Methodology for Analysis of Schottky Diode Failures

2010 ◽  
Author(s):  
Bhanu P. Sood ◽  
Michael Pecht ◽  
John Miker ◽  
Tom Wanek
Keyword(s):  
Failure Mode ◽  
Schottky Diode ◽  
Failure Modes ◽  
Schottky Diodes ◽  
Failure Mechanisms ◽  
Forward Voltage ◽  
Fast Switching ◽  
Voltage Drops ◽  
The Common

Abstract Schottky diodes are semiconductor switching devices with low forward voltage drops and very fast switching speeds. This paper provides an overview of the common failure modes in Schottky diodes and corresponding failure mechanisms associated with each failure mode. Results of material level evaluation on diodes and packages as well as manufacturing and assembly processes are analyzed to identify a set of possible failure sites with associated failure modes, mechanisms, and causes. A case study is then presented to illustrate the application of a systematic FMMEA methodology to the analysis of a specific failure in a Schottky diode package.

Case Study and Fault Modeling for Wrong Redundancy Evaluation on DRAM Devices

2007 ◽  
Author(s):  
Martin Versen ◽  
Dorina Diaconescu ◽  
Jerome Touzel
Keyword(s):  
Failure Mode ◽  
Failure Modes ◽  
Fault Modeling ◽  
Mode Analysis ◽  
Root Cause ◽  
Failure Mode Analysis

Abstract The characterization of failure modes of DRAM is often straight forward if array related hard failures with specific addresses for localization are concerned. The paper presents a case study of a bitline oriented failure mode connected to a redundancy evaluation in the DRAM periphery. The failure mode analysis and fault modeling focus both on the root-cause and on the test aspects of the problem.

Failure mode and effect analysis (FMEA) to improve collaborative project-based learning: Case study of a Study and Research Path in mechanical engineering

2021 ◽  
pp. 030641902199904
Author(s):  
Elena Bartolomé ◽  
Paula Benítez
Keyword(s):  
Active Learning ◽  
Failure Mode ◽  
Mechanical Engineering ◽  
Failure Modes ◽  
Collaborative Study ◽  
Project Based Learning ◽  
Educational Process ◽  
Effect Analysis ◽  
Questions And Answers

Failure Mode and Effect Analysis (FMEA) is a powerful quality tool, widely used in industry, for the identification of failure modes, their effects and causes. In this work, we investigated the utility of FMEA in the education field to improve active learning processes. In our case study, the FMEA principles were adapted to assess the risk of failures in a Mechanical Engineering course on “Theory of Machines and Mechanisms” conducted through a project-based, collaborative “Study and Research Path (SRP)” methodology. The SRP is an active learning instruction format which is initiated by a generating question that leads to a sequence of derived questions and answers, and combines moments of study and inquiry. By applying the FMEA, the teaching team was able to identify the most critical failures of the process, and implement corrective actions to improve the SRP in the subsequent year. Thus, our work shows that FMEA represents a simple tool of risk assesment which can serve to identify criticality in educational process, and improve the quality of active learning.

Case study application of prevention through design to enhance workplace safety and health in Manitoba heavy construction projects

2019 ◽  
Vol 46 (2) ◽  
pp. 124-133
Author(s):  
Uzo Ezisi ◽  
Mohamed H. Issa
Keyword(s):  
Occupational Health ◽  
Failure Mode ◽  
Failure Modes ◽  
Health And Safety ◽  
Occupational Health And Safety ◽  
Workplace Safety ◽  
Future Research ◽  
Pump Station ◽  
Prevention Through Design

This research aimed to develop a method to facilitate the implementation of prevention through design and apply it to a pump station case study in Manitoba, Canada. The method used, in part, failure mode and effects analysis and involved tasking experts with analyzing the project’s design documents to identify potential occupational health and safety failures that could occur throughout construction. It also entailed analyzing the project’s construction documents to determine actual, design-related, occupational health and safety failures observed throughout construction. The application of the method to that project identified 42 potential failure modes in the design, 38% of which were deemed high-risk. A total of 18 failures were detected throughout construction. Of these, 89% were predicted using failure mode and effects analysis and thus deemed preventable by design, indicating the potential effectiveness of the method. Future research should reapply it to other projects to validate these findings.

Failure Mode and Effect Analysis of a Thermal Power Plant for Enhancing its Reliability

2011 ◽  
Vol 110-116 ◽  
pp. 2969-2975 ◽  
Author(s):  
N.S. Bhangu ◽  
Rupinder Singh ◽  
G.L. Pahuja
Keyword(s):  
Power Plant ◽  
Failure Mode ◽  
Thermal Power Plant ◽  
Failure Modes ◽  
Thermal Power ◽  
Research Work ◽  
Component Level ◽  
Effect Analysis ◽  
Thermal Plant

Failure Mode and Effect Analysis (FMEA) has a well deserved reputation for systematic and thorough evaluation of failures at the system, sub-system or component level in all manufacturing and processing sectors. These organizations are looking for the final product to be “safe and reliable”. FMEA helps designers to identify and eliminate/control dangerous failure modes, minimizing damage to the system and its users. This paper, as an extension to the prior research work, introduces an insight into the reasons of failure and its effects in a thermal power plant opted for the case study, based on conceptual designs in context of FMEA. The analysis takes into account preparation of appropriate diagnostic and maintenance procedures with the aim of enhancement of thermal plant reliability. The FMEA technique used may be helpful for the design and maintenance departments to curtail the downtime of the plant.

Design and Simulation of a Microcontroller Based Loudspeaker Protection System Against Amplifier Direct Current (D.C) Offsets

2016 ◽  
Vol 8 ◽  
pp. 12
Author(s):  
Abiodun Ogunseye ◽  
Olamide Omolara Olusanya
Keyword(s):  
Failure Mode ◽  
Power Amplifier ◽  
Direct Current ◽  
Failure Modes ◽  
Failure Mechanisms ◽  
Protection System ◽  
Amplifier Circuit ◽  
Switching Transistor ◽  
Detection Circuit ◽  
Critical Components

A number of failure mechanisms can result in the damage of loudspeakers that are directly connected to an audio power amplifier system. One of such failure modes occurs when the amplifier circuit develops an output d.c voltage, in which case, the loudspeaker coil will be damaged by overheating. D.c offset detection circuits, usually based on simple transistor circuits are normally used to protect the loudspeaker against this failure mode. However, as effective as they are, these circuits can fail in ways that can result in loudspeaker damage. In this work, a microcontroller based circuit that monitors the critical components of a loudspeaker d.c detection circuit, namely the switching transistor and the isolating relay circuit was developed. The hardware of the developed circuit was modelled with Proteus® software and its firmware was written using MikroC® software. The modelled circuit successfully detects the presence of d.c signals and also reports the states of the isolating relay and the switching transistors when these components fail.

Experimental researches on failure and energy absorption of composite laminated thin-walled structures

2020 ◽  
Vol 54 (27) ◽  
pp. 4253-4268
Author(s):  
Mou Haolei ◽  
Xie Jiang ◽  
Zou Jun ◽  
Feng Zhenyu
Keyword(s):  
Energy Absorption ◽  
Failure Mode ◽  
Specific Energy ◽  
Failure Modes ◽  
Circular Tube ◽  
Failure Mechanisms ◽  
Specific Energy Absorption ◽  
Thin Walled Structures ◽  
Crushing Force ◽  
Thin Walled

To research the failure of carbon fiber-reinforced composite laminated specimens, the tensile tests and compressive tests were conducted for [90]16 and [0]16 specimens, and the shear tests were conducted for [±45]4s specimens, and the microscopic failure mechanisms were observed by scanning electron microscopy. To research the failure and energy absorption of different thin-walled structures with different layups, the quasi-static axial crushing tests were conducted for [±45/0/0/90/0]s and [0/90]3s circular tubes, [0/90]3s and [±45]3s square tubes, [0/90]4s and [±45]4s sinusoidal specimens, and the internal failure were further investigated by 3D X-ray scan. Based on the load-displacement curves, the energy absorptions were evaluated and compared according to specific energy absorption and peak crushing force, and the relationships between failure modes and specific energy absorption, peak crushing force were further researched. The results show that the macroscopic failure modes are the collective results of varieties of microscopic failure mechanisms, such as fiber fracture, matrix deformation and cracking, interlamination and intralamination cracks, cracks propagation, etc. The [±45/0/0/90/0]s circular tube shows the transverse shearing failure mode with high specific energy absorption. The [±45]3s square tube and [±45]3s sinusoidal specimen show the local buckling failure mode with low specific energy absorption. The [0/90]4s sinusoidal specimen, [0/90]3s circular tube, and [0/90]3s square tube show the lamina bending failure mode with medium specific energy absorption. The failure mode of thin-walled structure can be changed by reasonable layups design, and the energy absorption can further be improved.

scholarly journals Failure Mode and Effect Analysis (FMEA) for confectionery manufacturing in developing countries: Turkish delight production as a case study

2012 ◽  
Vol 32 (3) ◽  
pp. 505-514 ◽  
Author(s):  
Sibel Ozilgen
Keyword(s):  
Failure Mode ◽  
Failure Modes ◽  
Chemical Contamination ◽  
Risk Priority Number ◽  
Analysis Model ◽  
Production Potential ◽  
Effect Analysis ◽  
Potential Failure

The Failure Mode and Effect Analysis (FMEA) was applied for risk assessment of confectionary manufacturing, in whichthe traditional methods and equipment were intensively used in the production. Potential failure modes and effects as well as their possible causes were identified in the process flow. Processing stages that involve intensive handling of food by workers had the highest risk priority numbers (RPN = 216 and 189), followed by chemical contamination risks in different stages of the process. The application of corrective actions substantially reduced the RPN (risk priority number) values. Therefore, the implementation of FMEA (The Failure Mode and Effect Analysis) model in confectionary manufacturing improved the safety and quality of the final products.

A High Performance CCM PFC Circuit Using a SiC Schottky Diode and a Si SuperFETTM Switch

2008 ◽  
Vol 600-603 ◽  
pp. 1235-1238
Author(s):  
Won Suk Choi ◽  
Sung Mo Young ◽  
Richard L. Woodin ◽  
A.W. Witt ◽  
J. Shovlin
Keyword(s):  
Schottky Diode ◽  
High Performance ◽  
Schottky Diodes ◽  
Active Power ◽  
Total Power ◽  
System Efficiency ◽  
Power Losses ◽  
Fast Switching ◽  
Switching Characteristics ◽  
Conduction Mode

SuperFETTM MOSFETs and silicon carbide (SiC) Schottky diodes are applied to continuous conduction mode active power factor correction pre-regulators. SuperFETTM MOSFETs can reduce power losses dramatically with their extremely low RDS(ON) and fast switching. The SiC Schottky diode has virtually zero reverse recovery current and high thermal conductivity, and is close to an ideal diode for a CCM PFC circuit. Due to these outstanding switching characteristics, frequency can be increased. In this paper, the SiC Schottky diode’s and SuperFETTM MOSFET’s performance have been verified in a CCM PFC boost converter. These products can reduce the total power losses and enhance the system efficiency.

scholarly journals Failure Mode and Effect Analysis in Automotive Industry: A Case Study

2019 ◽  
Vol 19 (2) ◽  
pp. 10-15
Author(s):  
L. Petrescu ◽  
E. Cazacu ◽  
Maria-Cătălina Petrescu
Keyword(s):  
Failure Mode ◽  
Automotive Industry ◽  
Failure Modes ◽  
Action Plan ◽  
Electronic Devices ◽  
Area Network ◽  
Risk Priority Number ◽  
Effect Analysis ◽  
Iso 26262

AbstractNowadays, Failure Mode and Effect Analysis (FMEA) is more present in any standard evaluation of a product or process. In automotive industry, the IEC 61508 Standard adapted the ISO 26262 restrictions for Electrical and Electronic Devices. Conducting an FMEA reduces the costs by focusing on preventing failures, improving safety and increasing customer satisfaction. This paper presents a case study of a FMEA on a CAN (Controller Area Network) Bus Harness considering the entire process from defining the scope and building the team, to the action plan that will reduce the Risk Priority Number below the acceptable risk value. Also, the brainstorming that identifies the possible failure modes is presented.

Sign in / Sign up

Export Citation Format

Share Document