scholarly journals Global risk of radioactive fallout after nuclear reactor accidents

2011 ◽  
Vol 11 (11) ◽  
pp. 31207-31230 ◽  
Author(s):  
J. Lelieveld ◽  
D. Kunkel ◽  
M. G. Lawrence
Keyword(s):  
Radioactive Contamination ◽  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
Nuclear Reactor ◽  
Atmospheric Dispersion ◽  
Reactor Core ◽  
Global Risk ◽  
Exposure Risks ◽  
Phase Out

Abstract. Reactor core meltdowns of nuclear power plants are rare, yet the consequences are catastrophic. But what is meant by "rare"? And what can be learned from the Chernobyl and Fukushima incidents? Here we assess the risk of exposure to radioactivity due to atmospheric dispersion of gases and particles following severe nuclear accidents, using particulate 137Cs and gaseous 131I as proxies for the fallout. It appears that previously the occurrence of major accidents and the risks of radioactive contamination have been underestimated. Using a global model of the atmosphere we compute that on average, in the event of a core melt of any nuclear power plant worldwide, more than 90% of emitted 137Cs would be transported beyond 50km and about 50% beyond 1000 km distance. This corroborates that such accidents have large-scale and trans-boundary impacts. Although the emission strengths and atmospheric removal processes of 137Cs and 131I are quite different, the radioactive contamination patterns over land and the human deposition exposure are computed to be similar. High human exposure risks occur around reactors in densely populated regions, notably in southern Asia where a core melt can subject 55 million people to radioactive contamination. The recent decision by Germany to phase out its nuclear reactors will reduce the national risk, though a large risk will still remain from the reactors in neighbouring countries.

scholarly journals Global risk of radioactive fallout after major nuclear reactor accidents

2012 ◽  
Vol 12 (9) ◽  
pp. 4245-4258 ◽  
Author(s):  
J. Lelieveld ◽  
D. Kunkel ◽  
M. G. Lawrence
Keyword(s):  
Radioactive Contamination ◽  
Human Exposure ◽  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
Atmospheric Dispersion ◽  
Global Risk ◽  
Reactor Accident ◽  
Event Scale ◽  
Reactor Accidents

Abstract. Major reactor accidents of nuclear power plants are rare, yet the consequences are catastrophic. But what is meant by "rare"? And what can be learned from the Chernobyl and Fukushima incidents? Here we assess the cumulative, global risk of exposure to radioactivity due to atmospheric dispersion of gases and particles following severe nuclear accidents (the most severe ones on the International Nuclear Event Scale, INES 7), using particulate 137Cs and gaseous 131I as proxies for the fallout. Our results indicate that previously the occurrence of INES 7 major accidents and the risks of radioactive contamination have been underestimated. Using a global model of the atmosphere we compute that on average, in the event of a major reactor accident of any nuclear power plant worldwide, more than 90% of emitted 137Cs would be transported beyond 50 km and about 50% beyond 1000 km distance before being deposited. This corroborates that such accidents have large-scale and trans-boundary impacts. Although the emission strengths and atmospheric removal processes of 137Cs and 131I are quite different, the radioactive contamination patterns over land and the human exposure due to deposition are computed to be similar. High human exposure risks occur around reactors in densely populated regions, notably in West Europe and South Asia, where a major reactor accident can subject around 30 million people to radioactive contamination. The recent decision by Germany to phase out its nuclear reactors will reduce the national risk, though a large risk will still remain from the reactors in neighbouring countries.

The analysis of emergency situations related to fires at nuclear power plants

2021 ◽  
Vol 30 (5) ◽  
pp. 66-75
Author(s):  
S. A. Titov ◽  
N. M. Barbin ◽  
A. M. Kobelev
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Emergency Situations ◽  
The Usa ◽  
Large Fires ◽  
Short Circuits ◽  
Nuclear Reactor Core

Introduction. The article provides a system and statistical analysis of emergency situations associated with fires at nuclear power plants (NPPs) in various countries of the world for the period from 1955 to 2019. The countries, where fires occurred at nuclear power plants, were identified (the USA, Great Britain, Switzerland, the USSR, Germany, Spain, Japan, Russia, India and France). Facilities, exposed to fires, are identified; causes of fires are indicated. The types of reactors where accidents and incidents, accompanied by large fires, have been determined.The analysis of major emergency situations at nuclear power plants accompanied by large fires. During the period from 1955 to 2019, 27 large fires were registered at nuclear power plants in 10 countries. The largest number of major fires was registered in 1984 (three fires), all of them occurred in the USSR. Most frequently, emergency situations occurred at transformers and cable channels — 40 %, nuclear reactor core — 15 %, reactor turbine — 11 %, reactor vessel — 7 %, steam pipeline systems, cooling towers — 7 %. The main causes of fires were technical malfunctions — 33 %, fires caused by the personnel — 30 %, fires due to short circuits — 18 %, due to natural disasters (natural conditions) — 15 % and unknown reasons — 4 %. A greater number of fires were registered at RBMK — 6, VVER — 5, BWR — 3, and PWR — 3 reactors.Conclusions. Having analyzed accidents, involving large fires at nuclear power plants during the period from 1955 to 2019, we come to the conclusion that the largest number of large fires was registered in the USSR. Nonetheless, to ensure safety at all stages of the life cycle of a nuclear power plant, it is necessary to apply such measures that would prevent the occurrence of severe fires and ensure the protection of personnel and the general public from the effects of a radiation accident.

A High Effective Parallel Method for the Coupling Between Neutronics and Thermal-Hydraulic

2016 ◽  
Author(s):  
Xiaomeng Dong ◽  
Zhijian Zhang ◽  
Zhaofei Tian ◽  
Lei Li ◽  
Guangliang Chen
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Power ◽  
Large Scale ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Decisive Role ◽  
Reactor Power ◽  
Coupling Method ◽  
Outlet Temperature

Multi-physics coupling analysis is one of the most important fields among the analysis of nuclear power plant. The basis of multi-physics coupling is the coupling between neutronics and thermal-hydraulic because it plays a decisive role in the computation of reactor power, outlet temperature of the reactor core and pressure of vessel, which determines the economy and security of the nuclear power plant. This paper develops a coupling method which uses OPENFOAM and the REMARK code. OPENFOAM is a 3-dimension CFD open-source code for thermal-hydraulic, and the REMARK code (produced by GSE Systems) is a real-time simulation multi-group core model for neutronics while it solves diffusion equations. Additionally, a coupled computation using these two codes is new and has not been done. The method is tested and verified using data of the QINSHAN Phase II typical nuclear reactor which will have 16 × 121 elements. The coupled code has been modified to adapt unlimited CPUs after parallelization. With the further development and additional testing, this coupling method has the potential to extend to a more large-scale and accurate computation.

scholarly journals Assessment of water hammer effects on boiling water nuclear reactor core dynamics

2007 ◽  
Vol 22 (1) ◽  
pp. 18-33 ◽  
Author(s):  
Anis Bousbia-Salah
Keyword(s):  
Pressure Wave ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Water Hammer ◽  
Pressure Wave Amplitude ◽  
Sensitivity Studies ◽  
Rapid Transients ◽  
Complex Phenomena

Complex phenomena, as water hammer transients, occurring in nuclear power plants are still not very well investigated by the current best estimate computational tools. Within this frame work, a rapid positive reactivity addition into the core generated by a water hammer transient is considered. The numerical simulation of such phenomena was carried out using the coupled RELAP5/PARCS code. An over all data comparison shows good agreement between the calculated and measured core pressure wave trends. However, the predicted power response during the excursion phase did not correctly match the experimental tendency. Because of this, sensitivity studies have been carried out in order to identify the most influential parameters that govern the dynamics of the power excursion. After investigating the pressure wave amplitude and the void feed back responses, it was found that the disagreement between the calculated and measured data occurs mainly due to the RELAP5 low void condensation rate which seems to be questionable during rapid transients. .

A Nodal Dynamic Model for Control System Simulation of the HTR-PM Reactor Core

2010 ◽  
Author(s):  
Zhe Dong ◽  
Xiaojin Huang ◽  
Liangju Zhang
Keyword(s):  
Control System ◽  
High Temperature ◽  
Power Distribution ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Pebble Bed ◽  
Nodal Model ◽  
High Temperature Gas

The modular high-temperature gas-cooled nuclear reactor (MHTGR) is seen as one of the best candidates for the next generation of nuclear power plants. China began to research the MHTGR technology at the end of the 1970s, and a 10 MWth pebble-bed high temperature reactor HTR-10 has been built. On the basis of the design and operation of the HTR-10, the high temperature gas-cooled reactor pebble-bed module (HTR-PM) project is proposed. One of the main differences between the HTR-PM and HTR-10 is that the ratio of height to diameter corresponding to the core of the HTR-PM is much larger than that of the HTR-10. Therefore it is not proper to use the point kinetics based model for control system design and verification. Motivated by this, a nodal neutron kinetics model for the HTR-PM is derived, and the corresponding nodal thermal-hydraulic model is also established. This newly developed nodal model can reflect not only the total or average information but also the distribution information such as the power distribution as well. Numerical simulation results show that the static precision of the new core model is satisfactory, and the trend of the transient responses is consistent with physical rules.

scholarly journals Global risk from the atmospheric dispersion of radionuclides by nuclear power plant accidents in the coming decades

2013 ◽  
Vol 13 (11) ◽  
pp. 30287-30309 ◽  
Author(s):  
T. Christoudias ◽  
Y. Proestos ◽  
J. Lelieveld
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
General Circulation ◽  
Nuclear Power ◽  
Power Plants ◽  
Atmospheric Dispersion ◽  
Circulation Model ◽  
Global Risk ◽  
The Usa ◽  
Under Construction

Abstract. We estimate the global risk from the release and atmospheric dispersion of radionuclides from nuclear power plant accidents using the EMAC atmospheric chemistry–general circulation model. We included all nuclear reactors that are currently operational, under construction and planned or proposed. We implemented constant continuous emissions from each location in the model and simulated atmospheric transport and removal via dry and wet deposition processes over 20 yr (2010–2030), driven by boundary conditions based on the IPCC A2 future emissions scenario. We present global overall and seasonal risk maps for potential surface layer concentrations and ground deposition of radionuclides, and estimate potential dosages to humans from the inhalation and the exposure to ground deposited radionuclides. We find that the risk of harmful doses due to inhalation is typically highest during boreal winter due to relatively shallow boundary layer development and reduced mixing. Based on the continued operation of the current nuclear power plants, we calculate that the risk of radioactive contamination to the citizens of the USA will remain to be highest worldwide, followed by India and France. By including stations under construction and those that are planned and proposed our results suggest that the risk will become highest in China, followed by India and the USA.

An Assessment of Mechanical Properties of A508-3 Steel Used in Chinese Nuclear Reactor Vessels

2014 ◽  
Author(s):  
Meifang Yu ◽  
Zhen Luo ◽  
Y. J. Chao
Keyword(s):  
Mechanical Properties ◽  
Nuclear Power ◽  
Power Plants ◽  
Fossil Fuels ◽  
Nuclear Reactor ◽  
Structural Integrity ◽  
Construction Materials ◽  
Under Construction ◽  
Made In China ◽  
Phase Out

China has very ambitious goals of expanding its commercial nuclear power by 30 Giga-Watts within the decade and wishes to phase out fossil fuels emissions by 40–45% by 2020 (from 2005 levels). With over 50 new nuclear power plants under construction or planned and a design life of 60 years, any discussions on structural integrity become very timely. Although China adopted its nuclear technology from France or US at present time, e.g. AP1000 of Westinghouse, the construction materials are primarily “Made in China”. Among all issues, both the accumulation of the knowledge base of the materials and structures used for the power plant and the technical capability of engineering personnel are imminent. This paper attempts to compile and assess the mechanical properties, Charpy V-notch impact energy, and fracture toughness of A508-3 steel used in Chinese nuclear reactor vessels. All data are collected from open literature and by no means complete. However, it provides a glimpse into how this domestically produced steel compares with western reactor vessel steels such as US A533B and Euro 20MnMoNi55.

Study on the Large-Scale Water/Electricity Cogeneration System in Nuclear Power Plants

2013 ◽  
Vol 448-453 ◽  
pp. 1912-1915
Author(s):  
Jin Li ◽  
Chu Fu Li ◽  
Yan Xia Zhang ◽  
Hui Guo Yue
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Large Scale ◽  
Nuclear Reactor ◽  
Operation Mode ◽  
Water Shortage ◽  
Variable Load ◽  
Cogeneration System ◽  
Full Load Operation

Water/electricity cogeneration system in nuclear power plants and its peaking operation modes are analyzed in this work. The large-scale water/electricity cogeneration system can use the valley nuclear power during nighttime for seawater desalination, which can improve the peaking capacity, decrease desalination water cost and alleviate the water shortage in coastal cities. The peaking operation mode results show that the reverse osmosis desalination system runs better with variable load mode "12-1-10-1" (day 50% - night 100%) under the full load operation of nuclear reactor. In this mode, the peaking capacity of the water/electricity cogeneration system is 33%, the desalination water cost is 3.49 Yuan/m3 and the peaking cost is 65 Yuan/MWh. Development of the large-scale water/electricity cogeneration system in nuclear power plants has multiple benefits in China.

Nuclear Power Plant Fires and Explosions: Part III — Hamaoka Piping Explosion

2017 ◽  
Author(s):  
Robert A. Leishear
Keyword(s):  
Nuclear Power ◽  
Noble Metals ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Water Hammer ◽  
Preventive Action ◽  
Hydrogen Ignition ◽  
Accident Conditions

An explosion that burst a steel pipe like a paper fire cracker at the Hamaoka Nuclear Power Station, Unit-1 is investigated in this paper, which is one of a series of papers investigating fires and explosions in nuclear power plants. The accumulation of flammable hydrogen and oxygen due to radiolysis has long been recognized as a potential problem in nuclear reactors, where radiolysis is the process that decomposes water into hydrogen and oxygen by radiation exposure in the reactor core. Hydrogen ignition and explosion has long been considered the cause of this Hamaoka piping explosion, but the cause of ignition was considered to be a minor fluid transient, or water hammer, that ignited flammable gasses in the piping, which was made possible by the presence of catalytic noble metals inside the piping. The theory presented here is that a much larger pressure surge occurred due to water hammer during operations. In fact, calculations presented here serve as proof of principle that this explosion mechanism may be present in many operating nuclear power plants. Chubu Electric, the operator of the Hamaoka plant, took appropriate actions to prevent this type of explosion in their plants in the future. In fact, this accident indicates one potential preventive action from explosions for other operating plants. Ensure that a system high point is available, where mixed hydrogen and oxygen may be removed during routine operations and during off-normal accident conditions, such as nuclear reactor meltdowns and loss of coolant accidents.

scholarly journals On the Root Causes of the Fukushima Daiichi Disaster from the Perspective of High Complexity and Tight Coupling in Large-Scale Systems

Symmetry ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 414
Author(s):  
Atsuo Murata ◽  
Waldemar Karwowski
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
High Complexity ◽  
Tight Coupling ◽  
Large Scale Systems ◽  
Safety Issues ◽  
Loss Of Coolant ◽  
Station Blackout ◽  
Fukushima Daiichi

This study explores the root causes of the Fukushima Daiichi disaster and discusses how the complexity and tight coupling in large-scale systems should be reduced under emergencies such as station blackout (SBO) to prevent future disasters. First, on the basis of a summary of the published literature on the Fukushima Daiichi disaster, we found that the direct causes (i.e., malfunctions and problems) included overlooking the loss of coolant and the nuclear reactor’s failure to cool down. Second, we verified that two characteristics proposed in “normal accident” theory—high complexity and tight coupling—underlay each of the direct causes. These two characteristics were found to have made emergency management more challenging. We discuss how such disasters in large-scale systems with high complexity and tight coupling could be prevented through an organizational and managerial approach that can remove asymmetry of authority and information and foster a climate of openly discussing critical safety issues in nuclear power plants.

Sign in / Sign up

Export Citation Format

Share Document