Talking about the Quality and Safety Management in Municipal Engineering Construction

2021 ◽  
2019 ◽  
Vol 2019 (6) ◽  
pp. 15-23 ◽  
Author(s):  
Игорь Иванов ◽  
Igor' Ivanov

The article presents main approaches to provision of quality and safety of medical organization’s activities. The main attention is focused on the issues of implementation of the Suggestions (recommended practice) of Roszdravnadzor on organization of the internal quality and safety control of medical activities, as well as particular points of the Order of June 7, 2019 No. 381n “On Approval of Requirements for organization and conduction internal control of the quality and safety of medical care in hospitals”.


2013 ◽  
Vol 380-384 ◽  
pp. 4663-4666
Author(s):  
Huang Tao Qian ◽  
Xiao Ying Huang ◽  
Zheng Yu Bao ◽  
Xiang He Ye

As an example of the research on zhejiang local agricultural management, this paper analyzes the research results and summarizes the different agricultural management characteristics.From overall tracking of farmland to table process and grasping the key of management, thinking the problems of security and standardization on produce quality management information. At last, it combines with our actual development situation of our countrysagricultural,product quality anagement,innovation and build a new quality and safety management system, providing theory basis of agricultural management system.


Author(s):  
Natalia A. Jurk ◽  

In order to achieve a certain level of food production, it is necessary to manage its quality and safety. Currently, the quality management system based on the principles of HACCP is widely recognized and is the only method for ensuring food security in all developed countries. The ultimate goal of this system is to eliminate or reduce any food safety risks by preventing them. During the research, the main, auxiliary raw materials and the finished product were identified; flowcharts for the production of an enriched whey drink were developed. On the basis of the developed block diagrams, an analysis of microbiological, chemical, physical and qualitative hazards was carried out, it was determined which of the hazardous factors are the most critical, can harm health and must be eliminated or reduced to acceptable levels. Based on the analysis of significant hazards using the Decision Tree algorithm, two critical control points (pasteurization and cooling) were established. Measures for the management of critical control points are established in the HACCP plan, which reflects all CCPs of the production process of the research object and actions for monitoring and managing them. The introduction of elements of a food safety management system into practice contributes to the production of safe products of appropriate quality in compliance with applicable requirements and standards.


Author(s):  
Н.В. АГЕЕВА ◽  
В.К. КОЧЕТОВ ◽  
Е.Ю. ЛИТВИНЕНКО

Рассмотрен опыт внедрения системы менеджмента безопасности пищевой продукции на ОАО Кондитерский комбинат «Кубань». Установлены физические, химические и микробиологические факторы, снижающие безопасность продукции, производимой на ОАО Кондитерский комбинат «Кубань», – мучных кондитерских изделий и продукции цеха шоколадного производства. Перечислены разработанные и внедренные на комбинате пререквизитные программы для предупреждения опасности загрязнения продукции. Установлено, что внедрение превентивных мер позволило: поэтапно сократить количество критических контрольных точек на комбинате с 88 до 4, обеспечить отсутствие рекламации по качеству и безопасности выпускаемой продукции от контролирующих органов, снизить в 2019 г количество претензий от потребителей на 10%. по сравнению с 2018 г. The experience of implementing the food safety management system at OJSC Kuban Confectionery plant is shown. Physical, chemical and microbiological factors that reduce the safety of products produced at the Kuban Confectionery plant-flour confectionery products and products of the chocolate production workshop, have been established. Preliminary programs developed and implemented at the plant to prevent the risk of contamination of products are listed. It was found that the introduction of preventive measures allowed: to gradually reduce the number of critical control points at the plant from 88 to 4, to ensure that there are no complaints about the quality and safety of products from regulatory authorities, to reduce by 10% in 2019 the number of claims from consumers compared to 2018.


Author(s):  
Yuepeng Liu ◽  
Zhigang Zhang ◽  
Quan Yang ◽  
Qiang Zhang ◽  
Zhen’an Liu

For a country, the industry is a very important system, the embodiment of the country's comprehensive national strength, the country's economic development level and the development of science and technology level has direct impact on industry. The development of chemical industry also has great impetus to the national economic development. The technical requirements for chemical engineering are particularly high. Because of the danger of the chemical itself, safety becomes the first thing to notice in the construction process. In order to prevent the occurrence of danger in the actual construction process, the safety of chemical engineering construction is made, and the effective safety management is the most critical step. A reliable safety management is the guarantee for the smooth construction of the construction, so the early safety management becomes the key to the development of the chemical industry. Chemical engineering is an extremely complex and changeable system, and the kinds of problems involved are very many, which requires the construction personnel to pay more attention to ensure the safety. In order to implement the safety management measures in the process of chemical engineering construction, it is necessary for the management personnel to strictly control the whole construction process. In case of any problem, we should deal with it in a timely manner and pay more attention to the details. We should pay attention to fire prevention, pollution prevention and anti-explosion prevention. Technical personnel should pay more attention to technical problems and eliminate safety hazards. The construction company must also strengthen the personal quality of the project management personnel and other issues. It is necessary to examine personal responsibility and safety awareness and avoid unnecessary losses caused by various construction safety issues to the company[1].


Sign in / Sign up

Export Citation Format

Share Document