DIG: A New Project to De-risk Ireland’s Geothermal Energy Potential 

Author(s):  
Brian O’Reilly ◽  
Duygu Kiyan ◽  
Javier Fullea ◽  
Sergei Lebedev ◽  
Christopher J. Bean ◽  
...  

<p>Potential deep (greater > 400 m) geothermal resources, within low to medium temperature settings remain poorly understood and largely untapped in Europe. DIG (De-risking Ireland’s Geothermal Potential) is a new academic project started in 2020, which aims to develop a better understanding of Ireland’s (all-island) low-enthalpy geothermal energy potential through the gathering, modelling and interpretation of geophysical, geological, and geochemical data.</p><p>The overarching research objectives, are to (i) determine the regional geothermal gradient with uncertainty estimates across Ireland using new and existing geophysical and geochemical-petrophysical data, (ii) investigate the thermochemical crustal structure and secondary fracture porosity in Devonian/Carboniferous siliciclastic and carbonate lithologies using wide-angle seismic, gravity and available geochemical data, and (iii) identify and assess the available low-enthalpy geothermal resources at reservoir scale within the Upper Devonian Munster Basin, i.e. the Mallow warm springs region, using electromagnetic and passive seismic methods, constrained by structural geological mapping results. A new hydrochemistry programme to characterise deep reservoir water composition will add further constraints.</p><p>In the island-scale strand of the project, we are using Rayleigh and Love surface waves in order to determine the seismic-velocity and thermal structure of the lithosphere, with crustal geometry. Together with the legacy surface heat flow, gravity, and newly available long-period MT data, this will place bounds on the shape of regional geotherms. Radiogenic heat production and thermal conductivity measurements for Irish rocks will be incorporated into an integrated geophysical-petrological model, within a scheme able to provide critical temperature uncertainties. Regional-scale research will exploit legacy wide-angle seismic data across the Laurentian and Avalonian geological terranes. Geochemical and petrophysical databases will guide in-house Bayesian inversion tools, to estimate probabilities on model outcomes.</p><p>Local-scale research will derive subsurface electrical conductivity and velocity images from electromagnetic and passive seismic surveys from the northern margin of the Munster Basin, where the thermal waters tend to have a distinctive chemical fingerprint and a meteoric origin based on available geochemical and isotopic compositions. This local focus aims to directly image fault conduits and fluid aquifer sources at depth, within a convective/conductive region associated with warm springs. This will determine the scale of the geothermal anomaly and hence will evaluate the potential for local- and industrial-scale space heating in the survey locality.</p><p>This presentation will give an overview of this new research project and will deliver preliminary multi-parameter crustal models produced by the thermodynamic inversions that fit the surface-wave and surface elevation data. The project is funded by the Sustainable Energy Authority of Ireland under the SEAI Research, Development & Demonstration Funding Programme 2019 (grant number 19/RDD/522) and by the Geological Survey Ireland.</p>

2021 ◽  
Vol 11 (6) ◽  
pp. 2691
Author(s):  
Nataša Ćuković Ignjatović ◽  
Ana Vranješ ◽  
Dušan Ignjatović ◽  
Dejan Milenić ◽  
Olivera Krunić

The study presented in this paper assessed the multidisciplinary approach of geothermal potential in the area of the most southeastern part of the Pannonian basin, focused on resources utilization. This study aims to present a method for the cascade use of geothermal energy as a source of thermal energy for space heating and cooling and as a resource for balneological purposes. Two particular sites were selected—one in a natural environment; the other within a small settlement. Geothermal resources come from different types of reservoirs having different temperatures and chemical compositions. At the first site, a geothermal spring with a temperature of 20.5 °C is considered for heat pump utilization, while at the second site, a geothermal well with a temperature of 54 °C is suitable for direct use. The calculated thermal power, which can be obtained from geothermal energy is in the range of 300 to 950 kW. The development concept was proposed with an architectural design to enable sustainable energy efficient development of wellness and spa/medical facilities that can be supported by local authorities. The resulting energy heating needs for different scenarios were 16–105 kW, which can be met in full by the use of geothermal energy.


2021 ◽  
Vol 9 ◽  
Author(s):  
Randy Koon Koon ◽  
Kalim Shah ◽  
Masaō Ashtine ◽  
Santana Lewis

The energy security of each Caribbean Community (CARICOM) member state is a key issue specifically addressed based on the energy demands of each nation. St. Vincent and the Grenadines (SVG) has the potential to strengthen its energy sector through the exploitation of immense untapped natural geothermal resources. Currently, SVG is planning to integrate base load power through a 10 Megawatt-electric (MWe) geothermal power plant (GPP1). The paper aims to highlight a detailed resource assessment profile of the renewables across SVG and the projected benefits of the proposed 10 MWe geothermal power potential, such as the positive economic development (displacing 149,000 bbls of crude oil), and the transition to a more climate-sensitive nation (displacing an estimated 0.172 million tCO2e/year). In addition, a volumetric method (Monte Carlo simulations) has been applied to reveal that the geothermal reservoir can sustain a minimum of 31 MWe, 34 MWe and 92 MWe over the lifespan of 25–30 years, for well 1 (SVG01), well 2 (SVG02) and well 3 (SVG03) respectively. Given the findings of the assessment and simulations, several policy approaches are identified as potential means of enhancing geothermal resource development and leveraging the resource for the islands’ sustainable energy demands. These include incentivization for public-private partnerships, information certainty, regulatory processes, and strengthened institutions.


2004 ◽  
Vol 4 ◽  
pp. 17-20 ◽  
Author(s):  
Lars Henrik Nielsen ◽  
Anders Mathiesen ◽  
Torben Bidstrup

The Geological Survey of Denmark and Greenland (GEUS) has for many years been involved with research, advisory and consultancy services concerning the assessment of the geothermal energy potential in Denmark, in close cooperation with private and public partners. The Survey’s particular responsibility has been the development of geological models to describe and predict the distribution of sandstone reservoirs suitable for geothermal exploitation. Danish geothermal resources in known sandstone aquifers are estimated to be sufficient to cover household heating requirements in Denmark for more than a century (Sørensen et al. 1998).


Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 706
Author(s):  
Jacek Majorowicz ◽  
Stephen E. Grasby

We summarize the feasibility of using geothermal energy from the Western Canada Sedimentary Basin (WCSB) to support communities with populations >3000 people, including those in northeastern British Columbia, southwestern part of Northwest Territories (NWT), southern Saskatchewan, and southeastern Manitoba, along with previously studied communities in Alberta. The geothermal energy potential of the WCSB is largely determined by the basin’s geometry; the sediments start at 0 m thickness adjacent to the Canadian shield in the east and thicken to >6 km to the west, and over 3 km in the Williston sub-basin to the south. Direct heat use is most promising in the western and southern parts of the WCSB where sediment thickness exceeds 2–3 km. Geothermal potential is also dependent on the local geothermal gradient. Aquifers suitable for heating systems occur in western-northwestern Alberta, northeastern British Columbia, and southwestern Saskatchewan. Electrical power production is limited to the deepest parts of the WCSB, where aquifers >120 °C and fluid production rates >80 kg/s occur (southwestern Northwest Territories, northwestern Alberta, northeastern British Columbia, and southeastern Saskatchewan. For the western regions with the thickest sediments, the foreland basin east of the Rocky Mountains, estimates indicate that geothermal power up to 2 MWel. (electrical), and up to 10 times higher for heating in MWth. (thermal), are possible.


2017 ◽  
Vol 114 ◽  
pp. 7107-7117 ◽  
Author(s):  
Nagasree Garapati ◽  
Benjamin M. Adams ◽  
Jeffrey M. Bielicki ◽  
Philipp Schaedle ◽  
Jimmy B. Randolph ◽  
...  

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Tomasz Maćkowski ◽  
Anna Sowiżdżał ◽  
Anna Wachowicz-Pyzik

The geothermal waters constitute a specific type of water resources, very important from the point of view of their thermal energy potential. This potential, when utilized, supplies an ecological and renewable energy, which, after effective development, brings many environmental, social, and industrial benefits. The key element of any geothermal investment is the proper location of geothermal installation, which would guarantee the relevant hydrogeothermal parameters of the water intake. Hence, many studies and analyses are carried out in order to characterize the reservoir parameters, including the integrated geophysical methods. For decades, the geophysical surveys have been the trusty recognition methods of geological structure and petrophysical parameters of rock formations. Thus, they are widely applied by petroleum industry in exploration of conventional and unconventional (shale gas/oil, tight gas) hydrocarbon deposits. Advances in geophysical methods extended their applicability to many other scientific and industrial branches as, e.g., the seismic survey used in studies of geothermal aquifers. The following paper presents the opportunities provided by seismic methods applied to studies of geothermal resources in the central Poland where the geothermal waters are reservoired in both the Lower Cretaceous and the Lower Jurassic sedimentary successions. The presented results are obtained from a network of seismic profiles. An important advantage of the seismic survey is that they may support the selection of an optimal location of geothermal investment and determination of the geometry of geothermal aquifer. Furthermore, the application of geophysical methods can significantly contribute to the reduction of estimation error of groundwater reservoir temperature.


2020 ◽  
Author(s):  
Hernando Enrique Rodriguez Pantano ◽  
Valentina Betancourt ◽  
Juan S. Solís-Chaves ◽  
C. M. Rocha-Osorio

Colombian geothermal potential for power generation is interesting due to the presence of the three Andean mountain ranges and the existence of active volcanoes in junction with springs and underground reservoirs with the consequent closeness of available hydrothermal water-wells. The Machin volcano is a small mountain placed in the middle of the country, that has a considerable geothermal potential with wells in a temperature range of 160 to 260C. For that reason, a techno-economic simulation for a Geothermal Energy Generation System is proposed in this paper, using for that the System Advisor Model software. The purpose of this research is to present a more encouraging picture for public and private investors interested in exploiting this energy potential in Colombia. Simulation results include technical and economic aspects as annual and monthly energy production, geothermal resource monthly average temperature, and the Time Of Delivery Factors are also considered. Some tables with system configuration, plant and pump costs, Capacity Factor, and real and nominal Levelized Cost of Energy are also shown.


Author(s):  
Alain Ulazia ◽  
Aitor Urresti ◽  
Alvaro Campos ◽  
Gabriel Ibarra-Berastegi ◽  
Mirari Antxustegi ◽  
...  

The students of the Faculties of Engineering of the Universitty of Basque Country (Gipuzkoa-Eibar and Bilbao) in the last years of their studies, before becoming engineers, have the opportunity to select a block of subjects intended to enhance their knowledge on renewable energy systems. One of these subjects is Solar Thermal and Geothermal energy. These subjects are devoted to assessing the renewable energy resource, and designing optimal systems. Apart from the transmission of good practices, the focus is practical and is based on hands-on computer real-life exercises, which involves not only intensive programming using high-level software, but also the spatial representation of results. To that purpose two main open source codes are used: Octave (https://www.gnu.org/software/octave/), and QGIS (https://www.qgis.org/). Students learn how to address real-life problems regarding the geographical representation of solar radiation and low temperature geothermal resources using QGIS, and solar thermal system modelling using Octave.


Sign in / Sign up

Export Citation Format

Share Document