scholarly journals RELATIONSHIP BETWEEN COMPRESSIVE STRENGTH AND MODULUS OF ELASTICITY OF SELF CONSOLIDATING HIGH PERFORMANCE CONCRETES (SCHPCS) INCORPORATING GSA AS SCM

2020 ◽  
Author(s):  
T.A Buari ◽  
Festus Olutoge ◽  
G. M. Ayininuola
Keyword(s):  
Compressive Strength ◽  
Modulus Of Elasticity ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Strong Relationship ◽  
High Volume ◽  
Design Strength ◽  
Linear Relationships ◽  
Groundnut Shell

This experimental work evaluates the relationship between compressive strength and modulus of Elasticity of self-consolidating High performance concrete (SCHPC) containing high volume of Groundnut Shell Ash (GSA) up to 40% substitution as SCM. A total of 210 specimens of the GSA blended SCHPCs comprising 105 cubes (100 x100 mm) and 105 cylinders (150x300 mm) were cured in water for 7,14,28 ,56, 92,120 and 180 days hydration periods and the compressive strength and Modulus of elasticity determined. The linear relationships were studied with regression analysis. The findings revealed that all the mixes met the Modulus of Elasticity values requirement of 18,000N/mm2 to 42,000N/mm2 and the compressive results show that three substitution levels of 0%, 10% and 20% attained the proposed design strength (40-130 Mpa) and also satisfied the requirement for self-consolidating and high strength concretes. In conclusion, 0%-20% GSA substitutions (SCHPCA0-SCHPCA20) indicated a strong linear relationship with regressions values obtained varies between 0.842 and 0.954 for the two variables. Addition of GSA as SCM has improved the mechanical properties of SCHPC and creates a strong relationship between the compressive strength and Modulus of Elasticity.

Study on the Compressive Strength and Mixing of Ultra-High Performance Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 825-828
Author(s):  
Su Li Feng ◽  
Peng Zhao
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Strength Properties ◽  
Test Method ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Ultra High Performance Concrete ◽  
Mixture Ratio

The test in order to obtain liquidity, higher intensity ultra-high performance concrete(UHPC), in the course of preparation, high intensity quartz sand to replace the ordinary sand,reasonable mixture ratio control low water-cement ratio,the incorporation of part of the test piece ofsteel fibers, produced eight specimens . In the ordinary molding and the standard conservation 28d thecase, the ultra-high-performance concrete compressive strength of more than 170MPa.Thepreparation of the test method and test results will provide the basis for further study of the law of themechanical properties of ultra high strength properties of concrete.

Experimental Study on Workability and Strength of Green High Performance Concrete with High Volume Fly Ash

2013 ◽  
Vol 859 ◽  
pp. 52-55 ◽  
Author(s):  
Yong Qiang Ma
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
High Volume ◽  
Ash Content ◽  
Splitting Tensile Strength ◽  
Binder Ratio ◽  
Water Binder Ratio

A great deal of experiments have been carried out in this study to reveal the effect of the water-binder ratio and fly ash content on the workability and strengths of GHPC (green high performance concrete). The workability of GHPC was evaluated by slump and slump flow. The strengths include compressive strength and splitting tensile strength. The results indicate that the increase of water-binder ratio can improve the workability of GHPC, however the strengths of GHPC were decreased with the increase of water-binder ratio. When the fly ash content is lower than 40%, the increase in fly ash content has positive effect on workability of GHPC, while the workability begins to decrease after the fly ash content is more than 40%. The addition of fly ash in GHPC has adverse effect on the strengths, and there is a tendency of decrease in the compressive strength and splitting tensile strength of GHPC with the increase of fly ash content.

Size Effect on Compressive Strength and Modulus of Elasticity in High Performance Concrete

2013 ◽  
Vol 634-638 ◽  
pp. 2742-2745 ◽  
Author(s):  
Jeong Eun Kim ◽  
Wan Shin Park ◽  
Nam Yong Eom ◽  
Do Gyeum Kim ◽  
Jea Myoung Noh
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Size Effect ◽  
Modulus Of Elasticity ◽  
High Performance ◽  
High Performance Concrete ◽  
Type A ◽  
Type B ◽  
Replacement Ratio ◽  
Curing Age

This study undertook the research of size effect on compressive strength and modulus of elasticity, respectively. The parameters of this study are curing age and fly ash replacement ratio to investigate size effect of Type A (100mm x 200mm) and Type B (150mm x 300mm) specimens in high performance concrete. On this study, high performance concrete was fabricated with different FA contents of 10%, 20% and 30%. The measurements were performed on days 28 and 91.

Investigating the Application of DOE Method in Designing a High-Strength and High-Performance Concrete

2014 ◽  
Vol 875-877 ◽  
pp. 776-780
Author(s):  
Mojtaba Valinejad Shoubi ◽  
Azin Shakiba Barough ◽  
Iman Kiani
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Design Method ◽  
High Strength ◽  
Mix Design ◽  
Design Calculation ◽  
Concrete Mix Design ◽  
Compressive Strength Test ◽  
Chloride Attack

Concrete is the main material used in most of structures in the world. The use of high strength and high performance concrete to overcome deterioration due to static and dynamic load and some environmental burden in different situation such as chloride attack, sulphate attack and etc, is increasing worldwide. Achieving to a concrete with a high quality and saving in amount of material used for producing the concrete need a proper mix design method taken into account. DOE method is considered as an effective and substantial method in implementing the concrete mix design. In this paper, specifications and all mix design calculation steps using DOE method in achieving a high strength and high performance concrete for a tall building in a coastal environment based on three concrete cubes specimens produced in the lab, are investigated. The 7 and 14 day compressive strength test were implemented on the concrete cubes. At the end, it concluded that the specified compressive strength (45 N/mm2) can be achieved on the 28th day based on DOE method.

scholarly journals Meta-Analysis of Fiber Impact on Mechanical Properties of Ultra-High Performance Concrete

2020 ◽  
Author(s):  
Faiq M. Al-Zwainy ◽  
Hussam k. Risan ◽  
Rana I. K. Zaki
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Meta Analysis ◽  
High Strength ◽  
Ultimate Compressive Strength ◽  
Ultra High Performance Concrete

The purpose of this study was to conduct a meta-analysis that shows the influence of fiber on ultimate compressive strength and tensile strength of ultra-high performance concrete. The internet scholarly search engines and ScienceDirect article references were used to illustrate the papers concerning the experimental investigations of mechanical properties of ultra-high strength concrete with and without fiber with clearly, completely and comparative raw data. The normal concrete test results were dismissed from this search. Seven trials were identified based on the adopted inclusion and exclusion criteria above. The meta-analysis based on standardized mean difference was carried out on the basis of a fixed-effects model for the major outcomes of the ultimate compressive and tensile properties of ultra-high performance concrete. A total of 888 test specimens were enrolled in these seven trials. The combined analysis yielded a sign of a significant improvement in ultimate compressive strength and tensile strength of ultra-high strength concrete with fiber addition of 2% by concrete volume. The summary effect size of ultimate compressive strength was 2.34 while a more improvement in term of tensile strength with effect size of 2.64. By addition fiber of 2% provides a significant benefit in mechanical properties of ultra-high performance concrete.

scholarly journals Development of quaternary blended high performance concrete made with high reactivity metakaolin

2018 ◽  
Vol 7 (2.1) ◽  
pp. 79 ◽  
Author(s):  
V Srinivasa Reddy ◽  
R Nirmala
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
High Performance ◽  
High Performance Concrete ◽  
Research Work ◽  
High Strength ◽  
Supplementary Cementitious Materials ◽  
Ternary Blend ◽  
Strength Development ◽  
Strength Grade

In the last three decades, supplementary cementitious materials such as fly ash, silica fume and ground granulated blast furnace slag have been judiciously utilized as cement replacement materials as these can significantly enhance the strength and durability characteristics of concrete in comparison with ordinary Portland cement (OPC) alone. Hence, high-performance concretes can be produced at lower water/powder ratios by incorporating these supplementary materials. One of the main objectives of the present research work was to investigate synergistic action of binary, ternary and quaternary blended high strength grade (M80) concretes on its compressive strength. For blended high strength grade (M80) concrete mixes the optimum combinations are: Binary blend (95%OPC +5% FA, 95%OPC +5% MS and 95%OPC +5%MK), ternary blend (65%OPC+20%FA+15%MS) and quaternary blend (50%OPC+28%FA+11%MS+11%MK). Use of metakaolin in fly ash based blended concretes enhances compressive strength significantly and  found to be cost effective in terms of less cement usage, increased usage of fly ash and also plays a major role in early strength development  of fly ash based blended concrete.  

Dosage of Silica Fume in High Performance Concrete

2016 ◽  
Vol 677 ◽  
pp. 98-102 ◽  
Author(s):  
Michal Ženíšek ◽  
Tomáš Vlach ◽  
Lenka Laiblová
Keyword(s):  
Compressive Strength ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Rheological Behaviour ◽  
High Strength ◽  
Economic Benefits ◽  
Effective Dosage ◽  
Material Structure ◽  
Economic Point

Durability and high strength of concrete are closely associated with low porosity and generally denser material structure. This is achieved using the addition, which include also silica fume. This article deal with an effective dosage of silica fume in high performance concrete, in a proportion of 0-25 % by the weight of cement. Compressive strength, rheological behaviour and economic benefits were the main questions in this work. The expected increase in compressive strength showed itself in lower doses of silica fume, while higher doses did not produce a further increase in strength. In the case of rheological behaviour, we can confirm lower bleeding and segregation, but also faster drying of the surface layer. From the economic point of view, a small doses of silica fume are better, because then we have observed the highest increase in strength.

An Experimental Study on Evaluation of Mechanical Properties in High Performance Concrete Using Admixture

2013 ◽  
Vol 372 ◽  
pp. 231-234
Author(s):  
Jeong Eun Kim ◽  
Wan Shin Park ◽  
Nam Yong Eom ◽  
Sun Woong Kim ◽  
Do Gyeum Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Silica Fume ◽  
Modulus Of Elasticity ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Experimental Investigations ◽  
Binder Ratio

In this study, some experimental investigations on the development of mechanical properties with age of high performance concrete (HPC) incorporated with blast furnace slag with fly ash or silica fume have been reported. Four different blended HPC were prepared in 0.40 water-binder ratio. At every four mixtures, the compressive strength, splitting tensile strength and modulus of elasticity at 7 and 28 days have been observed for HPC developments. Consequently, only replacement of silica fume significantly increases the mechanical properties in terms of compressive strength, splitting tensile strength and modulus of elasticity.

Sign in / Sign up

Export Citation Format

Share Document