scholarly journals Combined retrieval of Arctic liquid water cloud and surface snow properties using airborne spectral solar remote sensing

2017 ◽  
Vol 10 (9) ◽  
pp. 3215-3230 ◽  
Author(s):  
André Ehrlich ◽  
Eike Bierwirth ◽  
Larysa Istomina ◽  
Manfred Wendisch
Keyword(s):  
Remote Sensing ◽  
Grain Size ◽  
Sea Ice ◽  
Optical Thickness ◽  
Liquid Water ◽  
Retrieval Algorithm ◽  
Continuous Transition ◽  
Cloud Properties ◽  
Cloud Optical Thickness ◽  
The Impact

Abstract. The passive solar remote sensing of cloud properties over highly reflecting ground is challenging, mostly due to the low contrast between the cloud reflectivity and that of the underlying surfaces (sea ice and snow). Uncertainties in the retrieved cloud optical thickness τ and cloud droplet effective radius reff, C may arise from uncertainties in the assumed spectral surface albedo, which is mainly determined by the generally unknown effective snow grain size reff, S. Therefore, in a first step the effects of the assumed snow grain size are systematically quantified for the conventional bispectral retrieval technique of τ and reff, C for liquid water clouds. In general, the impact of uncertainties of reff, S is largest for small snow grain sizes. While the uncertainties of retrieved τ are independent of the cloud optical thickness and solar zenith angle, the bias of retrieved reff, C increases for optically thin clouds and high Sun. The largest deviations between the retrieved and true original values are found with 83 % for τ and 62 % for reff, C. In the second part of the paper a retrieval method is presented that simultaneously derives all three parameters (τ, reff, C, reff, S) and therefore accounts for changes in the snow grain size. Ratios of spectral cloud reflectivity measurements at the three wavelengths λ1 = 1040 nm (sensitive to reff, S), λ2 = 1650 nm (sensitive to τ), and λ3 = 2100 nm (sensitive to reff, C) are combined in a trispectral retrieval algorithm. In a feasibility study, spectral cloud reflectivity measurements collected by the Spectral Modular Airborne Radiation measurement sysTem (SMART) during the research campaign Vertical Distribution of Ice in Arctic Mixed-Phase Clouds (VERDI, April/May 2012) were used to test the retrieval procedure. Two cases of observations above the Canadian Beaufort Sea, one with dense snow-covered sea ice and another with a distinct snow-covered sea ice edge are analysed. The retrieved values of τ, reff, C, and reff, S show a continuous transition of cloud properties across snow-covered sea ice and open water and are consistent with estimates based on satellite data. It is shown that the uncertainties of the trispectral retrieval increase for high values of τ, and low reff, S but nevertheless allow the effective snow grain size in cloud-covered areas to be estimated.

scholarly journals Combined retrieval of Arctic liquid water cloud and surface snow properties using airborne spectral solar remote sensing

2017 ◽  
Author(s):  
André Ehrlich ◽  
Eike Bierwirth ◽  
Larysa Istomina ◽  
Manfred Wendisch
Keyword(s):  
Remote Sensing ◽  
Grain Size ◽  
Sea Ice ◽  
Liquid Water ◽  
The Arctic ◽  
Retrieval Algorithm ◽  
Cloud Properties ◽  
Snow Properties ◽  
Surface Snow ◽  
Effective Grain Size

Abstract. In the Arctic, the passive solar remote sensing of cloud properties over highly reflecting ground is challenging due to the low contrast between the clouds and underlying surfaces (sea ice and snow). Uncertainties in retrieved cloud optical thickness τ and cloud droplet effective radius reff,C may arise from uncertainties in the assumed spectral surface albedo, which is mainly determined by the commonly unknown snow effective grain size reff,S. Therefore, in a first step this snow grain size effect is quantified systematically for a conventional bi-spectral retrieval of τ and reff,C for liquid water clouds. The largest impact of reff,S of up to 83 % on τ and 62 % on reff,C was found in case of small reff,S and optically thin clouds. In the second part of the paper a retrieval method is presented that simultaneously retrieves all three parameters (τ, reff,C, reff,S) in order to account for changes of the snow grain size in the cloud retrieval algorithm. Spectral cloud reflectivities at the three wavelength λ1 = 1040 nm (sensitive to reff,S), λ2 = 1650 nm (sensitive to τ), and λ3 = 2100 nm (sensitive to reff,C) were normalized to reflectivity ratios and combined in a tri-spectral retrieval algorithm. Measurements collected by the Spectral Modular Airborne Radiation measurement sysTem (SMART-Albedometer) during the research campaign Vertical Distribution of Ice in Arctic Mixed-Phase Clouds (VERDI, April/May 2012) were used to test the retrieval procedure. Two cases of observations above the Canadian Beaufort Sea, one with dense snow-covered sea ice and another with a distinct sea ice edge were analyzed. The retrieved values of τ, reff,C, and reff,S consistently represented the cloud properties across this transition from snow-covered sea ice to the open water and were comparable to estimates based on satellite data. Analysis showed, that the uncertainties of the tri-spectral retrieval increase for high τ, and low reff,S, but nevertheless allows a simultaneous retrieval of cloud and surface snow properties providing snow effective grain size estimates in cloud-covered areas.

scholarly journals Testing remote sensing on artificial observations: impact of drizzle and 3-D cloud structure on effective radius retrievals

2010 ◽  
Vol 10 (19) ◽  
pp. 9535-9549 ◽  
Author(s):  
T. Zinner ◽  
G. Wind ◽  
S. Platnick ◽  
A. S. Ackerman
Keyword(s):  
Remote Sensing ◽  
Particle Size ◽  
Radiative Transfer ◽  
Droplet Size ◽  
Optical Thickness ◽  
Marine Boundary Layer ◽  
Effective Radius ◽  
Retrieval Algorithm ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
The Impact

Abstract. Remote sensing of cloud effective particle size with passive sensors like the Moderate Resolution Imaging Spectroradiometer (MODIS) is an important tool for cloud microphysical studies. As a measure of the radiatively relevant droplet size, effective radius can be retrieved with different combinations of visible through shortwave and midwave infrared channels. In practice, retrieved effective radii from these combinations can be quite different. This difference is perhaps indicative of different penetration depths and path lengths for the spectral reflectances used. In addition, operational liquid water cloud retrievals are based on the assumption of a relatively narrow distribution of droplet sizes; the role of larger precipitation particles in these distributions is neglected. Therefore, possible explanations for the discrepancy in some MODIS spectral size retrievals could include 3-D radiative transport effects, including sub-pixel cloud inhomogeneity, and/or the impact of drizzle formation. For three cloud cases the possible factors of influence are isolated and investigated in detail by the use of simulated cloud scenes and synthetic satellite data: marine boundary layer cloud scenes from large eddy simulations (LES) with detailed microphysics are combined with Monte Carlo radiative transfer calculations that explicitly account for the detailed droplet size distributions as well as 3-D radiative transfer to simulate MODIS observations. The operational MODIS optical thickness and effective radius retrieval algorithm is applied to these and the results are compared to the given LES microphysics. We investigate two types of marine cloud situations each with and without drizzle from LES simulations: (1) a typical daytime stratocumulus deck at two times in the diurnal cycle and (2) one scene with scattered cumulus. Only small impact of drizzle formation on the retrieved domain average and on the differences between the three effective radius retrievals is noticed for both cloud scene types for different reasons. For our, presumably typical, overcast stratocumulus scenes with an optical thickness of 8 to 9 and rain rates at cloud bottom up to 0.05 mm/h clear drizzle impact on the retrievals can be excluded. The cumulus scene does not show much drizzle sensitivity either despite extended drizzle areas being directly visible from above (locally >1 mm/h), which is mainly due to technical characteristics of the standard retrieval approach. 3-D effects, on the other hand, produce large discrepancies between the 1.6 and 2.1 μm channel observations compared to 3.7 μm retrievals in the latter case. A general sensitivity of MODIS particle size data to drizzle formation is not corroborated by our case studies.

scholarly journals Testing remote sensing on artificial observations: impact of drizzle and 3-D cloud structure on effective radius retrievals

2010 ◽  
Vol 10 (1) ◽  
pp. 1221-1259
Author(s):  
T. Zinner ◽  
G. Wind ◽  
S. Platnick ◽  
A. S. Ackerman
Keyword(s):  
Remote Sensing ◽  
Particle Size ◽  
Radiative Transfer ◽  
Droplet Size ◽  
Optical Thickness ◽  
Marine Boundary Layer ◽  
Effective Radius ◽  
Retrieval Algorithm ◽  
Moderate Resolution Imaging Spectroradiometer ◽  
The Impact

Abstract. Remote sensing of cloud effective particle size with passive sensors like the Moderate Resolution Imaging Spectroradiometer (MODIS) is an important tool for cloud microphysical studies. As a measure of the radiatively relevant droplet size, effective radius can be retrieved with different combinations of visible through shortwave and midwave infrared channels. In practice, retrieved effective radii from these combinations can be quite different. This difference is perhaps indicative of different penetration depths and path lengths for the spectral reflectances used. In addition, operational liquid water cloud retrievals are based on the assumption of a relatively narrow distribution of droplet sizes; the role of larger precipitation particles in these distributions is neglected. Therefore, possible explanations for the discrepancy in some MODIS spectral size retrievals could include 3-D radiative transport effects, including sub-pixel cloud inhomogeneity, and/or the impact of drizzle formation. The possible factors of influence are isolated and investigated in detail by the use of simulated cloud scenes and synthetic satellite data: marine boundary layer cloud scenes from large eddy simulations (LES) with detailed microphysics are combined with Monte Carlo radiative transfer calculations that explicitly account for the detailed droplet size distributions as well as 3-D radiative transfer to simulate MODIS observations. The operational MODIS optical thickness and effective radius retrieval algorithm is applied to these and the results are compared to the given LES microphysics. We investigate two types of marine cloud situations each with and without drizzle from LES simulations: (1) a typical daytime stratocumulus deck at two times in the diurnal cycle and (2) one scene with scattered cumulus. Only small impact of drizzle formation on the retrieved domain average and on the differences between the three effective radius retrievals is noticed for both cloud scene types for different reasons. For the presumably typical overcast stratocumulus scenes, the optical thickness (8 to 9) is large enough to mask the drizzle rain rates at cloud bottom (up to 0.05 mm/h). The cumulus scene does not show much drizzle sensitivity either despite extended drizzle areas being directly visible from above (locally >1 mm/h), which is mainly due to characteristics of the standard retrieval approach. 3-D effects, on the other hand, produce large discrepancies between the 1.6 and 2.1 μm channel observations compared to 3.7 μm retrievals in the latter case. A general sensitivity of MODIS particle size data to drizzle formation is not corroborated by our results.

scholarly journals Observation of absorbing aerosols above clouds over the South- East Atlantic Ocean from the geostationary satellite SEVIRI – Part 1: Method description and sensitivity

2019 ◽  
Author(s):  
Fanny Peers ◽  
Peter Francis ◽  
Cathryn Fox ◽  
Steven J. Abel ◽  
Kate Szpek ◽  
...  
Keyword(s):  
Atlantic Ocean ◽  
Optical Thickness ◽  
Aerosol Size Distribution ◽  
Retrieval Algorithm ◽  
High Temporal Resolution ◽  
The South ◽  
East Atlantic ◽  
Aerosol Model ◽  
Cloud Properties ◽  
The Impact

Abstract. High temporal resolution observations from satellites have a great potential for studying the impact of biomass burning aerosols and clouds over the South East Atlantic Ocean (SEAO). This paper presents a method developed to retrieve simultaneously aerosol and cloud properties in aerosol above cloud conditions from the geostationary instrument Meteosat Second Generation/Spinning Enhanced Visible and Infrared Imager (MSG/SEVIRI). The above-cloud Aerosol Optical Thickness (AOT), the Cloud Optical Thickness (COT) and the Cloud droplet Effective Radius (CER) are derived from the spectral contrast and the magnitude of the signal measured in three channels in the visible to shortwave infrared region. The impact of the absorption from atmospheric gases on the satellite signal is corrected by applying transmittances calculated using the water vapour profiles from a Met Office forecast model. The sensitivity analysis shows that a 10 % error on the humidity profile leads to an 18.5 % bias on the above-cloud AOT, which highlights the importance of an accurate atmospheric correction scheme. In situ measurements from the CLARIFY-2017 airborne field campaign are used to constrain the aerosol size distribution and refractive index that is assumed for the aforementioned retrieval algorithm. The sensitivities in the retrieved AOT, COT and CER to the aerosol model assumptions are assessed. Although an uncertainty of 31.2 % is observed on the above-cloud AOT, the retrieval of the absorption AOT and both cloud properties is weakly sensitive to the aerosol model assumptions, with biases lower than 7 % and 3 % respectively. The stability of the retrieval over time is analysed. For observations outside of the backscattering glory region, the time-series of the aerosol and cloud properties are physically consistent, which confirms the ability of the retrieval to monitor the temporal evolution of aerosol above cloud events over the SEAO.

scholarly journals Resolving ice cloud optical thickness biases between CALIOP and MODIS using infrared retrievals

2016 ◽  
Vol 16 (8) ◽  
pp. 5075-5090 ◽  
Author(s):  
Robert E. Holz ◽  
Steven Platnick ◽  
Kerry Meyer ◽  
Mark Vaughan ◽  
Andrew Heidinger ◽  
...  
Keyword(s):  
Optical Thickness ◽  
Spatial Scales ◽  
Radiative Properties ◽  
Radiation Balance ◽  
Data Set ◽  
Mean Values ◽  
Ice Cloud ◽  
Lidar Ratio ◽  
Cloud Optical Thickness ◽  
The Impact

Abstract. Despite its importance as one of the key radiative properties that determines the impact of upper tropospheric clouds on the radiation balance, ice cloud optical thickness (IOT) has proven to be one of the more challenging properties to retrieve from space-based remote sensing measurements. In particular, optically thin upper tropospheric ice clouds (cirrus) have been especially challenging due to their tenuous nature, extensive spatial scales, and complex particle shapes and light-scattering characteristics. The lack of independent validation motivates the investigation presented in this paper, wherein systematic biases between MODIS Collection 5 (C5) and CALIOP Version 3 (V3) unconstrained retrievals of tenuous IOT (< 3) are examined using a month of collocated A-Train observations. An initial comparison revealed a factor of 2 bias between the MODIS and CALIOP IOT retrievals. This bias is investigated using an infrared (IR) radiative closure approach that compares both products with MODIS IR cirrus retrievals developed for this assessment. The analysis finds that both the MODIS C5 and the unconstrained CALIOP V3 retrievals are biased (high and low, respectively) relative to the IR IOT retrievals. Based on this finding, the MODIS and CALIOP algorithms are investigated with the goal of explaining and minimizing the biases relative to the IR. For MODIS we find that the assumed ice single-scattering properties used for the C5 retrievals are not consistent with the mean IR COT distribution. The C5 ice scattering database results in the asymmetry parameter (g) varying as a function of effective radius with mean values that are too large. The MODIS retrievals have been brought into agreement with the IR by adopting a new ice scattering model for Collection 6 (C6) consisting of a modified gamma distribution comprised of a single habit (severely roughened aggregated columns); the C6 ice cloud optical property models have a constant g ≈ 0.75 in the mid-visible spectrum, 5–15 % smaller than C5. For CALIOP, the assumed lidar ratio for unconstrained retrievals is fixed at 25 sr for the V3 data products. This value is found to be inconsistent with the constrained (predominantly nighttime) CALIOP retrievals. An experimental data set was produced using a modified lidar ratio of 32 sr for the unconstrained retrievals (an increase of 28 %), selected to provide consistency with the constrained V3 results. These modifications greatly improve the agreement with the IR and provide consistency between the MODIS and CALIOP products. Based on these results the recently released MODIS C6 optical products use the single-habit distribution given above, while the upcoming CALIOP V4 unconstrained algorithm will use higher lidar ratios for unconstrained retrievals.

scholarly journals Estimating cloud optical thickness and associated surface UV irradiance from SEVIRI by implementing a semi-analytical cloud retrieval algorithm

2012 ◽  
Vol 12 (17) ◽  
pp. 7961-7975 ◽  
Author(s):  
P. Pandey ◽  
K. De Ridder ◽  
D. Gillotay ◽  
N. P. M. van Lipzig
Keyword(s):  
Optical Thickness ◽  
Correlation Coefficients ◽  
Retrieval Algorithm ◽  
Satellite Mission ◽  
Spectral Bands ◽  
Uv Irradiance ◽  
Intercomparison Exercises ◽  
Cloud Optical Thickness ◽  
Mean Square Difference ◽  
Good Agreement

Abstract. In this paper, we describe the implementation of the Semi-Analytical Cloud Retrieval Algorithm (SACURA), to obtain scaled cloud optical thickness (SCOT) from satellite imagery acquired with the SEVIRI instrument and surface UV irradiance levels. In estimation of SCOT particular care is given to the proper specification of the background (i.e. cloud-free) spectral albedo and the retrieval of the cloud water phase from reflectance ratios in SEVIRI's 0.6 μm and 1.6 μm spectral bands. The SACURA scheme is then applied to daytime SEVIRI imagery over Europe, for the month of June 2006, at 15-min time increments. The resulting SCOT fields are compared with values obtained by the CloudSat experimental satellite mission, yielding a negligible bias, correlation coefficients ranging from 0.51 to 0.78, and a root mean square difference of 1 to 2 SCOT increments. These findings compare favourably to results from similar intercomparison exercises reported in the literature. Based on the retrieved SCOT from SEVIRI and radiative transfer modelling approach, simple parameterisations are proposed to estimate the surface UV-A and UV-B irradiance. The validation of the modelled UV-A and UV-B irradiance against the measurements over two Belgian stations, Redu and Ostend, indicate good agreement with the high correlation, index of agreement and low bias. The SCOT fields estimated by implementing SACURA on imagery from geostationary satellite are reliable and its impact on surface UV irradiance levels is well produced.

scholarly journals Retrieved Optical Thickness for Analyzing The Aerosol and Cloud Properties Using Lidar Remote Sensing

2012 ◽  
Vol 13 (1) ◽  
pp. 7
Author(s):  
Syamsir Dewang
Keyword(s):  
Remote Sensing ◽  
Optical Thickness ◽  
Reference Data ◽  
Single Scattering ◽  
Lidar Data ◽  
Night Time ◽  
Cloud Properties ◽  
Tropical Area ◽  
Signal Simulation ◽  
The One

The lidar remote sensing is the one important application to observe the aerosol and cloud of the atmosphere. Themicropulse lidar (MPL) return signals were studied in the tropical area. In this investigation, the single scatteringis analyzed by the physical properties of aerosol and cloud. The signal simulation of the single scattering predictsthe maximum optical thickness by saturation. It was observed that saturation optical thickness from the lidarsignal depends on the variation of extinction coefficient. This simulation is compared by the optical thicknessestimation from the lidar data. The MPL data (at wavelength of 523 nm) was determined, and the sky radiometer (atwavelength 500 nm) was used as reference data. The maximum optical thickness of lidar was 2.6 at night time,and the maximum optical depth of lidar and sky radiometer data on the same day were 2.25 and 1.7, respectively.

scholarly journals Clouds damp the radiative impacts of polar sea ice loss

2020 ◽  
Vol 14 (8) ◽  
pp. 2673-2686 ◽  
Author(s):  
Ramdane Alkama ◽  
Patrick C. Taylor ◽  
Lorea Garcia-San Martin ◽  
Herve Douville ◽  
Gregory Duveiller ◽  
...  
Keyword(s):  
Sea Ice ◽  
Climate Models ◽  
Surface Radiation ◽  
Radiation Budget ◽  
The Arctic ◽  
Cloud Properties ◽  
Surface Radiation Budget ◽  
Cloud Radiative Effect ◽  
Radiative Impact ◽  
The Impact

Abstract. Clouds play an important role in the climate system: (1) cooling Earth by reflecting incoming sunlight to space and (2) warming Earth by reducing thermal energy loss to space. Cloud radiative effects are especially important in polar regions and have the potential to significantly alter the impact of sea ice decline on the surface radiation budget. Using CERES (Clouds and the Earth's Radiant Energy System) data and 32 CMIP5 (Coupled Model Intercomparison Project) climate models, we quantify the influence of polar clouds on the radiative impact of polar sea ice variability. Our results show that the cloud short-wave cooling effect strongly influences the impact of sea ice variability on the surface radiation budget and does so in a counter-intuitive manner over the polar seas: years with less sea ice and a larger net surface radiative flux show a more negative cloud radiative effect. Our results indicate that 66±2% of this change in the net cloud radiative effect is due to the reduction in surface albedo and that the remaining 34±1 % is due to an increase in cloud cover and optical thickness. The overall cloud radiative damping effect is 56±2 % over the Antarctic and 47±3 % over the Arctic. Thus, present-day cloud properties significantly reduce the net radiative impact of sea ice loss on the Arctic and Antarctic surface radiation budgets. As a result, climate models must accurately represent present-day polar cloud properties in order to capture the surface radiation budget impact of polar sea ice loss and thus the surface albedo feedback.

Sign in / Sign up

Export Citation Format

Share Document