scholarly journals A Study on the Vibrational Reduction Evaluation and the Relative Displacement in the External Vibration of Precision Measuring System

2012 ◽  
Vol 588-589 ◽  
pp. 1103-1107
Author(s):  
Yu Hai Gu ◽  
Qiu Shi Han ◽  
Xiao Li Xu ◽  
Hai Tao Zhang

In order to improve accuracy of measuring motor speed in precision motor control systems, a method of precise measurement of speed with CPLD is proposed, which measures the truncated parts of the measured pulse on the basis of measuring raster count pulse within the equal period, and takes them as compensation, thus improving accuracy of measuring the raster pulse. In this paper, a speed measuring formula is given. Measuring system is provided with parallel and serial communication interfaces for output of measurement results.


2014 ◽  
Vol 615 ◽  
pp. 57-62 ◽  
Author(s):  
Raquel Acero Cacho ◽  
Jose Antonio Albajez ◽  
José Antonio Yagüe-Fabra ◽  
Marta Torralba ◽  
Margarita Valenzuela ◽  
...  

The nanotechnology field has been developing strongly in recent years and ultra-precision measuring systems are nowadays required. A new two-dimensional moving platform with 50x50 mm range of travel, nanometer resolution and sub micrometer accuracy is being designed by the authors in order to be integrated with an Atomic Force Microscope (AFM). In this work the definition, design and experimental characterization of a homing sensor system for this 2D moving platform is presented. The homing sensor system will allow the generation of an absolute 2D reference for the platform (X-Y axis and θz rotation), defining an initial cero for the measuring system, which is based on laser encoders.


2011 ◽  
Vol 383-390 ◽  
pp. 5300-5303
Author(s):  
Wei Liu ◽  
Xiao Jie Song ◽  
Wen Gang Chen

It’s very difficult to get high precision measuring result using contact torquemeter because of very low signal-to-noise ratio. To overcome this defect, a wireless torque measuring system is designed based on CC2500. This system uses strain gauge torque sensor to measure the surface principal stress of the transmission shaft, and get the maximum shearing stress, and then the torque that the transmission shaft bears. The weak output signal of torque sensor is magnified by the instrumentation amplifier AD623, and sent to the analog-to-digital convertor. These digital data are transmited to the portable receiving terminal by the wireless transceiver chip CC2500. The dynamic wireless torque measurement is realized by this system.


2010 ◽  
Vol 44-47 ◽  
pp. 724-727
Author(s):  
Xing Guang Li ◽  
Gui Ying Li ◽  
Shuang Zhao

According to optical triangle theory, by detecting the position of reflection light spot on line array CCD. The pels signal is transformed into data flow by a high speed ADC for processing with the circuit composed of FPGA. The system can calculate the relative displacement between the reference point and the objects detected. The system has 50MHz sampling rate and USB2.0 bus, so it also can be applied in other information acquisition fields.


2012 ◽  
Vol 433-440 ◽  
pp. 2619-2622
Author(s):  
Wei Liu ◽  
Xiao Jie Song ◽  
Wen Gang Chen

It’s very difficult to get high precision measuring result using contact torquemeter because of very low signal-to-noise ratio. To overcome this defect, a wireless torque measuring system is designed based on CC2500. This system uses strain gauge torque sensor to measure the surface principal stress of the transmission shaft, and get the maximum shearing stress, and then the torque that the transmission shaft bears. The weak output signal of torque sensor is magnified by the instrumentation amplifier AD623, and sent to the analog-to-digital convertor. These digital data are transmited to the portable receiving terminal by the wireless transceiver chip CC2500. The dynamic wireless torque measurement is realized by this system.


2020 ◽  
Vol 868 ◽  
pp. 180-188
Author(s):  
Miroslav Vokáč ◽  
Lukáš Balík ◽  
Petr Bouška

Internet of Thing technology (IoT) is currently developed and IoT commercial networks are being operated and developed in the Czech Republic, as for example LoRa or SigFox. In order to monitor structures or environments (temperature or relative air humidity etc.) with use of these technologies, very cheap hardware can be used, as is the micro controller ESP32 (or its precursor ESP8266). More substantial part of costs represents programming and adjustment for the actual measurement. This article is containing pilot verification of the measuring system based on the above technology during the monitoring of relative displacements in cracks and temperatures of environment on the building structure of cultural monument Church of St. Martin in Zlatá Olešnice. We applied the measurement with sensors of displacement across cracks of the masonry structure in combination with the measurement of the air temperature. The measurement of some cracks proved that the relative displacement is significantly independent on the temperature and, therefore, the displacement is most likely influenced by the unstable conditions in the subsoil of the structure, which is also greatly affected by a ground moisture.


2016 ◽  
Vol 45 (3) ◽  
pp. 312002
Author(s):  
蒋鑫 JIANG Xin ◽  
李华 LI Hua ◽  
朱辉 ZHU Hui ◽  
刘杰 LIU Jie

2009 ◽  
Vol 416 ◽  
pp. 71-76 ◽  
Author(s):  
Zhen Zhong Wang ◽  
Yin Biao Guo ◽  
Jiang Guo ◽  
Qiao Xu

In precision measurement, the existed error of measuring system influences surface accuracy more. This paper provides an error analysis focusing on the research effort on aspheric lens on-machine measurement for form accuracy. And the error parameters including positioning error of coordinate origin, tilt angle and radius error of probe head are investigated. It was known that it was quite difficult to obtain the parameters by detecting instruments, so the method of error separation and correction based on measuring standard parts is presented in this paper to guide the inverse solution for higher measuring accuracy. Also, a measuring experiment with Φ210mm lens is executed. Experimental results indicate that the method based on standard parts is suitable for on-machine precision measuring of aspheric lens.


Sign in / Sign up

Export Citation Format

Share Document