Choosing an optimal β factor for relaxed eddy accumulation applications across vegetated and non-vegetated surfaces

2021 ◽  
Author(s):  
Teresa Vogl ◽  
Amy Hrdina ◽  
Christoph K. Thomas
Keyword(s):  
High Frequency ◽  
Fast Response ◽  
Optimal Choice ◽  
Meteorological Conditions ◽  
Forest Site ◽  
Dry Valleys ◽  
Measured Concentration ◽  
Concentration Difference ◽  
Relaxed Eddy Accumulation ◽  
Wide Range

<p>Understanding the source and transport behavior of atmospheric trace gases is important to better quantify, predict, and mitigate anthropogenic effects on the environment and climate. The relaxed eddy accumulation (REA) method enables measuring the fluxes of atmospheric compounds for which fast-response sensors are not available. In REA applications, air is sampled depending on the direction of the vertical wind w, into a reservoir for updrafts, and a reservoir for downdrafts, respectively. Deadbands are used to select only certain turbulent motions during sampling to obtain the concentration difference. The <em>β</em> factor is used to scale the measured concentration difference between both reservoirs to the flux.</p> <p>In this study, we evaluated a variety of different REA approaches with the goal of formulating recommendations applicable over a wide range of surfaces and meteorological conditions for an optimal choice of the <em>β</em> factor in combination with a suitable deadband. Observations with fast-response sensors were collected in three contrasting ecosystems offering stark differences in scalar transport and dynamics: a mid-latitude grassland ecosystem in Europe (Lindenberg, Germany), a loose gravel surface of the Dry Valleys of Antarctica, and a spruce forest site in the European mid-range mountains (Waldstein, Germany). REA applications were simulated using the high-frequency observations.</p>

Linear Quadratic Gaussian Optimal Controlled Two-Stage Inverter for a High-Frequency AC Distribution Power System

2011 ◽  
Vol 230-232 ◽  
pp. 1287-1292
Author(s):  
Wei Liu ◽  
Zhi Gang Huang ◽  
Zhong Ning Guo
Keyword(s):  
High Frequency ◽  
Fast Response ◽  
Power Converter ◽  
System Stability ◽  
Linear Quadratic ◽  
Linear Quadratic Gaussian ◽  
Two Stage ◽  
Input Line ◽  
Uncertainty Model ◽  
Wide Range

The linear quadratic Gaussian Optimal control of a two-stage HFAC inverter system has been investigated in this paper. The uncertainty model of the high frequency resonant inverter is developed and analyzed with the input line and load variations taken into design considerations. The proposed control scheme has the advantages of fast response for both input line and load perturbations. It also ensures a wide range of system stability and guarantees robustness of the power converter. Both simulations and experimental results are provided to verify with the theoretical analysis through an experimental prototype with an output power of 500-W operating at 10 KHz and an output voltage of 24 V (peak value).

scholarly journals Choosing an optimal <i>β</i> factor for relaxed eddy accumulation applications across vegetated and non-vegetated surfaces

2021 ◽  
Vol 18 (18) ◽  
pp. 5097-5115
Author(s):  
Teresa Vogl ◽  
Amy Hrdina ◽  
Christoph K. Thomas
Keyword(s):  
Detection Limit ◽  
Land Surface ◽  
Turbulent Transport ◽  
Atmospheric Stability ◽  
Forest Site ◽  
Relaxed Eddy Accumulation ◽  
First Case ◽  
Wide Range ◽  
Scalar Similarity ◽  
Method Model

Abstract. Accurately measuring the turbulent transport of reactive and conservative greenhouse gases, heat, and organic compounds between the surface and the atmosphere is critical for understanding trace gas exchange and its response to changes in climate and anthropogenic activities. The relaxed eddy accumulation (REA) method enables measuring the land surface exchange when fast-response sensors are not available, broadening the suite of trace gases that can be investigated. The β factor scales the concentration differences to the flux, and its choice is central to successfully using REA. Deadbands are used to select only certain turbulent motions to compute the flux. This study evaluates a variety of different REA approaches with the goal of formulating recommendations applicable over a wide range of surfaces and meteorological conditions for an optimal choice of the β factor in combination with a suitable deadband. Observations were collected across three contrasting ecosystems offering stark differences in scalar transport and dynamics: a mid-latitude grassland ecosystem in Europe, a loose gravel surface of the Dry Valleys of Antarctica, and a spruce forest site in the European mid-range mountains. We tested a total of four different REA models for the β factor: the first two methods, referred to as model 1 and model 2, derive βp based on a proxy p for which high-frequency observations are available (sensible heat Ts). In the first case, a linear deadband is applied, while in the second case, we are using a hyperbolic deadband. The third method, model 3, employs the approach first published by Baker et al. (1992), which computes βw solely based upon the vertical wind statistics. The fourth method, model 4, uses a constant βp, const derived from long-term averaging of the proxy-based βp factor. Each β model was optimized with respect to deadband size before intercomparison. To our best knowledge, this is the first study intercomparing these different approaches over a range of different sites. With respect to overall REA performance, we found that the βw and constant βp, const performed more robustly than the dynamic proxy-dependent approaches. The latter models still performed well when scalar similarity between the proxy (here Ts) and the scalar of interest (here water vapor) showed strong statistical correlation, i.e., during periods when the distribution and temporal behavior of sources and sinks were similar. Concerning the sensitivity of the different β factors to atmospheric stability, we observed that βT slightly increased with increasing stability parameter z/L when no deadband is applied, but this trend vanished with increasing deadband size. βw was unrelated to dynamic stability and displayed a generally low variability across all sites, suggesting that βw can be considered a site-independent constant. To explain why the βw approach seems to be insensitive towards changes in atmospheric stability, we separated the contribution of w′ kurtosis to the flux uncertainty. For REA applications without deeper site-specific knowledge of the turbulent transport and degree of scalar similarity, we recommend using either the βp, const or βw models when the uncertainty of the REA flux quantification is not limited by the detection limit of the instrument. For conditions when REA sampling differences are close to the instrument's detection limit, the βp models using a hyperbolic deadband are the recommended choice.

scholarly journals Assessing evidence for adaptive evolution in two hearing-related genes important for high-frequency hearing in echolocating mammals

2021 ◽  
Author(s):  
Hui Wang ◽  
Hanbo Zhao ◽  
Yujia Chu ◽  
Jiang Feng ◽  
Keping Sun
Keyword(s):  
Adaptive Evolution ◽  
Hair Cells ◽  
High Frequency ◽  
Phylogenetic Trees ◽  
Outer Hair Cells ◽  
Functional Domain ◽  
Coding Region ◽  
Selective Pressures ◽  
Wide Range ◽  
Different Parts

Abstract High-frequency hearing is particularly important for echolocating bats and toothed whales. Previously, studies of the hearing-related genes Prestin, KCNQ4, and TMC1 documented that adaptive evolution of high-frequency hearing has taken place in echolocating bats and toothed whales. In this study, we present two additional candidate hearing-related genes, Shh and SK2, that may also have contributed to the evolution of echolocation in mammals. Shh is a member of the vertebrate Hedgehog gene family and is required in the specification of the mammalian cochlea. SK2 is expressed in both inner and outer hair cells, and it plays an important role in the auditory system. The coding region sequences of Shh and SK2 were obtained from a wide range of mammals with and without echolocating ability. The topologies of phylogenetic trees constructed using Shh and SK2 were different; however, multiple molecular evolutionary analyses showed that those two genes experienced different selective pressures in echolocating bats and toothed whales compared to non-echolocating mammals. In addition, several nominally significant positively selected sites were detected in the non-functional domain of the SK2 gene, indicating that different selective pressures were acting on different parts of the SK2 gene. This study has expanded our knowledge of the adaptive evolution of high-frequency hearing in echolocating mammals.

Parasites in Antarctic krill guts inferred from DNA sequences

2019 ◽  
Vol 31 (1) ◽  
pp. 16-22 ◽  
Author(s):  
Alison C. Cleary ◽  
Maria C. Casas ◽  
Edward G. Durbin ◽  
Jaime Gómez-Gutiérrez
Keyword(s):  
Dna Sequences ◽  
High Frequency ◽  
Dna Analysis ◽  
Antarctic Krill ◽  
Euphausia Superba ◽  
Gut Contents ◽  
The West ◽  
West Antarctic ◽  
Wide Range

AbstractThe keystone role of Antarctic krill,Euphausia superbaDana, in Southern Ocean ecosystems, means it is essential to understand the factors controlling their abundance and secondary production. One such factor that remains poorly known is the role of parasites. A recent study of krill diet using DNA analysis of gut contents provided a snapshot of the parasites present within 170E. superbaguts in a small area along the West Antarctic Peninsula. These parasites includedMetschnikowiaspp. fungi,Haptoglossasp. peronosporomycetes,LankesteriaandParalecudinaspp. apicomplexa,Stegophorussp. nematodes, andPseudocolliniaspp. ciliates. Of these parasites,Metschnikowiaspp. fungi andPseudocolliniaspp. ciliates had previously been observed inE. superba, as had other genera of apicomplexans, though notLankesteriaandParalecudina.In contrast, nematodes had previously only been observed in eggs ofE. superba, and there are no literature reports of peronosporomycetes in euphausiids.Pseudocolliniaspp., parasitoids which obligately kill their host, were the most frequently observed infection, with a prevalence of 12%. The wide range of observed parasites and the relatively high frequency of infections suggest parasites may play a more important role than previously acknowledged inE. superbaecology and population dynamics.

scholarly journals High frequency and wide range of human kidney papillary crystalline plugs

Urolithiasis ◽  
2017 ◽  
Vol 46 (4) ◽  
pp. 333-341 ◽  
Author(s):  
Léa Huguet ◽  
Marine Le Dudal ◽  
Marine Livrozet ◽  
Dominique Bazin ◽  
Vincent Frochot ◽  
...  
Keyword(s):  
High Frequency ◽  
Human Kidney ◽  
Wide Range

A Geometric Parametric Analysis of a Magnetorheological Engine Mount

2010 ◽  
Author(s):  
Walter Anderson ◽  
Constantine Ciocanel ◽  
Mohammad Elahinia
Keyword(s):  
High Frequency ◽  
New Technology ◽  
Low Frequency ◽  
Variable Stiffness ◽  
Small Displacement ◽  
Element Analysis ◽  
Mr Fluid ◽  
Wide Range ◽  
Engine Mount ◽  
Vehicle Technology

Engine vibration has caused a great deal of research for isolation to be performed. Traditionally, isolation was achieved through the use of pure elastomeric (rubber) mounts. However, with advances in vehicle technology, these types of mounts have become inadequate. The inadequacy stems from the vibration profile associated with the engine, i.e. high displacement at low frequency and small displacement at high frequency. Ideal isolation would be achieved through a stiff mount for low frequency and a soft mount for high frequency. This is contradictory to the performance of the elastomeric mounts. Hydraulic mounts were then developed to address this problem. A hydraulic mount has variable stiffness and damping due to the use of a decoupler and an inertia track. However, further advances in vehicle technology have rendered these mounts inadequate as well. Examples of these advances are hybridization (electric and hydraulic) and cylinder on demand (VCM, MDS & ACC). With these technologies, the vibration excitation has a significantly different profile, occurs over a wide range of frequencies, and calls for a new technology that can address this need. Magnetorheological (MR) fluid is a smart material that is able to change viscosity in the presence of a magnetic field. With the use of MR fluid, variable damping and stiffness can be achieved. An MR mount has been developed and tested. The performance of the mount depends on the geometry of the rubber part as well as the behavior of the MR fluid. The rubber top of the mount is the topic of this study due to its major impact on the isolation characteristics of the MR mount. To develop a design methodology to address the isolation needs of different hybrid vehicles, a geometric parametric finite element analysis has been completed and presented in this paper.

scholarly journals In Situ Vapor Polymerization of Poly(3,4-ethylenedioxythiophene) Coated SnO2-Fe2O3 Continuous Electrospun Nanotubes for Rapid Detection of Iodide Ions

Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2084 ◽  
Author(s):  
Xiuru Xu ◽  
Wei Wang ◽  
Bolun Sun ◽  
Xue Zhang ◽  
Rui Zhao ◽  
...  
Keyword(s):  
In Situ Polymerization ◽  
Fast Response ◽  
Core Shell ◽  
Current Response ◽  
Electrospinning Technique ◽  
Iodide Ions ◽  
Wide Range ◽  
Vapor Phase Polymerization ◽  
Fe2o3 Nanotubes

In this work poly(3,4-ethylenedioxythiophene) (PEDOT) coated SnO2-Fe2O3 continuous nanotubes with a uniform core–shell structure have been demonstrated for rapid sensitive detection of iodide ions. The SnO2-Fe2O3 nanotubes were firstly fabricated via an electrospinning technique and following calcination process. An in situ polymerization approach was then performed to coat a uniform PEDOT shell on the surface of as-prepared SnO2-Fe2O3 nanotubes by vapor phase polymerization, using Fe2O3 on the surface of nanotubes as an oxidant in an acidic condition. The resultant PEDOT@SnO2-Fe2O3 core-shell nanotubes exhibit a fast response time (~4 s) toward iodide ion detection and a linear current response ranging from 10 to 100 μM, with a detection limit of 1.5 μM and sensitivity of 70 μA/mM/cm2. The facile fabrication process and high sensing performance of this study can promote a wide range of potential applications in human health monitoring and biosensing systems.

CLASSICAL-LIKE RESONANCE INDUCED BY NOISE IN A FITZHUGH–NAGUMO NEURON MODEL

1999 ◽  
Vol 09 (12) ◽  
pp. 2295-2303 ◽  
Author(s):  
S. RIPOLL MASSANÉS ◽  
C. J. PÉREZ VICENTE
Keyword(s):  
High Frequency ◽  
Interspike Interval ◽  
Low Frequency ◽  
Resonance Phenomenon ◽  
Characteristic Time Scale ◽  
Wide Range ◽  
External Stimuli ◽  
Interspike Interval Distribution ◽  
Stochastic Resonance Phenomenon ◽  
Interval Distribution

We have studied the stochastic behavior of Fitzhugh–Nagumo neuron-like model (FN) induced by subthreshold external stimuli. Our analysis based on three standard measures: the power spectrum, interspike interval distribution (ISI) and autocorrelation function shows that it is possible to define a characteristic time scale which can be identified in the response of the system for a wide range of frequencies. In contrast to previous studies we have focused our attention on high frequency signals which could be of interest for real systems such as nervous fibers in the auditory system. We report behaviors which resemble those of classical deterministic oscillators but never the stochastic resonance phenomenon typical of low frequency signals.

Design of high-frequency wide-range all digital phase locked loop in 90 nm CMOS

2013 ◽  
Vol 75 (1) ◽  
pp. 133-145 ◽  
Author(s):  
Prashanth Muppala ◽  
Saiyu Ren ◽  
George Yu-Heng Lee
Keyword(s):  
High Frequency ◽  
Phase Locked Loop ◽  
Digital Phase ◽  
Wide Range

Virtual Tissue Cutting With Haptic Feedback Using a Hybrid Actuator With DC Servomotor and Magnetorheological Brake

2016 ◽  
Vol 16 (3) ◽  
Author(s):  
Berk Gonenc ◽  
Hakan Gurocak
Keyword(s):  
Haptic Feedback ◽  
Fast Response ◽  
Virtual Training ◽  
Tissue Properties ◽  
Tissue Cutting ◽  
Wide Range ◽  
Force Profile ◽  
Rat Tissue ◽  
Dc Servomotor ◽  
Hybrid Actuator

Surgical training is an important and recent application where haptic interfaces are used to enhance the realism of virtual training simulators. Tissue cutting with surgical scissors is a common interaction mode in the simulations. The haptic interface needs to render a wide range of tissue properties and resistance forces accurately. In this research, we developed a hybrid haptic device made of a DC servomotor and a magnetorheological (MR) brake. The motor can provide fast dynamic response and compensate for inertia and friction effects of the device. But alone, it cannot supply high force levels and the sensation of stiff interaction with hard tissues such as tendons. On the other hand, the MR-brake can provide very stiff interaction forces yet cannot reflect fast dynamics that are encountered as the virtual scissors go through the tissue. The hybrid actuator developed in this work combines the two based on a control scheme that decomposes the actuator command signal into two branches considering each actuator's capabilities. It is implemented on a compact single degree-of-freedom (DOF) interface to simulate virtual tissue cutting with three different scissor types (Mayo, Metzenbaum, Iris) and four types of rat tissue (liver, muscle, skin, tendon). Results have shown close tracking of the desired force profile in all cases. Compared to just using a DC motor, the hybrid actuator provided a wider range of forces (up to 18 N) with fast response to render quick force variations without any instability for all simulated tissue and scissor types.

Sign in / Sign up

Export Citation Format

Share Document