scholarly journals Frictional Characteristics of the Newer Low-friction Elastomeric Ligatures

2016 ◽  
Vol 6 (1) ◽  
pp. 19-23
Author(s):  
Amol Mhatre ◽  
VK Ravindranath ◽  
Sachin Doshi ◽  
Girish Karandikar ◽  
PS Vivek
Keyword(s):  
Testing Machine ◽  
Frictional Resistance ◽  
Minimal Amount ◽  
New Delhi ◽  
Low Friction ◽  
Significant Difference ◽  
Group A ◽  
Group B ◽  
New Generation

ABSTRACT Aim The aim of this in vitro study was to investigate the efficiency of the new generation of elastomeric ligatures with innovative designs (SlideTM and AlastiKTM Easy-to-Tie) in reducing frictional resistance (FR) during sliding mechanics as compared with conventional ligatures. Materials and Methods Sixty ligature samples divided into four groups were used for the study. Group A: QuiK-StiK™ (3M Unitek, Monrovia, CA, USA), Group B: AlastiK™ Easy-to-Tie (3M Unitek, Monrovia, CA, USA), Group C: Slide™ (Leone, Firenze, Italy), and Group D: SS ligatures 0.010” (Libral Traders, New Delhi, India). Universal Testing Machine, Instron was used for measuring FR at the bracket-wire interface. Results There was statistically significant difference in FR among all the four groups of ligatures tested (p < 0.001). Slide ligatures produced the least amount of FR followed by SS ligatures, Easy-to-Tie, and QuiK-StiK in the increasing order of the FR values registered. Conclusion SlideTM ligatures may represent a valid alternative to passive self-ligating brackets when minimal amount of friction is desired. Angulation introduced into the elastomeric ligatures reduces the friction in comparison to conventional elastomeric ligatures. How to cite this article Vivek PS, Ravindranath VK, Karandikar G, Doshi S, Mhatre A, Sonawane M. Frictional Characteristics of the Newer Low-friction Elastomeric Ligatures. J Contemp Dent 2016;6(1):19-23.

scholarly journals Assessing Fracture Resistance of Restored Premolars with Novel Composite Materials: An In Vitro Study

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Zahraa Abdulaali Al-Ibraheemi ◽  
Huda Abbas Abdullah ◽  
Nada Abdlameer Jawad ◽  
Julfikar Haider
Keyword(s):  
Fracture Resistance ◽  
Testing Machine ◽  
In Vitro Study ◽  
Vitro Study ◽  
Resistance Testing ◽  
Significant Difference ◽  
Group A ◽  
Group B ◽  
Group D

During restorative treatment, premolars restored with resin filling materials using the conventional incremental-fill technique take longer restoration time and undermine the integrity of the tooth. The aim of this study was to assess fracture resistance of premolars restored by various types of novel bulk-fill composite resin materials. Forty-eight (n = 48) freshly extracted sound maxillary first premolars were used in this in vitro study. The teeth were divided into six groups, each having 8 specimens. Group A (positive control) was allocated for the intact teeth. For specimens in Groups B to F, a large cavity (Class-II MOD) was prepared with a standardized dimension of cavity (3 mm depth on the pulpal floor, 4 mm at the gingival seat, and 3 mm cavity width). Group B represented prepared teeth without any restoration. Group C, Group D, Group E, and Group F were restored with Tetric EvoCeram® incremental-fill (conventional), Beautifil bulk-fill, Filtek posterior bulk-fill, and SonicFill 2 bulk-fill restorative materials, respectively. All samples were finished and polished with an enhanced finishing kit and stored in distilled water for a month before the fracture resistance testing. All the samples were exposed to the axial loading (the speed of crosshead was 1 mm/min) in a computer-controlled universal testing machine (LARYEE, China) via a steel bar (6 mm in diameter) and the maximum applied force in Newton was recorded as the fracture resistance. One-way analysis of variance (SPSS 21) was used to compare the fracture resistance within the groups, and Tukey’s post hoc test was used to determine the difference between the groups. The lowest value of fracture resistance was recorded for Group B, and the highest value was recorded for Group A followed by the values of Group D, Group C, Group F, and Group E. One-way ANOVA revealed a statistically significant difference between the groups ( P < 0.05 ). Nonsignificant difference was found between the premolars restored by bulk-fill and conventional composites. Among the bulk-fill restored specimens, Beautifil restorative demonstrated significantly higher fracture resistance in comparison with the other two bulk-fill restored specimen groups (SonicFill 2 and Filtek). Bulk-fill composite such as Beautifil could be an alternative option to conventional incremental-fill composite for premolar restoration.

scholarly journals A study to evaluate and compare the expulsion and continuation rates of post placental insertion of Cu 375 and CuT 380A in Indian women at a premier hospital in New Delhi, India

2017 ◽  
Vol 6 (9) ◽  
pp. 3992 ◽  
Author(s):  
Mansi Kumar ◽  
Mahesh Kumar ◽  
Parul Aggarwal ◽  
Archna Gangania ◽  
Rupali Dewan
Keyword(s):  
Removal Rate ◽  
New Delhi ◽  
Contraceptive Device ◽  
Indian Women ◽  
Significant Difference ◽  
Group A ◽  
Post Placental ◽  
Group B ◽  
Continuation Rates

Background: The Study was planned to evaluate and compare the expulsion and continuation rates of post placental insertion of Cu 375 and CuT380A in Indian women at Safdarjung Hospital New Delhi, after approval was obtained from Institutional Ethical committee.Methods: Study group consisted of 300 women, divided into two groups: Group A and Group B. The data was analysed by using ‘student “t” test/ non-parametric ‘Wilcoxon Mann Whitney’ for quantitative variables to evaluate the safety, efficacy and acceptability.Results: Mean age was 24.99 years (range: 19-35years), All women were married (off which 64% literate) and Mean parity in group A was 1.97 and 2.06 in group B. Mean pain score during intrauterine contraceptive device (IUCD) insertion on visual analogue scale was 2.93 in group A and 3 in group B and was not statistically different. 84% women completed 12 months follow up in group A and 83.33% women in group B. Strings were visible in 74% women in group A and in 34% women in group B at 1 month of IUCD insertion. Visibility of strings increased in successive follow up visits and was visible in >80% of women at the end of one year in the both groups. String visibility after intra-Caesarean insertion was delayed. Fifty one percent (n=77) subjects in group A and 54% (n=81) in group B experienced amenorrhea up to six months. Menorrhagia was reported in 7.33% in group A and women 8.66% in group B at the end of 1 year of follow up. Pain was complained by 26 out of 150 (17.3%) women in group A as compared to 36 out of 150 (24%) women in group B after 1 month of insertion. There was no case of PID in group A whereas there were 3 cases of PID in group B. There was no perforation/trauma and pregnancy in either group.Conclusions: Overall expulsion rate was 13% and removal rate was 5% in our study. Continuation rate was 83.3% in Cu 375 and 80.6% in CuT380A at 12 months. There was no significant difference between the IUCDs regarding the safety, efficacy and complications such as expulsion, bleeding etc.

scholarly journals To Evaluate the Marginal Fit of Metal Copings Fabricated by Conventional Casting Procedure and Direct Metal Laser Sintering Technology – an In Vitro Study

2017 ◽  
Vol 05 (01) ◽  
pp. 039-046 ◽  
Author(s):  
Monica Sharma ◽  
Ajay Bansal ◽  
Sunny Panthi ◽  
Shefali Malik ◽  
Atulya Sharma
Keyword(s):  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Laser Sintering ◽  
Vitro Study ◽  
Direct Metal Laser Sintering ◽  
Marginal Fit ◽  
Significant Difference ◽  
Group A ◽  
Group B

Abstract Purpose: The purpose of this in vitro study was to evaluate marginal fit of cobalt- chromium (Co-Cr) copings fabricated by direct metal laser sintering system (DMLS) and conventional lost-wax technique (LW). Materials and method: Forty tooth preparations were carried out over extracted mandibular molars. They were divided into two groups A and B of 20 each. For group A Co-Cr copings were fabricated by direct metal laser sintering (DMLS) and for group B by lost wax technique (LW). Glass –ionomer cement (GIC) was used to tack the copings over their preparations. Marginal fit was then evaluated directly under the stereomicroscope. Results: The mean marginal gap of group A was 27.9 ± 2.4 μm and group B was 40.4 ±6 μm. Statistical analysis using t - test showed highly significant difference (P>.05) between the marginal mean of the DMLS (group A) compared to LW (group B). Conclusion: The DMLS copings demonstrated superior marginal fit compared to that of conventional Co-Cr casted copings.

scholarly journals Evaluation of the Effect of Water on Three Different Light Cured Composite Restorative Materials Stored in Water: An In Vitro Study

2012 ◽  
Vol 2012 ◽  
pp. 1-5 ◽  
Author(s):  
Basawaraj Biradar ◽  
Sudharani Biradar ◽  
Arvind MS
Keyword(s):  
Water Absorption ◽  
Physical And Mechanical Properties ◽  
In Vitro Study ◽  
Vitro Study ◽  
Weight Changes ◽  
Significant Difference ◽  
Restorative Materials ◽  
Group A ◽  
Group B

Objectives. The objective of this in vitro study was to investigate whether weight gain or loss in the three different composites occurs due to water absorption when they are stored in water.Methods. The composite restorative materials selected for this study included a microfine hybrid (Synergy) and two nanofilled composite restorative materials (Ceram X and Filtek Supreme Ultra). Twenty specimens of each material were fabricated of each composite material. Group A: Filtek Supreme Ultra, Group B: Synergy, Group C: Ceram X. Then all the specimens were stored in 10 ml Distilled water containing test tubes and placed in incubator at 37°C for six weeks. The weight changes of these specimens were measured daily for the first week and later once a week for next five weeks by using an electrical analytical balance.Results.The data was analyzed by one-way analysis of variance and Student'sttest. All groups showed maximum amount of water absorption in the first week than gradual decrease in the water absorption from the second to the sixth week, as compared to the first week and there is no statistically significant difference between the groups tested.Conclusion. All the composite restorative material absorbs some amount of water. The water absorption of the composite may decrease the physical and mechanical properties of the composites; hence it is necessary to consider the type of the material before starting the treatment.

Influence of prophylaxis on the microleakage of sealants: in vitro study

2002 ◽  
Vol 26 (4) ◽  
pp. 371-375 ◽  
Author(s):  
Ana Beatriz Alonso Chevitarese ◽  
Orlando Chevitarese ◽  
Ivete Pomarico Ribeiro de Souza ◽  
Roberto Braga de Carvalho Vianna
Keyword(s):  
Electron Microscope ◽  
Scanning Electron Microscope ◽  
In Vitro Study ◽  
Optical Microscope ◽  
Vitro Study ◽  
Significant Difference ◽  
Group A ◽  
Group B ◽  
Scanning Electron

The aim of this study was to evaluate the influence of prophylaxis on the sealants microleakage in 30 premolars divided into: Group A, Group B and Group C. The teeth were analyzed using the optical microscope (OM) and at scanning electron microscope (SEM). There was a statitical significant difference among the groups regarding the presence of microleakage, but not with the presence of tags.

Comparison of the long-term outcome of cemented Charnley low-friction arthroplasty with hybrid arthroplasty in patients with congenital hip disease

2019 ◽  
Vol 101-B (9) ◽  
pp. 1050-1057
Author(s):  
Kalliopi Lampropoulou-Adamidou ◽  
George Hartofilakidis
Keyword(s):  
Operating Time ◽  
Long Term Results ◽  
Low Friction ◽  
Term Outcome ◽  
Long Term Outcome ◽  
Significant Difference ◽  
Hip Disease ◽  
Group A ◽  
Group B

Aims To our knowledge, no study has compared the long-term results of cemented and hybrid total hip arthroplasty (THA) in patients with osteoarthritis (OA) secondary to congenital hip disease (CHD). This is a demanding procedure that may require special techniques and implants. Our aim was to compare the long-term outcome of cemented low-friction arthroplasty (LFA) and hybrid THA performed by one surgeon. Patients and Methods Between January 1989 and December 1997, 58 hips (44 patients; one man, 43 woman; mean age 56.6 years (25 to 77)) with OA secondary to CHD were treated with a cemented Charnley LFA (group A), and 55 hips (39 patients; two men, 37 women; mean age 49.1 years (27 to 70)) were treated with a hybrid THA (group B), by the senior author (GH). The clinical outcome and survivorship were compared. Results At all timepoints, group A hips had slightly better survivorship than those in group B without a statistically significant difference, except for the 24-year survival of acetabular components with revision for aseptic loosening as the endpoint, which was slightly worse. The survivorship was only significantly better in group A compared with group B when considering reoperation for any indication as the endpoint, 15 years postoperatively (74% vs 52%, p = 0.018). Conclusion We concluded that there was not a substantial difference at almost any time in the outcome of cemented Charnley LFAs compared with hybrid THAs when treating patients with OA of the hip secondary to CHD. We believe, however, that after improvements in the design of components used in hybrid THA, this could be the method of choice, as it is technically easier with a shorter operating time. Cite this article: Bone Joint J 2019;101-B:1050–1057.

scholarly journals Assessment of Exogenous Pigmentation on Clear Elastomeric Modules: An in vitro Study

2018 ◽  
Vol 8 (1) ◽  
pp. 33-36
Author(s):  
Shaista N Ansari ◽  
Dhananjay Rathod ◽  
G P Rathod ◽  
Gazal Bisht
Keyword(s):  
Methylene Blue ◽  
In Vitro Study ◽  
Vitro Study ◽  
Orthodontic Appliances ◽  
Significant Difference ◽  
Adobe Photoshop ◽  
Group A ◽  
Strong Staining ◽  
Group B

Objective: To assess in vitro changes in the shade of clear elastomeric modules from different manufacturers influenced by exogeneous pigmentation contained in everyday dietary substances.Materials & Method: The specimen comprised of clear elastomeric modules (Group A: Libral, Group B: TP Orthodontics) which were immersed in dietary substances: ketchup, coffee, tea, pepsi & methylene blue. Their hue, saturation and intensity were figured after 72 hours by methods of Adobe photoshop CS3 to mirror the module recoloring seriousness.Result: Significant difference was found between two types of modules analyzed in this study. Ketchup and methylene blue demonstrated higher staining potential compared to other staining media. Besides, there was no significant difference in staining contrast between tea and Pepsi.Conclusion: Ketchup and methylene blue are strong staining media, ought to be avoided by the patients opting for aesthetic orthodontic appliances. Elastomeric modules manufactured by different companies have differing staining potential. 

scholarly journals Evaluation and Comparison of Two Different Mouthwashes on Frictional Resistance Between Orthodontic Bracket and Archwire: An in Vitro Study

2019 ◽  
Vol 53 (2) ◽  
pp. 117-125
Author(s):  
Jayanti Choudhary ◽  
B Shashikumar ◽  
Anand K Patil
Keyword(s):  
Stainless Steel ◽  
Artificial Saliva ◽  
Steel Wire ◽  
Testing Machine ◽  
Frictional Resistance ◽  
Control Group ◽  
Tea Tree ◽  
Custom Made ◽  
Significant Difference

Aims: This study aimed to evaluate and compare the effect of tea tree oil (TTO) mouthwash and chlorhexidine (CHX) mouthwash on frictional resistance. Settings and Design: In vitro. Materials and Methods: In total, 60 extracted premolars were mounted on a custom-made acrylic fixture. These 60 premolars were randomly divided into 3 groups of 20 each, on which 0.022″ × 0.028″ slot MBT stainless steel brackets were bonded and 0.019″ × 0.025″ rectangular stainless steel wire was ligated with an elastomeric module. The 3 groups included a control group where the samples were immersed in artificial saliva and 2 experimental groups immersed in 0.2% CHX and TTO mouthwash, respectively, for 1.5 hours. Postimmersion static frictional resistance was evaluated on a universal testing machine at crosshead speed of 0.5 mm/min. Statistical Analysis Used: Tukey’s post hoc procedure. Results: This study showed a statistically significant difference in the frictional resistance between saliva and CHX groups and CHX and TTO groups ( P < .05). No statistically significant difference was observed between saliva and TTO groups ( P > .05). The frictional resistance was more in the CHX mouthwash group than in the TTO mouthwash group. Conclusions: Frictional resistance was lesser in the TTO mouthwash than in the CHX mouthwash. Based on this result, TTO mouthwash can be used instead of CHX mouthwash as an oral hygiene aid in patients with orthodontic treatments.

The Effect of Varying Ferrule Modes on Fracture Resistance of Canines Restored with One-Piece Milled Zirconia Post and Core

2012 ◽  
Vol 624 ◽  
pp. 98-102
Author(s):  
Yao Kun Zhang ◽  
Long Quan Shao ◽  
Ruo Yu Liu ◽  
Lin Lin Wang ◽  
Jun Ai ◽  
...  
Keyword(s):  
Fracture Resistance ◽  
In Vitro Study ◽  
Significant Difference ◽  
Zirconia Crowns ◽  
Group A ◽  
Post And Core ◽  
Resistance Decrease ◽  
Group B ◽  
Group D

The aim of this invitro study was to evaluate the fracture resistance of endodontically treated canines restored with one-piece milled zirconia post and core in the varying ferrule modes. Fifty recently extracted human maxillary canines were endodontically treated and randomly divided into 5 groups of 10 specimens each. According to the defect degree of ferrule, intact ferrule was classified as group A and served as control, 2 mm ferrule height without buccal ferrule was classified as group B, 2 mm ferrule height without mesial and buccal ferrule was classified as group C, 2 mm ferrule height without mesial, buccal and lingual ferrule was classified as group D, no ferrule preparation was classified as group E. All of the teeth were restored with one-piece milled zirconia post and core, and zirconia crowns. The teeth were prepared to standardized specifications. The restored teeth were loaded to fracture at a 135° angle to their long axis, at a cross-head speed 0.5 mm/min, and the load (N) at failure was recorded. Statistical analysis was performed by SNK pairwise multiple comparisons (α=0.05). The mean fracture resistance of five groups as follows: 1019.30±139.01N for group A, 861.20±105.67N for group B, 833.70±100.56N for group C, 733.20±96.91N for group D, 698.00±99.90N for group E. The fracture resistance of restored teeth between group B and group C, group D and group E had no statistically significant difference(P>0.05). The fracture resistance of the rest pairwise group comparisons had statistically significant difference(P<0.05). Increasing the absence degree of ferrule, it was found that the fracture resistance decrease. The buccal and lingual ferrule were more important than mesial ferrule for enhanced fracture resistance. This in vitro study supports evidence that reserving the buccal and lingual ferrule is a key point to increase the fracture resistance of canines restored with one-piece milled zirconia post and core.

scholarly journals Effect of hysteroscopic examination on the outcome of in vitro fertilization

2011 ◽  
Vol 68 (6) ◽  
pp. 476-480 ◽  
Author(s):  
Aleksandra Trninic-Pjevic ◽  
Vesna Kopitovic ◽  
Sonja Pop-Trajkovic ◽  
Artur Bjelica ◽  
Irena Bujas ◽  
...  
Keyword(s):  
Embryo Transfer ◽  
Uterine Cavity ◽  
Transvaginal Sonography ◽  
Vitro Fertilization ◽  
Significant Difference ◽  
Pregnancy And Delivery ◽  
Group A ◽  
Group B ◽  
Ivf Et

Bacground/Aim. Implantation failure after embryo transfer is one of the main problems of in vitro fartilization (IVF) and intrauterine pathologies can lead to unsuccessful outcome. The aim of this study was to determine if hysteroscopic examination of uterine cavity and consequent treatment of intrauterine lesions prior to IVF could improve the pregnancy rate in women under 38. Methods. This study included 480 patients under 38, who had undergone IVF or IVF\ICSI - embryo transfer cycles, in which one or more good quality embryos were transferred. By transvaginal sonography performed within the past 2 months, the uterus was found normal in all the patients enrolled in our IVF unit. The patients were divided into three groups: group A - with no hysteroscopic evaluation and no pathology, group B - with hysteroscopy but no pathology, and group C - with abnormal hysteroscopy finding and corresponding treatment. Results. The obtained results revaled no difference in the mean age, duration of infertility, number of mature oocytes in either group (p > 0.05). Clinical pregnancy rates in the groups A, B and C were 36.9%, 58.75% and 32.7%, respectively, and delivery rates were 27.5%, 48.7% and 25.7%, respectively. There was a statistically significant difference among the groups concerning pregnancy and delivery rates. Conclusion. Considering the results of this study we could conclude that hysteroscopy, as a routine examination, should be performed before the first IVF-ET cycle in all patients thereby reducing the failures and then the costs of IVF-ET.

Sign in / Sign up

Export Citation Format

Share Document