Monodisperse Fe3O4/Fe Core/Shell Nanoparticles with Enhanced Magnetic Property

2011 ◽  
Vol 306-307 ◽  
pp. 410-415
Author(s):  
Li Sun ◽  
Fu Tian Liu ◽  
Qi Hui Jiang ◽  
Xiu Xiu Chen ◽  
Ping Yang
Keyword(s):  
Average Diameter ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Shell Particles ◽  
Core Shell Nanoparticles

Core/shell type nanoparticles with an average diameter of 20nm were synthesized by chemical precipitation method. Firstly, Monodisperse Fe3O4 nanoparticles were synthesized by solvethermal method. FeSO4ž7H2O and NaBH4 were respectively dissolved in distilled water, then moderated Fe3O4 particles and surfactant(PVP) were ultrasonic dispersed into the FeSO4ž7H2O solution. The resulting solution was stirred 2 h at room temperature. Fe could be deposited on the surface of monodispersed Fe3O4 nanoparticles to form core-shell particles. The particles were characterized by using various experimental techniques, such as transmission electron microscopy (TEM), X-ray diffraction (XRD), AGM and DTA. The results suggest that the saturation magnetization of the nanocomposites is 100 emu/g. The composition of the samples show monodisperse and the sides of the core/shell nanoparticles are 20-30nm. It is noted that the formation of Fe3O4/Fe nanocomposites magnetite nanoparticles possess superparamagnetic property.

scholarly journals Luminescence Nanothermometry Based on Pr3+ : LaF3 Single Core and Pr3+ : LaF3/LaF3 Core/Shell Nanoparticles

2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
M. S. Pudovkin ◽  
D. A. Koryakovtseva ◽  
E. V. Lukinova ◽  
S. L. Korableva ◽  
R. Sh. Khusnutdinova ◽  
...  
Keyword(s):  
Coherent Scattering ◽  
Core Shell ◽  
Fluorescence Intensity Ratio ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
The Core ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
Core Shell Nanoparticles

Core Pr3+ : LaF3 (CPr = 1%) plate-like nanoparticles (nanoplates), core/shell Pr3+ : LaF3 (CPr = 1%)/LaF3 nanoplates, core Pr3+ : LaF3 (CPr = 1%) sphere-like nanoparticles (nanospheres), and core/shell Pr3+ : LaF3 (CPr = 1%)/LaF3 nanospheres were synthesized via the coprecipitation method of synthesis. The nanoparticles (NPs) were characterized by means of transmission electron microscopy, X-ray diffraction, and optical spectroscopy. The formation of the shell was proved by detecting the increase in physical sizes, sizes of coherent scattering regions, and luminescence lifetimes of core/shell NPs comparing with single core NPs. The average physical sizes of core nanoplates, core/shell nanoplates, core nanospheres, and core/shell nanospheres were 62.2 ± 0.9, 74.7 ± 1.2, 13.8 ± 0.9 and 22.0 ± 1.2 nm, respectively. The formation of the NP shell led to increasing of effective luminescence lifetime τeff of the 3P0 state of Pr3+ ions for the core nanoplates, core/shell nanoplates, core nanospheres, and core/shell nanospheres the values of τeff were 2.3, 3.6, 3.2, and 4.7 μsec, respectively (at 300 K). The values of absolute sensitivity Sa for fluorescence intensity ratio (FIR) thermometry was 0.01 K−1 at 300 K for all the samples. The FIR sensitivity can be attributed to the fact that 3P1 and 3P0 states share their electronic populations according to the Boltzmann process. The values of Sa for lifetime thermometry for core nanoplates, core/shell nanoplates, core nanospheres, and core/shell nanospheres were (36.4 ± 3.1) · 10−4, (70.7 ± 5.9) · 10−4, (40.7 ± 2.6) · 10−4, and (68.8 ± 2.4) · 10−4 K−1, respectively.

Controlled Growth of ZnO Nanocrystals on the Surface of SiO2 Spheres

2009 ◽  
Vol 151 ◽  
pp. 264-268 ◽  
Author(s):  
Yuliya V. Yermolayeva ◽  
Yuriy N. Savin ◽  
Alexander V. Tolmachev
Keyword(s):  
Average Diameter ◽  
Core Shell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Zno Nanocrystals ◽  
Transmission Electron ◽  
Zno Particles ◽  
One Step ◽  
Shell Particles ◽  
Sio2 Spheres

The “islands” of ZnO nanocrystals on amorphous monodisperse 200 nm SiO2 spheres (core-shell particles) were obtained by simple one-step technique based on low-temperature crystallization from liquid phase. The influence of starting reagents types and concentration of zinc ions in the reaction mixture on the morphology of ZnO shells obtained was studied. Crystalline structure of ZnO nanocrystals obtained was proofed by the X-ray diffraction data. The average diameter of ZnO nanocrystals on SiO2 spheres is 10 nm according to X-ray diffraction (XRD) and transmission electron microscopy (TEM) data. It was shown that SiO2/ZnO particles obtained have high luminescence characteristics. Photoluminescence spectra of core-shell SiO2/ZnO particles show two emission peaks centred at 386 nm and 570 nm. Core-shell SiO2/ZnO particles obtained are perspective for active photonic crystals creation for UV-spectral region.

Fe3O4@ZrO2 magnetic nanoparticles as a new electrode material for sensitive determination of organophosphorus agents

2015 ◽  
Vol 7 (12) ◽  
pp. 5053-5059 ◽  
Author(s):  
Na-Na Li ◽  
Tian-Fang Kang ◽  
Jing-Jing Zhang ◽  
Li-Ping Lu ◽  
Shui-Yuan Cheng
Keyword(s):  
Photoelectron Spectroscopy ◽  
Magnetic Core ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Sensitive Determination ◽  
Core Shell Nanoparticles

In this study, Fe3O4@ZrO2 magnetic core–shell nanoparticles (NPs) were synthesized and were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS).

Core-Shell SiO2/Ag Composite Spheres Prepared by Electrical Exploding Wire Plasma Technique: Synthesis and Characterization

2021 ◽  
Vol 19 (10) ◽  
pp. 82-88
Author(s):  
Duaa A. Uamran ◽  
Qasim Hassan Ubaid ◽  
Hammad R. Humud
Keyword(s):  
Laser Pulse ◽  
Laser Pulses ◽  
Structural Features ◽  
Optical Absorption Spectroscopy ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Photocatalytic Activities ◽  
Core Shell Nanoparticles

Core-shell nanoparticles (SiO2/Ag) were manufactured by using a two-step process: Electric detonation of Ag. Wire in colloidal solution particles then by using laser pulses, nanoparticles are released. The structural features of these nanoparticles were checked by using X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). The (XRD) study showed the progressive coverage of SiO2/Ag by nanoparticles according to the energies of the laser pulse. Measurements of morphology and EDX confirmed the Core/shell structure with particle size at the nano level. It confirmed that preliminary analysis consists of a SiO2 core and an Ag shell from FESEM. The surface of the microscopic balls (SiO2) has been covered completely and homogeneously with Ag nanoparticles, Moreover, Ultraviolet-Visible, and by optical absorption spectroscopy, the Nanoparticles with core crust SiO2/Ag showed excellent photocatalytic activities at various concentrations and laser pulse energy.

The Preparation and Characteristic of Superparamagnetic Core/Shell Nanoparticles

2013 ◽  
Vol 274 ◽  
pp. 432-435
Author(s):  
Hong Xia Shen ◽  
Zheng Zhi Yin ◽  
Qiong Cheng
Keyword(s):  
Biomedical Applications ◽  
Superparamagnetic Nanoparticles ◽  
Bioactive Molecules ◽  
Core Shell ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Transmission Electron ◽  
Vibration Sample Magnetometer ◽  
Diffraction Patterns ◽  
Core Shell Nanoparticles

Superparamagnetic core/shell nanoparticles have been prepared successfully by the reduction of Au3+ onto the surface of superparamagnetic nanoparticles. The core/shell nanoparticles were characterized by Transmission electron microscopy (TEM), X-ray powder diffraction patterns (XRD), UV–vis spectrophotometer, Vibration Sample Magnetometer(VSM) and micro-confocal Raman system. The results revealed that the prepared core/shell nanoparticles were covered by Au shell. These superparamagnetic nanoparticles can be highly sensitively detected and afford new opportunities for biomedical applications through chemical bonding of bioactive molecules with the Au shell of nanoparticles.

Preparation of Amorphous Calcium Phosphate/Triclcium Silicate Composite Powders

2009 ◽  
Vol 79-82 ◽  
pp. 1643-1646 ◽  
Author(s):  
Qing Lin ◽  
Yan Bao Li ◽  
Xiang Hui Lan ◽  
Chun Hua Lu ◽  
Zhong Zi Xu
Keyword(s):  
Calcium Phosphate ◽  
Shell Structure ◽  
Amorphous Calcium Phosphate ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Composite Powders ◽  
X Ray ◽  
Core Shell Structure

The amorphous calcium phosphate (ACP)/tricalcium silicate (Ca3SiO5, C3S) composite powders were synthesized in this paper. The exothermal behavior of C3S determined by isothermal conduction calorimetry indicated that the ACP could be synthesis by chemical precipitation method during the induction period (stage II) of C3S. The composite powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). The results indicated that nanosized ACP particles deposited on the surface of C3S particles to form core-shell structure at pH=10.5, and the nCa/nP of ACP could be controlled between 1.0 and 1.5. The core-shell structure is stable after sintered at 500 oC for 3 h to remove the β-cyclodextrin (β-CD). As compared with the irregular C3S particles (1~5 μm), the composite powders particles are spherical with a diameter of 40~150 μm. Therefore, to obtain the smaller size of composite powders, it is expected to avoid the aggregate of C3S particles in the aqueous solution by addition of dispersant. As compared with C3S, the composite powders may contribute better injectability, strength and biocompatibility.

Synthesis of Co@Au Core-Shell Nanoparticles in Non-Aqueous Solution and their Characterization

2004 ◽  
Vol 818 ◽  
Author(s):  
Zhihui Ban ◽  
C. J. O'Connor
Keyword(s):  
Aqueous Solution ◽  
Quantum Interference ◽  
Au Nanoparticles ◽  
Magnetic Measurements ◽  
Core Shell ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
Transmission Electron ◽  
Average Size ◽  
Core Shell Nanoparticles

AbstractA homogeneous non-aqueous solution reactions method has been developed to prepare gold-coated cobalt (Co@Au) nanoparticles. After the sample was washed with 8% HCl, XRD (X-Ray Diffraction), TEM (transmission electron microscopy), and magnetic measurements SQUID (Superconducting Quantum Interference Device) are utilized to characterize the nanocomposites. XRD shows the pattern of sample, which is responding to gold and cobalt, no cobalt oxide was found. TEM results show that the average size of Co@Au nanoparticles is about 10 nm and we can find core-shell structure of the sample. SQUID results show that the particles are ferromagnetic materials at 300K. So the gold- coated cobalt nanoparticles (Co@Au) can be successfully prepared by the homogeneous nonaqueous approach. This kind of core-shell materials is stable in acid condition, which would give many opportunities for bio- application.

Synthesis and Characterization of Fe/Nd2O3 Core–Shell Nanoparticles by Hydrogen Plasma-Metal Reaction

2006 ◽  
Vol 6 (3) ◽  
pp. 743-747 ◽  
Author(s):  
Tong Liu ◽  
Shicheng Zhang ◽  
Xingguo Li
Keyword(s):  
Hydrogen Plasma ◽  
Core Shell ◽  
Shell Nanoparticles ◽  
X Ray ◽  
Nanoparticle Surface ◽  
Transmission Electron ◽  
Potential Applications ◽  
Catalytic Fields ◽  
Core Shell Nanoparticles

Fe/Nd2O3 core–shell nanoparticles (CSNs) with a mean diameter of 35 nm were produced successfully by using hydrogen plasma-metal reaction (HPMR) method. This core–shell structure was confirmed by high resolution transmission electron microscopy (HRTEM), energy dispersion X-ray spectroscopy (EDS), X-ray photoelectron spectral (XPS), and induction-coupled plasma (ICP) spectroscopy. The magnetic properties were measured by vibrating sample magnetometer (VSM). It was found that the mole ratio of Nd to Fe on the nanoparticle surface is 1.2:1, about 7 times of that of the whole nanoparticle. The saturation magnetization Ms and remanence Mr of Fe/Nd2O3 nanoparticles decrease prominently from Fe nanoparticles, whereas the coercivity HC drops only less than 5% of Fe nanoparticle. These CSNs have potential applications in magnetic and catalytic fields.

Preparation and Characterization of Nickel(Ni)-Silver(Ag) Core-Shell Nanoparticles for Conductive Pastes

2012 ◽  
Vol 531 ◽  
pp. 211-214 ◽  
Author(s):  
Jun Jie Jing ◽  
Ji Min Xie ◽  
Hui Ru Qin ◽  
Wen Hua Li ◽  
Ming Mei Zhang
Keyword(s):  
Electron Microscopy ◽  
Inductively Coupled Plasma ◽  
Water Solution ◽  
Average Diameter ◽  
Core Shell ◽  
Ni Nanoparticles ◽  
Shell Nanoparticles ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Core Shell Nanoparticles

Nickel(Ni)-silver(Ag) core-shell nanoparticles with different shell thickness were synthesized with Ni nanoparticles by liquid phase reduction technique form water solution. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and inductively coupled plasma spectroscopy (ICP). The results showed that the Ni nanoparticles are in sphere shape and the average diameter is 104nm , the nickel(Ni)-silver(Ag) core-shell nanoparticles has good crystallinity and the thinkness of Ag nanoshells could be effectively controlled by changing the concentration of silver nitrate. The product can be used for nickel-based conductive paste preparation because of the surface character of Ag and the magnetic property of Ni

Synthesis and Characterization of Carbon-Encapsulated Nickel Nanoparticles from De-Oiled Asphalt

2013 ◽  
Vol 652-654 ◽  
pp. 202-205
Author(s):  
Jun Yu ◽  
Bing She Xu
Keyword(s):  
Nickel Nanoparticles ◽  
Carbon Matrix ◽  
Core Shell ◽  
Ni Nanoparticles ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
Nickel Powders ◽  
Transmission Electron ◽  
Core Shell Nanoparticles

Carbon-encapsulated Ni nanoparticles with the size of 5 to 30 nm were synthesized from de-oiled asphalt (DOA) by heat-treatment at 1800 °C with nickel powder. The nanoparticles exhibited well-constructed core-shell structures, with Ni cores and graphitic shells. High resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) examinations confirmed that the carbon-encapsulated Ni nanoparticles were uniformly dispersed in carbon matrix and the Ni nanoparticles were surrounded by several carbon layers with well ordered arrangement. The formation of the core-shell nanoparticles was selectively controlled by adjusting the ratio of de-oiled asphalt to nickel powders. The possible growth model for the carbon-encapsulated Ni nanoparticles was discussed briefly. This result presents a simple and controllable way to synthesize carbon-encapsulated nickel nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document