scholarly journals Crustal Structure of the Trench-Island Arc-Back-arc Sea System from the Nankai Trough to the Northern Margin of the Yamato Basin, Southwest Japan

2010 ◽  
Vol 119 (2) ◽  
pp. 235-244 ◽  
Author(s):  
Tanio ITO ◽  
Hiroshi SATO
Keyword(s):  
Crustal Structure ◽  
Nankai Trough ◽  
Island Arc ◽  
Southwest Japan ◽  
Northern Margin ◽  
Yamato Basin ◽  
Back Arc

Composition, structure and tectonic analysis of the Shangrimuce arc-continent collision zone on the northern margin of the Central Qilian, NW China

2021 ◽  
Author(s):  
Hongyuan Zhang ◽  
Zhibin Lei ◽  
Bo Yang ◽  
Qing Liu ◽  
Haijun Zhang ◽  
...  
Keyword(s):  
Shear Zones ◽  
Oceanic Lithosphere ◽  
Late Ordovician ◽  
Island Arc ◽  
Qilian Mountain ◽  
Northern Margin ◽  
Early Ordovician ◽  
Collision Zone ◽  
Two Stages ◽  
Back Arc

<p>A 1:50000 regional survey, covering an area of about 2000 km<sup>2</sup>, was carried out in the Shangrimuce area of Qilian Mountain in Northwest China. The results show that during Caledonian, the northern margin of the Central Qilian block experienced collision with mature island arcs and subsequently northward expansion. In the Shangrimuce study area, five geological units have been identified; they are, form south to north, back-arc basin, early Ordovician island arc, inter arc basin, middle Late Ordovician island arc, and fore-arc and oceanic lithosphere amalgamation zone. </p><p>(1) back-arc basin. In the Yangyuchi- Shule River- Cuorigang- Wawusi area, there may be a back-arc spreading basin, and there should be spreading basins in this area. It is speculated that there was a northward reverse subduction in the late Ordovician, accompanied by a syenite body, a broad spectrum dyke swarms and an accretionary wedge zone in the whole area.</p><p>(2) early Ordovician island arc. In the Shangrimuce-Dander area, the Proterozoic basement granitic gneiss, the early Ordovician island arc block and the high-pressure geological body all occur in the form of thrust horses, forming a double metamorphic belt, which reveals the existence of ocean subduction to south in the early Ordovician. </p><p>(3) inter arc basin. On both banks of Tuolai River to the east of Yanglong Township, there are early Middle Ordovician inter-arc basins with oceanic crust. </p><p>(4) middle Late Ordovician island arc. To the north of Tuolai River, there is a middle Late Ordovician island arc belt. Both sides of the island arc zone experienced strong ductile shear deformation, which recorded a complex arc-continent collision. </p><p>(5) fore-arc and oceanic lithosphere amalgamation zone (Fig.1). The Yushigou area has developed a fore-arc and oceanic lithospheric amalgamation zone, with weakly deformed fore-arc flysch basin, strongly deformed siliceous rocks, pillow Basalt, diabase, gabbro, peridotite and other rock assemblages.</p><p>Combined with the characteristics of arc-continent collision zone in the Western Pacific, there are two stages of shear zone series (Fig.2). One is ductile shear zones formed by the South dipping gneissic belt, revealing the existence of oceanic subduction accretion wedge and emplacement of high-pressure rocks. Another superimposed one is north dipping. This indicates that the arc-continent collision caused by back-arc reverse subduction, which ultimately controls the overall geometric and kinematic characteristics of the shear zones in the region.</p><p><img src="https://contentmanager.copernicus.org/fileStorageProxy.php?f=gepj.8219836ca50067454890161/sdaolpUECMynit/12UGE&app=m&a=0&c=40b3389c641f2d0ca723e1527c32927e&ct=x&pn=gepj.elif&d=1" alt=""></p><p>Figure 1 United sections showing a Caledonian trench-arc system in the Qilian Mountain, NW China.</p><p><img src="https://contentmanager.copernicus.org/fileStorageProxy.php?f=gepj.8def566da50066084890161/sdaolpUECMynit/12UGE&app=m&a=0&c=e82258ecc235c4e618abd6c035b58232&ct=x&pn=gepj.elif&d=1" alt=""></p><p>Figure 2 Structural analysis at Hongyahuo, indicating two stages of deformation.</p><p>The research has been supported by projects from the Ministry of Land and Resources (No.201211024-04; 1212011121188) and the 2020 undergraduate class construction project from China University of Geosciences (Beijing) (No. HHSKE202003).</p><p> </p>

scholarly journals Crustal Evolution of a Paleozoic Intra-oceanic Island-Arc-Back-Arc Basin System Constrained by the Geochemistry and Geochronology of the Yakuno Ophiolite, Southwest Japan

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Yoshimitsu Suda ◽  
Yasutaka Hayasaka ◽  
Kosuke Kimura
Keyword(s):  
East Asian ◽  
Oceanic Island ◽  
Island Arc ◽  
Geochemical Data ◽  
Southwest Japan ◽  
Asian Continent ◽  
Initial Stage ◽  
Back Arc ◽  
Shrimp Zircon ◽  
Analytical Errors

The Yakuno ophiolite in southwest Japan is considered to have been obducted by the collision between an intra-oceanic island-arc-back-arc basin (intra-OIA-BAB) system and the East Asian continent during the late Paleozoic. New SIMS (SHRIMP) zircon U-Pb determinations for amphibolite and metagabbro of BAB origin within the Yakuno ophiolite yield ages of 293.4 ± 9.5 Ma and 288 ± 13 Ma, respectively. These ages are slightly older (however, overlapping within analytical errors) than the magmatic age of arc granitoids (ca. 285–282 Ma) that intruded into the mafic rocks of BAB origin. Results from geochronological and geochemical data of the Yakuno ophiolite give rise to the following tentative geotectonic model for the Paleozoic intra-OIA-BAB system: the initial stage of BAB rifting (ca. 293–288 Ma) formed the BAB crust with island-arc basalt (IAB) signatures, which was brought to the OIA setting, and generated the arc granitoids (ca. 285–282 Ma) by anatexis of the BAB crust. A later stage of BAB rifting (<ca. 285 Ma) formed the BAB crust with IAB to MORB signatures, on which the Permian sediments were conformably deposited. These components collided with the eastern margin of the East Asian continent during the early Mesozoic.

scholarly journals Driving stress and seismotectonic implications of the 2013 Mw5.8 Awaji Island earthquake, southwestern Japan, based on earthquake focal mechanisms before and after the mainshock

2020 ◽  
Vol 72 (1) ◽  
Author(s):  
Kazutoshi Imanishi ◽  
Makiko Ohtani ◽  
Takahiko Uchide
Keyword(s):  
Stress Field ◽  
Stress Tensor ◽  
Nankai Trough ◽  
Source Region ◽  
Local Scale ◽  
Southwest Japan ◽  
Stress Tensor Inversion ◽  
Earthquake Fault ◽  
Reverse Faulting ◽  
Before And After

Abstract A driving stress of the Mw5.8 reverse-faulting Awaji Island earthquake (2013), southwest Japan, was investigated using focal mechanism solutions of earthquakes before and after the mainshock. The seismic records from regional high-sensitivity seismic stations were used. Further, the stress tensor inversion method was applied to infer the stress fields in the source region. The results of the stress tensor inversion and the slip tendency analysis revealed that the stress field within the source region deviates from the surrounding area, in which the stress field locally contains a reverse-faulting component with ENE–WSW compression. This local fluctuation in the stress field is key to producing reverse-faulting earthquakes. The existing knowledge on regional-scale stress (tens to hundreds of km) cannot predict the occurrence of the Awaji Island earthquake, emphasizing the importance of estimating local-scale (< tens of km) stress information. It is possible that the local-scale stress heterogeneity has been formed by local tectonic movement, i.e., the formation of flexures in combination with recurring deep aseismic slips. The coseismic Coulomb stress change, induced by the disastrous 1995 Mw6.9 Kobe earthquake, increased along the fault plane of the Awaji Island earthquake; however, the postseismic stress change was negative. We concluded that the gradual stress build-up, due to the interseismic plate locking along the Nankai trough, overcame the postseismic stress reduction in a few years, pushing the Awaji Island earthquake fault over its failure threshold in 2013. The observation that the earthquake occurred in response to the interseismic plate locking has an important implication in terms of seismotectonics in southwest Japan, facilitating further research on the causal relationship between the inland earthquake activity and the Nankai trough earthquake. Furthermore, this study highlighted that the dataset before the mainshock may not have sufficient information to reflect the stress field in the source region due to the lack of earthquakes in that region. This is because the earthquake fault is generally locked prior to the mainshock. Further research is needed for estimating the stress field in the vicinity of an earthquake fault via seismicity before the mainshock alone.

Proterozoic stratigraphy and tectonic framework of China

1984 ◽  
Vol 121 (6) ◽  
pp. 599-614 ◽  
Author(s):  
Wang Hongzhen ◽  
Qiao Xiufu
Keyword(s):  
Continental Margin ◽  
North China ◽  
Island Arc ◽  
Northern Margin ◽  
Late Proterozoic ◽  
The North ◽  
Southern Margin ◽  
Platform Margin ◽  
Sketch Map ◽  
Middle Proterozoic

AbstractThe time span of the Proterozoic is taken as from 2600 to 600 Ma with subdivision boundaries at 1850 and 1050 Ma respectively, as 2600 Ma seems more appropriate for the initial Proterozoic in China, Siberia and parts of Gondwanaland, and 600 Ma is an inferred age of the Precambrian–Cambrian boundary based on recent study of the Yangtze Gorge section. The Proterozoic of China includes the Lower Proterozoic Wutaian and Hutuo-an, the Middle Proterozoic Changchengian and Jixianian and the Upper Proterozoic Qingbaikou-an and Sinian.Based mainly on tectono-sedimentary types and associations, seven stratigraphic super-regions are recognized in the Proterozoic of China and stratigraphic successions of various representative regions are shown in two tables, one for the Sinian and another for the Pre-Sinian Proterozoic. Palaeogeographic outline of the main super-regions and chronometric limit of the principal stratigraphic units are briefly discussed. Three types of stable Sinian successions are distinguished, the Yangtze type, the Quruktagh type and the Jiaoliao type, which are correlated mainly on the basis of tillite horizons and of sabelliditids and the Ediacara type of fossils. Semi-stable and mobile types of Sinian deposits in Southeast China are also briefly mentioned.The Proterozoic tectonic units of China and the nature of their boundaries are shown on a sketch map showing basement structures. Crustal sectors of continental nature are designated as continental tectonic domains, while broad and complicated crustal sectors of mainly transitional and partly oceanic nature may be called continental margin tectonic domains. The boundaries between these domains are usually the principal crustal consumption zones. On this basis, three continental domains, the North China, the South China and the Southern (Gondwana), and two continental margin domains, the Northern (Siberian–Mongolian) and the East China, are distinguished. Platforms, continental nuclei, massifs and uplifts are used to denote subdivisions within the tectonic domains. The development of aulacogens is an outstanding feature in the continental domains, especially in the Middle Proterozoic. Aulacogens may be classified into an intra-platform type and a platform margin type. Early Proterozoic aulacogens are usually brachy-axial and intermittent, and show conspicuous deformation at closure, much like a geosyncline. Thirteen aulacogens of different types are shown on the sketch map.The boundary nature of continental domains is analysed in terms of island arcs and marginal seas, and also of emplacement of granite rocks in border parts. The North China Domain was basically consolidated at around 1850 Ma and has a passive northern margin stretching from Nei Mongol to Central Tianshan, but the southern margin was active and was twice subducted by the Qinling marine realm at 1700 and 1000 Ma approximately. The Yangtze Platform was not completely consolidated until 1050 Ma BP but has a core older than 1850 Ma. A broad continental margin terrain had developed in the Jiangnan region and farther to the southeast in the Middle and Late Proterozoic. At least two island arc belts with interarc basins, an inner Fanjingshan and an outer Sibao, may be discerned in the Middle Proterozoic, and a Late Proterozoic island arc zone over 1000 km in length was developed along the southern margin of the Jiangnan Uplift, represented by the Banxi Group and equivalent strata. This kind of broad complicated continental margin tract which has a long development history may be called the open type or the West Pacific type.

Subduction-related magmatic imprint of most Philippine ophiolites: implications on the early geodynamic evolution of the Philippine archipelago

2004 ◽  
Vol 175 (5) ◽  
pp. 443-460 ◽  
Author(s):  
Rodolfo A. Tamayo* ◽  
René C. Maury* ◽  
Graciano P. Yumul ◽  
Mireille Polvé ◽  
Joseph Cotten ◽  
...  
Keyword(s):  
Partial Melting ◽  
Subduction Zone ◽  
Volcanic Rocks ◽  
The Philippines ◽  
Island Arc ◽  
Island Arcs ◽  
Geodynamic Evolution ◽  
Wide Range ◽  
Opening And Closing ◽  
Back Arc

Abstract The basement complexes of the Philippine archipelago include at least 20 ophiolites and ophiolitic complexes. These complexes are characterised by volcanic sequences displaying geochemical compositions similar to those observed in MORB, transitional MORB-island arc tholeiites and arc volcanic rocks originating from modern Pacific-type oceans, back-arc basins and island arcs. Ocean island basalt-like rocks are rarely encountered in the volcanic sequences. The gabbros from the ophiolites contain clinopyroxenes and plagioclases showing a wide range of XMg and An values, respectively. Some of these gabbros exhibit mineral chemistries suggesting their derivation from basaltic liquids formed from mantle sources that underwent either high degrees of partial melting or several partial melting episodes. Moreover, some of the gabbros display a crystallization sequence where orthopyroxene and clinopyroxene appeared before plagioclase. The major element compositions of coexisting orthopyroxenes and olivines from the mantle peridotites are consistent with low to high degrees of partial melting. Accessory spinels in these peridotites display a wide range of XCr values as well with some of them above the empirical upper limit of 0.6 often observed in most modern mid-oceanic ridge (MOR) mantle rocks. Co-existing olivines and spinels from the peridotites also exhibit compositions suggesting that they lastly equilibrated under oxidizing mantle conditions. The juxtaposition of volcanic rocks showing affinities with modern MOR and island arc environments suggests that most of the volcanic sequences in Philippine ophiolites formed in subduction-related geodynamic settings. Similarly, their associated gabbros and peridotites display mineralogical characteristics and mineral chemistries consistent with their derivation from modern supra-subduction zone-like environments. Alternatively, these rocks could have, in part, evolved in a supra-subduction zone even though they originated from a MOR-like setting. A simplified scenario regarding the early geodynamic evolution of the Philippines is proposed on the basis of the geochemical signatures of the ophiolites, their ages of formation and the ages and origins of the oceanic basins actually bounding the archipelago, including basins presumed to be now totally consumed. This scenario envisages the early development of the archipelago to be largely dominated by the opening and closing of oceanic basins. Fragments of these basins provided the substratum on top of which the Cretaceous to Recent volcanic arcs of the Philippines were emplaced.

Geology, petrology and tectonomagmatic evolution of the plutonic crustal rocks of the Sabzevar ophiolite, NE Iran

2013 ◽  
Vol 150 (5) ◽  
pp. 862-884 ◽  
Author(s):  
MORTEZA KHALATBARI JAFARI ◽  
HASSAN A. BABAIE ◽  
MOJTABA MIRZAIE
Keyword(s):  
Subduction Zone ◽  
Subduction Zones ◽  
Island Arc ◽  
Magma Chambers ◽  
Northern Margin ◽  
Crustal Rocks ◽  
Microscopic Studies ◽  
Element Enrichment ◽  
Spider Diagrams ◽  
Ocean Ridge

AbstractThe plutonic crustal sequence exposed northeast of Sabzevar is part of the ophiolitic belt of Sabzevar that occurs along the northern margin of the Central Iran micro-continent. The sequence includes olivine and pyroxene gabbro with cumulate characteristics, isotropic gabbro, foliated gabbro and a diabase sheeted dyke complex cut by wehrlite and olivine websterite intrusions, and pegmatite gabbro and plagiogranite as small intrusions and dykes. The sequence is comparable to gabbros in known ophiolite complexes. Microscopic studies show an abundance of the mesocumulate and heteradcumulate textures that represent open system magma chambers, which are common in supra-subduction zones. The olivine → plagioclase → clinopyroxene → ± orthopyroxene → amphibole trend of mineralization in the gabbros, similar to mid-ocean ridge basalt (MORB), and olivine → clinopyroxene → ± orthopyroxene → plagioclase → amphibole, similar to arc rocks, indicate the diversity in the formation of these rocks, and represent petrographic evidence of their formation in a supra-subduction zone. The rocks have calc-alkaline to tholeiitic affinities, and niobium depletion in the spider diagrams of diabase that matches the patterns of island arc magma. These patterns, and the light rare earth element enrichment of the diabase and plagiogranite, suggest the effect and introduction of the fluids, originating from the subducting slab, beneath the mantle wedge. The low titanium compositions, matching those of arc diabase and plagiogranite, plot in the island arc to MORB tectonomagmatic fields, and suggest formation of the Sabzevar ophiolitic plutonic crustal sequence in a supra-subduction zone during Late Cretaceous time.

Sign in / Sign up

Export Citation Format

Share Document