scholarly journals Inhibition of Pipeline Steel Corrosion in 0.5 M H2SO4 Using Cotyledon of Chrysophyllum Albidum

2020 ◽  
Vol 24 (4) ◽  
pp. 691-697
Author(s):  
E.P. Othaki ◽  
N.C. Ngobiri
Keyword(s):  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Adsorption Process ◽  
Pipeline Steel ◽  
Steel Corrosion ◽  
Langmuir Adsorption ◽  
Extract Concentration ◽  
Ir Studies ◽  
Ft Ir ◽  
As Adsorption

The corrosion inhibition characteristics of Chrysophyllum albidum cotyledon extract was studied as a green and sustainable corrosion inhibitors for pipeline steel in acidic environment attemperatures, 303,313 and 323K using gravimetric technique.The results obtained showed that the inhibition efficiency increased with increase in extract concentration but decrease with increase in temperature. The extract attained an inhibition efficiency of 94 % with 5 g/L at 303 K and 52.2 % with 1 g/L at 333K. Also increase in concentration of the extract lead to increase in activation energydepicting an exothermic process.Fourier transform infrared spectroscopy (FT-IR) studies showed the mode of inhibition as adsorption of phytochemicals from the extract on pipeline steel surface. Langmuir adsorption isotherm best fitted into the adsorption process which is spontaneous and physical. Keywords: Chrysophyllum albidum, Pipeline steel, Inhibition, Adsorption.

scholarly journals Newly Synthesized N-Substituted Thiosemicarbazone as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl

2019 ◽  
Vol 7 (4.14) ◽  
pp. 168
Author(s):  
N Z. Nor Hashim ◽  
K Kassim ◽  
F H. Zaidon
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibitor ◽  
Potentiodynamic Polarization ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Electrochemical Impedance ◽  
Langmuir Adsorption ◽  
Before And After ◽  
Ft Ir ◽  
L1 And L2

Two N-substituted thiosemicarbazone derivatives namely as 2-(4-chlorobenzylidene)-N-phenylhydrazinecarbothioamide and 2-benzylidene-N-phenylhydrazinecarbothioamide (L1 and L2, respectively) have been tested as corrosion inhibitors on mild steel in 1 M HCl. The ligands were synthesized and investigated using potentiodynamic polarization (PD) and electrochemical impedance spectroscopy (EIS).  The obtained results indicated that inhibition efficiency, (IE, %) L1 increased with increasing inhibitor concentrations which behaved as a good corrosion inhibitor compared to L2. The synthesized ligands were successfully characterized by melting point, elemental analysis (C, H, N, and S), Fourier-transform infrared spectroscopy (FT-IR) and NMR (1H and 13C) spectroscopy. The excellent inhibition effectiveness for both compounds on mild steel before and after immersion in 1 M HCl solution containing 40 ppm of L1 and L2 were also verified by scanning electron microscope (SEM). Based on potentiodynamic polarization results, it can be concluded that all investigated compounds are mixed-type inhibitors and obey the Langmuir adsorption isotherm. 

scholarly journals Some Polysorbate Compounds as Corrosion Inhibitors for Carbon Steel in Hydrochloric Acid

2009 ◽  
Vol 5 (3) ◽  
pp. 830-838 ◽  
Author(s):  
Mohamed Sobhi ◽  
M. Abdallah ◽  
E. Hfaez
Keyword(s):  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Adsorption Process ◽  
Electrochemical Impedance ◽  
Acid Corrosion ◽  
Hydrocarbon Chain ◽  
Langmuir Adsorption ◽  
Adsorption Free Energy ◽  
Hydrocarbon Chain Length ◽  
Polarization Studies

Some commercial non-ionic surfactants polysorbate, namely, polysorbate 80, polysorbate 40 and polysorbate 20, were tested as inhibitors for corrosion of C-steel in 2.0M HCl solution using weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy techniques. It was found that all the three used compounds act as inhibitors for acid corrosion of C-steel. The inhibition efficiencies obtained by the three techniques were almost the same, and increase with increasing the hydrocarbon chain length and the surfactant concentration. The polarization studies show that these compounds act as mixed inhibitors. The inhibition action of these surfactants can be explained by their ability to adsorb on the metal surface making a barrier to mass and charge transfer.  It was found that the adsorption of these surfactants follows Langmuir adsorption isotherm. The negative values of  adsorption free energy indicating that the adsorption process is spontaneous and increases, for different surfactants, in the same direction as inhibition efficiency.

scholarly journals Fatty Amidine as Copper Corrosion Inhibitor

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Zainal Alim Mas’ud ◽  
Noviyan Darmawan ◽  
Januari Dawolo ◽  
Yusuf Bramastya Apriliyanto
Keyword(s):  
Corrosion Inhibitor ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Adsorption Process ◽  
Copper Surface ◽  
Langmuir Adsorption Isotherm ◽  
Copper Corrosion ◽  
Langmuir Adsorption ◽  
New Type ◽  
Corrosion Inhibition Efficiency

The development of green and sustainable corrosion inhibitors for copper in a corrosive marine environment is highly desired. Herein, we studied the fatty acid-based amidine as the new type of renewable corrosion inhibitor. Stearamidine salt was used as a model inhibitor, and it was synthesized through stearonitrile intermediate with an excellent isolated yield of 88%. We used electrochemical (potentiodynamic polarization) and morphological (scanning electron microscopy) measurements to assess the corrosion inhibition efficiency of stearamidine in 3.0 wt.% NaCl at 300 K. We show that, in such a condition, the optimum inhibition efficiency of 96% was achieved using only 0.2 mM stearamidine. The results suggested the fatty amidine is a promising corrosion inhibitor for copper that is suitable in the saltwater ecosystem. The thermodynamic parameters of the interaction between the stearamidine and the copper surface were determined, and the result suggests that the adsorption process occurred accordingly with the Langmuir adsorption isotherm and involved both physisorption and chemisorption.

Inhibition of pipeline steel corrosion in acidic environment using sulphadoxine and pyrimethamine

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Inhibition Efficiency ◽  
Pipeline Steel ◽  
Electrochemical Techniques ◽  
Steel Corrosion ◽  
Acidic Environment ◽  
Inhibitor Concentration ◽  
Adsorption Data ◽  
Corrosion Inhibition Efficiency ◽  
Inhibitive Action ◽  
Sulphadoxine Pyrimethamine

The anti-corrosive properties of sulphadoxine + pyrimethamine (S+P) on the corrosion of pipeline steel in acidic environment were investigated using electrochemical techniques. The results obtained showed an excellent inhibition efficiency which increased with increase in inhibitor concentration. The corrosion inhibition efficiency increased up to 99.04 % at 0.01M S+P and decreased with rise in temperature down to 85.93 % at 333 K and 0.01 M S+P, suggesting a physiosorptive mechanism of adsorption. Also the adsorption data was fitted into Langmuir and Temkin adsorption isotherms, while the inhibitive action was shown to proceed by mixed inhibition mode.

Modification of Ligustrum vulgare Leaves Extract as Eco-Friendly Corrosion Inhibitors in Oil Fields

2019 ◽  
Vol 814 ◽  
pp. 499-504
Author(s):  
Ren Jun Xu ◽  
Hua Lei He ◽  
Ying Li Tang ◽  
Min Lan Gao ◽  
Hai Peng Hui ◽  
...  
Keyword(s):  
Corrosion Inhibition ◽  
Corrosion Inhibitors ◽  
Adsorption Mechanism ◽  
Inhibition Efficiency ◽  
Oil Fields ◽  
Inhibition Effect ◽  
Langmuir Adsorption ◽  
Ligustrum Vulgare ◽  
Main Components ◽  
Dark Green

Ligustrum vulgare is an evergreen tree. The leaves are opposite, glossy dark green, 6–17 centimetres (2.4–6.7 in) long and 3–8 centimetres (1.2–3.1 in) broad. The ligustrum vulgare leaves contain two main components, one of which is oleanolic acid and the other is p-hydroxyphenylethanol which indicates its extracts suitable to be used as an effective corrosion inhibitor. Extracts of ligustrum vulgare leaves (PE) were modified with hydroxymethylation reaction (PM1) and Mannich reaction (PM2) to produce the relative stable green acidic corrosion inhibitors. The extracts of ligustrum vulgare leaves have been investigated on the corrosion inhibition of A3 steel with weight loss. The results show that these inhibitors have good corrosion inhibition effect on A3 steel. The PM2 are the most effective for corrosion inhibition, and the inhibition efficiency can reach 75.95%. When the temperature is 60°C, the corrosion inhibition rate of PE, PM1, PM2 is only 24.46%, 42.35% and 39.35% respectively which can not effectively prevent the corrosion of the metal. And the extracts inhibit corrosion mainly by adsorption mechanism. This adsorption accords with Langmuir adsorption isotherm.

Effect of Andrographis paniculata (Burm.f.) Wall.ex Nees extract on corrosion of low C-steel in 0.1 M HCl

2016 ◽  
Vol 63 (6) ◽  
pp. 470-476 ◽  
Author(s):  
Pawin Wongkhamprai ◽  
Manthana Jariyaboon
Keyword(s):  
Inhibition Efficiency ◽  
Adsorption Process ◽  
Electrochemical Impedance ◽  
Andrographis Paniculata ◽  
Low Carbon ◽  
Content Type ◽  
Langmuir Adsorption ◽  
Green Corrosion Inhibitor ◽  
Corrosion Inhibition Efficiency ◽  
Environmentally Friendly Method

Purpose The aim of this work was to investigate how Andrographis paniculata (Burm.f.) Wall.ex Nees extract affected the corrosion of low-carbon (C) steel in 0.1M HCl. Design/methodology/approach The Andrographis paniculata (Burm.f.) Wall.ex Nees was extracted into distilled water at 70°C for 1 h. The corrosion inhibition efficiency of the extract was determined in 0.1M HCl using weight loss measurements, potentiodynamic polarization and electrochemical impedance spectroscopy. The effects of extract concentrations and of temperature were investigated. Findings The Andrographis paniculata (Burm.f.) Wall.ex Nees extract could inhibit the corrosion process of low-C steel in 0.1M HCl. With the extract concentration of 1 g/l, an inhibition efficiency of 96.3 per cent was obtained. The extract acted as an anodic inhibitor. The adsorption process of the extract was physisorption and it followed the Langmuir adsorption isotherm. Originality/value This paper revealed that Andrographis paniculata (Burm.f.) Wall.ex Nees cultivated in Thailand, which was extracted using a simple and environmentally friendly method, could act as a very good green corrosion inhibitor for low-C steel in 0.1M HCl solution.

scholarly journals Surface Protection of Steel by Adsorption of Milletia Pinnata Extract

2016 ◽  
Vol 13 (2) ◽  
pp. 101-105
Author(s):  
Monikandon Sukumaran ◽  
Kesavan Devarayan
Keyword(s):  
Weight Loss ◽  
Steel Surface ◽  
Inhibition Efficiency ◽  
Physical Adsorption ◽  
Ethanolic Extract ◽  
Steel Corrosion ◽  
Langmuir Adsorption Isotherm ◽  
Surface Protection ◽  
Langmuir Adsorption ◽  
Thermochemical Parameters

Steel corrosion inhibition in acidic and alkaline medium by ethanolic extract of Milletia pinnata is described in this study. The inhibitive behavior of the inhibitor is evaluated by weight loss measurements, adsorption isotherms, and thermochemical parameters. The inhibitor exhibited a maximum of 87% and 90.5% inhibition efficiency against steel corrosion in 0.5 M NaOH and 1.0 M H2SO4, respectively. The weight loss linearly fit to Langmuir adsorption isotherm with correlation coefficient value close to unity. The thermochemical parameters indicated for predominant physical adsorption of the inhibitor molecules on the steel surface.

scholarly journals A thermometric study on the kinetics of the acid dissolution of aluminium in the presence of Napoleonaea imperialis seeds extract and iodide ions

2018 ◽  
Vol 29 (2) ◽  
pp. 103-109 ◽  
Author(s):  
Habibat Faith Chahul ◽  
Gloria Ihuoma Ndukwe ◽  
David Ogwu Ogwu
Keyword(s):  
Free Energy ◽  
Inhibition Efficiency ◽  
Adsorption Process ◽  
Langmuir Adsorption Isotherm ◽  
Seed Extract ◽  
Considerable Extent ◽  
Acid Dissolution ◽  
Iodide Ions ◽  
Langmuir Adsorption ◽  
Kinetics Of

Abstract The dissolution of aluminum alloy AA 1060 in 0.5 M and 1.0 M HCl was investigated using thermometric measurements. The reaction number of the aluminum coupons varied linearly with the concentration of the acid. Addition of Napoleonaea imperialis seed extract to the dissolving aluminium coupons lowered the reaction number in both concentrations of HCl by inhibiting the dissolution process. The inhibition efficiency of Napoleonaea imperialis seed extract was enhanced to a considerable extent in the presence of iodide ions with the synergistic parameter S > 1. The adsorption of Napoleonaea imperialis extract on the aluminium surface best aligned with the Langmuir adsorption isotherm model. The values of the free energy, ΔGadsfor the adsorption process revealed the process to be spontaneous and physisorptive.

scholarly journals Mechanism and inhibition efficiency of biomass Tetraselmis chuii sp. on carbon steel corrosion in the environment under the conditions of oil wells

Al-Kimia ◽  
2020 ◽  
Vol 8 (1) ◽  
Author(s):  
Yayan - Sunarya ◽  
Heli Siti H ◽  
Munawaroh Munawaroh ◽  
Gun Gun Gumilar
Keyword(s):  
Carbon Steel ◽  
Corrosion Inhibitors ◽  
Inhibition Efficiency ◽  
Protective Layer ◽  
Steel Corrosion ◽  
Marine Microorganisms ◽  
Tetraselmis Chuii ◽  
Mechanism Of Inhibition ◽  
Biomass Extract ◽  
Inhibition Ability

Corrosion control on petroleum pipe wells can only be done through the addition of corrosion inhibitors. In this study, the corrosion inhibitors studied were sourced from marine microorganisms, namely the type of microalgae Tetraselmis chuii sp. The aim to be achieved in this study was to determine the mechanism and efficiency of inhibition of the extraction of microalgae biomass in corrosion of carbon steel in an environment of petroleum conditions. To achieve this goal, a potentiodynamic polarization method (Tafel extrapolation) was used and the Electrochemistry Impedance Spectroscopy (EIS) method used the galvanostat-potentiostat device (Voltalab 40, PGZ 301). The results obtained from this study indicate that API 5L X65 carbon steel in the petroleum environment is very significantly corroded, caused by acidic media derived from acetic acid and dissolved CO2. The inhibition ability of the Tetraselmis chuii sp. Biomass extract. in line with the increasing extraction concentration reaching optimum at a concentration of 250 ppm with inhibition efficiency reaching 70%. The mechanism of inhibition takes place through the formation of a protective layer adsorbed on the surface of carbon steel. The protective membrane formed is uneven and tends to be porous.

scholarly journals Anti-corrosive effect of Cassia alata leaves extract on Mild steel in 1.0N Hydrochloric acid

2006 ◽  
Vol 2 (2) ◽  
pp. 82-90
Author(s):  
Petchiammal A.p ◽  
P.Deepa Rani ◽  
S.Seetha Laks ◽  
S. Selvaraj
Keyword(s):  
Mild Steel ◽  
Corrosion Inhibition ◽  
Inhibition Efficiency ◽  
Spectroscopic Studies ◽  
Protective Film ◽  
Cassia Alata ◽  
Langmuir Adsorption ◽  
Corrosive Effect ◽  
Ft Ir ◽  
Corrosion Inhibition Efficiency

The inhibition effect of Cassia alata leaves extract on corrosion of mild steel in 1N HCl was investigated through mass loss measurements with various time and temperature. The observed result indicated that the corrosion inhibition efficiency and degree of surface coverage were increased with increase of inhibitor concentration and temperature. The thermodynamic parameters (Ea, ∆Hads, ∆Gads, ∆Sads) were evaluated for corrosion inhibition process which suggests that the adsorption is endothermic, spontaneous and chemisorptions and also the inhibitor follows Langmuir adsorption isotherm. The protective film formed on metal surface was analyzed using spectroscopic studies viz, UV, FT-IR and EDX techniques.

Sign in / Sign up

Export Citation Format

Share Document