scholarly journals The new BELUGA setup for collocated turbulence and radiation measurements using a tethered balloon: first applications in the cloudy Arctic boundary layer

2019 ◽  
Vol 12 (7) ◽  
pp. 4019-4038 ◽  
Author(s):  
Ulrike Egerer ◽  
Matthias Gottschalk ◽  
Holger Siebert ◽  
André Ehrlich ◽  
Manfred Wendisch
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Turbulent Fluxes ◽  
Lower Atmosphere ◽  
The Arctic ◽  
Radiative Cooling ◽  
Illustrative Case ◽  
Tethered Balloon ◽  
Arctic Boundary Layer ◽  
Radiation Measurements

Abstract. The new BELUGA (Balloon-bornE moduLar Utility for profilinG the lower Atmosphere) tethered balloon system is introduced. It combines a set of instruments to measure turbulent and radiative parameters and energy fluxes. BELUGA enables collocated measurements either at a constant altitude or as vertical profiles up to 1.5 km in height. In particular, the instrument payload of BELUGA comprises three modular instrument packages for high-resolution meteorological, wind vector and broadband radiation measurements. Collocated data acquisition allows for estimates of the driving parameters in the energy balance at various heights. Heating rates and net irradiances can be related to turbulent fluxes and local turbulence parameters such as dissipation rates. In this paper the technical setup, the instrument performance, and the measurement strategy of BELUGA are explained. Furthermore, the high vertical resolution due to the slow ascent speed is highlighted as a major advantage of tethered balloon-borne observations. Three illustrative case studies of the first application of BELUGA in the Arctic atmospheric boundary layer are presented. As a first example, measurements of a single-layer stratocumulus are discussed. They show a pronounced cloud top radiative cooling of up to 6 K h−1. To put this into context, a second case elaborates respective measurements with BELUGA in a cloudless situation. In a third example, a multilayer stratocumulus was probed, revealing reduced turbulence and negligible cloud top radiative cooling for the lower cloud layer. In all three cases the net radiative fluxes are much higher than turbulent fluxes. Altogether, BELUGA has proven its robust performance in cloudy conditions of the Arctic atmospheric boundary layer.

scholarly journals The new BELUGA setup for collocated turbulence and radiation measurements using a tethered balloon: First applications in the cloudy Arctic boundary layer

2019 ◽  
Author(s):  
Ulrike Egerer ◽  
Matthias Gottschalk ◽  
Holger Siebert ◽  
André Ehrlich ◽  
Manfred Wendisch
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
Turbulent Fluxes ◽  
Lower Atmosphere ◽  
The Arctic ◽  
Radiative Cooling ◽  
Illustrative Case ◽  
Tethered Balloon ◽  
Arctic Boundary Layer ◽  
Radiation Measurements

Abstract. The new BELUGA (Balloon-bornE moduLar Utility for profilinG the lower Atmosphere) tethered balloon system is introduced. It combines a set of instruments to measure turbulent and radiative parameters and energy fluxes. BELUGA enables collocated measurements either at a constant altitude or as vertical profiles up to 1.5 km height. In particular, the instrument payload of BELUGA comprises three modular instrument packages for high resolution meteorological, wind vector and broadband radiation measurements. The collocated data acquisition allows to estimate the driving parameters of the energy balance in various altitudes. Heating rates and net irradiances can be related to turbulent fluxes and local turbulence parameters such as dissipation rates. In this paper the technical setup, the instrument performance, and the measurement strategy of BELUGA are explained. Furthermore, the high vertical resolution due to the slow ascent speed is highlighted as a major advantage of tethered balloon-borne observations. Three illustrative case studies of the first application of BELUGA in the Arctic atmospheric boundary layer are presented. As a first example, measurements of a single layer stratocumulus are discussed. They show a pronounced cloud top radiative cooling of up to 6 K h−1. To put this into context, a second case elaborates respective measurements with BELUGA in a cloudless situation. In a third example, a multi layer stratocumulus was probed, revealing reduced turbulence and negligible cloud top radiative cooling for the lower cloud layer. In all three cases the net radiative fluxes are much higher than turbulent fluxes. Altogether, BELUGA has proven its robust performance in cloudy conditions of the Arctic atmospheric boundary layer.

scholarly journals An aircraft-borne chemical ionization – ion trap mass spectrometer (CI-ITMS) for fast PAN and PPN measurements

2010 ◽  
Vol 3 (5) ◽  
pp. 4313-4354
Author(s):  
A. Roiger ◽  
H. Aufmhoff ◽  
P. Stock ◽  
F. Arnold ◽  
H. Schlager
Keyword(s):  
Boundary Layer ◽  
Mass Spectrometer ◽  
Chemical Ionization ◽  
Ion Trap ◽  
The Arctic ◽  
Arctic Boundary Layer ◽  
Online Calibration ◽  
Mixing Ratios ◽  
Ion Trap Mass Spectrometer ◽  
Research Aircraft

Abstract. An airborne chemical ionization ion trap mass spectrometer instrument (CI-ITMS) has been developed for tropospheric and stratospheric fast in-situ measurements of PAN (peroxyacetyl nitrate) and PPN (peroxypropionyl nitrate). The first scientific deployment of the FASTPEX instrument (FASTPEX = Fast Measurement of Peroxyacyl nitrates) took place in the Arctic during 18 missions aboard the DLR research aircraft Falcon, within the framework of the POLARCAT-GRACE campaign in the summer of 2008. The FASTPEX instrument is described and characteristic properties of the employed ion trap mass spectrometer are discussed. Atmospheric data obtained at altitudes of up to ~12 km are presented, from the boundary layer to the lowermost stratosphere. Data were sampled with a time resolution of 2 s and a 2σ detection limit of 25 pmol mol−1. An isotopically labelled standard was used for a permanent online calibration. For this reason the accuracy of the PAN measurements is better than ±10% for mixing ratios greater than 200 pmol mol−1. PAN mixing ratios in the summer Arctic troposphere were in the order of a few hundred pmol mol−1 and generally correlated well with CO. In the Arctic boundary layer and lowermost stratosphere smaller PAN mixing ratios were observed due to a combination of missing local sources of PAN precursor gases and efficient removal processes (thermolysis/photolysis). PPN, the second most abundant PAN homologue, was measured simultanously. Observed PPN/PAN ratios range between ~0.03 and 0.3.

scholarly journals Stable Atmospheric Boundary Layers and Diurnal Cycles: Challenges for Weather and Climate Models

2013 ◽  
Vol 94 (11) ◽  
pp. 1691-1706 ◽  
Author(s):  
A. A. M. Holtslag ◽  
G. Svensson ◽  
P. Baas ◽  
S. Basu ◽  
B. Beare ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Atmospheric Boundary Layer ◽  
Climate Models ◽  
Model Performance ◽  
Weather Forecast ◽  
The Arctic ◽  
Diurnal Cycles ◽  
Low Wind Speed ◽  
Weather And Climate

The representation of the atmospheric boundary layer is an important part of weather and climate models and impacts many applications such as air quality and wind energy. Over the years, the performance in modeling 2-m temperature and 10-m wind speed has improved but errors are still significant. This is in particular the case under clear skies and low wind speed conditions at night as well as during winter in stably stratified conditions over land and ice. In this paper, the authors review these issues and provide an overview of the current understanding and model performance. Results from weather forecast and climate models are used to illustrate the state of the art as well as findings and recommendations from three intercomparison studies held within the Global Energy and Water Exchanges (GEWEX) Atmospheric Boundary Layer Study (GABLS). Within GABLS, the focus has been on the examination of the representation of the stable boundary layer and the diurnal cycle over land in clear-sky conditions. For this purpose, single-column versions of weather and climate models have been compared with observations, research models, and large-eddy simulations. The intercomparison cases are based on observations taken in the Arctic, Kansas, and Cabauw in the Netherlands. From these studies, we find that even for the noncloudy boundary layer important parameterization challenges remain.

scholarly journals The Arctic Boundary Layer Expedition (ABLE 3A): July–August 1988

1992 ◽  
Vol 97 (D15) ◽  
pp. 16383 ◽  
Author(s):  
R. C. Harriss ◽  
S. C. Wofsy ◽  
D. S. Bartlett ◽  
M. C. Shipham ◽  
D. J. Jacob ◽  
...  
Keyword(s):  
Boundary Layer ◽  
The Arctic ◽  
Arctic Boundary Layer

scholarly journals Ozone variability and halogen oxidation within the Arctic and sub-Arctic springtime boundary layer

2010 ◽  
Vol 10 (21) ◽  
pp. 10223-10236 ◽  
Author(s):  
J. B. Gilman ◽  
J. F. Burkhart ◽  
B. M. Lerner ◽  
E. J. Williams ◽  
W. C. Kuster ◽  
...  
Keyword(s):  
Boundary Layer ◽  
North Atlantic ◽  
Marine Boundary Layer ◽  
Transport Model ◽  
Arctic Basin ◽  
The Arctic ◽  
Arctic Boundary Layer ◽  
Air Masses ◽  
The North ◽  
The North Atlantic

Abstract. The influence of halogen oxidation on the variabilities of ozone (O3) and volatile organic compounds (VOCs) within the Arctic and sub-Arctic atmospheric boundary layer was investigated using field measurements from multiple campaigns conducted in March and April 2008 as part of the POLARCAT project. For the ship-based measurements, a high degree of correlation (r = 0.98 for 544 data points collected north of 68° N) was observed between the acetylene to benzene ratio, used as a marker for chlorine and bromine oxidation, and O3 signifying the vast influence of halogen oxidation throughout the ice-free regions of the North Atlantic. Concurrent airborne and ground-based measurements in the Alaskan Arctic substantiated this correlation and were used to demonstrate that halogen oxidation influenced O3 variability throughout the Arctic boundary layer during these springtime studies. Measurements aboard the R/V Knorr in the North Atlantic and Arctic Oceans provided a unique view of the transport of O3-poor air masses from the Arctic Basin to latitudes as far south as 52° N. FLEXPART, a Lagrangian transport model, was used to quantitatively determine the exposure of air masses encountered by the ship to first-year ice (FYI), multi-year ice (MYI), and total ICE (FYI+MYI). O3 anti-correlated with the modeled total ICE tracer (r = −0.86) indicating that up to 73% of the O3 variability measured in the Arctic marine boundary layer could be related to sea ice exposure.

scholarly journals Signature of Arctic surface ozone depletion events in the isotope anomaly (Δ<sup>17</sup>O) of atmospheric nitrate

2007 ◽  
Vol 7 (5) ◽  
pp. 1451-1469 ◽  
Author(s):  
S. Morin ◽  
J. Savarino ◽  
S. Bekki ◽  
S. Gong ◽  
J. W. Bottenheim
Keyword(s):  
Boundary Layer ◽  
Ozone Depletion ◽  
Surface Ozone ◽  
The Arctic ◽  
Arctic Boundary Layer ◽  
Mixing Ratios ◽  
Atmospheric Nitrate ◽  
Boundary Layer Ozone ◽  
Oxidation Of No ◽  
Arctic Surface

Abstract. We report the first measurements of the oxygen isotope anomaly of atmospheric inorganic nitrate from the Arctic. Nitrate samples and complementary data were collected at Alert, Nunavut, Canada (82°30 ' N, 62°19 ' W) in spring 2004. Covering the polar sunrise period, characterized by the occurrence of severe boundary layer ozone depletion events (ODEs), our data show a significant correlation between the variations of atmospheric ozone (O3) mixing ratios and Δ17O of nitrate (Δ17O(NO−3)). This relationship can be expressed as: Δ17O(NO−3)/‰, =(0.15±0.03)×O3/(nmol mol–1)+(29.7±0.7), with R2=0.70(n=12), for Δ17O(NO−3) ranging between 29 and 35 ‰. We derive mass-balance equations from chemical reactions operating in the Arctic boundary layer, that describe the evolution of Δ17O(NO−3) as a function of the concentrations of reactive species and their isotopic characteristics. Changes in the relative importance of O3, RO2 and BrO in the oxidation of NO during ODEs, and the large isotope anomalies of O3 and BrO, are the driving force for the variability in the measured Δ17O(NO−3) . BrONO2 hydrolysis is found to be a dominant source of nitrate in the Arctic boundary layer, in agreement with recent modeling studies.

scholarly journals Analysis of reactive bromine production and ozone depletion in the Arctic boundary layer using 3-D simulations with GEM-AQ: inference from synoptic-scale patterns

2011 ◽  
Vol 11 (8) ◽  
pp. 3949-3979 ◽  
Author(s):  
K. Toyota ◽  
J. C. McConnell ◽  
A. Lupu ◽  
L. Neary ◽  
C. A. McLinden ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Sea Ice ◽  
Ozone Depletion ◽  
Surface Ozone ◽  
High Arctic ◽  
Heterogeneous Reactions ◽  
The Arctic ◽  
Synoptic Scale ◽  
Arctic Boundary Layer ◽  
Surface Snow

Abstract. Episodes of high bromine levels and surface ozone depletion in the springtime Arctic are simulated by an online air-quality model, GEM-AQ, with gas-phase and heterogeneous reactions of inorganic bromine species and a simple scheme of air-snowpack chemical interactions implemented for this study. Snowpack on sea ice is assumed to be the only source of bromine to the atmosphere and to be capable of converting relatively stable bromine species to photolabile Br2 via air-snowpack interactions. A set of sensitivity model runs are performed for April 2001 at a horizontal resolution of approximately 100 km×100 km in the Arctic, to provide insights into the effects of temperature and the age (first-year, FY, versus multi-year, MY) of sea ice on the release of reactive bromine to the atmosphere. The model simulations capture much of the temporal variations in surface ozone mixing ratios as observed at stations in the high Arctic and the synoptic-scale evolution of areas with enhanced BrO column amount ("BrO clouds") as estimated from satellite observations. The simulated "BrO clouds" are in modestly better agreement with the satellite measurements when the FY sea ice is assumed to be more efficient at releasing reactive bromine to the atmosphere than on the MY sea ice. Surface ozone data from coastal stations used in this study are not sufficient to evaluate unambiguously the difference between the FY sea ice and the MY sea ice as a source of bromine. The results strongly suggest that reactive bromine is released ubiquitously from the snow on the sea ice during the Arctic spring while the timing and location of the bromine release are largely controlled by meteorological factors. It appears that a rapid advection and an enhanced turbulent diffusion associated with strong boundary-layer winds drive transport and dispersion of ozone to the near-surface air over the sea ice, increasing the oxidation rate of bromide (Br−) in the surface snow. Also, if indeed the surface snowpack does supply most of the reactive bromine in the Arctic boundary layer, it appears to be capable of releasing reactive bromine at temperatures as high as −10 °C, particularly on the sea ice in the central and eastern Arctic Ocean. Dynamically-induced BrO column variability in the lowermost stratosphere appears to interfere with the use of satellite BrO column measurements for interpreting BrO variability in the lower troposphere but probably not to the extent of totally obscuring "BrO clouds" that originate from the surface snow/ice source of bromine in the high Arctic. A budget analysis of the simulated air-surface exchange of bromine compounds suggests that a "bromine explosion" occurs in the interstitial air of the snowpack and/or is accelerated by heterogeneous reactions on the surface of wind-blown snow in ambient air, both of which are not represented explicitly in our simple model but could have been approximated by a parameter adjustment for the yield of Br2 from the trigger.

Snowpack processing of acetaldehyde and acetone in the Arctic atmospheric boundary layer

2002 ◽  
Vol 36 (15-16) ◽  
pp. 2743-2752 ◽  
Author(s):  
Christophe Guimbaud ◽  
Amanda M Grannas ◽  
Paul B Shepson ◽  
José D Fuentes ◽  
Hacene Boudries ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Atmospheric Boundary Layer ◽  
The Arctic
Sign in / Sign up

Export Citation Format

Share Document