scholarly journals The Effect of in situ Ultraviolet Irradiation on the Chemical Vapor Deposited ZnO Thin Films

2016 ◽  
Vol 29 (4) ◽  
pp. 241-246
Author(s):  
Bo-Seok Kim ◽  
Seung Jae Baik
Keyword(s):  
Thin Films ◽  
Ultraviolet Irradiation ◽  
Chemical Vapor ◽  
Zno Thin Films ◽  
Chemical Vapor Deposited

Studies of the Coefficient of Thermal Expansion of Low-k ILD Materials by X-Ray Reflectivity

2006 ◽  
Vol 914 ◽  
Author(s):  
George Andrew Antonelli ◽  
Tran M. Phung ◽  
Clay D. Mortensen ◽  
David Johnson ◽  
Michael D. Goodner ◽  
...  
Keyword(s):  
Thin Films ◽  
Thermal Expansion ◽  
Coefficient Of Thermal Expansion ◽  
Chemical Vapor ◽  
Dielectric Materials ◽  
Free Standing ◽  
Dielectric Thin Films ◽  
X Ray ◽  
Chemical Vapor Deposited ◽  
Low K

AbstractThe electrical and mechanical properties of low-k dielectric materials have received a great deal of attention in recent years; however, measurements of thermal properties such as the coefficient of thermal expansion remain minimal. This absence of data is due in part to the limited number of experimental techniques capable of measuring this parameter. Even when data does exist, it has generally not been collected on samples of a thickness relevant to current and future integrated processes. We present a procedure for using x-ray reflectivity to measure the coefficient of thermal expansion of sub-micron dielectric thin films. In particular, we elucidate the thin film mechanics required to extract this parameter for a supported film as opposed to a free-standing film. Results of measurements for a series of plasma-enhanced chemical vapor deposited and spin-on low-k dielectric thin films will be provided and compared.

Rigidity Percolation in Plasma Enhanced Chemical Vapor Deposited a-SiC:H Thin Films

2019 ◽  
Vol 33 (8) ◽  
pp. 185-194 ◽  
Author(s):  
Sean King ◽  
Jeff Bielefeld
Keyword(s):  
Thin Films ◽  
Chemical Vapor ◽  
Chemical Vapor Deposited ◽  
Rigidity Percolation

Growth, Structural and Mechanical Characterization and Reliability of Chemical Vapor Deposited Co and Co3O4 Thin Films as Candidate Materials for Sensing Applications

2011 ◽  
Vol 495 ◽  
pp. 108-111 ◽  
Author(s):  
Vasiliki P. Tsikourkitoudi ◽  
Elias P. Koumoulos ◽  
Nikolaos Papadopoulos ◽  
Costas A. Charitidis
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Elastic Modulus ◽  
Data Storage ◽  
Mechanical Stability ◽  
Chemical Vapor ◽  
Magnetic Sensors ◽  
Functional Coatings ◽  
Sensing Applications ◽  
Chemical Vapor Deposited

The adhesion and mechanical stability of thin film coatings on substrates is increasingly becoming a key issue in device reliability as magnetic and storage technology driven products demand smaller, thinner and more complex functional coatings. In the present study, chemical vapor deposited Co and Co3O4thin films on SiO2and Si substrates are produced, respectively. Chemical vapor deposition is the most widely used deposition technique which produces thin films well adherent to the substrate. Co and Co3O4thin films can be used in innovative applications such as magnetic sensors, data storage devices and protective layers. The produced thin films are characterized using nanoindentation technique and their nanomechanical properties (hardness and elastic modulus) are obtained. Finally, an evaluation of the reliability of each thin film (wear analysis) is performed using the hardness to elastic modulus ratio in correlation to the ratio of irreversible work to total work for a complete loading-unloading procedure.

Ultra-high vacuum chemical vapor deposition and in situ characterization of titanium oxide thin films

1991 ◽  
Vol 6 (9) ◽  
pp. 1913-1918 ◽  
Author(s):  
Jiong-Ping Lu ◽  
Rishi Raj
Keyword(s):  
Thin Films ◽  
Chemical Vapor Deposition ◽  
Titanium Oxide ◽  
Vapor Deposition ◽  
Photoelectron Spectroscopy ◽  
High Vacuum ◽  
Chemical Vapor ◽  
Titanium Isopropoxide ◽  
Ultra High Vacuum

Chemical vapor deposition (CVD) of titanium oxide films has been performed for the first time under ultra-high vacuum (UHV) conditions. The films were deposited through the pyrolysis reaction of titanium isopropoxide, Ti(OPri)4, and in situ characterized by x-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES). A small amount of C incorporation was observed during the initial stages of deposition, through the interaction of precursor molecules with the bare Si substrate. Subsequent deposition produces pure and stoichiometric TiO2 films. Si–O bond formation was detected in the film-substrate interface. Deposition rate was found to increase with the substrate temperature. Ultra-high vacuum chemical vapor deposition (UHV-CVD) is especially useful to study the initial stages of the CVD processes, to prepare ultra-thin films, and to investigate the composition of deposited films without the interference from ambient impurities.

Organometallic chemical vapor deposited (OMCVD) thin films of YBa2Cu3O7−x (YBCO) on MgO and on YSZ buffer layers deposited on sapphire

1991 ◽  
Vol 185-189 ◽  
pp. 2093-2094 ◽  
Author(s):  
S. Chocron ◽  
T. Tsach ◽  
M. Parizh ◽  
M. Schieber ◽  
G. Deutscher ◽  
...  
Keyword(s):  
Thin Films ◽  
Chemical Vapor ◽  
Buffer Layers ◽  
Chemical Vapor Deposited
Sign in / Sign up

Export Citation Format

Share Document