scholarly journals HARMONIE-AROME single-column tools and experiments

2020 ◽  
Vol 17 ◽  
pp. 255-267
Author(s):  
Emily Gleeson ◽  
Stephen Outten ◽  
Bjørg Jenny Kokkvoll Engdahl ◽  
Eoin Whelan ◽  
Ulf Andrae ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Cloud Microphysics ◽  
Canonical Model ◽  
Prediction System ◽  
Numerical Weather ◽  
Model Configuration ◽  
Single Column ◽  
Transfer Study

Abstract. The single-column version of the shared ALADIN-HIRLAM numerical weather prediction system, called MUSC, was developed by Météo-France in the 2000s and has a growing user-base in both HIRLAM and ALADIN countries. Tools to derive the required input, to run the experiments and to handle outputs of experiments carried out using MUSC have been developed within the HARMONIE-AROME canonical model configuration of the ALADIN-HIRLAM system are described within and constitute a large portion of this paper. The paper also illustrates the usefulness of the single-column approach for testing and developing HARMONIE-AROME physical parametrizations related to cloud microphysics and radiative transfer. Study cases concerning these physical parametrizations have been included for illustration purposes.

scholarly journals Verification of Forecast Weather Surface Variables over Vietnam Using the National Numerical Weather Prediction System

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Tien Du Duc ◽  
Lars Robert Hole ◽  
Duc Tran Anh ◽  
Cuong Hoang Duc ◽  
Thuy Nguyen Ba
Keyword(s):  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Model Performance ◽  
Wrf Model ◽  
Horizontal Resolution ◽  
Prediction System ◽  
Regional Models ◽  
Global Spectral Model ◽  
Numerical Weather ◽  
The Us

The national numerical weather prediction system of Vietnam is presented and evaluated. The system is based on three main models, namely, the Japanese Global Spectral Model, the US Global Forecast System, and the US Weather Research and Forecasting (WRF) model. The global forecast products have been received at 0.25- and 0.5-degree horizontal resolution, respectively, and the WRF model has been run locally with 16 km horizontal resolution at the National Center for Hydro-Meteorological Forecasting using lateral conditions from GSM and GFS. The model performance is evaluated by comparing model output against observations of precipitation, wind speed, and temperature at 168 weather stations, with daily data from 2010 to 2014. In general, the global models provide more accurate forecasts than the regional models, probably due to the low horizontal resolution in the regional model. Also, the model performance is poorer for stations with altitudes greater than 500 meters above sea level (masl). For tropical cyclone performance validations, the maximum wind surface forecast from global and regional models is also verified against the best track of Joint Typhoon Warning Center. Finally, the model forecast skill during a recent extreme rain event in northeast Vietnam is evaluated.

Development of a Fast Three-Dimensional Dynamic Radiative Transfer Solver for Numerical Weather Prediction Models


2021 ◽  
Author(s):  
Richard Maier ◽  
Bernhard Mayer ◽  
Claudia Emde ◽  
Aiko Voigt
Keyword(s):  
Radiative Transfer ◽  
Numerical Weather Prediction ◽  
Prediction Models ◽  
Weather Prediction ◽  
Three Dimensional ◽  
Transfer Model ◽  
Heating Rates ◽  
Time Step ◽  
Numerical Weather ◽  
Numerical Weather Prediction Models

<div> <div> <div> <div> <p>The increasing resolution of numerical weather prediction models makes 3D radiative effects more and more important. These effects are usually neglected by the simple 1D independent column approximations used in most of the current models. On top of that, these 1D radiative transfer solvers are also called far less often than the model’s dynamical core.</p> <p>To address these issues, we present a new „dynamic“ approach of solving 3D radiative transfer. Building upon the existing TenStream solver (Jakub and Mayer, 2015), radiation in this 3D model is not solved completely in each radiation time step, but is rather only transported to adjacent grid boxes. For every grid box, outgoing fluxes are then calculated from the incoming fluxes from the neighboring grid cells of the previous time step. This allows to reduce the computational cost of 3D radiative transfer models to that of current 1D solvers.</p> <p>Here, we show first results obtained with this new solver with a special emphasis on heating rates. Furthermore, we demonstrate issues related to the dynamical treatment of radiation as well as possible solutions to these problems.</p> <p>In the future, the speed of this newly developed 3D dynamic TenStream solver will be further increased by reducing the number of spectral bands used in the radiative transfer calculations with the aim to get a 3D solver that can be called even more frequently than the 1D two-stream solvers used nowadays.</p> <p>Reference:<br><span>Jakub, F. and Mayer, B. (2015), A three-dimensional parallel radiative transfer model for atmospheric heating rates for use in cloud resolving models—The TenStream solver, Journal of Quantitative Spectroscopy and Radiative Transfer, Volume 163, 2015, Pages 63-71, ISSN 0022-4073, . </span></p> </div> </div> </div> </div>

scholarly journals An Evaluation of Radiative Transfer Simulations of Cloudy Scenes from a Numerical Weather Prediction Model at Sub-Millimetre Frequencies Using Airborne Observations

2020 ◽  
Vol 12 (17) ◽  
pp. 2758
Author(s):  
Stuart Fox
Keyword(s):  
Optical Properties ◽  
Radiative Transfer ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Full Range ◽  
Numerical Weather Prediction Model ◽  
Atmospheric Measurements ◽  
Numerical Weather ◽  
Nwp Model ◽  
Cloud Ice

The Ice Cloud Imager (ICI) will be launched on the next generation of EUMETSAT polar-orbiting weather satellites and make passive observations between 183 and 664 GHz which are sensitive to scattering from cloud ice. These observations have the potential to improve weather forecasts through direct assimilation using "all-sky" methods which have been successfully applied to microwave observations up to 200 GHz in current operational systems. This requires sufficiently accurate representations of cloud ice in both numerical weather prediction (NWP) and radiative transfer models. In this study, atmospheric fields from a high-resolution NWP model are used to drive radiative transfer simulations using the Atmospheric Radiative Transfer Simulator (ARTS) and a recently released database of cloud ice optical properties. The simulations are evaluated using measurements between 89 and 874 GHz from five case studies of ice and mixed-phase clouds observed by the Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 research aircraft. The simulations are strongly sensitive to the assumed cloud ice optical properties, but by choosing an appropriate ice crystal model it is possible to simulate realistic brightness temperatures over the full range of sub-millimetre frequencies. This suggests that sub-millimetre observations have the potential to be assimilated into NWP models using the all-sky method.

scholarly journals Use and impact of Arctic observations in the ECMWF Numerical Weather Prediction system

2019 ◽  
Vol 145 (725) ◽  
pp. 3432-3454 ◽  
Author(s):  
Heather Lawrence ◽  
Niels Bormann ◽  
Irina Sandu ◽  
Jonathan Day ◽  
Jacky Farnan ◽  
...  
Keyword(s):  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Prediction System ◽  
Numerical Weather

scholarly journals A fast visible-wavelength 3D radiative transfer model for numerical weather prediction visualization and forward modeling

2020 ◽  
Vol 13 (6) ◽  
pp. 3235-3261
Author(s):  
Steven Albers ◽  
Stephen M. Saleeby ◽  
Sonia Kreidenweis ◽  
Qijing Bian ◽  
Peng Xian ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Radiative Transfer ◽  
Numerical Weather Prediction ◽  
Land Surface ◽  
Weather Prediction ◽  
Lower Boundary ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Numerical Weather ◽  
Visible Wavelength

Abstract. Solar radiation is the ultimate source of energy flowing through the atmosphere; it fuels all atmospheric motions. The visible-wavelength range of solar radiation represents a significant contribution to the earth's energy budget, and visible light is a vital indicator for the composition and thermodynamic processes of the atmosphere from the smallest weather scales to the largest climate scales. The accurate and fast description of light propagation in the atmosphere and its lower-boundary environment is therefore of critical importance for the simulation and prediction of weather and climate. Simulated Weather Imagery (SWIm) is a new, fast, and physically based visible-wavelength three-dimensional radiative transfer model. Given the location and intensity of the sources of light (natural or artificial) and the composition (e.g., clear or turbid air with aerosols, liquid or ice clouds, precipitating rain, snow, and ice hydrometeors) of the atmosphere, it describes the propagation of light and produces visually and physically realistic hemispheric or 360∘ spherical panoramic color images of the atmosphere and the underlying terrain from any specified vantage point either on or above the earth's surface. Applications of SWIm include the visualization of atmospheric and land surface conditions simulated or forecast by numerical weather or climate analysis and prediction systems for either scientific or lay audiences. Simulated SWIm imagery can also be generated for and compared with observed camera images to (i) assess the fidelity and (ii) improve the performance of numerical atmospheric and land surface models. Through the use of the latter in a data assimilation scheme, it can also (iii) improve the estimate of the state of atmospheric and land surface initial conditions for situational awareness and numerical weather prediction forecast initialization purposes.

scholarly journals Sensitivity of Radiative Fluxes to Aerosols in the ALADIN-HIRLAM Numerical Weather Prediction System

Atmosphere ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 205
Author(s):  
Laura Rontu ◽  
Emily Gleeson ◽  
Daniel Martin Perez ◽  
Kristian Pagh Nielsen ◽  
Velle Toll
Keyword(s):  
Optical Properties ◽  
Real Time ◽  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Limited Area ◽  
Prediction System ◽  
Heating Rates ◽  
Radiative Fluxes ◽  
Numerical Weather ◽  
The Impact

The direct radiative effect of aerosols is taken into account in many limited-area numerical weather prediction models using wavelength-dependent aerosol optical depths of a range of aerosol species. We studied the impact of aerosol distribution and optical properties on radiative transfer, based on climatological and more realistic near real-time aerosol data. Sensitivity tests were carried out using the single-column version of the ALADIN-HIRLAM numerical weather prediction system, set up to use the HLRADIA simple broadband radiation scheme. The tests were restricted to clear-sky cases to avoid the complication of cloud–radiation–aerosol interactions. The largest differences in radiative fluxes and heating rates were found to be due to different aerosol loads. When the loads are large, the radiative fluxes and heating rates are sensitive to the aerosol inherent optical properties and the vertical distribution of the aerosol species. In such cases, regional weather models should use external real-time aerosol data for radiation parametrizations. Impacts of aerosols on shortwave radiation dominate longwave impacts. Sensitivity experiments indicated the important effects of highly absorbing black carbon aerosols and strongly scattering desert dust.

Sign in / Sign up

Export Citation Format

Share Document