scholarly journals Dielectric spectroscopy of aluminum oxide (γ-Al2O3)

2021 ◽  
Author(s):  
M. M. Abdullah ◽  

Aluminum oxide (Al2O3) are continuously demonstrating the functional characteristics in devices. The physiochemical properties of hydrothermally as-grown Aluminum oxide (Al2O3) have been investigated in this research article. The as-prepared material was confirmed as γ- phase formation of Al2O3. The average crystallite size was found ∼ 78 nm, whereas the particles were found in nano scale too. Moreover, the absence of impurity in EDS analysis, and the presence of the bending vibrations of Al-O-Al and Al-O band in FTIR characterization further confirmed the absence of impurity in the material. Evaluated dielectric properties such as a relatively high dielectric constant, and low dielectric loss indicated the good optical quality of γ- Al2O3. Impedance and modulus spectroscopic studies showed the non-Debye type relaxation in γ- Al2O3 with an average relaxation time of 5.8 μs. Overall, the dielectric spectroscopy analysis of γ- Al2O3 indicates the promising applications of γ- Al2O3 in devices as dielectrics.

2020 ◽  
Author(s):  
Hemant Kumar Dubey ◽  
Preeti Lahiri

Abstract In the present work, Ni0.6Cd0.4DyxFe2‒xO4 (x = 0.0, 0.05, 0.10, 0.15 and 0.20) nanoparticles (NPs) were synthesized by using sol-gel auto combustion method. The structural characterization was performed by XRD, FTIR, SEM, TEM and EDS analyses. XRD patterns confirmed that the pure and dysprosium substituted Ni-Cd ferrites are in single phase spinel structures, while a trace of DyFeO3 appears as a minor phase for higher concentrations (x = 0.10, 0.15 and 0.20). The Debye‒Scherrer’s method and Williamson-Hall (W-H) method were used to evaluate the crystallite sizes and lattice strain. The average crystallite size was found to be in the range from 27 to 48 nm. FT-IR confirms the formation of spinel structure. SEM images show that reduction of grain size with Dy3+ content. Elemental composition features of samples were examined by EDS. The average particles size estimated from TEM analysis are in good agreement with results obtained from the XRD. The results showed that saturation magnetization (Ms) decreases and coercivity (Hc) increases with increase in Dy3+ concentrations. The dielectric constant and the loss tangent decrease rapidly with increasing frequency and then reaches a constant value, characteristic of normal behavior of ferrites. The dielectric constant was found to decrease with increasing Dy content in Ni-Cd ferrites. Ferrite sample with Dy3+ concentration, x = 0.05 show high dielectric constant, low dielectric loss and hence can be utilized in high frequency electrical circuits.


2018 ◽  
Vol 6 (9) ◽  
pp. 2370-2378 ◽  
Author(s):  
Yang Liu ◽  
Cheng Zhang ◽  
Benyuan Huang ◽  
Xu Wang ◽  
Yulong Li ◽  
...  

A novel skin–core structured fluorinated MWCNT nanofiller was prepared to fabricate epoxy composite with broadband high dielectric constant and low dielectric loss.


RSC Advances ◽  
2017 ◽  
Vol 7 (38) ◽  
pp. 23309-23312 ◽  
Author(s):  
Ting Yang ◽  
Wenhui Xu ◽  
Xinwen Peng ◽  
Haoqing Hou

Crown ether-containing polyimides possess high dielectric constant and low dielectric loss, without sacrificing other properties.


2021 ◽  
Author(s):  
Shashwat Shukla ◽  
Gerald Wesley Patterson

<p>One of the unique candidates to explore the evolution of physical surface processes on the Moon is Tycho, a dark haloed impact crater representing well-preserved bright ray pattern and intact crater morphology. Sampling of the central peak in such complex crater formation proves significant in terms of unraveling intriguing science of the lunar interior. With the current state-of-the-art radar technology, it is possible to evaluate the response of the geologic features constrained in the near surface and subsurface regolith environments. This can be achieved by modelling the dielectric constant of media, which is a physical parameter crucial for furthering our knowledge about the distribution of materials within different stratigraphic layers at multiple depths. Here, we used the applicability of Mini-RF S-band data augmented with a deep learning based inversion model to retrieve the dielectric variations over the central peak of the Tycho crater. A striking observation is made in certain regions of the central peak, wherein we observe anomalously high dielectric constant, not at all differentiated in the hyperspectral image and first Stokes parameter image, which usually is a representation of retrieved backscatter of the target. The results are also supported by comparing the variations in the scattering mechanisms. We found those particular regions to be associated with high degree of depolarization, thereby attributing to the presence of cm- to m- scale scatterers buried within a low dielectric layer that are not big enough to produce even-bounce geometry for the radar wave. Moreover, we also observe high rock concentration in the central peak slopes from DIVINER data and NAC images, indicating the exposure of clasts ranging in size from 10 meter to 100s of meter. Furthermore, from surface temperature data, these distinctive outcrops sense warmer temperature at night than the surrounding, which suggests the existence of thermal skin depth in such vicinities. Interestingly, we are able to quantify the pessimistic dielectric constant limit of the large boulder in the middle of the central peak, observable at the Mini-RF radar wavelength, as 4.54 + j0.077. Compared to the expected dielectric constant of rocks, this value is lowered significantly. One probable reason could be the emergence of small radar shadows due to the rugged surface of the boulder on the radar illuminated portion. From our analysis, we showcase the anomalous dielectric variability of Tycho central peak, thereby providing new insights into the evolution of the impact cratering process that could be important for both science and necessary for framing human or robotic exploration strategies.  </p>


Author(s):  
Jiahui Chen ◽  
Jingzhen Hu ◽  
Yongjia Xu ◽  
Robert Krasny ◽  
Weihua Geng

A common approach to computing protein pKas uses a continuum dielectric model in which the protein is a low dielectric medium with embedded atomic point charges, the solvent is a high dielectric medium with a Boltzmann distribution of ionic charges, and the pKa is related to the electrostatic free energy which is obtained by solving the Poisson–Boltzmann equation. Starting from the model pKa for a titrating residue, the method obtains the intrinsic pKa and then computes the protonation probability for a given pH including site–site interactions. This approach assumes that acid dissociation does not affect protein conformation aside from adding or deleting charges at titratable sites. In this work, we demonstrate our treecode-accelerated boundary integral (TABI) solver for the relevant electrostatic calculations. The pKa computing procedure is enclosed in a convenient Python wrapper which is publicly available at the corresponding author’s website. Predicted results are compared with experimental pKas for several proteins. Among ongoing efforts to improve protein pKa calculations, the advantage of TABI is that it reduces the numerical errors in the electrostatic calculations so that attention can be focused on modeling assumptions.


2018 ◽  
Vol 9 ◽  
pp. 216-223 ◽  
Author(s):  
Arnau Coll ◽  
Sandra Bermejo ◽  
David Hernández ◽  
Luís Castañer

The fabrication of high optical quality inverse opals is challenging, requiring large size, three-dimensional ordered layers of high dielectric constant ratio. In this article, alumina/TiO2–air inverse opals with a 98.2% reflectivity peak at 798 nm having an area of 2 cm2 and a thickness of 17 µm are achieved using a sacrificial self-assembled structure of large thickness, which was produced with minimum fabrication errors by means of an electrospray technique. Using alumina as the first supporting layer enables the deposition of TiO2 at a higher temperature, therefore providing better optical quality.


Sign in / Sign up

Export Citation Format

Share Document