scholarly journals ORE MINERALS FROM KUROKO TYPE DEPOSIT OF TOYA-TAKARADA MINE, HOKKAIDO, JAPAN

2016 ◽  
Vol 11 (2) ◽  
pp. 103-115
Author(s):  
Euis Tintin Yuningsih, ST., MT., Ph.D
Keyword(s):  
Middle Miocene ◽  
Silver Content ◽  
Quantitative Chemical Analysis ◽  
Sulfur Fugacity ◽  
Fine Grained ◽  
Sulfide Ore ◽  
Ore Minerals ◽  
Ore Mineralization ◽  
Small Grains ◽  
Homogenization Temperatures

Toya-Takarada mine is Au- and Ag-rich Kuroko-type deposit located in Takarada, Toya-mura, southwest Hokkaido, Japan. The deposits were hosted in rhyolitic tuff and mudstone of Middle Miocene age. Ore samples of fine-grained black ore, vuggy black-yellow ore, granular vuggy black ore, quartz-sulfide ore and massive quartz-barite ore were studied to identify the ore minerals association in the Toya-Takarada mine. The ore minerals are dominated by sphalerite, galena, chalcopyrite and pyrite with fewer amounts of electrum, tetrahedrite-tennantite, and other sulfosalt minerals with secondary mineral of covellite.The quantitative chemical analysis of ore minerals by EPMA indicated that FeS contents in sphalerite is low (0.3-1.2 mol.%) in all kinds of ore samples. Small grains of electrum as inclusions in pyrite are identified in vuggy black-yellow ore with Ag content around 32-33 atm %.In general, the silver minerals in Kuroko-type deposits occurred mainly in the black and yellow ores zone dominantly composed of sphalerite, galena, pyrite, chalcopyrite and barite as a form of electrum and/or argentian tetrahedrite-tennantite series. Thus, the massive quartz-barite ore sample of Toya-Takarada mine are also contain some rare silver sulfosalt minerals such as proustite, Cu-rich pearceite, geocronite-jordanite and fizelyite. Those minerals were found together in association with sphalerite. It seems that sphalerite was crystallized first followed by proustite and Cu-rich pearceite, then geocronite-jordanite and fizelyite are crystallized later.Sphalerites from quartz-sulfide ore of Toya-Takarada contain some fluid inclusions and measured homogenization temperatures are in the range of 164-247°C (av. 208°C) with salinity ranging from 1.9 to 4.7 wt.% NaClequiv. (av. 3.9 wt.% NaClequiv.). The mineral assemblage, iron content in sphalerite and silver content in electrum were indicated that sulfur fugacity was slightly higher during ore mineralization in Toya-Takarada mine.   

scholarly journals Výskyty hydrotermálnej Sb-Au mineralizácie na lokalitách Lomnistá, Husárka a Suchá dolina pri Jasení (Nízke Tatry)

2020 ◽  
Vol 28 (1) ◽  
pp. 210-218
Author(s):  
Štefan Čík ◽  
Martin Chovan ◽  
Juraj Majzlan
Keyword(s):  
Primary Sources ◽  
Two Phase ◽  
Alluvial Sediments ◽  
Secondary Minerals ◽  
Reflected Light ◽  
Ore Minerals ◽  
Ore Mineralization ◽  
Homogenization Temperatures ◽  
Rock Alteration ◽  
Phase Fluid

Ore mineralization in small Sb-Au occurrences Lomnistá, Husárka and Suchá dolina (Nízke Tatry Mts., Western Carpathians) was investigated by reflected-light microscopy, electron microprobe, fluid inclusion measurements, identification of host rock alteration and secondary minerals. Hydrothermal Sb-Au mineralization was formed during the arsenopyrite-pyrite-gold and stibnite-Pb-Sb-sulfosalts stages. The first stage of mineralization consists of arsenopyrite, pyrite, and quartz, but gold, typical for this stage in the Nízke Tatry Mts. is missing. Stibnite and zinkenite are dominant in the following stage in Lomnistá and Husárka. Berthierite and jamesonite are frequent in Suchá dolina. Other ore minerals identified here are sphalerite, chalcostibite, chalcopyrite, cinnabar, tetrahedrite-(Hg) at Lomnistá and Husárka and pyrrhotite, chalcostibite, tetrahedrite-(Fe), chalcopyrite, antimony, and gold in Suchá dolina. Identified secondary minerals are valentinite and stibiconite. Stibnite, gold, and other ore minerals were found in heavy-mineral fractions from alluvial sediments, pointing at short transport from the primary sources. Two quartz samples, thought to be related to stibnite or berthierite, contained two-phase fluid inclusions with salinity of 10 - 20 wt.% NaCl eq. The total homogenization temperatures are 230 - 330 ºC in Lomnistá and 200 - 260 ºC in Suchá dolina.

scholarly journals Ore Genesis of the Chuduoqu Pb-Zn-Cu Deposit in the Tuotuohe Area, Central Tibet: Evidence from Fluid Inclusions and C–H–O–S–Pb Isotopes Systematics

Minerals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 285 ◽  
Author(s):  
Yong-Gang Sun ◽  
Bi-Le Li ◽  
Feng-Yue Sun ◽  
Ye Qian ◽  
Run-Tao Yu ◽  
...  
Keyword(s):  
Fluid Inclusions ◽  
Stage Iv ◽  
Isotopic Compositions ◽  
Ore Bodies ◽  
Metallogenic Belt ◽  
Ore Minerals ◽  
Ore Mineralization ◽  
Deposit Type ◽  
Homogenization Temperatures ◽  
Central Tibet

The Chuduoqu Pb-Zn-Cu deposit is located in the Tuotuohe area in the northern part of the Sanjiang Metallogenic Belt, central Tibet. The Pb-Zn-Cu ore bodies in this deposit are hosted mainly by Middle Jurassic Xiali Formation limestone and sandstone, and are structurally controlled by a series of NWW trending faults. In this paper, we present the results of fluid inclusions and isotope (C, H, O, S, and Pb) investigations of the Chuduoqu deposit. Four stages of hydrothermal ore mineralization are identified: quartz–specularite (stage I), quartz–barite–chalcopyrite (stage II), quartz–polymetallic sulfide (stage III), and quartz–carbonate (stage IV). Two types of fluid inclusions are identified in the Chuduoqu Pb-Zn-Cu deposit: liquid-rich and vapor-rich. The homogenization temperatures of fluid inclusions for stages I–IV are 318–370 °C, 250–308 °C, 230–294 °C, and 144–233 °C, respectively. Fluid salinities range from 2.07 wt. % to 11.81 wt. % NaCl equivalent. The microthermometric data indicate that the fluid mixing and cooling are two important mechanisms for ore precipitation. The H and O isotopic compositions of quartz indicate a primarily magmatic origin for the ore-forming fluids, with the proportion of meteoric water increasing over time. The C and O isotopic compositions of carbonate samples indicate that a large amount of magmatic water was still involved in the final stage of mineralization. The S and Pb isotopic compositions of sulfides, demonstrate that the ore minerals have a magmatic source. On a regional basis, the most likely source of the metallogenic material was regional potassium-enriched magmatic hydrothermal fluid. Specifically for the Chuduoqu Pb-Zn-Cu deposit, the magmatic activity of a syenite porphyry was the likely heat source, and this porphyry also provided the main metallogenic material for the deposit. Mineralization took place between 40 and 24 Ma. The Chuduoqu deposit is a mesothermal hydrothermal vein deposit and was formed in an extensional environment related to the late stage of intracontinental orogenesis resulting from India–Asia collision. The determination of the deposit type and genesis of Chuduoqu is important because it will inform and guide further exploration for hydrothermal-type Pb and Zn deposits in the Tuotuohe area and in the wider Sanjiang Metallogenic Belt.

scholarly journals Origin of the Kyaukmyet Low-Sulfidation Epithermal Gold Prospect, Monywa District, Central Myanmar

2021 ◽  
Vol 54 (1E) ◽  
pp. 1-18
Author(s):  
Toe Oo ◽  
Agung Harijoko ◽  
Lucas Setijadji
Keyword(s):  
Magmatic Fluid ◽  
Epithermal Gold ◽  
Quartz Veins ◽  
Mineral Assemblages ◽  
Epithermal Gold Deposit ◽  
Ore Minerals ◽  
Ore Mineralization ◽  
Alteration Minerals ◽  
Homogenization Temperatures ◽  
Low Sulfidation

The Kyaukmyet prospect is one of the principal epithermal gold prospects in the Monywa District, Central Myanmar; its gold- and base metal-bearing quartz veins contain around 3 g/t gold. Ore minerals are mainly hosted by volcanic and volcaniclastic rocks of the Late Oligocene to Middle Miocene Magyigon Formation. The distribution of magmatic intrusions in the area is controlled by ENE-WSW trending faults; these faults are likely related to ore mineralization. Common ore minerals at the Kyaukmyet prospect include pyrite, sphalerite, galena, chalcopyrite, and electrum. They occur in mineralized crustiform-textured brecciated quartz veins and banded (colloform) and massive quartz veins. Mineralized rock is accompanied by silicification and propylitic and argillic alterations. The alteration mineral assemblages include quartz, adularia, calcite, chlorite, illite/smectite, sericite, and illite. Fluid inclusions in the quartz veins have homogenization temperatures ranging from 148 °C to 304 °C and salinities from 0.35 wt % to 2.75 wt % NaCl equiv. The quartz in the mineralized quartz veins was most likely precipitated at a depth ranges165-256 m below the paleosurface. The precipitation of gold at the Kyaukmyet prospect may have been formed by mixing large amounts of meteoric fluid with small amounts of magmatic fluid. The coexistence of liquid-rich and vapor-rich inclusions and presence of adularia and bladed calcite indicate that fluid boiling is caused the main mechanism of ore formation. The vein textures, ore mineral assemblages, alteration minerals and fluid inclusion data suggest that the Kyaukmyet prospect is a polymetallic low-sulfidation epithermal gold deposit.

scholarly journals Geochemistry of tetrahedrite group minerals and associated silver paragenesis in the Boguszów baryte deposit, Poland

2020 ◽  
Vol 64 (4) ◽  
Author(s):  
Sławomir Mederski ◽  
Jaroslav PRSEK ◽  
Żaneta Niemasz
Keyword(s):  
Textural Features ◽  
Upper Carboniferous ◽  
Reflected Light ◽  
Ore Minerals ◽  
Ore Mineralization ◽  
Crystallization Conditions ◽  
Low Temperature Crystallization ◽  
Small Grains ◽  
The 19Th Century ◽  
Temperature Crystallization

Primary ore mineralization in the abandoned Boguszów baryte-polymetallic deposit, located in the Intra-Sudetic Depression, was studied by reflected light microscopy and electron microprobe. Ore minerals, occurring as veinlets, irregular aggregates and lenses in baryte veins are hosted by the Upper Carboniferous Chełmiec rhyodacite laccolith. They are dominated by galena, sphalerite (with Cd up to 0.04 apfu) and tetrahedrite group minerals (TGM). Four generations of the TGM were distinguished according to textural features and Ag content: (1) low-Ag tetrahedrite-(Zn) (Ag: 0.22–0.6 apfu), (2) Ag-enriched tetrahedrite-(Zn) and Ag-enriched tetrahedrite-(Fe) (Ag: 0.71–1.45 apfu), (3) members of the freibergite series: “freibergite-(Fe)” and “freibergite-(Zn)” (Ag: 3.21–3.48 apfu; Hg: up to 0.75 apfu), (4) member of the “freibergite-(Fe)” series (Ag: 5.32–5.78 apfu). Several elongated inclusions of Ag-bearing sulphosalts within galena crystals were observed (members of the series “freibergite-(Fe)” and “freibergite-(Zn)”, pyrargyrite and polybasite). These polymetallic silver-bearing ores were mined in Boguszów from the 15th to the 19th century. Additionally, small grains of cobalt-enriched löllingite and gersdorffite were observed, which were formed from fluids sourced from the ultramafic basement. The textural characteristics of the ore, the mineral paragenesis and the chemical composition of individual ore minerals indicate low-temperature crystallization conditions.

Mechanism of mixed dithiophosphate and mercaptobenzothiazole collectors for Cu sulfide ore minerals

2017 ◽  
Vol 109 ◽  
pp. 80-97 ◽  
Author(s):  
Alan N. Buckley ◽  
Gregory A. Hope ◽  
Gretel K. Parker ◽  
Johan Steyn ◽  
Ronald Woods
Keyword(s):  
Sulfide Ore ◽  
Ore Minerals

Heklaite, KNaSiF6, a new fumarolic mineral from Hekla volcano, Iceland

2010 ◽  
Vol 74 (1) ◽  
pp. 147-157 ◽  
Author(s):  
A. Garavelli ◽  
T. Balić-Žunić ◽  
D. Mitolo ◽  
P. Acquafredda ◽  
E. Leonardsen ◽  
...  
Keyword(s):  
Powder Diffraction ◽  
Quantitative Chemical Analysis ◽  
Unit Cell Parameters ◽  
Orthorhombic Space Group ◽  
Synthetic Compound ◽  
Calculated Density ◽  
X Ray ◽  
Cell Parameters ◽  
Fine Grained ◽  
The Ideal

AbstractHeklaite, with the ideal formula KNaSiF6, was found among fumarolic encrustations collected in 1992 on the Hekla volcano, Iceland. Heklaite forms a fine-grained mass of micron- to sub-micron-sized crystals intimately associated with malladrite, hieratite and ralstonite. The mineral is colourless, transparent, non-fluorescent, has a vitreous lustre and a white streak. The calculated density is 2.69 g cm–3. An SEM-EDS quantitative chemical analysis shows the following range of concentrations (wt.%): Na 11.61–12.74 (average 11.98), K 17.02–18.97 (average 18.29), Si 13.48 –14.17 (average 13.91), F 54.88–56.19 (average 55.66). The empirical chemical formula, calculated on the basis of 9 a.p.f.u., is Na1.07K0.96Si1.01F5.97. X-ray powder diffraction indicates that heklaite is orthorhombic, space group Pnma, with the following unit-cell parameters: a = 9.3387(7) Å, b = 5.5032(4) Å, c = 9.7957(8) Å , V = 503.43(7) Å3, Z = 4. The eight strongest reflections in the powder diffraction pattern [d in Å (I/I0) (hkl)] are: 4.33 (53) (102); 4.26 (56) (111); 3.40 (49) (112); 3.37 (47) (202); 3.34 (100) (211); 2.251 (27) (303); 2.050 (52) (123); 2.016 (29) (321). On the basis of chemical analyses and X-ray data, heklaite corresponds to the synthetic compound KNaSiF6. The name is for the type locality, the Hekla volcano, Iceland.

Telluride Mineralogy of the Deer Horn Au-Ag-Te-(Bi-Pb-W) Deposit, British Columbia: Implications for the Generation of Tellurides

2021 ◽  
Author(s):  
Jordan A. Roberts ◽  
Lee A. Groat ◽  
Paul G. Spry ◽  
Jan Cempírek
Keyword(s):  
British Columbia ◽  
Fluid Inclusions ◽  
Hanging Wall ◽  
Oscillatory Zoning ◽  
Stage Iii ◽  
Fine Grained ◽  
Melting Temperatures ◽  
Homogenization Temperatures ◽  
Intrusive Suite ◽  
Cathodoluminescence Imaging

ABSTRACT The Deer Horn deposit, located 150 km south of Smithers in west-central British Columbia, is an Eocene polymetallic system enriched in Au-Ag-Te with lesser amounts of Bi-Pb-W; the Au and Ag are hosted in Te-bearing minerals and Ag-rich gold (Au-Ag alloy). A quartz-sulfide vein system containing the main zones of Au-Ag-Te mineralization and attendant sericite alteration occurs in the hanging wall of a local, spatially related thrust fault and is genetically related to the nearby Eocene Nanika granodiorite intrusive suite. Tellurium-bearing minerals commonly form isolated euhedral to subhedral grains or composite grains (up to 525 μm in size) of Ag-, Bi-, Pb-, and Au-rich tellurium-bearing minerals (e.g., hessite, tellurobismuthite, volynskite, altaite, and petzite). Panchromatic cathodoluminescence imaging revealed four generations of quartz. Within remnant cores of quartz I, local oscillatory zoning occurs in quartz II. Fine-grained veinlets of quartz III and IV crosscut quartz I and II, showing evidence of at least two deformation events; late-forming veinlets of calcite crosscut all generations of quartz. The tellurides and Ag-rich gold occur in stage III quartz. Three types of fluid inclusions were observed in stage III and IV quartz: (1) aqueous liquid and vapor inclusions (L-V); (2) aqueous carbonic inclusions (L-L-V); and (3) carbonic inclusions (vapor-rich). Primary fluid inclusions related to the telluride mineralization within quartz III were tested with microthermometry, along with a few primary inclusions from quartz IV. Homogenization temperatures are 130.0–240.5 °C for L-V inclusions and 268.0–336.4 °C for L-L-V inclusions. Aqueous carbonic inclusions had solid CO2 melting temperatures from –62.1 to –56.8 °C, indicating the presence of ≈1 to 30 mol.% dissolved methane in these inclusions. The Deer Horn Au-Ag-Te-(Bi-Pb-W) deposit is a reduced intrusion-related gold system characterized by sheeted veins, metal zoning, low salinity aqueous-carbonic fluids, and a genetic relationship to an Eocene granodiorite. Values of δ34S of pyrite vary from –1.6 to 1.6 per mil and are compatible with a magmatic source of sulfur.

scholarly journals PEMODELAN BAWAH PERMUKAAN MANIFESTASI MINERAL DENGAN METODE GEOMAGNETIK DAERAH PACITAN JAWA TIMUR

KURVATEK ◽  
2019 ◽  
Vol 4 (1) ◽  
pp. 25-33
Author(s):  
Fatimah Fatimah
Keyword(s):  
Image Data ◽  
Geological Structure ◽  
Magnetic Data ◽  
Magnetic Intensity ◽  
Magmatic Arc ◽  
The North ◽  
Ore Minerals ◽  
Ore Mineralization ◽  
Extensional Structure ◽  
Anomaly Map

Tulakan Subdistrict, Pacitan Regency, East Java Province. This area is part of the Southern Mountain Zone of East Java, which is the Sunda-Banda magmatic arc of Oligo-Miocene age, where there are alterations and indications of valuable ore minerals. Field magnetic data is taken in an area of 1 x 1 km, with the looping method on the grid trajectory within 200 x 100 m. Then, magnetic data correction and data processing were carried out with Oasis Montaj. From the magnetic anomaly map, the value of high magnetic intensity in the southern part is fresh (intrusive) andesit-dasitic rock as host rock which causes alteration, in the middle has a low magnetic intensity value which is in the direction of the relatively NE-SW river direction, whereas in the north with high intensity is fresh andesite lava. From the image data, it can be seen that the straightness pattern of the geological structure which is dominated by the extensional structure with the direction of NE-SW and E-W is the main trap of epithermal veins carrying ore mineralization mainly Cu, Pb in the study area.

scholarly journals GRANITOIDS, RARE-METAL PEGMATITES AND Ta-Nb MINERALIZATION OF SHPOLIANO-TASHLYK ORE AREA (INGUL MEGABLOCK, UKRAINIAN SHIELD)

2018 ◽  
pp. 24-29
Author(s):  
O. Hrinchenko ◽  
S. Bondarenko ◽  
T. Mironchuk
Keyword(s):  
Rare Metal ◽  
Ukrainian Shield ◽  
Wide Range ◽  
Ore Minerals ◽  
Ore Mineralization ◽  
Isomorphic Series ◽  
Single Complex ◽  
Complex Features ◽  
First Time ◽  
Range Of Values

Composition of granites, genetically associated pegmatites and superimposed metasomatites distributed within Shpoliano-Tashlyk ore area (Ingul megablock) is considered. It is established, that on the basis of similarity in their petrographic and petrochemical features granitoids of the area can be related to single complex. Features of ore mineralization are defined by both composition of granitoids (Sgranites) after which rare-metal pegmatites are formed and intensity of superimposed metasomatic alterations. Main minerals-concentrators of Ta and Nb mineralization in granitic pegmatites and metasomatites are represented by minerals of three isomorphic series – columbite-tantalite (Fe,Mn)(Nb,Ta,Ti)2O6, ilmenorutile-struverite (Ti,Nb,Ta)O2 and pyrochlore-microlite (Ca,Na)2Ta2O6(O,B,OH,F). Depending on geological setting such ore minerals as tapiolite, ixiolite, cassiterite, uraninite, nigerite, gahnite are commonly found in association with these minerals. Chemical composion of tantalo-niobates sampled from ore-bearing pegmatites and metasomatites is investigated by microprobe analysis. Most minerals of columbite-tantalite series are characterized by distinct and rhythmic internal zonality and contrasting mosaic structure which are related to considerable heterogeneities of their chemical composition. Within one aggregate mineral phases with wide range of values – from 9,80 to 71,0 % for Ta2O5 and from 10,6 to 70,1 % for Nb2O5 – are established. Among minerals ferruginous varieties which composition relates to Fe-columbite-tantalites (Nb2O5/Ta2O5 = 1–1,2; FeO/MnO = 2,5–6) prevail. Columbite-tantalites are characterised by high contents of admixture elements present (%): TiO2 – to 5,88; WO3 – to 3,70; SnO2 – to 9,20; Sc2O3 – to 5,40. Scandium ores occur as scandium-rich minerals that are mostly confined to the minerals of columbite-tantalite series found in Polohivka ore field. On the Ukrainian Shield high contents of Sc2O3 in tantalo-niobates are established for the first time. Minerals of ilmenorutile-struverite series do not quantitatively yield to minerals of columbite-tantalite series. For minerals of this series Nb2O5/Ta2O5 ratio varies in the range of 0,6-1,4. Among characteristic admixture-elements are prevailed (%): SnO2 – to 3,1, V2O5 – to 5,05; FeO – to 11,51, Cr2O3 – to 1,20. Minerals of pyrochlore-microlite series are of subordinate importance. For the first time by results of U-Pb dating of columbite-tantalites from Mostove ore manifestation (Shpoliano-Tashlyk area) the age of Ta-Nb mineralization is established to be about 1965 ± 25 million years.

Sign in / Sign up

Export Citation Format

Share Document