Size Controllable Synthesis and Characterization of CuO Nanostructure

2018 ◽  
Vol 915 ◽  
pp. 98-103 ◽  
Author(s):  
Duygu Candemir ◽  
Filiz Boran
Keyword(s):  
Freeze Drying ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Peg 4000 ◽  
Structure Morphology ◽  
Cuo Nanostructure

In this study, copper oxide (CuO) nanostructures were successfully prepared by adding EG (ethylene glycol) and PEG (4000, 8000) (polyethylene glycol) via an in-situ chemical precipitation method. EG and PEG (4000, 8000) were effective for changing the particular size of CuO and we examined the effects of drying type such as freeze drying, muffle and horizontal furnace on the size of CuO nanostructure. The structure, morphology and elemental analysis of CuO nanostructure were analyzed by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS). Also, the CuO nanostructures showed excellent electrical conductivity by the changing of PEG’s molecular weight and drying processes.

Synthesis and Characterization of Modified Diatomite-Leaf-Like CuO Nanosheet Composites

2018 ◽  
Vol 915 ◽  
pp. 93-97
Author(s):  
Filiz Boran
Keyword(s):  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure Morphology ◽  
Cuo Nanosheets ◽  
20 Nm ◽  
Modified Diatomite

In this work, firstly we described the effect of freeze drying on modification of raw diatomite. And then, modified diatomite-leaf-like copper oxide (CuO) nanosheet composite was successfully prepared by surfactant-free in-situ chemical precipitation method. The structure, morphology and elemental analysis of CuO nanosheets and its composite were analyzed by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), fourier transform infrared (FTIR) spectroscopy and energy dispersive X-ray spectroscopy (EDAX). Dimensions of leaf-like CuO nanosheets were approximately determined as 160 nm in width, 320 nm in length and 20 nm in thickness. According to the EDAX spectrum, leaf-like CuO nanosheets composed of Cu and O atoms without any impurity and also uniformly covered the entire surface of modified diatomite.

scholarly journals Preparation and characterization of Mn doped ZnO nanorods -=SUP=-*-=/SUP=-

2018 ◽  
Vol 60 (5) ◽  
pp. 999
Author(s):  
R. Dilber Pushpitha ◽  
L. Bruno Chandrasekar ◽  
N.M. Segu Sahuban Bathusha ◽  
R. Chandramohan ◽  
M. Karunakaran ◽  
...  
Keyword(s):  
Zno Nanorods ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Free Electrons ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Doped Zno ◽  
Mn Doped

AbstractMn doped ZnO nanorods were prepared by chemical precipitation method. The micro-structural and structural properties of the nanorods were calculated from the X-ray diffraction technique. The formed nanorods was seen in the scanning electron microscopy. The purity of the sample was confirmed by the energy dispersive X-ray analysis (EDX). The optical properties were studied using UV-Vis spectroscopy and photoluminescence. In the photoluminescence spectrum, the peaks due to recombination of free electrons, oxygen vacancy and intrinsic defects were observed. The magnetic properties were studied using vibrating sample magnetometer (VSM) and the paramagnetic nature of the material was confirmed.

Synthesis and Characterization of Fe and Fe2O3 Nanoparticles

2013 ◽  
Vol 678 ◽  
pp. 46-49 ◽  
Author(s):  
Ponnaian Peula Kumari ◽  
Rachel Oommen ◽  
Chinna Kannaiyan Senthil Kumaran ◽  
Mariyappan Thambidurai ◽  
Natarajan Muthukumarasamy ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Secondary Phase ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

Fe and Fe2 O3 nanoparticle have been synthesized by chemical precipitation method. The x-ray diffraction studies indicate the formation of Fe and Fe2 O3 nanoparticles with cubic phase and no secondary phase was observed. Surface morphology of Fe and Fe2 O3 has been studied using scanning electron microscopy (SEM). Transmission electron microscopy (TEM) images reveal that Fe and Fe2 O3 nanoparticle have size ranging from 25-41 nm.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Synthesis and photocatalytic properties of magnetic separable and recyclable p-n heterojunction CoFe2O4/Bi12O17Cl2 photocatalyst

CrystEngComm ◽  
2021 ◽  
Author(s):  
Kexin Fang ◽  
Lei Shi ◽  
Lishuang Cui ◽  
Chunwei Shi ◽  
Weiwei Si
Keyword(s):  
Chemical Precipitation ◽  
Photocatalytic Properties ◽  
Chemical Precipitation Method ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
High Crystallinity

A series of CoFe2O4/Bi12O17Cl2 (CFO/Bi12O17Cl2) nanocomposites have been prepared by chemical precipitation method. The result of X-ray diffraction showed that CFO/Bi12O17Cl2 composites had high crystallinity. It was found that CoFe2O4...

Monodisperse Fe3O4/Fe Core/Shell Nanoparticles with Enhanced Magnetic Property

2011 ◽  
Vol 306-307 ◽  
pp. 410-415
Author(s):  
Li Sun ◽  
Fu Tian Liu ◽  
Qi Hui Jiang ◽  
Xiu Xiu Chen ◽  
Ping Yang
Keyword(s):  
Average Diameter ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Shell Particles ◽  
Core Shell Nanoparticles

Core/shell type nanoparticles with an average diameter of 20nm were synthesized by chemical precipitation method. Firstly, Monodisperse Fe3O4 nanoparticles were synthesized by solvethermal method. FeSO4ž7H2O and NaBH4 were respectively dissolved in distilled water, then moderated Fe3O4 particles and surfactant(PVP) were ultrasonic dispersed into the FeSO4ž7H2O solution. The resulting solution was stirred 2 h at room temperature. Fe could be deposited on the surface of monodispersed Fe3O4 nanoparticles to form core-shell particles. The particles were characterized by using various experimental techniques, such as transmission electron microscopy (TEM), X-ray diffraction (XRD), AGM and DTA. The results suggest that the saturation magnetization of the nanocomposites is 100 emu/g. The composition of the samples show monodisperse and the sides of the core/shell nanoparticles are 20-30nm. It is noted that the formation of Fe3O4/Fe nanocomposites magnetite nanoparticles possess superparamagnetic property.

scholarly journals Synthesis and characterization of apatite silicated powders with wet precipitation method

2021 ◽  
Vol 234 ◽  
pp. 00106
Author(s):  
Houda Labjar ◽  
Hassan Chaair
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Analytical Techniques ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wet Precipitation ◽  
Scanning Electron

The synthesis of apatite silicated Ca10(PO4)6-x(SiO4)x(OH)2-x (SiHA) with 0≤x≤2 was investigated using a wet precipitation method followed by heat treatment using calcium carbonate CaCO3 and phosphoric acid H3PO4 and silicon tetraacetate SiC8H20O4 (TEOS) in medium of water ethanol, with three different silicate concentrations. After drying, the samples are ground and then characterized by different analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning electron Microscopy (SEM) and chemical analysis.

Synthesis and Characterization of the PANI/ITO Conducting Nanocomposites

2010 ◽  
Vol 663-665 ◽  
pp. 542-545 ◽  
Author(s):  
Bing Jie Zhu ◽  
Xin Wei Wang ◽  
Mei Fang Zhu ◽  
Qing Hong Zhang ◽  
Yao Gang Li ◽  
...  
Keyword(s):  
Doping Concentration ◽  
In Situ Polymerization ◽  
Synthesis And Characterization ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Maximum Conductivity ◽  
Scanning Electron

The PANI/ITO conducting nanocomposites have been synthesized by in-situ polymerization. The obtained nanocomposites were characterized by X-ray diffraction pattern, scanning electron microscopy and Fourier transform infrared. Electrical conductivity measurements on the samples pressed into pellets showed that the maximum conductivity attained 2.0 ± 0.05 S/cm for PANI/ITO nanocomposites, at ITO doping concentration of 10 wt%. The results of the present work may provide a simple, rapid and efficient approach for preparing PANI/ITO nanocomposites.

scholarly journals Characterization of the Interface Between the Bulk Glass Forming Alloy Zr41Ti14Cu12Ni10Be23 with Pure Metals and Ceramics

2000 ◽  
Vol 15 (7) ◽  
pp. 1617-1621 ◽  
Author(s):  
Jan Schroers ◽  
Konrad Samwer ◽  
Frigyes Szuecs ◽  
William L. Johnson
Keyword(s):  
Sessile Drop ◽  
Bulk Glass ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Glass Forming ◽  
Processing Times ◽  
Thermal Stability Of

The reaction of the bulk glass forming alloy Zr41Ti14Cu12Ni10Be23 (Vit 1) with W, Ta, Mo, AlN, Al2O3, Si, graphite, and amorphous carbon was investigated. Vit 1 samples were melted and subsequently solidified after different processing times on discs of the different materials. Sessile drop examinations of the macroscopic wetting of Vit 1 on the discs as a function of temperature were carried out in situ with a digital optical camera. The reactions at the interfaces between the Vit 1 sample and the different disc materials were investigated with an electron microprobe. The structure and thermal stability of the processed Vit 1 samples were examined by x-ray diffraction and differential scanning calorimetry. The results are discussed in terms of possible applications for composite materials.

Synthesis and Characterization of Tetraphenylphosphonium Tetraazidoborate

2002 ◽  
Vol 57 (6) ◽  
pp. 621-624 ◽  
Author(s):  
Wolfgang Fraenk ◽  
Heinrich Nöth ◽  
Thomas M. Klapötke ◽  
Max Suter
Keyword(s):  
Single Crystal ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray

AbstractTetraphenylphosphonium tetraazidoborate, [P(C6H5)4][B(N3)4], was obtained from B(N3)3 - in situ prepared from BH3 · O(C2H5)2 and HN3 - and [P(C6H5)4][N3]. Recrystallization from an acetonitrile / hexane mixture yielded colorless crystals in 60% yield. The molecular structurewas determined by single crystal X-ray diffraction and the [B(N3)4]- anionwas shown to possess S4 symmetry.

Sign in / Sign up

Export Citation Format

Share Document