Microstructural insights into the compressive failure of snow based on a peridynamic framework

Author(s):  
Jonas Ritter ◽  
Henning Löwe ◽  
Michael Zaiser

<p>Highly-porous cohesive granular materials such as snow possess complex modes of failure. Apart from classical failure modes, they show microstructural failure and fragmentation associated with densification within a local, narrow zone. Therefore cracks may form and propagate even under compressive load (‘anticracks’,’compaction bands’). Such failure modes are of importance in a range of geophysical contexts. For instance, they may control the release of snow slab avalanches and influence fracturing of porous rock formations. In the snow context, specific failure mechanisms of the ice matrix and their interplay with the microstructure geometry of snow are still poorly understood. Recently, X-ray computed tomography images have provided insights into snow microstructure and capability of directly simulating its elastic response by the finite element method (FEM). However, apart from thermodynamically driven healing processes the inelastic post-peak behaviour of the microstructure is controlled by localized damage, large deformations and internal contacts. As a result of the well-known limitations of FEM to capture these processes we use Peridynamics (PD) as a non-local continuum method to approach the problem. Due to its formulation, (micro)cracks and damage are emergent features of the problem solution that do not need to be known or located in advance. Furthermore, the Lagrangian character of the governing equations makes the method suitable for simulating large deformations. In this contribution we perform confined uniaxial compression simulations of snow microstructures within a peridynamic framework. Computed tomography images of snow specimen serve as a simulation data base. The obtained results show a novel insight into local failure of snow and allow a better comprehension of the underlying failure mechanisms. This study contributes to improve non-local macroscopic constitutive models for snow for future applications.</p>

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Konstantinos Bakalis ◽  
Athanasia K. Kazantzi ◽  
Dimitrios Vamvatsikos ◽  
Michalis Fragiadakis

A simplified approach is presented for the seismic performance assessment of liquid storage tanks. The proposed methodology relies on a nonlinear static analysis, in conjunction with suitable “strength ratio-ductility-period” relationships, to derive the associated structural demand for the desired range of seismic intensities. In the absence of available relationships that are deemed fit to represent the nonlinear-elastic response of liquid storage tanks, several incremental dynamic analyses are performed for variable post-yield hardening ratios and periods in order to form a set of data that enables the fitting of the response. Following the identification of common modes of failure such as elephant's foot buckling (EFB), base plate plastic rotation, and sloshing wave damage, the aforementioned relationships are employed to derive the 16%, 50%, and 84% percentiles for each of the respective response parameters. Fragility curves are extracted for the considered failure modes, taking special care to appropriately quantify both the median and the dispersion of capacity and demand. A comparison with the corresponding results of incremental dynamic analysis (IDA) reveals that the pushover approach offers a reasonable agreement for the majority of failure modes and limit states considered.


Author(s):  
Bhanu P. Sood ◽  
Michael Pecht ◽  
John Miker ◽  
Tom Wanek

Abstract Schottky diodes are semiconductor switching devices with low forward voltage drops and very fast switching speeds. This paper provides an overview of the common failure modes in Schottky diodes and corresponding failure mechanisms associated with each failure mode. Results of material level evaluation on diodes and packages as well as manufacturing and assembly processes are analyzed to identify a set of possible failure sites with associated failure modes, mechanisms, and causes. A case study is then presented to illustrate the application of a systematic FMMEA methodology to the analysis of a specific failure in a Schottky diode package.


2021 ◽  
Vol 24 ◽  
pp. 100573
Author(s):  
Goli Khaleghi ◽  
Mohammad Hosntalab ◽  
Mahdi Sadeghi ◽  
Reza Reiazi ◽  
Seied Rabi Mahdavi

2020 ◽  
Vol 1 (1) ◽  
pp. 62-70
Author(s):  
Amir H Sadeghi ◽  
Wouter Bakhuis ◽  
Frank Van Schaagen ◽  
Frans B S Oei ◽  
Jos A Bekkers ◽  
...  

Abstract Aims Increased complexity in cardiac surgery over the last decades necessitates more precise preoperative planning to minimize operating time, to limit the risk of complications during surgery and to aim for the best possible patient outcome. Novel, more realistic, and more immersive techniques, such as three-dimensional (3D) virtual reality (VR) could potentially contribute to the preoperative planning phase. This study shows our initial experience on the implementation of immersive VR technology as a complementary research-based imaging tool for preoperative planning in cardiothoracic surgery. In addition, essentials to set up and implement a VR platform are described. Methods Six patients who underwent cardiac surgery at the Erasmus Medical Center, Rotterdam, The Netherlands, between March 2020 and August 2020, were included, based on request by the surgeon and availability of computed tomography images. After 3D VR rendering and 3D segmentation of specific structures, the reconstruction was analysed via a head mount display. All participating surgeons (n = 5) filled out a questionnaire to evaluate the use of VR as preoperative planning tool for surgery. Conclusion Our study demonstrates that immersive 3D VR visualization of anatomy might be beneficial as a supplementary preoperative planning tool for cardiothoracic surgery, and further research on this topic may be considered to implement this innovative tool in daily clinical practice. Lay summary Over the past decades, surgery on the heart and vessels is becoming more and more complex, necessitating more precise and accurate preoperative planning. Nowadays, operative planning is feasible on flat, two-dimensional computer screens, however, requiring a lot of spatial and three-dimensional (3D) thinking of the surgeon. Since immersive 3D virtual reality (VR) is an upcoming imaging technique with promising results in other fields of surgery, we aimed in this study to explore the additional value of this technique in heart surgery. Our surgeons planned six different heart operations by visualizing computed tomography scans with a dedicated VR headset, enabling them to visualize the patient’s anatomy in an immersive and 3D environment. The outcomes of this preliminary study are positive, with a much more reality-like simulation for the surgeon. In such, VR could potentially be beneficial as a preoperative planning tool for complex heart surgery.


Author(s):  
Bardiya Akhbari ◽  
Kalpit N. Shah ◽  
Amy M. Morton ◽  
Janine Molino ◽  
Douglas C. Moore ◽  
...  

Abstract Purpose There is a lack of quantitative research that describes the alignment and, more importantly, the effects of malalignment on total wrist arthroplasty (TWA). The main goal of this pilot study was to assess the alignment of TWA components in radiographic images and compare them with measures computed by three-dimensional analysis. Using these measures, we then determined if malalignment is associated with range of motion (ROM) or clinical outcomes (PRWHE, PROMIS, QuickDash, and grip strength). Methods Six osteoarthritic patients with a single type of TWA were recruited. Radiographic images, computed tomography images, and clinical outcomes of the wrists were recorded. Using posteroanterior and lateral radiographs, alignment measurements were defined for the radial and carpal components. Radiographic measurements were validated with models reconstructed from computed tomography images using Bland–Altman analysis. Biplanar videoradiography (<1mm and <1 degree accuracy) was used to capture and compute ROM of the TWA components. Linear regression assessed the associations between alignment and outcomes. Results Radiographic measures had a 95% limit-of-agreement (mean difference ±  1.96 × SD) of 3 degrees and 3mm with three-dimensional values, except for the measures of the carpal component in the lateral view. In our small cohort, wrist flexion–extension and radial–ulnar deviation were correlated with volar–dorsal tilt and volar–dorsal offset of the radial component and demonstrated a ROM increase of 3.7 and 1.6 degrees per degree increase in volar tilt, and 10.8 and 4.2 degrees per every millimeter increase in volar offset. The carpal component's higher volar tilt was also associated with improvements in patient-reported pain. Conclusions We determined metrics describing the alignment of TWA, and found the volar tilt and volar offset of the radial component could potentially influence the replaced wrist's ROM. Clinical Relevance TWA component alignment can be measured reliably in radiographs, and may be associated with clinical outcomes. Future studies must evaluate its role in a larger cohort.


Sign in / Sign up

Export Citation Format

Share Document