scholarly journals A remote sensing technique for global monitoring of power plant CO<sub>2</sub> emissions from space and related applications

2010 ◽  
Vol 3 (1) ◽  
pp. 55-110 ◽  
Author(s):  
H. Bovensmann ◽  
M. Buchwitz ◽  
J. P. Burrows ◽  
M. Reuter ◽  
T. Krings ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Power Plant ◽  
Greenhouse Gas ◽  
Co2 Emissions ◽  
Kyoto Protocol ◽  
Inverse Modeling ◽  
Co2 Emission ◽  
Power Plants ◽  
Independent Verification ◽  
Anthropogenic Co2

Abstract. Carbon dioxide (CO2) is the most important anthropogenic greenhouse gas causing global warming. The atmospheric CO2 concentration increased by more than 30% since pre-industrial times – primarily due to burning of fossil fuels – and still continues to increase. Reporting of CO2 emissions is required by the Kyoto protocol. Independent verification of reported emissions, which are typially not directly measured, by methods such as inverse modeling of measured atmospheric CO2 concentrations is currently not possible globally due to lack of appropriate observations. Existing greenhouse gas observing satellites such as SCIAMACHY and GOSAT focus on advancing our understanding of natural CO2 sources and sinks. The obvious next step for future generation satellites is to also measure anthropogenic CO2 emissions. Here we present a promising satellite remote sensing technology based on spectroscopic measurements of reflected solar radiation in the short-wave infrared (SWIR) and near-infrared (NIR) spectral regions and show, using power plants as an example, that strong localized CO2 point sources can be detected and their emissions quantified. This requires mapping the CO2 column distribution at a spatial resolution of 2×2 km2 or better with a precision of about 0.5% (2 ppm) or better of the background column. We indicate that this can be achieved with existing technology. For a single satellite in sun-synchronous orbit with an across-track swath width of 500 km each power plant is overflown every 6 days or faster. Based on clear sky statistics we conservatively estimate that about one useful measurement per 1–2 months for a given power plant can typically be achieved. We found that the uncertainty of the retrieved power plant CO2 emission during a single satellite overpass is in the range 0.5–5 MtCO2/year – depending on observation conditions – which is about 2–20% of the CO2 emission of large power plants (25 Mt CO2/year). The investigated instrument aims at fulfilling all requirements for global regional-scale CO2 and CH4 surface flux inverse modeling. Using a significantly less demanding instrument concept based on a single SWIR channel we indicate that this also enables the monitoring of power plant CO2 emissions in addition to high-quality methane retrievals. The latter has already been demonstrated by SCIAMACHY. The discussed technology has the potential to significantly contribute to an independent verification of reported anthropogenic CO2 emissions and therefore could be an important component of a future global anthropogenic CO2 emission monitoring system. This is of relevance in the context of Kyoto protocol follow-on agreements but also allows to detect and monitor strong natural CO2 and CH4 emitters such as (mud) volcanoes.

scholarly journals A remote sensing technique for global monitoring of power plant CO<sub>2</sub> emissions from space and related applications

2010 ◽  
Vol 3 (4) ◽  
pp. 781-811 ◽  
Author(s):  
H. Bovensmann ◽  
M. Buchwitz ◽  
J. P. Burrows ◽  
M. Reuter ◽  
T. Krings ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Wind Speed ◽  
Power Plant ◽  
Co2 Emissions ◽  
Kyoto Protocol ◽  
Inverse Modeling ◽  
Point Sources ◽  
Atmospheric Co2 ◽  
Independent Verification ◽  
Anthropogenic Co2

Abstract. Carbon dioxide (CO2) is the most important anthropogenic greenhouse gas (GHG) causing global warming. The atmospheric CO2 concentration increased by more than 30% since pre-industrial times – primarily due to burning of fossil fuels – and still continues to increase. Reporting of CO2 emissions is required by the Kyoto protocol. Independent verification of reported emissions, which are typially not directly measured, by methods such as inverse modeling of measured atmospheric CO2 concentrations is currently not possible globally due to lack of appropriate observations. Existing satellite instruments such as SCIAMACHY/ENVISAT and TANSO/GOSAT focus on advancing our understanding of natural CO2 sources and sinks. The obvious next step for future generation satellites is to also constrain anthropogenic CO2 emissions. Here we present a promising satellite remote sensing concept based on spectroscopic measurements of reflected solar radiation and show, using power plants as an example, that strong localized CO2 point sources can be detected and their emissions quantified. This requires mapping the atmospheric CO2 column distribution at a spatial resolution of 2×2 km2 with a precision of 0.5% (2 ppm) or better. We indicate that this can be achieved with existing technology. For a single satellite in sun-synchronous orbit with a swath width of 500 km, each power plant (PP) is overflown every 6 days or more frequent. Based on the MODIS cloud mask data product we conservatively estimate that typically 20 sufficiently cloud free overpasses per PP can be achieved every year. We found that for typical wind speeds in the range of 2–6 m/s the statistical uncertainty of the retrieved PP CO2 emission due to instrument noise is in the range 1.6–4.8 MtCO2/yr for single overpasses. This corresponds to 12–36% of the emission of a mid-size PP (13 MtCO2/yr). We have also determined the sensitivity to parameters which may result in systematic errors such as atmospheric transport and aerosol related parameters. We found that the emission error depends linearly on wind speed, i.e., a 10% wind speed error results in a 10% emission error, and that neglecting enhanced aerosol concentrations in the PP plume may result in errors in the range 0.2–2.5 MtCO2/yr, depending on PP aerosol emission. The discussed concept has the potential to contribute to an independent verification of reported anthropogenic CO2 emissions and therefore could be an important component of a future global anthropogenic GHG emission monitoring system. This is of relevance in the context of Kyoto protocol follow-on agreements but also allows detection and monitoring of a variety of other strong natural and anthropogenic CO2 and CH4 emitters. The investigated instrument is not limited to these applications as it has been specified to also deliver the data needed for global regional-scale CO2 and CH4 surface flux inverse modeling.

scholarly journals Towards space-borne monitoring of localized CO<sub>2</sub> emissions: an instrument concept and first performance assessment

2020 ◽  
Author(s):  
Johan Strandgren ◽  
David Krutz ◽  
Jonas Wilzewski ◽  
Carsten Paproth ◽  
Ilse Sebastian ◽  
...  
Keyword(s):  
Power Plant ◽  
Performance Assessment ◽  
Co2 Emissions ◽  
Co2 Emission ◽  
Power Plants ◽  
Point Sources ◽  
Source Strength ◽  
Spectral Window ◽  
Instrument Noise ◽  
Noise Error

Abstract. The UNFCCC (United Nations Framework Convention on Climate Change) requires the nations of the world to report their carbon dioxide (CO2) emissions. Independent verification of these reported emissions is a corner stone for advancing towards emission accounting and reduction measures agreed upon in the Paris agreement. In this paper, we present the concept and first performance assessment of a compact space-borne imaging spectrometer that could support the task of "monitoring, verification, reporting" (MVR) of CO2 emissions worldwide. With a single spectral window in the short-wave infrared spectral region and a spatial resolution of 50 x 50 m2, the goal is to reliably estimate the CO2 emissions from localized sources down to a source strength of approx. 1 MtCO2 yr-1, hence complementing other planned CO2 monitoring missions, like the planned European Carbon Constellation (CO2M). Resolving CO2 plumes also from medium-sized power plants (1–10 MtCO2 yr-1) is of key importance for independent quantification of CO2 emissions from the coal-fired power plant sector. Through radiative transfer simulations, including a realistic instrument noise model and a global trial ensemble covering various geophysical scenarios, it is shown that an instrument noise error of 1.1 ppm (1σ) can be achieved for the retrieval of the column-averaged dry-air mole fraction of CO2 (XCO2). Despite limited amount of information from a single spectral window and a relatively coarse spectral resolution, scattering by atmospheric aerosol and cirrus can be partly accounted for in the XCO2 retrieval, with deviations of at most 4.0 ppm from the true abundance for 68 % of the scenes in the global trial ensemble. We further simulate the ability of the proposed instrument concept to observe CO2 plumes from single power plants in an urban area using high-resolution CO2 emission and surface albedo data for the city of Indianapolis. Given the preliminary instrument design and the corresponding instrument noise error, emission plumes from point sources with an emission rate down to the order of 0.3 MtCO2 yr-1 can be resolved, i.e. well below the target source strength of 1 MtCO2 yr-1. Hence, the proposed instrument concept could be able to resolve and quantify the CO2 plumes from localized point sources responsible for approx. 90 % of the power plant CO2 emission budget, assuming global coverage through a fleet of sensors and favorable conditions with respect to illumination and particle scattering.

scholarly journals CO2 Emission Calculation and Emission Characteristics Analysis of Typical 600MW Coal-fired Thermal Power Unit

2020 ◽  
Vol 165 ◽  
pp. 01029 ◽  
Author(s):  
Yu Honghai ◽  
Wang Zhi ◽  
Chen Li ◽  
Wu Jianan
Keyword(s):  
Power Plant ◽  
Co2 Emissions ◽  
Emission Intensity ◽  
Co2 Emission ◽  
Power Plants ◽  
Thermal Power ◽  
Emission Characteristics ◽  
The Past ◽  
Characteristics Analysis ◽  
Co2 Emission Intensity

In order to effectively reduce the total CO2 emissions of coal-fired power plants and reduce greenhouse gas emissions, the relevant data of a typical 600MW coal-fired power plant in the past five years was collected and investigated, and CO2 emissions and emission intensity were calculated. And the results were used to measure the CO2 emission level of coal-fired power plants. By comparing and analyzing the CO2 emission intensity and emission trend of 600MW coal-fired units with different unit types and different fuel types, the CO2 emission characteristics of typical 600MW coal-fired power plants are obtained.

Determining and Forecasting Regional Carbon Dioxide Emissions of Turkey

2011 ◽  
Author(s):  
S. Yeser Aslanoglu ◽  
Merih Aydinalp Koksal
Keyword(s):  
Carbon Dioxide ◽  
Co2 Emissions ◽  
Kyoto Protocol ◽  
Carbon Dioxide Emissions ◽  
Load Distribution ◽  
Co2 Emission ◽  
Electricity Generation ◽  
Power Plants ◽  
Pollutant Emissions ◽  
Noticeable Increase

In parallel to the increase in population and industrialization, the electricity demand of Turkey has been increasing rapidly in recent years. This has caused a noticeable increase in CO2 emission from electricity generation, especially due to the use of fossil fuelled power plants. These plants are mostly located in highly industrialized regions to reduce transmission loses and in regions with large amounts of coal and lignite reservoirs. In addition, using vast amounts of low quality lignite with high ash and sulphur contents in these power plants have affected these regions in recent years. Determining the pollutant emissions, and especially CO2 emissions, from these plants has been more significant after the ratification of Kyoto Protocol by Turkey in 2009. Within the context of this study, electricity generation associated CO2 emissions from existing power plants that run between 2001 and 2008 are determined. In addition to this, associated CO2 emissions from the power plants that are planned to be operated between 2009 and 2020 are also estimated. All assessments are made for nine load distribution regions in which electricity is generated and transmitted in Turkey. Therefore, regional electricity generation and associated CO2 emissions, and the shares of renewable sources for electricity generation are determined between 2001 and 2020. To the authors’ knowledge, this is the first study that determines and estimates electricity generation associated CO2 emissions regionally for Turkey.

scholarly journals Estimating CO2 Emissions from Large Scale Coal-Fired Power Plants Using OCO-2 Observations and Emission Inventories

Atmosphere ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 811
Author(s):  
Yaqin Hu ◽  
Yusheng Shi
Keyword(s):  
Power Plant ◽  
Co2 Emissions ◽  
Atmospheric Carbon Dioxide ◽  
Power Plants ◽  
Large Scale ◽  
Global Climate ◽  
Gaussian Model ◽  
Point Sources ◽  
Emission Inventories ◽  
Bottom Up

The concentration of atmospheric carbon dioxide (CO2) has increased rapidly worldwide, aggravating the global greenhouse effect, and coal-fired power plants are one of the biggest contributors of greenhouse gas emissions in China. However, efficient methods that can quantify CO2 emissions from individual coal-fired power plants with high accuracy are needed. In this study, we estimated the CO2 emissions of large-scale coal-fired power plants using Orbiting Carbon Observatory-2 (OCO-2) satellite data based on remote sensing inversions and bottom-up methods. First, we mapped the distribution of coal-fired power plants, displaying the total installed capacity, and identified two appropriate targets, the Waigaoqiao and Qinbei power plants in Shanghai and Henan, respectively. Then, an improved Gaussian plume model method was applied for CO2 emission estimations, with input parameters including the geographic coordinates of point sources, wind vectors from the atmospheric reanalysis of the global climate, and OCO-2 observations. The application of the Gaussian model was improved by using wind data with higher temporal and spatial resolutions, employing the physically based unit conversion method, and interpolating OCO-2 observations into different resolutions. Consequently, CO2 emissions were estimated to be 23.06 ± 2.82 (95% CI) Mt/yr using the Gaussian model and 16.28 Mt/yr using the bottom-up method for the Waigaoqiao Power Plant, and 14.58 ± 3.37 (95% CI) and 14.08 Mt/yr for the Qinbei Power Plant, respectively. These estimates were compared with three standard databases for validation: the Carbon Monitoring for Action database, the China coal-fired Power Plant Emissions Database, and the Carbon Brief database. The comparison found that previous emission inventories spanning different time frames might have overestimated the CO2 emissions of one of two Chinese power plants on the two days that the measurements were made. Our study contributes to quantifying CO2 emissions from point sources and helps in advancing satellite-based monitoring techniques of emission sources in the future; this helps in reducing errors due to human intervention in bottom-up statistical methods.

scholarly journals Comparative Environmental, Economic, and Jobs Impacts in the USA of Renewable Energy Compared to Carbon Capture, Utilization, and Storage

2021 ◽  
pp. 1-7
Author(s):  
Roger H Bezdek ◽  
Keyword(s):  
Renewable Energy ◽  
Environmental Economic ◽  
Power Plant ◽  
Co2 Emissions ◽  
Carbon Capture ◽  
Power Plants ◽  
Economic Benefits ◽  
The Usa ◽  
Coal Power ◽  
And Storage

This paper assesses the relative economic and jobs benefits of retrofitting an 847 MW USA coal power plant with carbon capture, utilization, and storage (CCUS) technology compared to replacing the plant with renewable (RE) energy and battery storage. The research had two major objectives: 1) Estimate the relative environmental, economic, and jobs impacts of CCUS retrofit of the coal plant compared to its replacement by the RE scenario; 2) develop metrics that can be used to compare the jobs impacts of coal fueled power plants to those of renewable energy. The hypotheses tested are: 1) The RE option will reduce CO2 emissions more than the CCUS option. We reject this hypothesis: We found that the CCUS option will reduce CO2 emissions more than the RE option. 2) The RE option will generate greater economic benefits than the CCUS option. We reject this hypothesis: We found that the CCUS option will create greater economic and jobs benefits than the RE option. 3) The RE option will create more jobs per MW than the CCUS option. We reject this hypothesis: We found that the CCUS option will create more jobs per MW more than the RE option. We discuss the implications of these findings.

scholarly journals Tracking city CO<sub>2</sub> emissions from space using a high resolution inverse modeling approach: A case study for Berlin, Germany

2016 ◽  
Author(s):  
Dhanyalekshmi Pillai ◽  
Michael Buchwitz ◽  
Christoph Gerbig ◽  
Thomas Koch ◽  
Maximilian Reuter ◽  
...  
Keyword(s):  
High Resolution ◽  
Co2 Emissions ◽  
Inverse Modeling ◽  
Co2 Emission ◽  
Bayesian Inversion ◽  
Co2 Fluxes ◽  
Modeling Framework ◽  
Worst Case ◽  
Urban Emissions ◽  
The City

Abstract. Currently 52 % of the world's population resides in urban areas and as a consequence, approximately 70 % of fossil fuel emissions of CO2 arise from cities. This fact in combination with large uncertainties associated with quantifying urban emissions due to lack of appropriate measurements makes it crucial to obtain new measurements useful to identify and quantify urban emissions. This is required, for example, for the assessment of emission mitigation strategies and their effectiveness. Here we investigate the potential of a satellite mission like Carbon Monitoring Satellite (CarbonSat), proposed to the European Space Agency (ESA) – to retrieve the city emissions globally, taking into account a realistic description of the expected retrieval errors, the spatiotemporal distribution of CO2 fluxes, and atmospheric transport. To achieve this we use (i) a high-resolution modeling framework consisting of the Weather Research Forecasting model with a greenhouse gas module (WRF-GHG), which is used to simulate the atmospheric observations of column averaged CO2 dry air mole fractions (XCO2), and (ii) a Bayesian inversion method to derive anthropogenic CO2 emissions and their errors from the CarbonSat XCO2 observations. We focus our analysis on Berlin in Germany using CarbonSat's cloud-free overpasses for one reference year. The dense (wide swath) CarbonSat simulated observations with high-spatial resolution (approx. 2 km × 2 km) permits one to map the city CO2 emission plume with a peak enhancement of typically 0.8–1.35 ppm relative to the background. By performing a Bayesian inversion, it is shown that the random error (RE) of the retrieved Berlin CO2 emission for a single overpass is typically less than 8 to 10 MtCO2 yr−1 (about 15 to 20 % of the total city emission). The range of systematic errors (SE) of the retrieved fluxes due to various sources of error (measurement, modeling, and inventories) is also quantified. Depending on the assumptions made, the SE is less than about 6 to 10 MtCO2 yr−1 for most cases. We find that in particular systematic modeling-related errors can be quite high during the summer months due to substantial XCO2 variations caused by biogenic CO2 fluxes at and around the target region. When making the extreme worst-case assumption that biospheric XCO2 variations cannot be modeled at all (which is overly pessimistic), the SE of the retrieved emission is found to be larger than 10 MtCO2 yr−1 for about half of the sufficiently cloud-free overpasses, and for some of the overpasses we found that SE may even be on the order of magnitude of the anthropogenic emission. This indicates that biogenic XCO2 variations cannot be neglected but must be considered during forward and/or inverse modeling. Overall, we conclude that CarbonSat is well suited to obtain city-scale CO2 emissions as needed to enhance our current understanding of anthropogenic carbon fluxes and that CarbonSat or CarbonSat-like satellites should be an important component of a future global carbon emission monitoring system.

scholarly journals Towards space based verification of CO<sub>2</sub> emissions from strong localized sources: fossil fuel power plant emissions as seen by a CarbonSat constellation

2011 ◽  
Vol 4 (4) ◽  
pp. 5147-5182
Author(s):  
V. A. Velazco ◽  
M. Buchwitz ◽  
H. Bovensmann ◽  
M. Reuter ◽  
O. Schneising ◽  
...  
Keyword(s):  
Power Plant ◽  
Systematic Error ◽  
Co2 Emissions ◽  
Power Plants ◽  
Fossil Fuel ◽  
Systematic Errors ◽  
Random Errors ◽  
Power Plant Emissions ◽  
Global Coverage ◽  
Plant Emissions

Abstract. Carbon dioxide (CO2) is the most important man-made greenhouse gas (GHG) that cause global warming. With electricity generation through fossil-fuel power plants now as the economic sector with the largest source of CO2, power plant emissions monitoring has become more important than ever in the fight against global warming. In a previous study done by Bovensmann et al. (2010), random and systematic errors of power plant CO2 emissions have been quantified using a single overpass from a proposed CarbonSat instrument. In this study, we quantify errors of power plant annual emission estimates from a hypothetical CarbonSat and constellations of several CarbonSats while taking into account that power plant CO2 emissions are time-dependent. Our focus is on estimating systematic errors arising from the sparse temporal sampling as well as random errors that are primarily dependent on wind speeds. We used hourly emissions data from the US Environmental Protection Agency (EPA) combined with assimilated and re-analyzed meteorological fields from the National Centers of Environmental Prediction (NCEP). CarbonSat orbits were simulated as a sun-synchronous low-earth orbiting satellite (LEO) with an 828-km orbit height, local time ascending node (LTAN) of 13:30 (01:30 p.m.) and achieves global coverage after 5 days. We show, that despite the variability of the power plant emissions and the limited satellite overpasses, one CarbonSat can verify reported US annual CO2 emissions from large power plants (≥5 Mt CO2 yr−1) with a systematic error of less than ~4.9 % for 50 % of all the power plants. For 90 % of all the power plants, the systematic error was less than ~12.4 %. We additionally investigated two different satellite configurations using a combination of 5 CarbonSats. One achieves global coverage everyday but only samples the targets at fixed local times. The other configuration samples the targets five times at two-hour intervals approximately every 6th day but only achieves global coverage after 5 days. From the statistical analyses, we found, as expected, that the random errors improve by approximately a factor of two if 5 satellites are used. On the other hand, more satellites do not result in a large reduction of the systematic error. The systematic error is somewhat smaller for the CarbonSat constellation configuration achieving global coverage everyday. Finally, we recommend the CarbonSat constellation configuration that achieves daily global coverage.

scholarly journals What would dense atmospheric observation networks bring to the quantification of city CO<sub>2</sub> emissions?

2016 ◽  
Vol 16 (12) ◽  
pp. 7743-7771 ◽  
Author(s):  
Lin Wu ◽  
Grégoire Broquet ◽  
Philippe Ciais ◽  
Valentin Bellassen ◽  
Felix Vogel ◽  
...  
Keyword(s):  
Co2 Emissions ◽  
Metropolitan Area ◽  
Land Surface ◽  
Co2 Emission ◽  
Power Plants ◽  
Lower Cost ◽  
Residential Buildings ◽  
Inversion Method ◽  
Monitoring Tool ◽  
Model Framework

Abstract. Cities currently covering only a very small portion ( <  3 %) of the world's land surface directly release to the atmosphere about 44 % of global energy-related CO2, but they are associated with 71–76 % of CO2 emissions from global final energy use. Although many cities have set voluntary climate plans, their CO2 emissions are not evaluated by the monitoring, reporting, and verification (MRV) procedures that play a key role for market- or policy-based mitigation actions. Here we analyze the potential of a monitoring tool that could support the development of such procedures at the city scale. It is based on an atmospheric inversion method that exploits inventory data and continuous atmospheric CO2 concentration measurements from a network of stations within and around cities to estimate city CO2 emissions. This monitoring tool is configured for the quantification of the total and sectoral CO2 emissions in the Paris metropolitan area (∼  12 million inhabitants and 11.4 TgC emitted in 2010) during the month of January 2011. Its performances are evaluated in terms of uncertainty reduction based on observing system simulation experiments (OSSEs). They are analyzed as a function of the number of sampling sites (measuring at 25 m a.g.l.) and as a function of the network design. The instruments presently used to measure CO2 concentrations at research stations are expensive (typically ∼  EUR 50 k per sensor), which has limited the few current pilot city networks to around 10 sites. Larger theoretical networks are studied here to assess the potential benefit of hypothetical operational lower-cost sensors. The setup of our inversion system is based on a number of diagnostics and assumptions from previous city-scale inversion experiences with real data. We find that, given our assumptions underlying the configuration of the OSSEs, with 10 stations only the uncertainty for the total city CO2 emission during 1 month is significantly reduced by the inversion by ∼  42 %. It can be further reduced by extending the network, e.g., from 10 to 70 stations, which is promising for MRV applications in the Paris metropolitan area. With 70 stations, the uncertainties in the inverted emissions are reduced significantly over those obtained using 10 stations: by 32 % for commercial and residential buildings, by 33 % for road transport, by 18 % for the production of energy by power plants, and by 31 % for total emissions. These results indicate that such a high number of stations would be likely required for the monitoring of sectoral emissions in Paris using this observation–model framework. They demonstrate some high potential that atmospheric inversions can contribute to the monitoring and/or the verification of city CO2 emissions (baseline) and CO2 emission reductions (commitments) and the advantage that could be brought by the current developments of lower-cost medium precision (LCMP) sensors.

Sign in / Sign up

Export Citation Format

Share Document