scholarly journals Urban heat islands in the Arctic cities: an updated compilation of in situ and remote-sensing estimations

2021 ◽  
Vol 18 ◽  
pp. 51-57
Author(s):  
Igor Esau ◽  
Victoria Miles ◽  
Andrey Soromotin ◽  
Oleg Sizov ◽  
Mikhail Varentsov ◽  
...  

Abstract. Persistent warm urban temperature anomalies – urban heat islands (UHIs) – significantly enhance already amplified climate warming in the Arctic. Vulnerability of urban infrastructure in the Arctic cities urges a region-wide study of the UHI intensity and its attribution to UHI drivers. This study presents an overview of the surface and atmospheric UHIs in all circum-Arctic settlements (118 in total) with the population larger than 3000 inhabitants. The surface UHI (SUHI) is obtained from the land surface temperature (LST) data products of the Moderate Resolution Imaging Spectroradiometer (MODIS) archive over 2000–2016. The atmospheric UHI is obtained from screen-level temperature provided by the Urban Heat Island Arctic Research Campaign (UHIARC) observational network over 2015–2018. Several other UHI studies are included for comparisons. The analysis reveals strong and persistent UHI during both summer and winter seasons. The annual mean surface UHI magnitudes vary from −0.6 ∘C (Hammerfest) to 4.3 ∘C (Murmansk). Thus, the observed UHI is likely an important climatic factor that must be included in future adjustment of urban construction, safety, and environmental quality codes.

Author(s):  
Barrak Alahmad ◽  
Linda Powers Tomasso ◽  
Ali Al-Hemoud ◽  
Peter James ◽  
Petros Koutrakis

The global rise of urbanization has led to the formation of surface urban heat islands and surface urban cool islands. Urban heat islands have been shown to increase thermal discomfort, which increases heat stress and heat-related diseases. In Kuwait, a hyper-arid desert climate, most of the population lives in urban and suburban areas. In this study, we characterized the spatial distribution of land surface temperatures and investigated the presence of urban heat and cool effects in Kuwait. We used historical Moderate-Resolution Imaging Spectroradiometer (MODIS) Terra satellite 8-day composite land surface temperature (LST) from 2001 to 2017. We calculated the average LSTs of the urban/suburban governorates and compared them to the average LSTs of the rural and barren lands. We repeated the analysis for daytime and nighttime LST. During the day, the temperature difference (urban/suburban minus versus governorates) was −1.1 °C (95% CI; −1.2, −1.00, p < 0.001) indicating a daytime urban cool island. At night, the temperature difference (urban/suburban versus rural governorates) became 3.6 °C (95% CI; 3.5, 3.7, p < 0.001) indicating a nighttime urban heat island. In light of rising temperatures in Kuwait, this work can inform climate change adaptation efforts in the country including urban planning policies, but also has the potential to improve temperature exposure assessment for future population health studies.


Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1197 ◽  
Author(s):  
Yue Liu ◽  
Hui Li ◽  
Peng Gao ◽  
Cheng Zhong

Many studies have revealed the characteristics and spatial-temporal dynamics of the thermal environment in specific cities or urban agglomerations (UA), as well as the associated determining factors. However, few studies focus on the changing relationships (the difference, distance, interaction, etc.) among inner cities’ heat islands in a UA, which represent not only the detailed dynamics of regional thermal environment (RTE), but also the changing competition and cooperation among cities in a developing UA. In this study, we used Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) products to map and analyze the detailed dynamics of the Beijing-Tianjin-Hebei (BTH) UA thermal environment. From 2001 to 2015, the mean surface urban heat island intensity (SUHII) of the BTH increased significantly, and the surface urban heat islands (SUHIs) in the southern BTH have rapidly increased, expanded and connected, eventually forming a large heat islands agglomeration. According to correlation analysis, urban sprawl probably led to the expansion and enhance of SUHIs in the south plain, while the forest has significantly alleviated urban heat island effect in northern mountains. The results expose the detailed evolution process of BTH thermal environment, and the changing relationships among the inner cities. In a developing UA, mitigation solutions (e.g., ecological corridors or controlling energy consumption) are in demand to stop the formation of a great heat region.


2020 ◽  
Vol 14 (2) ◽  
pp. 5-27
Author(s):  
Ștefănel–Claudiu Crețu ◽  
Pavel Ichim ◽  
Lucian Sfîcă

The paper presents the main features of the urban heat island of Galați city during the summer season for a period of 16 years (2003-2018) using MODIS products. The main objectives were to analyse the extension and geometry of the urban heat island (UHI), its intensity, as well as its connection with land cover. The study is based on LST (Land Surface Temperature), a product obtained from Moderate Resolution Imaging Spectroradiometer (MODIS) sensors located on board of the Terra (EOS AM-1) satellite since 2001 and Aqua (EOS PM-1) satellite since 2003. The boundaries, geometry and spatial extent of the UHI were delimited primarily through the Rodionov test. Through this method, the changing points along four transects over Galați city were identified (North-South, East-West, Northeast-Southwest and Northwest-Southeast) and have been used to delimitate the UHI. Overall, the Galați UHI assessed by satellite information is stronger during the day when the UHI is split in two centres, developed over the industrial area in the west and over the residential part of the town in the east, while during the night the UHI is weaker being developed more clearly over the oldest part of the city. One of the major characteristics of the Galați UHI is that it is highly influenced by the water bodies encircling the city. During the day the intensity of UHI reaches 2-2.5°C while during the night decreases below 2.0°C. The relation of the UHI with land cover and the attenuation of UHI in the surrounding area are also investigated.


Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 410
Author(s):  
Ran Goldblatt ◽  
Abdullah Addas ◽  
Daynan Crull ◽  
Ahmad Maghrabi ◽  
Gabriel Gene Levin ◽  
...  

Urban Heat Islands (UHIs) and Urban Cool Islands (UCIs) can be measured by means of in situ measurements and interpolation methods, which often require densely distributed networks of sensors and can be time-consuming, expensive and in many cases infeasible. The use of satellite data to estimate Land Surface Temperature (LST) and spectral indices such as the Normalized Difference Vegetation Index (NDVI) has emerged in the last decade as a promising technique to map Surface Urban Heat Islands (SUHIs), primarily at large geographical scales. Furthermore, thermal comfort, the subjective perception and experience of humans of micro-climates, is also an important component of UHIs. It remains unanswered whether LST can be used to predict thermal comfort. The objective of this study is to evaluate the accuracy of remotely sensed data, including a derived LST, at a small geographical scale, in the case study of King Abdulaziz University (KAU) campus (Jeddah, Saudi Arabia) and four surrounding neighborhoods. We evaluate the potential use of LST estimates as proxy for air temperature (Tair) and thermal comfort. We estimate LST based on Landsat-8 measurements, Tair and other climatological parameters by means of in situ measurements and subjective thermal comfort by means of a Physiological Equivalent Temperature (PET) model. We find a significant correlation (r = 0.45, p < 0.001) between LST and mean Tair and the compatibility of LST and Tair as equivalent measures using Bland-Altman analysis. We evaluate several models with LST, NDVI, and Normalized Difference Built-up Index (NDBI) as data inputs to proxy Tair and find that they achieve error rates across metrics that are two orders of magnitude below that of a comparison with LST and Tair alone. We also find that, using only remotely sensed data, including LST, NDVI, and NDBI, random forest classifiers can detect sites with “very hot” classification of thermal comfort nearly as effectively as estimates using in situ data, with one such model attaining an F1 score of 0.65. This study demonstrates the potential use of remotely sensed measurements to infer the Physiological Equivalent Temperature (PET) and subjective thermal comfort at small geographical scales as well as the impacts of land cover and land use characteristics on UHI and UCI. Such insights are fundamental for sustainable urban planning and would contribute enormously to urban planning that considers people’s well-being and comfort.


Land ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1315
Author(s):  
Xiaoying Ouyang ◽  
Dongmei Chen ◽  
Shugui Zhou ◽  
Rui Zhang ◽  
Jinxin Yang ◽  
...  

Satellite-derived lake surface water temperature (LSWT) measurements can be used for monitoring purposes. However, analyses based on the LSWT of Lake Ontario and the surrounding land surface temperature (LST) are scarce in the current literature. First, we provide an evaluation of the commonly used Moderate Resolution Imaging Spectroradiometer (MODIS)-derived LSWT/LST (MOD11A1 and MYD11A1) using in situ measurements near the area of where Lake Ontario, the St. Lawrence River and the Rideau Canal meet. The MODIS datasets agreed well with ground sites measurements from 2015–2017, with an R2 consistently over 0.90. Among the different ground measurement sites, the best results were achieved for Hill Island, with a correlation of 0.99 and centered root mean square difference (RMSD) of 0.73 K for Aqua/MYD nighttime. The validated MODIS datasets were used to analyze the temperature trend over the study area from 2001 to 2018, through a linear regression method with a Mann–Kendall test. A slight warming trend was found, with 95% confidence over the ground sites from 2003 to 2012 for the MYD11A1-Night datasets. The warming trend for the whole region, including both the lake and the land, was about 0.17 K year−1 for the MYD11A1 datasets during 2003–2012, whereas it was about 0.06 K year−1 during 2003–2018. There was also a spatial pattern of warming, but the trend for the lake region was not obviously different from that of the land region. For the monthly trends, the warming trends for September and October from 2013 to 2018 are much more apparent than those of other months.


2011 ◽  
Vol 11 (4) ◽  
pp. 12411-12440 ◽  
Author(s):  
A. R. Russell ◽  
A. E. Perring ◽  
L. C. Valin ◽  
E. Bucsela ◽  
E. C. Browne ◽  
...  

Abstract. We present a new retrieval of tropospheric NO2 vertical column density from the Ozone Monitoring Instrument (OMI) based on high spatial and temporal resolution terrain and profile inputs. We find non-negligible impacts on the retrieved NO2 column for terrain pressure (±20%), albedo (±40%), and NO2 vertical profile (−75%–+10%). We compare our NO2 product, the Berkeley High-Resolution (BEHR) product, with operational retrievals and find that the operational retrievals are biased high (30%) over remote areas and biased low (8%) over urban regions. We validate the operational and BEHR products using boundary layer aircraft observations from the Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS-CA) field campaign which occurred in June 2008 in California. Results indicate that columns derived using our boundary layer extrapolation method show good agreement with satellite observations (R2 = 0.65–0.83; N = 68) and provide a more robust validation of satellite-observed NO2 column than those determined using full vertical spirals (R2 = 0.26; N = 5) as in previous work. Agreement between aircraft observations and the BEHR product (R2 = 0.83) is better than agreement with the operational products (R2 = 0.65–0.72). We also show that agreement between satellite and aircraft observations for all products can be further improved (e.g. BEHR: R2 = 0.91) using cloud information from the Moderate Resolution Imaging Spectroradiometer (MODIS) instrument instead of the OMI cloud product. These results indicate that much of the variance in the operational products can be attributed to coarse resolution terrain and profile parameters.


Author(s):  
Дмитрий Владимирович Сарычев ◽  
Ирина Владимировна Попова ◽  
Семен Александрович Куролап

Рассмотрены вопросы мониторинга теплового загрязнения окружающей среды в городах. Представлена методика отбора спектрозональных спутниковых снимков, их обработки и интерпретации полученных результатов. Для оценки городского острова тепла были использованы снимки с космического аппарата Landsat 8 TIRS. На их основе построены карты пространственной структуры острова тепла города Воронежа за летний и зимний периоды. Определены тепловые аномалии и выявлено 11 основных техногенных источников теплового загрязнения в г. Воронеже, установлена их принадлежность к промышленным зонам предприятий, а также к очистным гидротехническим сооружениям. Поверхностные температуры данных источников в среднем были выше фоновых температур приблизительно на 6° зимой и на 15,5° С летом. Синхронно со спутниковой съемкой были проведены наземные контрольные тепловизионные измерения температур основных подстилающих поверхностей в г. Воронеже. Полученные данные показали высокую сходимость космических и наземных измерений, на основании чего сделан вывод о надежности используемых данных дистанционного зондирования Земли в мониторинговых наблюдениях теплового загрязнения городской среды. Результаты работ могут найти применение в городском планировании и медицинской экологии. The study deals with the remote sensing and monitoring of urban heat islands. We present a methodology of multispectral satellite imagery selection and processing. The study bases on the freely available Landsat 8 TIRS data. We used multitemporal thermal band combinations to make maps of the urban heat island of Voronezh (Russia) during summer and winter periods. That let us identify 11 artificial sources of heat in Voronezh. All of them turned out to be allocated within industrial zones of plants and water treatment facilities. Land surface temperatures (LST) of these sources were approximately 6° and 15.5° C above the background temperatures in winter and summer, respectively. To prove the remotely sensed temperatures we conducted ground control measurements of LST of different surface types at the satellite revisit moments. Our results showed a significant correlation between the satellite and ground-based measurements, so the maps we produced in this study should be robust. They are of use in urban planning and medical ecology studies.


2019 ◽  
Vol 5 (4) ◽  
pp. eaau4299 ◽  
Author(s):  
Dan Li ◽  
Weilin Liao ◽  
Angela J. Rigden ◽  
Xiaoping Liu ◽  
Dagang Wang ◽  
...  

More than half of the world’s population now live in cities, which are known to be heat islands. While daytime urban heat islands (UHIs) are traditionally thought to be the consequence of less evaporative cooling in cities, recent work sparks new debate, showing that geographic variations of daytime UHI intensity were largely explained by variations in the efficiency with which urban and rural areas convect heat from the land surface to the lower atmosphere. Here, we reconcile this debate by demonstrating that the difference between the recent finding and the traditional paradigm can be explained by the difference in the attribution methods. Using a new attribution method, we find that spatial variations of daytime UHI intensity are more controlled by variations in the capacity of urban and rural areas to evaporate water, suggesting that strategies enhancing the evaporation capability such as green infrastructure are effective ways to mitigate urban heat.


Sign in / Sign up

Export Citation Format

Share Document