scholarly journals Assessment of electron density profiles over the Brazilian region using radio occultation data aided by global ionospheric maps

Author(s):  
Gabriel Jerez ◽  
Fabricio Prol ◽  
Daniele Alves ◽  
João Monico ◽  
Manuel Hernández-Pajares

<p>The development of GNSS (Global Navigation Satellite System) and LEO (Low Earth Orbiting) satellites missions enhanced new possibilities of the terrestrial atmosphere probing. The Radio Occultation (RO) technique can be used to retrieve profiles from the neutral and the ionized atmosphere. An important advantage of using RO data is the spatial distribution, which enables global coverage. The signal transmitted by GNSS satellites and tracked by receivers embedded at the LEO satellites is influenced by the atmosphere which causes signal refraction. Due to the signal and atmospheric interaction, instead of a straight line, the signal propagates as a curved line in the path between the transmitter and receiver. The satellites geometry allows the retrieval of atmospheric refractive index, which carries several characteristics from its composition, such as pressure and temperature of the neutral atmosphere, and electron density of the ionosphere. In 1995 GPS/MET (Global Positioning System/Meteorology) experiment was launched to prove the RO concept and, since then, several LEO missions with GNSS receiver embedded were developed, such as CHAMP (Challenging Mini-satellite Payload) (2001-2008), SAC-C (Satélite de Aplicaciones Cientificas-C) (2001-2013) and COSMIC (Constellation Observing System for Meteorology, Ionosphere and Climate) (2006-present). COSMIC is one of the RO missions with the greatest amount of atmospheric data available, mainly taking into account ionospheric information. In the RO technique, in general, the Abel retrieval is used to retrieve the refractive index. The Abel retrieval assumes a spherical symmetry of the atmosphere. When considering the electron density profiles, the main issue is related to regions with large horizontal gradients, where the spherical assumption presents the biggest degradation. In order to improve the ionospheric horizontal gradient used to retrieve electron density profiles, many researches have performed experiments using data from different sources. In this paper, we aimed to assess the electron density profiles over the Brazilian area (equatorial region), characterized by intense ionospheric variability, considering RO data and Global Ionospheric Maps (GIM). The data used is from COSMIC mission, in a period close to the last solar cycle peak (2013-2014). Ionosonde data were used as reference values to assess the RO with GIM aided data. Total Electron Content (TEC) data from GIM were used to estimate the variability of ionosphere between the ionosonde position and the profile locations. This research builds on a preliminary investigation related to the assessment of RO ionospheric profiles over a region under intense ionospheric variability, such as the Brazilian territory. Future works may take into consideration the use of other ionospheric information such as regional ionospheric maps, with higher resolution, and ionospheric tomography.</p>

2020 ◽  
Author(s):  
Jann-Yenq Liu ◽  
Chi-Yen Lin ◽  
Fu-Yuan Chang ◽  
Yuh-Ing Chen

<p>FORMOSAT-7/COSMIC-2 (F7/C2), with the mission orbit of 550 km altitude, 24-deg inclination, and a period of 97 minutes, was launched on 25 June 2019.  Tri-GNSS Radio occultation System (TGRS), Ion Velocity Meter (IVM), and RF beacon onboard F7/C2 six small satellites allow scientists to observe the plasma structure and dynamics in the mid-latitude, low-latitude, and equatorial ionosphere in detail.  F7/C2 TGRS sounds ionospheric RO (radio occultation) electron density profiles, while F7/C2 IVM probes the ion density, ion temperature, and ion velocity at the satellite altitude.  The F7/C2 electron density profiles and the ion density, ion temperature, and ion velocity, as well as the global ionospheric map (GIM) of the total electron content (TEC) derived from global ground-based GPS receivers are used to detect seismo-ionospheric precursors (SIPs) of the 14 November 2019 M7.1 Indonesia Earthquake.  The GIM TEC and F7/C2 RO NmF2 significantly increase specifically over the epicenter on 25-26 October, which indicates SIPs of the 14 November 2019 M7.1 Indonesia Earthquake being detected.  The F7/C2 RO electron density profiles upward motions suggest that the eastward electric fields have been enhanced during the SIP days of the 2019 M7.1 Indonesia earthquake.  The seismo-generated electric fields of the 2019 M7.1 Indonesia earthquake are 0.34-0.64 mV/m eastward.  The results demonstrate that F7/C2 can be employed to detect SIPs in the ionospheric plasma, which shall shed some light on earthquake prediction/forecast.</p>


2010 ◽  
Vol 28 (1) ◽  
pp. 217-222 ◽  
Author(s):  
X. Yue ◽  
W. S. Schreiner ◽  
J. Lei ◽  
S. V. Sokolovskiy ◽  
C. Rocken ◽  
...  

Abstract. This letter reports for the first time the simulated error distribution of radio occultation (RO) electron density profiles (EDPs) from the Abel inversion in a systematic way. Occultation events observed by the COSMIC satellites are simulated during the spring equinox of 2008 by calculating the integrated total electron content (TEC) along the COSMIC occultation paths with the "true" electron density from an empirical model. The retrieval errors are computed by comparing the retrieved EDPs with the "true" EDPs. The results show that the retrieved NmF2 and hmF2 are generally in good agreement with the true values, but the reliability of the retrieved electron density degrades in low latitude regions and at low altitudes. Specifically, the Abel retrieval method overestimates electron density to the north and south of the crests of the equatorial ionization anomaly (EIA), and introduces artificial plasma caves underneath the EIA crests. At lower altitudes (E- and F1-regions), it results in three pseudo peaks in daytime electron densities along the magnetic latitude and a pseudo trough in nighttime equatorial electron densities.


2021 ◽  
Author(s):  
Bruno Nava ◽  
Yenca Migoya-Orue ◽  
Anton Kashcheyev ◽  
Beatriz Sánchez-Cano ◽  
Olivier Witasse ◽  
...  

<p>Radio Occultation (RO) is a very powerful technique to probe a planetary atmosphere, in providing vertical density profiles of the neutral atmosphere and ionosphere. The standard method uses a radio link between a spacecraft and an Earth ground station. Nevertheless, the possibility to obtain information about the Martian atmosphere with mutual RO events, using data from NASA Mars Odyssey and Mars Reconnaissance Orbiters (MRO), has been demonstrated by Ao et al. (2015).<br />Taking advantage of two European spacecraft in orbit around Mars, the European Space Agency is currently preparing experiments of mutual RO between Mars Express (MEX) and the ExoMars Trace Gas Orbiter (TGO). In preparation of MEX and TGO data inversion and analysis, a simulation-based strategy has been adopted and an algorithm able to retrieve vertical electron density profiles from Doppler shift measurements has been implemented and validated. Subsequently, in order to test the mentioned algorithm with experimental data, the same three RO events considered in the paper by Ao et al. (2015) have been processed. In particular, for each RO event, having the information about the satellites’ orbit, the (excess) Doppler shift values corresponding to the Mars Odyssey-MRO ray-paths have been converted to bending angles as a function of impact parameter. Then, assuming a spherical symmetry (Fjeldbo et al., 1971) for the ionosphere electron density, the bending angles have been transformed (through Abel integral) to a vertical refractivity profile, which, in turn, has been converted to an ionospheric electron density profile.<br />In this work, the results obtained by the application of the mentioned inversion algorithm to experimental data will be presented, with particular focus on the retrieval of the ionospheric electron density profiles.</p> <p><strong>References</strong></p> <p>Ao, C. O., C. D. Edwards Jr., D. S. Kahan, X. Pi, S. W. Asmar, and A. J. Mannucci (2015), A first demonstration of Mars crosslink occultation measurements, Radio Sci., 50, 997–1007, doi:10.1002/2015RS005750.</p> <p>Fjeldbo, G., A. J. Kliore, and V. R. Eshleman (1971), The neutral atmosphere of Venus as studied with the Mariner V radio occultation<br />experiments, Astron. J., 76, 123–140.</p>


2020 ◽  
Author(s):  
Wenwen Li ◽  
Min Li ◽  
Qile Zhao ◽  
Chuang Shi ◽  
Rongxin Fang

<p>Electron density profiles (EDP) obtained by GNSS radio occultation (RO) technique can improve the primary ionospheric parameters. However, current studies mainly focused on GNSS RO measurements observed by low Earth orbit satellites, which can only estimate EDP at low altitudes typically below 1000 km. We investigated the GPS RO measurements recorded on the geostationary earth orbit (GEO) satellite TJS-2 (telecommunication technology test satellite II). To improve EDP derivation precision, the total electron content derived from TJS-2 single-frequency excess phase is refined by a moving average filter, which can smooth high-frequency errors and indicate higher precision over the single-difference technique. By comparison with the ground-based digisonde, the IRI 2016 model and the Constellation Observing System for Meteorology, Ionosphere, and Climate satellite (COSMIC) EDPs, the TJS-2 ionospheric EDPs show good agreement with correlation coefficients exceeding 0.8. The TJS-2 average NmF2 differences compared to digisondes and COSMIC results are 12.9% and 1.4%, respectively, while the hmF2 differences are 1.65 km and 1.76 km, respectively. With a GEO satellite such as TJS-2, the side lobe GPS RO signals can also be received, and they are employed to estimate electron densities up to several thousand kilometers in height for the first time in this contribution. Our results also reveal that GEO-based RO signals can estimate EDPs at specific locations with daily repeatability, which makes it a very suitable technique for routinely monitoring EDP variations</p>


2013 ◽  
Vol 13 (2) ◽  
pp. 375-384 ◽  
Author(s):  
Y. B. Yao ◽  
P. Chen ◽  
S. Zhang ◽  
J. J. Chen

Abstract. Observations from the South African TrigNet global navigation satellite system (GNSS) and vertical total electron content (VTEC) data from the Jason-1 satellite were used to analyze the variations in ionospheric electron density profiles over South Africa before and after the severe geomagnetic storms on 15 May 2005. Computerized ionospheric tomography (CIT) was used to inverse the 3-D structure of ionospheric electron density and its response to the magnetic storms. Inversion results showed that electron density significantly increased at 10:00 UT, 15 May compared with that at the same period on 14 May. Positive ionospheric storms were observed in the inversion region during the magnetic storms. Jason-1 data show that the VTEC observed on descending orbits on 15 May significantly increased, whereas that on ascending orbits only minimally changed. This finding is identical to the CIT result.


2013 ◽  
Vol 31 (12) ◽  
pp. 2215-2227 ◽  
Author(s):  
M. Limberger ◽  
W. Liang ◽  
M. Schmidt ◽  
D. Dettmering ◽  
U. Hugentobler

Abstract. Understanding the physical processes within the ionosphere is a key requirement to improve and extend ionospheric modeling approaches. The determination of meaningful parameters to describe the vertical electron density distribution and how they are influenced by the solar activity is an important topic in ionospheric research. In this regard, the F2 layer of the ionosphere plays a key role as it contains the highest concentration of electrons and ions. In this contribution, the maximum electron density NmF2, peak height hmF2 and scale height HF2 of the F2 layer are determined by employing a model approach for regional applications realized by the combination of endpoint-interpolating polynomial B splines with an adapted physics-motivated Chapman layer. For this purpose, electron density profiles derived from ionospheric GPS radio occultation measurements of the satellite missions FORMOSAT-3/COSMIC, GRACE and CHAMP have been successfully exploited. Profiles contain electron density observations at discrete spots, in contrast to the commonly used integrated total electron content from GNSS, and therefore are highly sensitive to obtaining the required information of the vertical electron density structure. The spatio-temporal availability of profiles is indeed rather sparse, but the model approach meets all requirements to combine observation techniques implicating the mutual support of the measurements concerning accuracy, sensitivity and data resolution. For the model initialization and to bridge observation gaps, the International Reference Ionosphere 2007 is applied. Validations by means of simulations and selected real data scenarios show that this model approach has significant potential and the ability to yield reliable results.


2019 ◽  
Vol 16 (4(Suppl.)) ◽  
pp. 1043
Author(s):  
Ali Hussein Ni'ma

It has been shown in ionospheric research that calculation of the total electron content (TEC) is an important factor in global navigation system. In this study, TEC calculation was performed over Baghdad city, Iraq, using a combination of two numerical methods called composite Simpson and composite Trapezoidal methods. TEC was calculated using the line integral of the electron density derived from the International reference ionosphere IRI2012 and NeQuick2 models from 70 to 2000 km above the earth surface. The hour of the day and the day number of the year, R12, were chosen as inputs for the calculation techniques to take into account latitudinal, diurnal and seasonal variation of TEC. The results of latitudinal variation of TEC show anomally called equatorial ionization anomally which presents two crests about the geomagnetic equators. The mean absolute percent errors MAPE for two numerical methods using the electron density profiles shown above were 0.0253, 0.02273 and 0.0213, 0.0124 respectively. The results of seasonal variation of TEC show a larger values for spring and autumn equinoxes other than for summer and winter seasons. The MAPE for autumn equinox has the smallest value than for summer, winter seasons and spring equinox. The MAPE for spring equinox equals to 0.01093 and 0.01015 for Simpson and Trapezoidal methods respectively. For autumn, summer and winter, the MAPE equals to 0.005825 and 0.006629 and 0.04682 and 0.0454, 0.01253 and 0.01231 for Simpson and Trapezoidal methods respectively.


2020 ◽  
Author(s):  
Bruno Nava ◽  
Anton Kashcheyev ◽  
Yenca Migoya-Orue ◽  
Sandro M. Radicella ◽  
Jacob Parrott ◽  
...  

<p>Radio Occultation is a very powerful technique to probe a planetary atmosphere, in providing vertical density profiles of the neutral atmosphere and ionosphere. The standard method uses a radio link at S and/or X band between a spacecraft and an Earth ground station. At Mars, such measurements are conducted since the 60s. The three most recent data sets are from MGS (1998-2006), Mars Express (since 2004) and MAVEN (since 2016). Taking advantage of two European spacecraft in orbit around Mars, the European Space Agency is currently preparing an experiment that consists of mutual radio occultations between Mars Express and the ExoMars Trace Gas Orbiter. Both spacecraft use UHF transceivers that are included primarily for communication between landers on the surface of Mars and the spacecraft, where the spacecraft act as relay orbiters to pass the data from the landers on to Earth. Therefore, these mutual occultations will be performed in the UHF range (centered around a frequency of 400 MHz). The feasibility of this technique on UHF was demonstrated between the NASA Mars Odyssey and Mars Reconnaissance Orbiters [Ao et al., 2015].</p><p>In this presentation, the advantages and challenges of this technique over the traditional spacecraft to Earth occultation measurements, the plans for conducting these experiments with Mars Express and the Trace Gas Orbiter, and the envisaged data processing technique will be briefly reviewed.</p><p>Before the data becomes available, and in order to prepare the data processing, a simulation-based strategy has been adopted to implement an algorithm able to retrieve vertical electron density profiles from Doppler shift measurements. More specifically, as a first step, simulated spacecraft orbits are calculated and a Chapman function is used to obtain the electron density of the Martian ionosphere. Subsequently, a numerical 3D ray-tracing algorithm [Kashcheyev et al., 2012] is applied to compute ray trajectories in the presence of the ionosphere and the relevant Doppler shift time series corresponding to the simulated radio occultation event. Then, assuming a spherical symmetry [Fjeldbo et al., 1971] for the ionosphere electron density, the (excess) Doppler data are converted to bending angles and impact parameters. Finally, the bending angle profile is inverted (through Abel integral) to a vertical refractivity profile, which, in turn, provides information about the ionospheric electron density.</p><p>For completeness, the simulation described above has been carried out with an exponential refractivity function defining the neutral atmosphere alone and with both the Chapman and the exponential refractivity functions to simulate the whole atmosphere of Mars.</p><p>The first results obtained by means of the mentioned approaches will be presented, with particular focus on the retrieval of the ionospheric electron density profiles.</p><p><strong>References</strong></p><p>Ao, C. O., C. D. Edwards Jr., D. S. Kahan, X. Pi, S. W. Asmar, and A. J. Mannucci (2015), A first demonstration of Mars crosslink occultation measurements, Radio Sci., 50, 997–1007, doi:10.1002/2015RS005750.</p><p>Fjeldbo, G., A. J. Kliore, and V. R. Eshleman (1971), The neutral atmosphere of Venus as studied with the Mariner V radio occultation experiments, Astron. J., 76, 123–140.</p><p>Kashcheyev, A., B. Nava, and S. M. Radicella (2012), Estimation of higher-order ionospheric errors in GNSS positioning using a realistic 3-D electron density model, Radio Sci., 47, RS4008, doi:10.1029/2011RS004976</p>


2021 ◽  
Vol 13 (8) ◽  
pp. 1559
Author(s):  
Fabricio S. Prol ◽  
M. Mainul Hoque

A 3D-model approach has been developed to describe the electron density of the topside ionosphere and plasmasphere based on Global Navigation Satellite System (GNSS) measurements onboard low Earth orbit satellites. Electron density profiles derived from ionospheric Radio Occultation (RO) data are extrapolated to the upper ionosphere and plasmasphere based on a linear Vary-Chap function and Total Electron Content (TEC) measurements. A final update is then obtained by applying tomographic algorithms to the slant TEC measurements. Since the background specification is created with RO data, the proposed approach does not require using any external ionospheric/plasmaspheric model to adapt to the most recent data distributions. We assessed the model accuracy in 2013 and 2018 using independent TEC data, in situ electron density measurements, and ionosondes. A systematic better specification was obtained in comparison to NeQuick, with improvements around 15% in terms of electron density at 800 km, 26% at the top-most region (above 10,000 km) and 26% to 55% in terms of TEC, depending on the solar activity level. Our investigation shows that the developed model follows a known variation of electron density with respect to geographic/geomagnetic latitude, altitude, solar activity level, season, and local time, revealing the approach as a practical and useful tool for describing topside ionosphere and plasmasphere using satellite-based GNSS data.


Sign in / Sign up

Export Citation Format

Share Document