Preparation and Characterizations of a-Fe2O3 Nanorods and their Properties

2016 ◽  
Vol 852 ◽  
pp. 346-348
Author(s):  
Hong Cai ◽  
Qing Bo Du ◽  
Ji Gui Xu ◽  
Hong Wei Shi ◽  
Jun Zhu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Hydrothermal Method ◽  
Magnetic Measurement ◽  
Remnant Magnetization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Fundamental Research ◽  
Scanning Electron

a-Fe2O3 nanorods over large areas were successfully synthesized by hydrothermal method, using FeCl3 as iron source and PVP as surfactant. The as-synthesized a-Fe2O3 nanorods were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and magnetic measurement system (SQUID-VSM) . The results show that the nanorods prepared by hydrothermal method with the diameter of about 70 nm and the length of about 300 nm. The magnetic properties of the synthesized nanorods were studied, and the remnant magnetization and coercivity of the α-Fe2O3 nanorods at 300K are found to be 0.07emu/g and 2300Oe, respectively. The a-Fe2O3 nanorods reported here may have opportunities for both fundamental research and technological applications.

Graphene-like nanostructures obtained from Biomass

2013 ◽  
Vol 1505 ◽  
Author(s):  
Gabriela Borin Barin ◽  
Yane Honorato Santos ◽  
Jennyfer Alves Rocha ◽  
Luiz Pereira da Costa ◽  
Antônio Gomes Souza Filho ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Hydrothermal Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Coir Dust ◽  
Coconut Coir ◽  
Scanning Electron

ABSTRACTTwo dimensional (2D) carbon nanomaterials such as few graphite layers or graphene are extensively studied due to their unique properties suitable to be exploiting in a wide range of technological applications. Recently, the growth of high quality graphene monolayers using insects and waste as carbon precursors was reported in the literature. This methodology opened a new way to convert the waste carbon into a high-value-added product. In the present work coconut coir dust, an agroindustrial biomass, was used as biotemplate for preparing carbonaceous materials. Carbon structures were synthesized through pyrolysis under nitrogen atmosphere (100mL/min) at 500, 1000, and 1500°C during 2 hours. Starting materials were coconut coir dust in natura and coconut coir dust hydrothermally treated. The samples were characterized by X-ray diffraction, Raman Spectroscopy, Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). Raman spectra showed the D band for all samples, related to the presence of defects in sp2 carbon structure and G band, indicative of graphite crystallites. It was also observed that the sample carbonized at 1500°C from coconut coir dust treated by hydrothermal method showed G’ band at 2685cm-1 associated with the stacking order along the c-axis. X-ray diffraction analysis showed a broad peak around 2θ= 22° related to the presence of amorphous carbon. By increasing the pyrolysis temperature changes in XRD diffractograms were observed and the sample which was pyrolysed at 1500°C from coconut coir dust hydrothermally treated showed peaks at 2θ= 26.5°, 43° e 45° assigned to (002), (100) (101) graphite plans, respectively. Scanning electron microscopy images showed the presence of overlapping sheets and plates. Transmission Electron Microscopy (TEM) images of coconut coir dust in natura unveiled the formation of amorphous sheet. Coconut coir dust in natura and treated by the hydrothermal method pyrolysed at 1500°C, lead to the formation of some graphitic domains and few graphene layers.

scholarly journals One-Step Thermolysis Synthesis of Divalent Transition Metal Ions Monodoped and Tridoped CdS and ZnS Luminescent Nanomaterials

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
S. E. Saeed ◽  
M. M. S. Abdel-Mottaleb ◽  
M. S. A. Abdel-Mottaleb
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Average Diameter ◽  
Transition Metal Ions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step ◽  
Fundamental Research ◽  
Scanning Electron

Mn2+, Co2+, or Ni2+monodoped CdS (or ZnS) and Mn2+-Co2+-Ni2+tridoped CdS (or ZnS) have been successfully synthesized by novel one-step thermolysis method using thiourea as a sulphur source. The synthesized nanomaterials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). It is found that the average diameter and morphology of the synthesized samples varied with the nature of dopant ion. The successful doping of Mn2+-Co2+-Ni2+tridoped ions into the host CdS (or ZnS) was proved by the EDX spectra. The luminescence of CdS is only enhanced when monodoped with Mn2+whereas it is enhanced when ZnS is either monodoped with Mn2+, Co2+, or Ni2+or tridoped with Mn2+-Co2+-Ni2+. The synthesized samples could therefore offer opportunities for further fundamental research and technological applications.

Synthesis of Monodisperse Rod-Like Nano-AlOOH and Anti-Ultraviolet Finishing on Silk-Cotton Fabrics

2013 ◽  
Vol 796 ◽  
pp. 103-106
Author(s):  
Meng Fei Xu ◽  
Min Zheng ◽  
Zuo Shan Wang ◽  
Lian Ping Zhu
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Hydrothermal Method ◽  
Average Diameter ◽  
Cotton Fabrics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Abstract: Boehmite (AlOOH) has been prepared from AlCl3·6H2O and ammonia by a hydrothermal method. The products obtained under different conditions were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM). The results show that the as-prepared AlOOH is stable, transparent, and crystalline, and it is rodlike with an average diameter of about 5 nm and a length of about 100 nm. The reaction temperature and time have important influences on the diameter and uniformity of the products. Besides, it was found that the anti-ultraviolet effect of silk-cotton fabrics was improved significantly after finishing by nano AlOOH solution.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Influence of Salt Aid on Combustion Synthesis of Nanocrystalline CeO2 Powders

2011 ◽  
Vol 412 ◽  
pp. 5-8 ◽  
Author(s):  
Ying Zhang ◽  
Ai Chen ◽  
Hai Rong Wang ◽  
Ze Song Li ◽  
Ying Ping Shen
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Combustion Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Particle Characteristics ◽  
Transmission Electron ◽  
Nanocrystalline Ceria ◽  
Scanning Electron

The present article reports the results of studies related to the synthesis of nanocrystalline ceria powder by combustion process using salt combustion aid. Cerium nitrate as oxidant and urea as fuel were used as reagents, Sodium Chloride was compared as combustion aid. The phase analysis and particle size were compared. The product was characterized by X-ray diffraction, Scanning electron microscopy and Transmission electron microscopy. The results showed that employment of starting fuel with combustion aid resulted in synthesizing nanocrystalline ceria powder with fine agglomerates. By using combustion aid, the energetics of the combustion reaction and particle characteristics have been changed.

Analyse des Stuckgipses der Abtei Villers / Analysis of Stucco from the Abbey of Villers

1997 ◽  
Vol 3 (4) ◽  
pp. 381-396
Author(s):  
S. Chandra ◽  
D. Van Gemert
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Analysis ◽  
Electron Spectroscopy ◽  
Natural Polymer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Abstract Interior plaster from the Abbot's Palace of the Abbey of Villers-la-Ville, Brabant Wallon province, Belgium has been investigated. It is done by using chemical analysis, x-ray diffraction analysis, scanning electron microscopy, energy dispersive electron spectroscopy, and transmission electron microscopy. It is found that the rendering was made with lime rich mortar and animal hairs. The sand used was very fine and the hairs were very short. The solid constituents and the hairs were uniformly dispersed, which could have been obtained by the addition of some other natural polymer, containing protein.

Morphology of Polyethylene/Montmorillonite Nanocomposites Prepared by In Situ Polymerization

2013 ◽  
Vol 457-458 ◽  
pp. 244-247
Author(s):  
Min Li ◽  
Li Guang Xiao ◽  
Hong Kai Zhao
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
In Situ Polymerization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reflection Peak ◽  
Basal Reflection ◽  
Scanning Electron

Polyethylene/montmorillonite (PE/MMT) nanocomposites were prepared by in situ polymerization. The morphology of MMT/MgCl2/TiCl4 catalyst and PE/MMT nanocomposites was investigated by scanning electron microscopy (SEM). It can be seen that MMT/MgCl2/TiCl4 catalyst remained the original MMT sheet structures and many holes were found in MMT and the morphology of PE/MMT nanocomposites is part of the sheet in the form of existence, as most of the petal structure. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were carried out to characterize all the samples. XRD results reveal that the original basal reflection peak of PEI1 and PEI2 disappears completely and that of PEI3 become very weak. MMT/MgCl2/TiCl4 catalyst was finely dispersed in the PE matrix. Instead of being individually dispersed, most layers were found in thin stacks comprising several swollen layers.

scholarly journals Preparation and Characterization of Nanostructured Hollow MgO Spheres

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 537
Author(s):  
Jishuo Han ◽  
Guohua Li ◽  
Lin Yuan
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Shell Thickness ◽  
Template Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Carbon Microsphere ◽  
Transmission Electron ◽  
Scanning Electron

Nanostructured hollow MgO microspheres were prepared by the template method. First, D-Anhydrous glucose was polymerized by the hydrothermal method to form a template. Second, a colorless solution was obtained by mixing magnesite with hydrochloric acid in a 1:2 proportion and heating in an 80 °C water bath for 2 h. Finally, the template from the first step was placed in the colorless solution, and the resulting precipitate was calcined at 550 °C for 2 h. The phase composition and microstructure of the calcined samples were characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The XRD results indicated that the main crystal is periclase. The SEM results indicates that the template carbon microsphere surface is smooth, and the its size is uniform and concentrated in the range of 100–200 nm. The diameters of the samples range from 60 to 90 nm, which is smaller than the size of the carbon microsphere. The TEM results indicates that the sample is hollow with a shell thickness of about 6–10 nm. The specific surface area of the calcined hollow sphere is 59.5 m²·g−1.

Composition and Microstructure of a Natural Nano-Structure Mineral: Six-Ring Rock

2011 ◽  
Vol 295-297 ◽  
pp. 869-872
Author(s):  
Qing Shan Li ◽  
Xin Wang ◽  
Jun Liu ◽  
Guang Zhong Xing
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive Spectrometer ◽  
The Body ◽  
X Ray Diffraction ◽  
Nano Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Nano Size ◽  
Scanning Electron

Six-ring Rock is widely used as containers of water and additives to produce health care products. In this paper, the composition and microstructure of Six-ring Rock have been investigated by using scanning electron microscopy, energy dispersive spectrometer, transmission electron microscopy, x-ray diffraction and other technologies. Results show that Six-ring Rock is composed of CaMg(CO3)2, SiO2 and KAlSi3O8. Fe atoms exist in CaMg(CO3)2 by replacing Mg atoms. Six-ring Rock shows nano-size lamellar and acerose microstructures on the surface, and nano-size monocrystals in the body. Six-ring Rock is a natural nano structure mineral.

Sign in / Sign up

Export Citation Format

Share Document