Structural and Electrical Conductivity Studies in Nickel Ferrite Nano-Particles

2013 ◽  
Vol 209 ◽  
pp. 177-181 ◽  
Author(s):  
Ram S. Barkule ◽  
D.V. Kurmude ◽  
A.V. Raut ◽  
N.N. Waghule ◽  
K.M. Jadhav ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Nickel Ferrite ◽  
Sol Gel ◽  
Chelating Agent ◽  
Average Crystallite Size ◽  
Combustion Method ◽  
Nano Particles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

Abstract: The magnetic nano-particles of nickel ferrite were synthesized successfully by sol-gel auto-combustion method using high purity metal nitrates and citric acid as chelating agent. The as prepared powder of nickel ferrite was sintered at 5500C for 5 hr to obtain good crystalline phase and was used for further study. The X-ray diffraction technique was employed to confirm the single phase formation of nickel ferrite nano-particles. The X-ray diffraction pattern shows the Bragg’s peak which belongs to cubic spinel structure. The values of lattice constant, X-ray density, oxygen parameter and radii of tetrahedral and octahedral sites were calculated from XRD data. The average crystallite size was estimated using Scherrer’s formula and found to be 6 nm. The temperature dependence of the electrical conductivity plot shows the kink, which can be attributed to ferromagnetic-paramagnetic transition. The activation energy obtained from resistivity plots in paramagnetic region is found to be more than that in ferrimagnetic region. The conduction mechanism in these nickel ferrite nano-particles has been discussed on the basis of hopping of electrons.

scholarly journals Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization

Cerâmica ◽  
2019 ◽  
Vol 65 (374) ◽  
pp. 274-281 ◽  
Author(s):  
S. S. Satpute ◽  
S. R. Wadgane ◽  
S. R. Kadam ◽  
D. R. Mane ◽  
R. H. Kadam
Keyword(s):  
Electron Microscopy ◽  
Sol Gel ◽  
Electrical Characterization ◽  
Combustion Method ◽  
Hexagonal Structure ◽  
Strontium Hexaferrite ◽  
X Ray Diffraction ◽  
X Ray ◽  
Morphological Studies ◽  
Auto Combustion

Abstract Y3+ substituted strontium hexaferrites having chemical composition SrYxFe12-xO19 (x= 0.0, 0.5, 1.0, 1.5) were successfully synthesized by sol-gel auto-combustion method. The structural and morphological studies of prepared samples were investigated by using X-ray diffraction technique, energy dispersive X-ray spectroscopy, field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy. The X-ray diffraction pattern confirmed the single-phase hexagonal structure of yttrium substituted strontium ferrite and the lattice parameters a and c increased with the substitution of Y3+ ions. The crystallite size also varied with x content from 60 to 80 nm. The morphology was studied by FE-SEM, and the grain size of nanoparticles ranged from 44 to 130 nm. The magnetic properties were investigated by using vibrating sample magnetometer. The value of saturation magnetization decreased from 49.60 to 35.40 emu/g. The dielectric constant decreased non-linearly whereas the electrical dc resistivity increased with the yttrium concentration in strontium hexaferrite.

scholarly journals Green synthesis and characterization of hexaferrite strontium-perovskite strontium photocatalyst nanocomposites

2020 ◽  
Vol 43 (1) ◽  
pp. 26-42 ◽  
Author(s):  
Zahra Hajian Karahroudi ◽  
Kambiz Hedayati ◽  
Mojtaba Goodarzi
Keyword(s):  
Magnetic Properties ◽  
Green Synthesis ◽  
Sol Gel ◽  
Synthesis Method ◽  
Combustion Method ◽  
Lemon Juice ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion

AbstractThis study presents a preparation of SrFe12O19– SrTiO3 nanocomposite synthesis via the green auto-combustion method. At first, SrFe12O19 nanoparticles were synthesized as a core and then, SrTiO3 nanoparticles were prepared as a shell for it to manufacture SrFe12O19–SrTiO3 nanocomposite. A novel sol-gel auto-combustion green synthesis method has been used with lemon juice as a capping agent. The prepared SrFe12O19–SrTiO3 nanocomposites were characterized by using several techniques to characterize their structural, morphological and magnetic properties. The crystal structures of the nanocomposite were investigated via X-ray diffraction (XRD). The morphology of SrFe12O19– SrTiO3 nanocomposite was studied by using a scanning electron microscope (SEM). The elemental composition of the materials was analyzed by an energy-dispersive X-ray (EDX). Magnetic properties and hysteresis loop of nanopowder were characterized via vibrating sample magnetometer (VSM) in the room temperature. Fourier transform infrared spectroscopy (FTIR) spectra of the samples showed the molecular bands of nanoparticles. Also, the photocatalytic behavior of nanocomposites has been checked by the degradation of azo dyes under irradiation of ultraviolet light.

Effect of Annealing Temperature of CoCr2O4 on Structural and Vibrational Properties

2019 ◽  
Vol 11 (11) ◽  
pp. 1079-1081 ◽  
Author(s):  
Prachi Joshi ◽  
Pallavi Saxena ◽  
M. D. Varshney ◽  
V. N. Rai ◽  
A. Mishra
Keyword(s):  
Calcination Temperature ◽  
Sol Gel ◽  
Average Crystallite Size ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
Auto Combustion ◽  
Different Temperatures ◽  
Disorder Effect ◽  
High Calcination Temperature

CoCr2O4 nanoparticles were prepared by low-temperature sol–gel auto combustion method. In this paper, we have investigated the structural behavior of CoCr2O4 nanoparticles annealed at two different temperatures (600 °C and 800 °C). From the X-ray diffraction (XRD) pattern of CoCr2O4, we have found that there is no change in crystalline structure and it was indexed in the cubic spinel structure with space group Fd3m. It was observed that average crystallite size increases with calcination temperature. High calcination temperature reduced the noise level and enhanced the accuracy of calculated parameters. For both the samples of CoCr2O4, we observed Raman scattering modes at around 471, 516, 539, 561, 590, 626 and 688 cm–1. The additional modes in vibrational spectra appear due to the disorder effect.

scholarly journals Structural, Optical, and Catalytic Properties of MgCr2O4 Spinel-Type Nanostructures Synthesized by Sol–Gel Auto-Combustion Method

Catalysts ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1476
Author(s):  
Vasyl Mykhailovych ◽  
Andrii Kanak ◽  
Ştefana Cojocaru ◽  
Elena-Daniela Chitoiu-Arsene ◽  
Mircea Nicolae Palamaru ◽  
...  
Keyword(s):  
Tartaric Acid ◽  
Catalytic Properties ◽  
Spinel Phase ◽  
Sol Gel ◽  
Combustion Method ◽  
Temperature Treatment ◽  
X Ray Diffraction ◽  
Spinel Type ◽  
X Ray ◽  
Auto Combustion

Spinel chromite nanoparticles are prospective candidates for a variety of applications from catalysis to depollution. In this work, we used a sol–gel auto-combustion method to synthesize spinel-type MgCr2O4 nanoparticles by using fructose (FS), tartaric acid (TA), and hexamethylenetetramine (HMTA) as chelating/fuel agents. The optimal temperature treatment for the formation of impurity-free MgCr2O4 nanostructures was found to range from 500 to 750 °C. Fourier transform infrared (FTIR) spectroscopy was used to determine the lattice vibrations of the corresponding chemical bonds from octahedral and tetrahedral positions, and the optical band gap was calculated from UV–VIS spectrophotometry. The stabilization of the spinel phase was proved by X-ray diffraction (XRD) and energy-dispersive X-ray (EDX) analysis. From field-emission scanning electron microscopy (FE-SEM), we found that the size of the constituent particles ranged from 10 to 40 nm. The catalytic activity of the as-prepared MgCr2O4 nanocrystals synthesized by using tartaric acid as a chelating/fuel agent was tested on the decomposition of hydrogen peroxide. In particular, we found that the nature of the chelating/fuel agent as well as the energy released during the auto-combustion played an important role on the structural, optical, and catalytic properties of MgCr2O4 nanoparticles obtained by this synthetic route.

Study of the magnetic and structural properties of Al–Cr codoped Y-type hexaferrite prepared via sol–gel auto-combustion method

2015 ◽  
Vol 29 (14) ◽  
pp. 1550090 ◽  
Author(s):  
O. Mirzaee ◽  
R. Mohamady ◽  
A. Ghasemi ◽  
Y. Alizad Farzin
Keyword(s):  
Magnetic Properties ◽  
Sol Gel ◽  
Combustion Method ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hexagonal Shape ◽  
Auto Combustion ◽  
Xrd Patterns ◽  
Cr Doping

Nanostructure of Y-type hexaferrite with composition of Sr 2 Ni 2 Al x/2 Cr x/2 Fe 12-x O 22 (where x are 0, 0.6, 1.2, 1.8, 2.4 and 3) were prepared by sol–gel auto-combustion method. The influence of Al and Cr doping on the structural and magnetic properties has been investigated. The X-ray diffraction (XRD) patterns confirm phase formation of Y-type hexaferrite. The microstructure and morphology of prepared samples were studied by high resolution field emission scanning electron microscope (FESEM) which shows the hexagonal shape for all of the samples. Magnetic properties were characterized using vibrating sample magnetometer (VSM). The magnetic results revealed that by increasing the Al and Cr to the structure, the coercivity was also increased from 840 Oe to 1160 Oe. Moreover it has been shown that with addition of dopants, saturation magnetization (Ms) and remnant magnetization (Mr) were decreased from 39.61 emu/g to 30.11 emu/g and from 17.51 emu/g to 14.62 emu/g, respectively, due to the entrance of nonmagnetic ions into Fe 3+ sites.

Magnetic Properties and Unusual Morphologies of Barium Ferrites Prepared by Electrospinning and Sol-Gel Auto-Combustion Method

2015 ◽  
Vol 815 ◽  
pp. 141-146 ◽  
Author(s):  
Gui Fang Liu ◽  
Run Hua Fan ◽  
Ke Lan Yan ◽  
Xu Ai Wang ◽  
Kai Sun ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Barium Ferrite ◽  
Raw Materials ◽  
Sol Gel ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Auto Combustion ◽  
Electrospinning Method ◽  
Barium Ferrites

Barium ferrite fibers and barium ferrite powders were successfully prepared respectively via Electrospinning method and sol-gel auto-combustion method by using Fe (NO3)3·9H2O, Ba (NO3)2 as one of the main raw materials. X-ray diffraction (XRD) and field emission scanning electron microscope (FSEM) were used to study the phase composition and microstructure of barium ferrite. The results showed that barium ferrite fibers consist of a mixture of barium ferrite particles, the diameter of fibers is about 200 nm; barium ferrite powders prepared by sol-gel auto-combustion method were flake barium ferrite compositing of rod-like grains of less than 100 nm in size stacking disorderly. Magnetic properties were investigated by vibrating sample magnetometer (VSM), the results showed that the values of Mr, Ms, and Hc of barium ferrite fibers and powders are quite different due to their different morphologies.

scholarly journals Synthesis of Mg-Ferrite nanoparticles via auto combustion method and investigation their structural, morphological and magnetic properties

2019 ◽  
Vol 24 (7) ◽  
pp. 52
Author(s):  
Ibrahim F. Waheed ◽  
Faiz M. AL-Abady ◽  
Baidaa M. Ali
Keyword(s):  
Sol Gel ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
Small Particles ◽  
Sem Images ◽  
X Ray ◽  
Ferrite Structure ◽  
Auto Combustion ◽  
Ft Ir ◽  
Crystalline Microstructure

Magnesium ferrite (MgFe2O4) nanoparticles is prepared by sol-gel auto combustion method and calcinated at (200,450, 900) °C. The capping agent was urea and (Mg(NO3)2.6H2O) and (Fe(NO3)3.9H2O) nitrates as sources of metal. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) characteristic show clear modes of the cubic Mg-ferrite structure formation. Infrared spectrum of metal-oxygen vibration at (703-636) and (574-433) cm−1 show the tetrahedral and octahedral site of Mg-ferrite structure. Scanning Electron Microscope (SEM) images shown pure crystalline microstructure with polyhedral shapes and very small numbers of globular small particles. The crystallite size of Mg-ferrite is calculated using Debye-Scherrer relation and was in the range of 29 nm.   http://dx.doi.org/10.25130/tjps.24.2019.129

scholarly journals Nanosized LaCo0.6Fe0.4O3 perovskites synthesized by citrate sol gel auto combustion method

2014 ◽  
Vol 8 (2) ◽  
pp. 87-92 ◽  
Author(s):  
Unikoth Megha ◽  
Karakat Shijina ◽  
George Varghese
Keyword(s):  
Sol Gel ◽  
Combustion Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dense Microstructure ◽  
Metal Nitrates ◽  
Average Grain Size ◽  
Auto Combustion ◽  
Different Temperatures ◽  
Lcr Meter

LaCo0.6Fe0.4O3 (LCFO) nanopowder was synthesized from constituent metal nitrates, citric acid and ethylene glycol by citrate sol gel autocombustion method and calcined at different temperatures. The powders were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX) and Fourier transform infrared spectra (FTIR), whereas dielectric properties were investigated with LCR-meter. The FTIR spectra, taken for the xerogel and the sample calcined at 1000?C, confirm that the organic groups were removed during calcination and oxide structure was formed. The XRD result shows that LCFO has rhombhohedral crystal structure with R-3C space group and forms single phase after calcination at 600?C. The activation energy of crystallite growth, determined from the Arrhenius plot, was 17?2 kJ/mol. Surface feature studies of the powders were obtained from SEM. At 1000?C, dense microstructure with wellshaped grain boundaries was obtained and the average grain size was around 400 nm. EDAX confirms the elemental composition. Finally, from the dielectric studies, it was found that the dielectric constant (?r) as well as dielectric loss tangent (tan ?) decreases with increase in frequency.

scholarly journals Structural and Magnetic Studies of Cr3+ Substituted Nickel Ferrite Nanomaterials Prepared by Sol-Gel Auto-Combustion

Crystals ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 384 ◽  
Author(s):  
Jinpei Lin ◽  
Yun He ◽  
Xianglin Du ◽  
Qing Lin ◽  
Hu Yang ◽  
...  
Keyword(s):  
Nickel Ferrite ◽  
Magnetic Hyperfine Field ◽  
Sol Gel ◽  
Combustion Method ◽  
Lattice Parameter ◽  
Nano Particles ◽  
Magnetic Studies ◽  
Auto Combustion ◽  
Phase Spinel ◽  
Cr Concentration

The present study envisages the preparation of chromium substituted Nickel ferrite NiCrxFe2−xO4 (x = 0~1.0) powders by a sol-gel auto-combustion method. X-ray diffraction analysis (XRD) showed that the specimens with x > 0.2 exhibited a single-phase spinel structure, and that more content of Cr within a specimen is favorable for the synthesis of pure Ni-Cr ferrites. The lattice parameter decreased with an increase in the Cr concentration. The sample without calcining exhibited a good crystallinity. Scanning Electron Microscopy (SEM) showed the formation of ferrite powders nano-particles, and that the substitution of Cr weakened the agglomeration between the particles. Mössbauer spectra of NiCrxFe2−xO4 showed two normal Zeeman-split sextets that displayed a ferrimagnetic behavior. Furthermore, the spectra indicated that iron was in the Fe3+ state, and the magnetic hyperfine field at the tetrahedral tended to decrease with an increase in the Cr substitution. The saturation magnetization decreased by the Cr3+ ions, and reached a minimum value (Ms = 4.46 emu/g). With an increase in the annealing temperature, the coercivity increased initially, which later decreased.

Sign in / Sign up

Export Citation Format

Share Document