IN VITRO DEGRADATION OF MIMOSINE BY MICROORGANISMS FROM THE ESOPHAGEAL SAC OF VOLES (Microtus arvalis)

1986 ◽  
Vol 66 (2) ◽  
pp. 547-551 ◽  
Author(s):  
H. KUDO ◽  
K.-J. CHENG ◽  
W. MAJAK ◽  
J. W. HALL ◽  
T. ARAI ◽  
...  

The microbiota in the esophageal sac of voles fed either cubed alfalfa hay or concentrate pellets were assayed to determine their capacity to anaerobically degrade mimosine in vitro. Differences (P < 0.01) were found between the two diets during the growth phase. The sac contents of voles fed concentrate pellets degraded mimosine and 3-hydroxy-4-(1H)-pyridone (DHP) rapidly, but inocula from voles fed cubed alfalfa hay only hydrolyzed mimosine to DHP. Degradation of the pyridine ring occurred at the early stage of incubation, concurrently with microbial growth. Thereafter, degradation rates appear to have been almost negligible and very similar for both diets. These results agree with previous data obtained with ruminal microorganisms, where highly active inocula were also associated with animals on concentrate diets. Key words: Detoxification, hydrolysis, esophageal sac, mimosine, 3-hydroxy-4- (1H)-pyridone, voles

Materials ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 184 ◽  
Author(s):  
Radka Gorejová ◽  
Renáta Oriňaková ◽  
Zuzana Orságová Králová ◽  
Matej Baláž ◽  
Miriam Kupková ◽  
...  

Research in the field of biodegradable metallic scaffolds has advanced during the last decades. Resorbable implants based on iron have become an attractive alternative to the temporary devices made of inert metals. Overcoming an insufficient corrosion rate of pure iron, though, still remains a problem. In our work, we have prepared iron foams and coated them with three different concentrations of polyethyleneimine (PEI) to increase their corrosion rates. Scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), Fourier-transform infrared spectroscopy (FT-IR), and Raman spectroscopy were used for characterization of the polymer coating. The corrosion behavior of the powder-metallurgically prepared samples was evaluated electrochemically using an anodic polarization method. A 12 weeks long in vitro degradation study in Hanks’ solution at 37 °C was also performed. Surface morphology, corrosion behavior, and degradation rates of the open-cell foams were studied and discussed. The use of PEI coating led to an increase in the corrosion rates of the cellular material. The sample with the highest concentration of PEI film showed the most rapid corrosion in the environment of simulated body fluids.


Author(s):  
Stephanie Grenier ◽  
Peter A. Torzilli ◽  
Madhu Bhargava

Osteoarthritis (OA) is a disease characterized by the degeneration of articular cartilage. Disease progression is associated with the irreversible cleavage of the collagen network, surface fibrillation and loss of proteoglycans from the extracellular matrix.1, 2 These matrix changes increase surface porosity and matrix permeability, which diminish the cartilage’s ability to resist joint compressive loading. In this study, we developed an in vitro degradation model to emulate the damage that occurs in early OA in order to study how damage affects the tissue’s biomechanical function.


Metals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 586
Author(s):  
Ana Laura Ramirez–Ledesma ◽  
Paola Roncagliolo–Barrera ◽  
Carlo Paternoster ◽  
Riccardo Casati ◽  
Hugo Lopez ◽  
...  

In recent years, increasing interest has been placed in the development of Zn alloys for absorbable biomedical applications. It has been demonstrated that these alloys are potential candidates for endovascular applications. In the present work, a novel Zn-12.5Ag-1Mg alloy was investigated as a potential biomedical absorbable material. As a reference, the exhibited biocompatible properties are compared with those of pure Zn and a Zn-1Mg alloy. All the alloys investigated in this work were cast in a water-cooled Cu-mold (chill casting). Subsequently, the alloys were solution-treated and then extruded. The microstructural evolution at each stage of the alloy processing was resolved by analytical means including optical, scanning, transmission microscopy, and X-ray diffraction. By these means, the various phases belonging to this alloy system were disclosed. In addition, determinations of both corrosion and mechanical properties were carried out in the proposed Zn-12.5Ag-1Mg alloy. In particular, an excellent combination of strength and ductility was found, which is attributed to grain refinement as well as the precipitation of a uniform distribution of refined phases (i.e., AgZn solid solution, ε-AgZn3, and Ag0.15MgZn1.85 intermetallics). All the precipitated intermetallics were embedded in a η-Zn matrix. As for the corrosion degradation in the physiological NaCl solution in the as-extruded condition, the experimental outcome indicates that the Zn-12.5Ag-1Mg alloy exhibits degradation rates far superior to currently reported ones for Zn-based alloys intended for absorbable biomedical applications.


1997 ◽  
Vol 299 (1-2) ◽  
pp. 99-101 ◽  
Author(s):  
Kjell M. Vårum ◽  
Mildrid M. Myhr ◽  
Ragnhild J.N. Hjerde ◽  
Olav Smidsrød

2006 ◽  
Vol 11-12 ◽  
pp. 243-246 ◽  
Author(s):  
Min Li Zhao ◽  
Gang Sui ◽  
Xu Liang Deng ◽  
Ji Gui Lu ◽  
Seung Kon Ryu ◽  
...  

Electrospinning has recently emerged as a potential technique for fabricating biomimetic tissue engineering scaffolds. In this study, Poly (l-lactic acid) (PLLA) /Nano-hydroxyapatite (HA) hybrid nanofibers scaffolds were prepared by electrospinning. The relationship between process parameters and fiber diameter has been investigated. The fiber diameter decreased with decreasing polymer concentration and with increasing electrospinning voltage; After 6 weeks of in vitro degradation, the mass, viscosity-average molecular weight of the nanofibers scaffolds and the pH value of the degradation solution were changed, the fibers lost their surface smoothness and a regular rough topology was generated after 32d of degradation, the degradation rates of PLLA/HA hybrid nanofibers were slower than those of pure PLLA fibers; The biocompatibility of the nanofibers scaffold has also been investigated by culturing cells on the nanofibers scaffold, elementary results showed that the cells adhered and proliferated well on the PLLA/HA hybrid nanofibers scaffolds.


Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7776
Author(s):  
Antje Schauer ◽  
Christian Redlich ◽  
Jakob Scheibler ◽  
Georg Poehle ◽  
Peggy Barthel ◽  
...  

The biocompatibility and degradation behavior of pure molybdenum (Mo) as a bioresorbable metallic material (BMM) for implant applications were investigated. In vitro degradation of a commercially available Mo wire (ø250 µm) was examined after immersion in modified Kokubo’s SBF for 28 days at 37 °C and pH 7.4. For assessment of in vivo degradation, the Mo wire was implanted into the abdominal aorta of female Wistar rats for 3, 6 and 12 months. Microstructure and corrosion behavior were analyzed by means of SEM/EDX analysis. After explantation, Mo levels in serum, urine, aortic vessel wall and organs were investigated via ICP-OES analysis. Furthermore, histological analyses of the liver, kidneys, spleen, brain and lungs were performed, as well as blood count and differentiation by FACS analysis. Levels of the C-reactive protein were measured in blood plasma of all the animals. In vitro and in vivo degradation behavior was very similar, with formation of uniform, non-passivating and dissolving product layers without occurrence of a localized corrosion attack. The in vitro degradation rate was 101.6 µg/(cm2·d) which corresponds to 33.6 µm/y after 28 days. The in vivo degradation rates of 12, 33 and 36 µg/(cm2·d) were observed after 3, 6 and 12 months for the samples properly implanted in the aortic vessel wall. This corresponds with a degradation rate of 13.5 µm/y for the 12-month cohort. However, the magnitude of degradation strongly depended on the implant site, with the wires incorporated into the vessel wall showing the most severe degradation. Degradation of the implanted Mo wire neither induced an increase in serum or urine Mo levels nor were elevated Mo levels found in the liver and kidneys compared with the respective controls. Only in the direct vicinity of the implant in the aortic vessel wall, a significant amount of Mo was found, which, however, was far below the amounts to be expected from degrading wires. No abnormalities were detected for all timepoints in histological and blood analyses compared to the control group. The C-reactive protein levels were similar between all the groups, indicating no inflammation processes. These findings suggest that dissolved Mo from a degrading implant is physiologically transported and excreted. Furthermore, radiographic and µCT analyses revealed excellent radiopacity of Mo in tissues. These findings and the unique combination with its extraordinary mechanical properties make Mo an interesting alternative for established BMMs.


Sign in / Sign up

Export Citation Format

Share Document