scholarly journals Meta-Analysis of Fiber Impact on Mechanical Properties of Ultra-High Performance Concrete

2020 ◽  
Author(s):  
Faiq M. Al-Zwainy ◽  
Hussam k. Risan ◽  
Rana I. K. Zaki
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
High Strength Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Meta Analysis ◽  
High Strength ◽  
Ultimate Compressive Strength ◽  
Ultra High Performance Concrete

The purpose of this study was to conduct a meta-analysis that shows the influence of fiber on ultimate compressive strength and tensile strength of ultra-high performance concrete. The internet scholarly search engines and ScienceDirect article references were used to illustrate the papers concerning the experimental investigations of mechanical properties of ultra-high strength concrete with and without fiber with clearly, completely and comparative raw data. The normal concrete test results were dismissed from this search. Seven trials were identified based on the adopted inclusion and exclusion criteria above. The meta-analysis based on standardized mean difference was carried out on the basis of a fixed-effects model for the major outcomes of the ultimate compressive and tensile properties of ultra-high performance concrete. A total of 888 test specimens were enrolled in these seven trials. The combined analysis yielded a sign of a significant improvement in ultimate compressive strength and tensile strength of ultra-high strength concrete with fiber addition of 2% by concrete volume. The summary effect size of ultimate compressive strength was 2.34 while a more improvement in term of tensile strength with effect size of 2.64. By addition fiber of 2% provides a significant benefit in mechanical properties of ultra-high performance concrete.

Factorial Design Approach of Ultra-High Performance Concrete

2013 ◽  
Vol 405-408 ◽  
pp. 2847-2850
Author(s):  
Wu Jian Long ◽  
Wei Lun Wang ◽  
Qi Ling Luo ◽  
Bi Qin Dong
Keyword(s):  
Mechanical Properties ◽  
Factorial Design ◽  
Statistical Models ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Design Approach ◽  
Ultra High Performance Concrete ◽  
Self Consolidating Concrete ◽  
Slump Flow

In order to understand the influence of mixture parameters on ultra-high strength self-consolidating concrete (UHS-SCC) behaviour, an experimental design was carried out in this investigation. In total, 19 SCC mixtures were prepared to determine several key responses that affect the slump flow and compressive strength of UHS-SCC. The statistical models derived from the factorial design approach can be used to quantify the effect of mixture parameters and their coupled effects on fresh and mechanical properties of SCC.

Material Properties of Ultra - High Performance Concrete in Extreme Conditions

2016 ◽  
Vol 711 ◽  
pp. 157-162 ◽  
Author(s):  
David Citek ◽  
Milan Rydval ◽  
Stanislav Rehacek ◽  
Jiří Kolísko
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Material Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Accurate Information ◽  
Extreme Conditions ◽  
Ultra High Performance Concrete ◽  
Freeze Thaw

The Ultra High Performance Concrete (UHPC) is a very promising material suitable for application in special structures. However, the knowledge of performance of this relatively new material is rather limited. The exceptional mechanical properties of UHPC allow for a modification of the design rules, which are applicable in ordinary or high strength concrete. This paper deals in more detail with impact of thermal stress on bond properties between prestressing strands and UHPC and an influence of high temperature to final material properties of different UHPC mixtures. Specimens in the first experimental part were subjected to the cycling freeze-thaw testing. The relationship between bond behavior of both type of material (UHPC and ordinary concrete) and effect of cycling freeze-thaw tests was investigated. The second part of experimental work was focused on mechanical properties of UHPC exposure to the high temperature (Tmax = 200°C to Tmax = 1000°C). Tested mechanical properties were compressive and flexural strengths, the fracture properties will be presented in the next paper. The obtained experimental data serve as a basis for further systematic experimental verification and more accurate information about the significantly higher material properties of UHP(FR)C and its behavior in extreme conditions.

Study on the Compressive Strength and Mixing of Ultra-High Performance Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 825-828
Author(s):  
Su Li Feng ◽  
Peng Zhao
Keyword(s):  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Strength Properties ◽  
Test Method ◽  
Test Results ◽  
Concrete Compressive Strength ◽  
Ultra High Performance Concrete ◽  
Mixture Ratio

The test in order to obtain liquidity, higher intensity ultra-high performance concrete(UHPC), in the course of preparation, high intensity quartz sand to replace the ordinary sand,reasonable mixture ratio control low water-cement ratio,the incorporation of part of the test piece ofsteel fibers, produced eight specimens . In the ordinary molding and the standard conservation 28d thecase, the ultra-high-performance concrete compressive strength of more than 170MPa.Thepreparation of the test method and test results will provide the basis for further study of the law of themechanical properties of ultra high strength properties of concrete.

scholarly journals State of the Art: Mechanical Properties of Ultra-High Performance Concrete

2017 ◽  
Vol 3 (3) ◽  
pp. 190-198 ◽  
Author(s):  
Mohamadtaqi Baqersad ◽  
Ehsan Amir Sayyafi ◽  
Hamid Mortazavi Bak
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
State Of The Art ◽  
High Strength ◽  
Structural Members ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
The Past ◽  
Very High

During the past decades, there has been an extensive attention in using Ultra-High Performance Concrete (UHPC) in the buildings and infrastructures construction. Due to that, defining comprehensive mechanical properties of UHPC required to design structural members is worthwhile. The main difference of UHPC with the conventional concrete is the very high strength of UHPC, resulting designing elements with less weight and smaller sizes.  However, there have been no globally accepted UHPC properties to be implemented in the designing process. Therefore, in the current study, the UHPC mechanical properties such as compressive and tensile strength, modulus of elasticity and development length for designing purposes are provided based on the reviewed literature. According to that, the best-recommended properties of UHPC that can be used in designing of UHPC members are summarized. Finally, different topics for future works and researches on UHPC’s mechanical properties are suggested.

scholarly journals Mechanical Properties of Ultra-High Performance Concrete before and after Exposure to High Temperatures

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 770 ◽  
Author(s):  
How-Ji Chen ◽  
Yi-Lin Yu ◽  
Chao-Wei Tang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Temperatures ◽  
High Performance ◽  
High Performance Concrete ◽  
Silicon Powder ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Splitting Strength ◽  
Experimental Group

Compared with ordinary concrete, ultra-high performance concrete (UHPC) has excellent toughness and better impact resistance. Under high temperatures, the microstructure and mechanical properties of UHPC may seriously deteriorate. As such, we first explored the properties of UHPC with a designed 28-day compressive strength of 120 MPa or higher in the fresh mix phase, and measured its hardened mechanical properties at seven days. The test variables included: the type of cementing material and the mixing ratio (silica ash, ultra-fine silicon powder), the type of fiber (steel fiber, polypropylene fiber), and the fiber content (volume percentage). In addition to the UHPC of the experimental group, pure concrete was used as the control group in the experiment; no fiber or supplementary cementitious materials (silica ash, ultra-fine silicon powder) were added to enable comparison and discussion and analysis. Then, the UHPC-1 specimens of the experimental group were selected for further compressive, flexural, and splitting strength tests and SEM observations after exposure to different target temperatures in an electric furnace. The test results show that at room temperature, the 56-day compressive strength of the UHPC-1 mix was 155.8 MPa, which is higher than the >150 MPa general compressive strength requirement for ultra-high-performance concrete. The residual compressive strength, flexural strength, and splitting strength of the UHPC-1 specimen after exposure to 300, 400, and 500 °C did not decrease significantly, and even increased due to the drying effect of heating. However, when the temperature was 600 °C, spalling occurred, so the residual mechanical strength rapidly declined. SEM observations confirmed that polypropylene fibers melted at high temperatures, thereby forming other channels that helped to reduce the internal vapor pressure of the UHPC and maintain a certain residual strength.

An Experimental Study on Evaluation of Mechanical Properties in High Performance Concrete Using Admixture

2013 ◽  
Vol 372 ◽  
pp. 231-234
Author(s):  
Jeong Eun Kim ◽  
Wan Shin Park ◽  
Nam Yong Eom ◽  
Sun Woong Kim ◽  
Do Gyeum Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Silica Fume ◽  
Modulus Of Elasticity ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Experimental Investigations ◽  
Binder Ratio

In this study, some experimental investigations on the development of mechanical properties with age of high performance concrete (HPC) incorporated with blast furnace slag with fly ash or silica fume have been reported. Four different blended HPC were prepared in 0.40 water-binder ratio. At every four mixtures, the compressive strength, splitting tensile strength and modulus of elasticity at 7 and 28 days have been observed for HPC developments. Consequently, only replacement of silica fume significantly increases the mechanical properties in terms of compressive strength, splitting tensile strength and modulus of elasticity.

scholarly journals Effect of Hybridization of steel fibers on the mechanical properties of high strength concrete

2018 ◽  
Vol 199 ◽  
pp. 11006
Author(s):  
M. Iqbal Khan ◽  
Wasim Abbass
Keyword(s):  
Mechanical Properties ◽  
High Strength Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Research Work ◽  
High Strength ◽  
Steel Fibers ◽  
Flexural Properties ◽  
Strength Concrete ◽  
Total Percentage

The hybridization of fibers for arresting the crack in concrete is a key factor and play an important role to improve mechanical properties of high performance concrete with respect to mono fibers. The effect of hybridization of hooked end steel fibers with different length and diameter on mechanical properties of high strength concrete was investigated in this research work. The different percentages of hook ended fibers (60 mm and 40 mm) are hybridized in the concrete mixture while keeping total percentage of fibers by volume equal to 1%. The compressive and flexural properties with complete load verses deflection curves of hybrid steel fiber reinforced high performance concrete were investigated to find the optimized dosage of hybrid steel fibers. The results showed that the hybridization of fiber provided better compressive and flexural performance. It was also observed from the results that combination of 65% of 60 mm and 35% of 40 mm hooked end fibers proved to be best for enhancement in compressive and flexural properties.

The Effect of Mineral Admixtures on Mechanical Properties of High Performance Concrete at very Low Temperature

2014 ◽  
Vol 584-586 ◽  
pp. 1509-1513
Author(s):  
Nan Zhang ◽  
Juan Liao ◽  
Tao Zhang ◽  
Wen Zhan Ji ◽  
Bao Hua Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Low Temperature ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Mineral Admixtures ◽  
The Difference ◽  
Very Low Temperature

The effect of very low temperature on high performance concrete (HPC) mechanical properties is studied by using a reasonable testing method. The results show that the compressive strengths of concrete are increasing with lower temperatures. Fly ash (FA), compared to ground granulated blast-furnace slag (GGBFS), is positive to the compressive strength increasing at low temperature. The splitting tensile strengths of concrete appear a maximum at-40°C~-80°C. The compound replacement by GGBFS and FA makes the splitting tensile strength present the extreme value at higher temperature. At very low temperature, the single or compound replacement by mineral admixtures can result in the difference of the relationship between compressive strength and splitting tensile strength, and the degradation of concrete subjected to cold-thermal shocks.

Influence of Metakaolin on Mechanical Properties of High-Performance Concrete

2010 ◽  
Vol 168-170 ◽  
pp. 1904-1909
Author(s):  
Bao Min Wang ◽  
Wei Liu
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Equal Mass ◽  
Test Results ◽  
Optimum Temperature ◽  
Compressive Strength Of Concrete ◽  
And Performance

Kaolin is a material with broad sources and a low price. Metakaolin is made from kaolin which is calcined, finely ground at an optimum temperature of 750 being kept constant for 4 hours. High strength and performance concrete can be mixed from metakaolin as a substitute for equal mass cement. The influences of 5%, 10% and 15% metakaolin in substitution of equal cement masses were studied on the mechanical properties of high-performance concrete. The test results showed that the addition of metakaolin improved the cubic compressive strength, splitting tensile strength and flexural strength of HPC, among which the improvement in compressive strength was the most siginificant, and simultaneously, there was also an improvement in concrete toughness in a certain degree. The optimum content of metakaolin is 10% resulting in an increase of the cubic compressive strength of concrete by 8.3% correspondingly.

Ultra-high performance concrete – properties and technology

2013 ◽  
Vol 61 (1) ◽  
pp. 183-193 ◽  
Author(s):  
T. Zdeb
Keyword(s):  
Mechanical Properties ◽  
Hydrothermal Treatment ◽  
High Performance ◽  
High Performance Concrete ◽  
Qualitative Evaluation ◽  
High Strength ◽  
Ultra High Performance Concrete ◽  
Characteristic Features ◽  
Reactive Powder ◽  
New Generation

Abstract The paper deals with information concerning properties and technology of a new generation cementitious composite i.e. Ultra-High Performance Concrete. High performance here means both high strength and high durability under the influence of environmental factors. This group of composites is mainly represented by Reactive Powder Concretes (RPC), which show both outstanding durability and mechanical properties. Characteristic features of RPC are mainly due to the very low water-cement ratio, which involves application of superplasticizer, significant reduction of aggregate grains size as well as hydrothermal treatment. In the first part of the paper selected properties of RPC are compared to ordinary concrete and to other groups of new generation concrete. Moreover, fundamental technological factors influencing properties of RPC are described as well. The second part deals with the RPC developed at Cracow University of Technology. The presented test results are mainly focused on the influence of steel fibres content on mechanical properties of reactive powder concrete and hydrothermal treatment on composites microstructure. The quantitative and qualitative evaluation of this relationship expand the knowledge of the UHPC technology. Finally, the third part presents the most significant and newest structures which have been erected with the use of RPC

Sign in / Sign up

Export Citation Format

Share Document