Co-seismic deformation, field observations and seismic fault model of the Oct. 30, 2020 Mw=7.0 Samos earthquake, Aegean Sea

2021 ◽  
Author(s):  
Panagiotis Elias ◽  
Athanassios Ganas ◽  
Pierre Briole ◽  
Sotiris Valkaniotis ◽  
Javier Escartin ◽  
...  
Keyword(s):  
Fault Location ◽  
Normal Fault ◽  
Aegean Sea ◽  
Rock Falls ◽  
Seismic Fault ◽  
Fault Parameters ◽  
Northern Shore ◽  
Loose Sediments ◽  
Dip Angle ◽  
Seismic Deformation

<p>On 30 October 2020 11:51 UTC a large Mw = 7.0 earthquake occurred offshore of the island of Samos, Greece. In this contribution we present the characteristics of the seismic fault (location, geometry, geodetic moment) as inferred from the processing of geodetic data (InSAR and GNSS). We use the InSAR displacement data from Sentinel-1 interferograms (ascending orbit 29 and descending 36) and the GNSS offsets from eleven (11) permanent stations in Greece and Turkey to invert for the fault parameters. Our inversion modeling indicates the activation of a normal fault north of Samos with a length of 32 km, width of 17 km, average slip of 2.1 m, a moderate dip-angle (37°) and with a dip-direction towards North. The inferred fault is located adjacent to Samos northern coastline, with the top of the slip ~1 km below surface, and ~2 km off-shore at its closest to the island. The earthquake caused the permanent uplift of the island up to 10 cm with the exception of a coastal strip along the NE part of the northern shore (near Kokkari) that subsided 2-6 cm. The effects of the earthquake included liquefaction, rock falls, rock slides, road cracks and deep-seated landslides, all due to the strong ground motion and associated down-slope mobilization of soil cover and loose sediments.</p>

Failure Analysis Of Buried Gas Pipelines Crossing Seismic Faults

2020 ◽  
Vol 3 (2) ◽  
pp. 781-790
Author(s):  
M. Rizwan Akram ◽  
Ali Yesilyurt ◽  
A.Can. Zulfikar ◽  
F. Göktepe
Keyword(s):  
Ground Deformation ◽  
Warning System ◽  
Strike Slip ◽  
Gas Pipelines ◽  
Steel Pipes ◽  
Seismic Fault ◽  
Fault Parameters ◽  
Dip Angle ◽  
Permanent Ground Deformation ◽  
Recent Earthquakes

Research on buried gas pipelines (BGPs) has taken an important consideration due to their failures in recent earthquakes. In permanent ground deformation (PGD) hazards, seismic faults are considered as one of the major causes of BGPs failure due to accumulation of impermissible tensile strains. In current research, four steel pipes such as X-42, X-52, X-60, and X-70 grades crossing through strike-slip, normal and reverse seismic faults have been investigated. Firstly, failure of BGPs due to change in soil-pipe parameters have been analyzed. Later, effects of seismic fault parameters such as change in dip angle and angle between pipe and fault plane are evaluated. Additionally, effects due to changing pipe class levels are also examined. The results of current study reveal that BGPs can resist until earthquake moment magnitude of 7.0 but fails above this limit under the assumed geotechnical properties of current study. In addition, strike-slip fault can trigger early damage in BGPs than normal and reverse faults. In the last stage, an early warning system is proposed based on the current procedure. 

scholarly journals Morphotectonic Analysis along the Northern Margin of Samos Island, Related to the Seismic Activity of October 2020, Aegean Sea, Greece

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 102
Author(s):  
Paraskevi Nomikou ◽  
Dimitris Evangelidis ◽  
Dimitrios Papanikolaou ◽  
Danai Lampridou ◽  
Dimitris Litsas ◽  
...  
Keyword(s):  
Fault Zone ◽  
Seismic Activity ◽  
Volcanic Rocks ◽  
Active Tectonics ◽  
Normal Fault ◽  
Aegean Sea ◽  
Northern Margin ◽  
The North ◽  
Eastern Aegean ◽  
Half Graben

On 30 October 2020, a strong earthquake of magnitude 7.0 occurred north of Samos Island at the Eastern Aegean Sea, whose earthquake mechanism corresponds to an E-W normal fault dipping to the north. During the aftershock period in December 2020, a hydrographic survey off the northern coastal margin of Samos Island was conducted onboard R/V NAFTILOS. The result was a detailed bathymetric map with 15 m grid interval and 50 m isobaths and a morphological slope map. The morphotectonic analysis showed the E-W fault zone running along the coastal zone with 30–50° of slope, forming a half-graben structure. Numerous landslides and canyons trending N-S, transversal to the main direction of the Samos coastline, are observed between 600 and 100 m water depth. The ENE-WSW oriented western Samos coastline forms the SE margin of the neighboring deeper Ikaria Basin. A hummocky relief was detected at the eastern margin of Samos Basin probably representing volcanic rocks. The active tectonics characterized by N-S extension is very different from the Neogene tectonics of Samos Island characterized by NE-SW compression. The mainshock and most of the aftershocks of the October 2020 seismic activity occur on the prolongation of the north dipping E-W fault zone at about 12 km depth.

scholarly journals Co-seismic and post-seismic deformation, field observations and fault model of the 30 October 2020 Mw = 7.0 Samos earthquake, Aegean Sea

2021 ◽  
Author(s):  
Athanassios Ganas ◽  
Panagiotis Elias ◽  
Pierre Briole ◽  
Sotiris Valkaniotis ◽  
Javier Escartin ◽  
...  
Keyword(s):  
Aegean Sea ◽  
Fault Model ◽  
Deformation Field ◽  
Field Observations ◽  
Seismic Deformation

Fault parameters determined by near- and far-field data: The Wakasa Bay earthquake of March 26, 1963

1974 ◽  
Vol 64 (5) ◽  
pp. 1369-1382 ◽  
Author(s):  
Katsuyuki Abe
Keyword(s):  
Effective Stress ◽  
Stress Drop ◽  
P Wave ◽  
Slip Angle ◽  
Polarization Angle ◽  
S Wave ◽  
Seismological Data ◽  
Fault Parameters ◽  
Wakasa Bay ◽  
Dip Angle

Abstract The source process of the Wakasa Bay earthquake (M = 6.9, 35.80°N, 135.76°E, depth 4 km) which occurred near the west coast of Honshu Island, Japan, on March 26, 1963, is studied on the basis of the seismological data. Dynamic and static parameters of the faulting are determined by directly comparing synthetic seismograms with observed seismograms recorded at seismic near and far distances. The De Hoop-Haskell method is used for the synthesis. The average dislocation is determined to be 60 cm. The overall dislocation velocity is estimated to be 30 cm/sec, the rise time of the slip dislocation being determined as 2 sec. The other fault parameters determined, with supplementary data on the P-wave first motion, the S-wave polarization angle, and the aftershocks, are: source geometry, dip direction N 144°E, dip angle 68°, slip angle 22° (right-lateral strike-slip motion with some dip-slip component); fault dimension, 20 km length by 8 km width; rupture velocity, 2.3 km/sec (bilateral); seismic moment, 3.3 × 1025 dyne-cm; stress drop, 32 bars. The effective stress available to accelerate the fault motion is estimated to be about 40 bars. The approximate agreement between the effective stress and the stress drop suggests that most of the effective stress was released at the time of the earthquake.

Normal fault growth and segment linkage in a gravitationally detached delta system: evidence from 3D seismic reflection data from the Ceduna Sub-basin, Great Australian Bight

2015 ◽  
Vol 55 (2) ◽  
pp. 467
Author(s):  
Alexander Robson ◽  
Rosalind King ◽  
Simon Holford
Keyword(s):  
Seismic Reflection ◽  
Fault Plane ◽  
Structural Evolution ◽  
Normal Fault ◽  
Fault System ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Listric Fault ◽  
Dip Angle ◽  
Fault Growth

The authors used three-dimensional (3D) seismic reflection data from the central Ceduna Sub-Basin, Australia, to establish the structural evolution of a linked normal fault assemblage at the extensional top of a gravitationally driven delta system. The fault assemblage presented is decoupled at the base of a marine mud from the late Albian age. Strike-linkage has created a northwest–southeast oriented assemblage of normal fault segments and dip-linkage through Santonian strata, which connects a post-Santonian normal fault system to a Cenomanian-Santonian listric fault system. Cenomanian-Santonian fault growth is on the kilometre scale and builds an underlying structural grain, defining the geometry of the post-Santonian fault system. A fault plane dip-angle model has been created and established through simplistic depth conversion. This converts throw into fault plane dip-slip displacement, incorporating increasing heave of a listric fault and decreasing in dip-angle with depth. The analysis constrains fault growth into six evolutionary stages: early Cenomanian nucleation and radial growth of isolated fault segments; linkage of fault segments by the latest Cenomanian; latest Santonian Cessation of fault growth; erosion and heavy incision during the continental break-up of Australia and Antarctica (c. 83 Ma); vertically independent nucleation of the post-Santonian fault segments with rapid length establishment before significant displacement accumulation; and, continued displacement into the Cenozoic. The structural evolution of this fault system is compatible with the isolated fault model and segmented coherent fault model, indicating that these fault growth models do not need to be mutually exclusive to the growth of normal fault assemblages.

scholarly journals Numerical modelling technique for predicting the seismic fault zone (SFZ) in the earthquakes affected area, NW Himalayas with its neotectonic implication

1970 ◽  
Vol 2 (2) ◽  
pp. 57-65
Author(s):  
M Farhad Howladar ◽  
Sharmin Afroz ◽  
Shofiqul Islam
Keyword(s):  
Fault Zone ◽  
Numerical Technique ◽  
Strain Analysis ◽  
Normal Fault ◽  
Focal Mechanism Solution ◽  
Mathematical Form ◽  
Finite Elements Analysis ◽  
Nw Himalaya ◽  
Potential Region ◽  
Seismic Fault

Finite elements analysis is a powerful tool, often used for analyzing problems on stress, that can be successfully employed to analyze the finite deformation of geological structures in a mathematical form on a digital computer. Over the last century, great earthquakes with magnitudes of 7->8 have struck in the NW Himalaya; the 1905 Kangra earthquake is one of them. This study performed a plane strain analysis of failure stress and faults in these earthquakes potential region based on the seismic geologic cross profile employing the two-dimensional finite element method under elastic material state with Mohr Coulomb failure criterion. The results show that the normal fault initiates at deeper level, whereas with increasing convergent displacement the thrust fault appears in the shallower region. The results of the simulation are compared with the available seismic and earthquakes focal mechanism solution data of the area which shows the close similarities between the distribution of simulated fault and microseismicity in the deeper region of Chamba Nappe (CN) and along the upper part of the Mid Crustal Ramp (MCR) which might be the Seismic Fault Zone (SFZ) of the region. Moreover, the intense localization of faults along the frontal part of the model indicates that this part is active in nature at present, which is responsible for the neotectonics in the Himalayas. Keywords: NW Himalaya; numerical technique; seismic fault zone; neotectonics DOI: 10.3329/jles.v2i2.7499 J. Life Earth Sci., Vol. 2(2) 57-65, 2007  

scholarly journals Numerical Modeling of the Interaction of Normal Fault and Shallow Embedded Foundation

2021 ◽  
Author(s):  
Mehdi Ashtiani ◽  
Mohammadreza Jahanshahi Nowkandeh ◽  
Amirmohammad Kayhani
Keyword(s):  
Interaction Mechanism ◽  
Earth Pressure ◽  
Normal Fault ◽  
Shallow Foundation ◽  
Embedment Depth ◽  
Triangular Distribution ◽  
Fault Rupture ◽  
Embedded Foundation ◽  
Loose Soil ◽  
Dip Angle

Abstract The consequences to structures caused by permanent fault displacement has been investigated for dip-slip faulting, but not for the effect of the embedment depth on the interaction between a normal fault rupture and shallow embedded foundation. This study investigated the effect of the embedment depth on the interaction of normal fault rupture and shallow foundation using a numerical model validated with centrifuge experiments. It was found that a gapping interaction mechanism and foundation distress occurred at different foundation positions relative to the fault rupture outcrop for an embedded foundation in comparison with a surface foundation. The extent of this area depended on the combined influences of the foundation position, foundation surcharge, embedment depth, and fault dip angle. The sidewalls of the shallow embedded foundation were observed to act as kinematic constraints and had considerable influence on the rotation and displacement of the foundations. With regard to the level of rotation and displacement of the embedded foundation, the lateral earth pressure distribution on the footwall sidewall was similar to that of Rankine active earth pressure in a triangular distribution and on the hangingwall sidewall as a parabolic distribution of passive earth pressure. Foundations laid on loose soil exhibited less rotation than those on dense soil because the fault ruptures were absorbed or bifurcated around both sides of the foundation.

scholarly journals Tsunami damage estimation in Esmeraldas, Ecuador using fragility functions

2021 ◽  
Vol 7 (4) ◽  
pp. 669-694
Author(s):  
Teresa Vera San Martín ◽  
◽  
Leonardo Gutierrez ◽  
Mario Palacios ◽  
Erick Mas ◽  
...  
Keyword(s):  
Rake Angle ◽  
Fragility Functions ◽  
Damage Estimation ◽  
Coastal Zones ◽  
National Budget ◽  
Tsunami Damage ◽  
Fault Parameters ◽  
Tsunami Risk ◽  
Source Models ◽  
Dip Angle

<abstract> <p>The current study investigated the probable impact from a tsunami to a populated area located along the northwest ecuadorian coast, specifically in the key oil-industrial city of esmeraldas. a numerical tsunami simulation was performed considering the seismological and tectonic aspects of the area. The damage probability was calculated using fragility functions (ffs). Briefly, 16 cases of source models with slightly different fault parameters were tested, where one was selected as the worst scenario of tsunami inundation. This scenario was a hypothetic earthquake case (mw 8.7) located in front of esmeraldas city, approximately 100 km offshore along the ecuador—colombia trench, with three shallow fault segments (top depth of 10 km), a strike aligned with the trench axis, a middle dip angle of 28°, assuming large slips of 5 to 15 m, and a rake angle of 90°. The results from the numerical simulation were comparable to a similar study previously conducted and with those of historically documented data. The tsunami damage estimation using FFs resulted in estimated damages of 50% and 44% in exposed buildings and population, respectively. Results also showed that the most impacted areas were located next to the coastal shoreline and river. tourism, oil exports, and port activities, in general, would be affected in this scenario; thus, compromising important industries that support the national budget. Results from this study would assist in designing or improving tsunami risk reduction strategies, disaster management, use of coastal zones, and planning better policies.</p> </abstract>

scholarly journals Clues to the identification of a seismogenic source from environmental effects: the case of the 1905 Calabria (Southern Italy) earthquake

2009 ◽  
Vol 9 (6) ◽  
pp. 1787-1803 ◽  
Author(s):  
A. Tertulliani ◽  
L. Cucci
Keyword(s):  
Environmental Effects ◽  
Southern Italy ◽  
Environmental Changes ◽  
Source Parameters ◽  
Normal Fault ◽  
Rock Falls ◽  
Offshore Area ◽  
Hydrological Changes ◽  
Seismogenic Source ◽  
Ground Effects

Abstract. The 8 September 1905 Calabria (Southern Italy) earthquake belongs to a peculiar family of highly destructive (I0=XI) seismic events, occurred at the dawning of the instrumental seismology, for which the location, geometry and size of the causative source are still substantially unconstrained. During the century elapsed since the earthquake, previous Authors identified three different epicenters that are more than 50 km apart and proposed magnitudes ranging from M≤6.2 to M=7.9. Even larger uncertainties were found when the geometry of the earthquake source was estimated. In this study, we constrain the magnitude, location and kinematics of the 1905 earthquake through the analysis of the remarkable environmental effects produced by the event (117 reviewed observations at 73 different localities throughout Calabria). The data used in our analysis include ground effects (landslides, rock falls and lateral spreads) and hydrological changes (streamflow variations, liquefaction, rise of water temperature and turbidity). To better define the magnitude of the event we use a number of empirical relations between seismic source parameters and distribution of ground effects and hydrological changes. In order to provide constraints to the location of the event and to the geometry of the source, we reproduce the coseismic static strain associated with different possible 1905 causative faults and compare its pattern to the documented streamflow changes. From the analysis of the seismically-induced environmental changes we find that: 1) the 1905 earthquake had a minimum magnitude M=6.7; 2) the event occurred in an offshore area west of the epicenters proposed by the historical seismic Catalogs; 3) it most likely occurred along a 100° N oriented normal fault with a left-lateral component, consistently with the seismotectonic setting of the area.

Sign in / Sign up

Export Citation Format

Share Document