mine Konuk ◽  
Sondan Durukanoğlu ◽  
Gülay Dereli

2007 ◽  
Vol 86 (4) ◽  
pp. 952-958 ◽  
Author(s):  
Ross D Hansen ◽  
Dominique A Williamson ◽  
Terence P Finnegan ◽  
Brad D Lloyd ◽  
Jodie N Grady ◽  
...  

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7764
Author(s):  
Ho-Jae Lee ◽  
Eun-A Seo ◽  
Won-Woo Kim ◽  
Jun-Mo Yang ◽  
Jae-Heum Moon

In this study, we experimentally analyzed the deformation shape of stacked layers developed using three-dimensional (3D) printing technology. The nozzle traveling speed was changed to 80, 90, 100, and 110 mm/s when printing the layers to analyze its effect on layer deformation. Furthermore, the cross-sectional area and the number of layers were analyzed by printing five layers with overall dimensions of 1000 (w) × 2200 (l) × 50 (h) mm (each layer was 10 mm high) using Vernier calipers. Moreover, we analyzed the interface and cross-sectional area of layers that are difficult to confirm visually using X-ray computed tomography (X-ray CT) analysis. As a result of measuring the deformation at the center of the layer, it was confirmed that the deformation was greater for lower nozzle traveling speeds. Consequently, the X-ray CT analysis verified that the layer had the same cross-sectional area irrespective of the layer printing order at the same nozzle travel speed, even if the layer was deformed.


2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Katrin A. Dias ◽  
Joyce S. Ramos ◽  
Matthew P. Wallen ◽  
Peter S. W. Davies ◽  
Peter A. Cain ◽  
...  

Background. Increased visceral adipose tissue (VAT) is strongly associated with cardiometabolic risk factors. Accurate quantification of VAT is available through magnetic resonance imaging (MRI), which incurs a significant financial and time burden. We aimed to assess the accuracy of dual-energy X-ray absorptiometry- (DXA-) derived VAT (DXA-VAT) against a gold standard MRI protocol (MRI-VAT) in children with normal weight and obesity cross-sectionally, and over the course of a lifestyle intervention. Methodology. MRI-VAT and DXA-VAT were quantified in 61 children (30 normal weight and 31 with obesity) at baseline. Children with obesity entered a three-month exercise and/or nutrition intervention after which VAT was reassessed. MRI- and DXA-VAT cross-sectional area, volume, and mass were quantified, and associations were calculated at baseline (n = 61) and pre-post intervention (n = 28, 3 participants dropped out). Method agreement was assessed through Bland–Altman analysis, linear regression, and Passing–Bablok regression. Results. At baseline, all DXA- and MRI-VAT outcomes were strongly associated (r = 0.90, P<0.001). However, there were no significant associations between absolute or relative change in DXA- and MRI-VAT outcomes (r = 0.25–0.36, P>0.05). DXA significantly overestimated VAT CSA (cross-sectional area), volume, and mass when compared with MRI (P<0.001) at baseline. Significant proportional bias was observed for all DXA-VAT outcomes at baseline and for relative longitudinal changes in DXA-VAT. Conclusions. Although DXA-VAT outcomes were strongly associated with MRI-VAT outcomes at baseline, estimates were subject to proportional bias in children with obesity and normal weight. DXA lacks validity for detecting changes in VAT among children with obesity. This trial is registered with NCT01991106.


1994 ◽  
Vol 07 (03) ◽  
pp. 110-113 ◽  
Author(s):  
D. L. Holmberg ◽  
M. B. Hurtig ◽  
H. R. Sukhiani

SummaryDuring a triple pelvic osteotomy, rotation of the free acetabular segment causes the pubic remnant on the acetabulum to rotate into the pelvic canal. The resulting narrowing may cause complications by impingement on the organs within the pelvic canal. Triple pelvic osteotomies were performed on ten cadaver pelves with pubic remnants equal to 0, 25, and 50% of the hemi-pubic length and angles of acetabular rotation of 20, 30, and 40 degrees. All combinations of pubic remnant lengths and angles of acetabular rotation caused a significant reduction in pelvic canal-width and cross-sectional area, when compared to the inact pelvis. Zero, 25, and 50% pubic remnants result in 15, 35, and 50% reductions in pelvic canal width respectively. Overrotation of the acetabulum should be avoided and the pubic remnant on the acetabular segment should be minimized to reduce postoperative complications due to pelvic canal narrowing.When performing triple pelvic osteotomies, the length of the pubic remnant on the acetabular segment and the angle of acetabular rotation both significantly narrow the pelvic canal. To reduce post-operative complications, due to narrowing of the pelvic canal, overrotation of the acetabulum should be avoided and the length of the pubic remnant should be minimized.


2020 ◽  
Vol 0 (4) ◽  
pp. 19-24
Author(s):  
I.M. UTYASHEV ◽  
◽  
A.A. AITBAEVA ◽  
A.A. YULMUKHAMETOV ◽  
◽  
...  

The paper presents solutions to the direct and inverse problems on longitudinal vibrations of a rod with a variable cross-sectional area. The law of variation of the cross-sectional area is modeled as an exponential function of a polynomial of degree n . The method for reconstructing this function is based on representing the fundamental system of solutions of the direct problem in the form of a Maclaurin series in the variables x and λ. Examples of solutions for various section functions and various boundary conditions are given. It is shown that to recover n unknown coefficients of a polynomial, n eigenvalues are required, and the solution is dual. An unambiguous solution was obtained only for the case of elastic fixation at one of the rod’s ends. The numerical estimation of the method error was made using input data noise. It is shown that the error in finding the variable crosssectional area is less than 1% with the error in the eigenvalues of longitudinal vibrations not exceeding 0.0001.


Author(s):  
S.Sh. Gammadaeva ◽  
M.I. Misirkhanova ◽  
A.Yu. Drobyshev

The study analyzed the functional parameters of nasal breathing, linear parameters of the nasal aperture, nasal cavity and nasopharynx, volumetric parameters of the upper airways in patients with II and III skeletal class of jaw anomalies before and after orthognathic surgery. The respiratory function of the nose was assessed using a rhinomanometric complex. According to rhinoresistometry data, nasal resistance and hydraulic diameter were assessed. According to the data of acoustic rhinometry, the minimum cross-sectional area along the internal valve, the minimum cross-sectional area on the head of the inferior turbinate and nasal septum and related parameters were estimated. According to the CBCT data, the state of the nasal septum, the inferior turbinates, the nasal aperture, the state of the nasal cavity, and the linear values of the upper respiratory tract (nasopharynx) were analyzed. The patients were divided into 4 groups according to the classification of the patency of the nasal passages by


Sign in / Sign up

Export Citation Format

Share Document