scholarly journals Selected physical and mechanical properties of Scots pine (Pinus sylvestris L.) wood from stands of younger age classes as criteria for rational utilization of timber

2021 ◽  
Vol 27 (1) ◽  
Author(s):  
Przemysław Marcin Pikiński ◽  
Jaroslav Szaban ◽  
Gerda Šilingienė ◽  
Robert Korzeniewicz ◽  
Witold Pazdrowski
Keyword(s):  
Mechanical Properties ◽  
Pinus Sylvestris ◽  
Scots Pine ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Growth Conditions ◽  
Tree Age ◽  
Coniferous Forests ◽  
Forest Site ◽  
Quality Coefficient

The aim of this study was to assess the quality of Scots pine (Pinus sylvestris L.) wood depending on the age of trees, forest site conditions and social class of tree position in the stand. Analyses were based on the determination of specific density and static bending strength, as well as the strength quality coefficient. It was to determine changes in physical and mechanical properties of timber depending on tree age as well as growth conditions reflected in the forest site such as fresh mixed coniferous forests and fresh mixed broadleaved forests. Experimental plots were established in 6 localities with 30, 40 and 60-year-old trees. In each of the stands, a 1-hectare experimental plot was established. Based on the measured DBH and tree height, dimensions of three mean sample trees were calculated, while the classification of social class of tree position in the stand developed by Kraft (1884) was also applied. Analyses were conducted on wood samples with 12% moisture content. Strength tests on wood samples were performed on an Instron 33RH204 universal strength testing machine. A detailed analysis showed properties of pine wood are improved with an increase of tree age in both forest sites. Statistically significant differences were observed for wood density and static bending strength. More advantageous properties were observed for wood of pines from the less fertile forest site, i.e., fresh mixed coniferous forests. Density and static bending strength were markedly determined by tree age and growth conditions. The static bending strength quality coefficient from pines growing in the fresh mixed coniferous forests increased between 30 and 40 years, similarly as it was for the fresh mixed broadleaved forests, while between 40 and 60 years, it deteriorated for the fresh mixed coniferous forests. Wood density from the fresh mixed coniferous forests was by 3% to 7% greater than pines growing in fresh mixed broadleaved forests. In turn, static bending strength of wood from pines growing in fresh mixed coniferous forests was by 4% to 10% greater than trees from the fresh mixed broadleaved forests.  Keywords: Scots pine, wood properties, forest site, Poland

scholarly journals Influence of Scots Pine (Pinus sylvestris L.) Veneers Quality on Selected Properties of Layered Composite for Flooring Materials

Forests ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 1017
Author(s):  
Izabela Burawska-Kupniewska ◽  
Paweł Mycka ◽  
Piotr Beer
Keyword(s):  
Mechanical Properties ◽  
Pinus Sylvestris ◽  
Scots Pine ◽  
Modulus Of Elasticity ◽  
Bending Strength ◽  
Deformation Modulus ◽  
Physical And Mechanical Properties ◽  
Production Costs ◽  
Base Layer ◽  
Class A

The article concerns the quality issues in wood industry, and especially the advisability of removing defects from veneers. The research purpose of the study was to analyse the influence of the layered structure of plywood base layer made of low-quality wood on selected mechanical properties of floor composites. The utilitarian purpose is to analyse the possibility of producing floors from low-quality materials reducing waste. Four quality classes of Scots pine veneers (Pinus sylvestris L.) were taken into account: A, B, C, D, from the highest class-A without defects to the lowest class-D characterized by a lot of knots (including broken and falling out ones) and cracks. The base layer of the floors was made of these wood quality classes. The value of the modulus of elasticity in elastic deformation, modulus of elasticity in the dynamic and fatigue tests, stiffness and static bending strength were investigated. The test results showed that, as expected, the samples made of class A had the highest values of the measured parameters (static bending strength, static and dynamic modulus of elasticity, and stiffness). However, the values of the tested parameters for the remaining classes B, C, and D did not significantly differ. It was concluded from the research that the change of the plywood base layer conditions regarding the quality of veneers does not significantly affect the physical and mechanical properties of composites. Hence, it is possible to use wood of lower quality classes for production without verification of which class they belong to, which will significantly reduce the production costs.

scholarly journals Comparative Assessment Of Some Physical And Mechanical Properties Of Wood Of Different Scots Pine Climatypes

2021 ◽  
Vol 24 (2) ◽  
pp. 27-36
Author(s):  
Siarhei Rabko ◽  
Aliaksandr Kozel ◽  
Ivan Kimeichuk ◽  
Vasyl Yukhnovskyi
Keyword(s):  
Mechanical Properties ◽  
Scots Pine ◽  
Bending Strength ◽  
Geographical Origin ◽  
Testing Machine ◽  
Physical And Mechanical Properties ◽  
Forest Steppe ◽  
Siberian Pine ◽  
North Latitude

For a more efficient and rational use in the production of Scots pine wood of various geographical origin, it is necessary to know its physical and mechanical properties. The purpose of this study was to determine the physical and mechanical properties of wood of 17 climatic ecotypes of Scots pine and to carry out a comparative analysis of the indicators obtained for the studied climatypes separately and when they are grouped into subspecies in accordance with the classification of L.F. Pravdin. The range of the geographical origin of the places of seed procurement is from 47 to 62° north latitude and from 22 to 85° east longitude. The modern density universal testing machine MTS INSIGHT 100 was used for research. As a result of the research, it was found that the density of wood in an absolutely dry state varies from 370 kg/m3 (Kursk climatype) to 524 kg/m3 (Volgograd climatype), and at 12% humidity – from 397 kg/m3 (Kursk climatype) to 550 kg/m3 (Volgograd climatype). The index of the strength of wood of the studied climatypes for compression along the fibres was from 32 MPa (Kursk climatype) to 54 MPa (Volgograd climatype), and for static bending – from 55 to 92 MPa for the Vologda and Ulyanovsk climatypes, respectively. Distribution of Scots pine climatypes into subspecies in accordance with the classification of L.F. Pravdin and the obtained data on the physical and mechanical properties of wood have a certain pattern. The maximum density of wood at 12% moisture is typical for the European Scots pine subspecies is 497±8 kg/m3 , the minimum value of this indicator for the Siberian Scots pine subspecies is 423±30 kg/m3 . An intermediate position is occupied by the subspecies of Lapland pine and Forest-steppe pine with values of 483±16 and 464±12 kg/m3 , respectively. The strength index of wood in the studied subspecies for compression along the fibres ranged from 47±1 MPa (European subspecies) to 33±4 MPa (Siberian subspecies), in the Lapland pine subspecies – 44±2 MPa and somewhat lower in the Forest-steppe pine subspecies – 42±2 MPa. The maximum value of the static bending strength of wood is typical for the European pine subspecies – 78±4 MPa, and the minimum – for the Siberian pine subspecies – 61±14 MPa. This indicator turned out to be equal in subspecies of forest-steppe and Lapland pine and amounted to 72±4 MPa. The practical value of the work lies in identifying the existing differences and variability among climatypes according to the studied physical and mechanical properties of wood and selecting the most promising of them for further breeding purposes

scholarly journals Vertical variability of selected macrostructural properties of juvenile wood organization in trunks of Scots pine (Pinus sylvestris L.) trees

2011 ◽  
Vol 76 (1) ◽  
pp. 27-33
Author(s):  
Arkadiusz Tomczak ◽  
Witold Pozdrowski ◽  
Tomasz Jelonek ◽  
Ireneusz Stypuła
Keyword(s):  
Mechanical Properties ◽  
Pinus Sylvestris ◽  
Scots Pine ◽  
Annual Ring ◽  
Juvenile Wood ◽  
Physical And Mechanical Properties ◽  
Wood Structure ◽  
Annual Rings ◽  
Tree Trunk ◽  
Wood Tissue

The study makes an attempt to analyse the width of annual rings, the width of the latewood zone and the proportion of the latewood within juvenile wood along trunks of Scots pine (<em>Pinus sylvestris</em> L.) trees and to verify the hypothesis about the heterogeneous properties of juvenile wood in a single trunk. It was found that the above-mentioned macrostructural elements of wood structure showed a curvilinear correlation with the height of measurement points along the tree trunk. As the distance from the base of trunk increased, the width of the annual ring and the width of the latewood zone decreased, while the proportion of the latewood increased. These types of changes can affect positively physical and mechanical properties of wood tissue. It can be assumed that there is a mechanism which modifies properties of juvenile wood causing axial diversification of the analysed type of wood tissue. It is probable that axial heterogeneity results in advantageous changes in the mechanics of the tree trunk.

Structure and properties of compact articles from high-alloyed iron powder with adding of boron nitride

2020 ◽  
pp. 39-48
Author(s):  
B. O. Bolshakov ◽  
◽  
R. F. Galiakbarov ◽  
A. M. Smyslov ◽  
◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Boron Nitride ◽  
Grain Boundary ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Operating Conditions ◽  
Structure And Properties ◽  
Steam Turbines ◽  
Friction Forces ◽  
Wide Range

The results of the research of structure and properties of a composite compact from 13 Cr – 2 Мо and BN powders depending on the concentration of boron nitride are provided. It is shown that adding boron nitride in an amount of more than 2% by weight of the charge mixture leads to the formation of extended grain boundary porosity and finely dispersed BN layers in the structure, which provides a high level of wearing properties of the material. The effect of boron nitride concentration on physical and mechanical properties is determined. It was found that the introduction of a small amount of BN (up to 2 % by weight) into the compacts leads to an increase in plasticity, bending strength, and toughness by reducing the friction forces between the metal powder particles during pressing and a more complete grain boundary diffusion process during sintering. The formation of a regulated structure-phase composition of powder compacts of 13 Cr – 2 Mо – BN when the content of boron nitride changes in them allows us to provide the specified physical and mechanical properties in a wide range. The obtained results of studies of the physical and mechanical characteristics of the developed material allow us to reasonably choose the necessary composition of the powder compact for sealing structures of the flow part of steam turbines, depending on their operating conditions.

scholarly journals Eco-Friendly, High-Density Fiberboards Bonded with Urea-Formaldehyde and Ammonium Lignosulfonate

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 220
Author(s):  
Petar Antov ◽  
Viktor Savov ◽  
Ľuboš Krišťák ◽  
Roman Réh ◽  
George I. Mantanis
Keyword(s):  
Mechanical Properties ◽  
Bending Strength ◽  
Urea Formaldehyde ◽  
Physical And Mechanical Properties ◽  
High Density ◽  
Thickness Swelling ◽  
Formaldehyde Content ◽  
Uf Resin ◽  
Natural Wood ◽  
European Standards

The potential of producing eco-friendly, formaldehyde-free, high-density fiberboard (HDF) panels from hardwood fibers bonded with urea-formaldehyde (UF) resin and a novel ammonium lignosulfonate (ALS) is investigated in this paper. HDF panels were fabricated in the laboratory by applying a very low UF gluing factor (3%) and ALS content varying from 6% to 10% (based on the dry fibers). The physical and mechanical properties of the fiberboards, such as water absorption (WA), thickness swelling (TS), modulus of elasticity (MOE), bending strength (MOR), internal bond strength (IB), as well as formaldehyde content, were determined in accordance with the corresponding European standards. Overall, the HDF panels exhibited very satisfactory physical and mechanical properties, fully complying with the standard requirements of HDF for use in load-bearing applications in humid conditions. Markedly, the formaldehyde content of the laboratory fabricated panels was extremely low, ranging between 0.7–1.0 mg/100 g, which is, in fact, equivalent to the formaldehyde release of natural wood.

Mechanical properties and freeze-thaw resistances of bronze-concrete composites

2021 ◽  
Vol 12 (2) ◽  
pp. 39
Author(s):  
Tuba Bahtli ◽  
Nesibe Sevde Ozbay
Keyword(s):  
Mechanical Properties ◽  
Bending Strength ◽  
Physical And Mechanical Properties ◽  
Ultrasonic Pulse Velocity ◽  
Ultrasonic Pulse ◽  
Test Methods ◽  
Pulse Velocity ◽  
Plastic Energy ◽  
Freeze Thaw ◽  
Schmidt Rebound Hammer

Studies in the literature show that the physical and mechanical properties of concrete could be improved by the incorporation of different kinds of industrial waste, including waste tire rubber and tire steel. Recycling of waste is important for economic gain and to curb environmental problems. In this study, finely ground CuAl10Ni bronze is used to improve the physical and mechanical properties, and freeze-thaw resistances of C30 concrete. The density, cold crushing strength, 3-point bending strength, elastic modulus, toughness, and freeze-thaw resistances of concrete are determined. In addition, the Schmidt Rebound Hammer (SRH) and the ultrasonic pulse velocity (UPV) tests, which are non-destructive test methods, are applied. SEM/EDX analyses are also carried out. It is noted that a more compacted structure of concrete is achieved with the addition of bronze sawdust. Then higher density and strength values are obtained for concretes that are produced by bronze addition. In addition, concretes including bronze sawdust generally show higher toughness due to high plastic energy capacities than pure concrete.

Effect of thermomechanical densification of pine wood (Pinus sylvestris L.) on cutting forces and roughness during milling

2021 ◽  
Vol 113 ◽  
pp. 36-42
Author(s):  
Barbara Białowąs ◽  
Karol Szymanowski
Keyword(s):  
Mechanical Properties ◽  
Surface Roughness ◽  
Statistical Analysis ◽  
Pinus Sylvestris ◽  
Cutting Forces ◽  
Physical And Mechanical Properties ◽  
Milling Process ◽  
Pine Wood ◽  
Roughness Index ◽  
Modified Wood

Effect of thermomechanical densification of pine wood (Pinus sylvestris L.) on cutting forces and roughness during milling. The paper presents the results of research concerning the assessment of machinability of pine wood thermomechanically compacted. The assessment was made on the basis of the cutting forces and surface roughness after the milling process. Selected properties of native and modified wood were examined. Based on the research, it was found that compacted wood is characterized by higher cutting forces during milling. The surface quality after milling was examined and the roughness index Ra values were determined. The research shows that the modified wood is characterized by a lower Ra value both along and across the grain. Statistical analysis showed that the modification had a statistically significant effect on the values of cutting forces and the physical and mechanical properties of the tested wood.

Sign in / Sign up

Export Citation Format

Share Document