Complex development of underground large-water and geothermal resources reserves: carbon-geothermal energy-technology complexes

2018 ◽  
Vol 12 (59) ◽  
pp. 150-156
Author(s):  
R.I. Pashkevich ◽  
◽  
V.A. Iodis ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 2691
Author(s):  
Nataša Ćuković Ignjatović ◽  
Ana Vranješ ◽  
Dušan Ignjatović ◽  
Dejan Milenić ◽  
Olivera Krunić

The study presented in this paper assessed the multidisciplinary approach of geothermal potential in the area of the most southeastern part of the Pannonian basin, focused on resources utilization. This study aims to present a method for the cascade use of geothermal energy as a source of thermal energy for space heating and cooling and as a resource for balneological purposes. Two particular sites were selected—one in a natural environment; the other within a small settlement. Geothermal resources come from different types of reservoirs having different temperatures and chemical compositions. At the first site, a geothermal spring with a temperature of 20.5 °C is considered for heat pump utilization, while at the second site, a geothermal well with a temperature of 54 °C is suitable for direct use. The calculated thermal power, which can be obtained from geothermal energy is in the range of 300 to 950 kW. The development concept was proposed with an architectural design to enable sustainable energy efficient development of wellness and spa/medical facilities that can be supported by local authorities. The resulting energy heating needs for different scenarios were 16–105 kW, which can be met in full by the use of geothermal energy.


2017 ◽  
Vol 114 ◽  
pp. 7107-7117 ◽  
Author(s):  
Nagasree Garapati ◽  
Benjamin M. Adams ◽  
Jeffrey M. Bielicki ◽  
Philipp Schaedle ◽  
Jimmy B. Randolph ◽  
...  

Author(s):  
Alain Ulazia ◽  
Aitor Urresti ◽  
Alvaro Campos ◽  
Gabriel Ibarra-Berastegi ◽  
Mirari Antxustegi ◽  
...  

The students of the Faculties of Engineering of the Universitty of Basque Country (Gipuzkoa-Eibar and Bilbao) in the last years of their studies, before becoming engineers, have the opportunity to select a block of subjects intended to enhance their knowledge on renewable energy systems. One of these subjects is Solar Thermal and Geothermal energy. These subjects are devoted to assessing the renewable energy resource, and designing optimal systems. Apart from the transmission of good practices, the focus is practical and is based on hands-on computer real-life exercises, which involves not only intensive programming using high-level software, but also the spatial representation of results. To that purpose two main open source codes are used: Octave (https://www.gnu.org/software/octave/), and QGIS (https://www.qgis.org/). Students learn how to address real-life problems regarding the geographical representation of solar radiation and low temperature geothermal resources using QGIS, and solar thermal system modelling using Octave.


2017 ◽  
Vol 5 (7) ◽  
pp. 965-1006 ◽  
Author(s):  
Carola Meller ◽  
Judith Bremer ◽  
Sabine Baur ◽  
Thomas Bergfeldt ◽  
Philipp Blum ◽  
...  

2021 ◽  
Author(s):  
Brian O’Reilly ◽  
Duygu Kiyan ◽  
Javier Fullea ◽  
Sergei Lebedev ◽  
Christopher J. Bean ◽  
...  

<p>Potential deep (greater > 400 m) geothermal resources, within low to medium temperature settings remain poorly understood and largely untapped in Europe. DIG (De-risking Ireland’s Geothermal Potential) is a new academic project started in 2020, which aims to develop a better understanding of Ireland’s (all-island) low-enthalpy geothermal energy potential through the gathering, modelling and interpretation of geophysical, geological, and geochemical data.</p><p>The overarching research objectives, are to (i) determine the regional geothermal gradient with uncertainty estimates across Ireland using new and existing geophysical and geochemical-petrophysical data, (ii) investigate the thermochemical crustal structure and secondary fracture porosity in Devonian/Carboniferous siliciclastic and carbonate lithologies using wide-angle seismic, gravity and available geochemical data, and (iii) identify and assess the available low-enthalpy geothermal resources at reservoir scale within the Upper Devonian Munster Basin, i.e. the Mallow warm springs region, using electromagnetic and passive seismic methods, constrained by structural geological mapping results. A new hydrochemistry programme to characterise deep reservoir water composition will add further constraints.</p><p>In the island-scale strand of the project, we are using Rayleigh and Love surface waves in order to determine the seismic-velocity and thermal structure of the lithosphere, with crustal geometry. Together with the legacy surface heat flow, gravity, and newly available long-period MT data, this will place bounds on the shape of regional geotherms. Radiogenic heat production and thermal conductivity measurements for Irish rocks will be incorporated into an integrated geophysical-petrological model, within a scheme able to provide critical temperature uncertainties. Regional-scale research will exploit legacy wide-angle seismic data across the Laurentian and Avalonian geological terranes. Geochemical and petrophysical databases will guide in-house Bayesian inversion tools, to estimate probabilities on model outcomes.</p><p>Local-scale research will derive subsurface electrical conductivity and velocity images from electromagnetic and passive seismic surveys from the northern margin of the Munster Basin, where the thermal waters tend to have a distinctive chemical fingerprint and a meteoric origin based on available geochemical and isotopic compositions. This local focus aims to directly image fault conduits and fluid aquifer sources at depth, within a convective/conductive region associated with warm springs. This will determine the scale of the geothermal anomaly and hence will evaluate the potential for local- and industrial-scale space heating in the survey locality.</p><p>This presentation will give an overview of this new research project and will deliver preliminary multi-parameter crustal models produced by the thermodynamic inversions that fit the surface-wave and surface elevation data. The project is funded by the Sustainable Energy Authority of Ireland under the SEAI Research, Development & Demonstration Funding Programme 2019 (grant number 19/RDD/522) and by the Geological Survey Ireland.</p>


2020 ◽  
Vol 10 (8) ◽  
pp. 2689 ◽  
Author(s):  
Guopeng Yu ◽  
Zhibin Yu

In response to the twin development challenges of energy shortage and water-scarcity in worldwide arid to semi-arid regions with geothermal resources, a new combined power and freshwater generation system is proposed for geothermal energy utilization. In this system, a total-flow turbine (TF) is employed to be coupled with the traditional single-flash (SF) system and thereafter the coupled TF-SF system is investigated in this work. In addition to power generation, the exhaust steam from turbines are recovered to produce freshwater through condensation. Based on the novel designed system, the production of both power and water are studied under variable wellhead conditions, including variable wellhead pressures, temperatures, mass flowrates, and vapor qualities. The temperature of the separating point at which the total-flow expansion ends and the steam expansion starts is studied for optimal system output. In addition, the efficiency effects of the total-flow turbine on performance of the combined system is also investigated. The power generation comparison shows good power potential of the proposed TF-SF combined system. An effective total-flow turbine with an average efficiency of 65% can lead to an optimal power capacity, exceeding the traditional single-flash (SF) system by 23.7%. Moreover, more than 1/3 of total wellhead discharge can be recovered as desalinated freshwater by the naturally equipped condensation process of the power plant, showing extra benefit from geothermal energy utilization.


Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4476 ◽  
Author(s):  
Yuhao Zhu ◽  
Kewen Li ◽  
Changwei Liu ◽  
Mahlalela Bhekumuzi Mgijimi

Development of geothermal resources on abandoned oil reservoirs is considered environmentally friendly. This method could reduce the rate of energy consumption from oil fields. In this study, the feasibility of geothermal energy recovery based on a deep borehole heat exchanger modified from abandoned oil reservoirs using in situ combustion technology is investigated. This system could produce a large amount of heat compensated by in situ combustion in oil reservoir without directly contacting the formation fluid and affecting the oil production. A coupling strategy between the heat exchange system and the oil reservoir was developed to help avoid the high computational cost while ensuring computational accuracy. Several computational scenarios were performed, and results were obtained and analyzed. The computational results showed that an optimal water injection velocity of 0.06 m/s provides a highest outlet temperature of (165.8 °C) and the greatest power output of (164.6 kW) for a single well in all the performed scenarios. Based on the findings of this study, a geothermal energy production system associated with in situ combustion is proposed, specifically for economic reasons, because it can rapidly shorten the payback period of the upfront costs. Modeling was also performed, and based on the modeling data, the proposed technology has a very short payback period of about 4.5 years and a final cumulative net cash flow of about $4.94 million. In conclusion, the present study demonstrates that utilizing geothermal resources or thermal energy in oilfields by adopting in situ combustion technology for enhanced oil recovery is of great significance and has great economic benefits.


Author(s):  
Alessandro Casasso ◽  
Bruno Piga ◽  
Rajandrea Sethi ◽  
Joerg Prestor ◽  
Simona Pestotnik ◽  
...  

The Alpine regions are deeply involved in the challenge set by climate change, which is a threat for their environment and for important economic activities such as tourism. The heating and cooling of buildings account for a major share of the total primary energy consumption in Europe, and hence the energy policies should focus on this sector to achieve the greenhouse gas reduction targets set by international agreements. Geothermal heat pump is one of the least carbon-intensive technologies for the heating and cooling of buildings. It exploits the heat stored within the ground, a local renewable energy source which is widely available across the Alpine territory. Nevertheless, it has been little considered by European policies and cooperation projects. GRETA (near-surface Geothermal REsources in the Territory of the Alpine space) is a cooperation project funded by the EU INTERREG-Alpine Space program, aiming at demonstrating the potential of shallow geothermal energy and to foster its integration into energy planning instruments. It started in December 2015 and will last three years, involving 12 partners from Italy, France, Switzerland, Germany, Austria, and Slovenia. In this paper, the project is presented, along with the results of the first year of work.


2013 ◽  
Author(s):  
Mark Anthony B. Redo ◽  
Menandro S. Berana

A mathematical model of a heat-driven ejector refrigeration system that uses geothermal energy as the heat source was established. Philippine low-enthalpy geothermal resources were investigated and became the bases in computing for the heat at the generator part of the ejector refrigeration system. Analysis and comparison of the performance of the cycle considering working fluids like ammonia (R717) and R134a as the refrigerants were conducted. The properties of those fluids were based on an available thermodynamic database of various refrigerants. The governing principles and conservation equations for energy, mass and momentum were successively applied to control volume of ejector components. The properties for both fluid and flow were solved iteratively for isentropic and irreversible processes wherein entropy generation and frictional losses were accounted for. This included simulation of flows in two-phase region. Input parameters were set like the generating temperature and condensing temperature. The range of 60 to 100 °C available geothermal fluid temperature could produce 50 to 90°C of generating temperature for the fluid refrigerant. This range of generating temperature yielded an evaporating temperature of 8 to 25 °C at a fixed condensing temperature of 40 °C. After numerical analyses, the determined coefficient of performance was at the range of 0.21 to 0.39, while nozzle and ejector efficiencies were from 94% to 99%. The geometric profiles of the ejector were also projected along with the varying generating temperature for both fluids. From the calculation, ammonia offers higher performance and efficiencies and lower evaporating temperatures suitable for larger cooling needs.


2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Arash Dahi Taleghani

Disposal of produced water and induced earthquakes are two major issues that have endangered development of the geothermal energy as a renewable source of energy. To avoid these problems, circulation of a low-boiling working fluid in a closed loop has been proposed; however; since the major mechanism in this method for heat extraction is conduction rather than convection and additionally the heat conduction is limited to the wellbore surface. To overcome this shortcoming, the formation can be fractured with high conductivity material (for instance, silicon carbide ceramic proppants or cements with silane and silica fume as admixtures) to artificially increase the contact area between the “working fluid” and the reservoir. Our calculations show that fracturing increases the contact area by thousand times, additionally, the fracturing materials reinforce and stressed the formation, which reduce the risk of seismic activity due to temperature or pressure changes of the system during the production.


Sign in / Sign up

Export Citation Format

Share Document