The Joint ESA-NASA Tropical Campaign Activity – Aeolus Calibration/Validation and Science in the Topics

Author(s):  
Thorsten Fehr ◽  
Gail Skofronick-Jackson ◽  
Vassilis Amiridis ◽  
Jonas von Bismarck ◽  
Shuyi Chen ◽  
...  

<p>The Tropics are covering around 40% of the globe and are home to approximately 40% of the world population. However, numerical weather prediction (NWP) for this region still remains challenging due to the lack of basic observations and incomplete understanding of atmospheric processes, also affecting extratropical storm developments. As a result, the largest impact of the ESA’s Aeolus satellite observations on NWP is expected in the Tropics where only a very limited number of wind profile observations from the ground can be performed.</p><p>An especially important case relating to the predictability of tropical weather system is the outflow of Saharan dust, its interaction with cloud micro-physics and the overall impact on the development of tropical storms over the Atlantic Ocean. The region of the coast of West Africa uniquely allows the study of the Saharan Aerosol layer, African Easterly Waves and Jets, Tropical Easterly Jet, as well as the deep convection in ITCZ and their relation to the formation of convective systems and the transport of dust.</p><p>Together with international partners, ESA and NASA are currently implementing a joint Tropical campaign from July to August 2021 with its base in Cape Verde. The campaign objective is to provide information on the validation and preparation of the ESA missions Aeolus and EarthCARE, respectively, as well as supporting a range of related science objectives for the investigation in the interactions between African Easterly and other tropical waves with the mean flow, dust and their impact on the development of convective systems; the structure and variability of the marine boundary layer in relation to initiation and lifecycle of the convective cloud systems within and across the ITCZ; and impact of wind, aerosol, clouds, and precipitation effects on long range dust transport and air quality over the western Atlantic.</p><p>The campaign comprises a unique combination of both strong airborne and ground-based elements collocated on Cape Verde. The airborne component with wind and aerosol lidars, cloud radars, in-situ instrumentation and additional observations includes the NASA DC-8 with science activities coordinated by the U. of Washington, the German DLR Falcon-20, the French Safire Falcon-20 with activities led by LATMOS, and the Slovenian Aerovizija Advantic WT-10 light aircraft in cooperation with the U. Novo Gorica. The ground-based component led by the National Observatory of Athens is a collaboration of more than 25 European teams providing in-situ and remote sensing aerosol and cloud measurements with a wide range of lidar, radar and radiometer systems, as well as drone observatins by the Cyprus Institute.</p><p>In preparation for the field campaign, the NASA and ESA management and science teams are closely collaborating with regular coordination meetings, in particular in coordinating the shift of the activity by one year due to the COVID-19 pandemic. The time gained has been used to further consolidate the planning, and in particular with a dry-run campaign organized by NASA with European participation where six virtual flights were conducted in July 2020.</p><p> This paper will present a summary of the campaign preparation activities and the consolidated plan for the 2021 Tropical campaign.</p>

2020 ◽  
Author(s):  
Thorsten Fehr ◽  
Vassilis Amiridis ◽  
Sebastian Bley ◽  
Philippe Cocquerez ◽  
Christian Lemmerz ◽  
...  

<p>Since 2007, a series of ESA supported airborne campaigns have been essential to the development of the Aeolus Doppler Wind Lidar satellite mission, which was successfully launched on 22 September 2018 and is providing a novel wind and aerosol profile data.</p><p>A core element of the Aeolus Cal/Val activities is DLR’s A2D wind lidar on-board the DLR Falcon aircraft, an airborne demonstrator for the Aeolus ALADIN satellite instrument flown in combination with the 2-µm Doppler Wind Lidar reference system. Following the pre-launch WindVal-I and –II campaigns in 2015 and 2016, a number of calibration and validation campaigns have been successfully implemented: WindVal-III providing early Cal/Val results in November 2018 only three months after the Aeolus launch, AVATAR-E in May 2019 focussing on the Cal/Val over Central Europe, and AVATAR-I in September 2019 providing Cal/Val information in the North Atlantic and Arctic flying from Iceland.</p><p>The airborne validation is also being supported through balloon flights in the tropical UTLS and lower stratosphere in the frame of the CNES Stratéole-2 stratospheric balloon activities. In the frame of the ESA supported pre-Stratéole-2 campaign, eight stratospheric balloons have been launched from the Seychelles in November/December 2019 providing unique upper level wind data for the Aeolus validation.</p><p>The largest impact of the Aeolus observations is expected in the Tropics, and in particular over the Tropical oceans, where only a limited number of wind profile information is provided by ground based observations. Aeolus provides key direct measurements which are of importance to correctly constrain the wind fields in models. In addition, Aeolus observations have the potential to further enhance our current knowledge on aerosols and clouds by globally providing optical properties products that include atmospheric backscatter and extinction coefficient profiles, lidar ratio profiles and scene classification. In the tropics, a particularly interesting case is the outflow of Saharan dust and its impact on micro-physics in tropical cloud systems. The region off the coast of West Africa allows the study of the Saharan Aerosol layer, African Easterly Waves and Jets, Tropical Easterly Jet, as well as the deep convection in ITCZ. </p><p>Together with international partners, ESA is currently implementing a Tropical campaign in July 2020 with its base in Cape Verde that comprises both airborne and ground-based activities addressing the tropical winds and aerosol validation, as well as science objectives. The airborne component includes the DLR Falcon-20 carrying the A2D and 2-µm Doppler Wind lidars, the NASA P-3 Orion with the DAWN and HALO lidar systems, the APR Ku-, Ka- and W-band Doppler radar and drop sondes, and a Slovenian small aircraft providing in-situ information from aethalometers, nephelometers and optical particle counters. The ground-based component led by the National Observatory of Athens is a collaboration of European teams providing aerosol and cloud measurements with a range of lidar, radar and radiometer systems, as well as a drone providing in-situ aerosol observations. In addition, the participation airborne capabilities by NOAA and LATMOS/Meteo France are currently being investigated.</p><p>This paper will provide a summary of the Aeolus campaign focussing on the planned tropical</p>


Atmosphere ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 503 ◽  
Author(s):  
Karsten Peters ◽  
Cathy Hohenegger ◽  
Daniel Klocke

Representing mesoscale convective systems (MCSs) and their multi-scale interaction with the large-scale atmospheric dynamics is still a major challenge in state-of-the-art global numerical weather prediction (NWP) models. This results in potentially defective forecasts of synoptic-scale dynamics in regions of high MCS activity. Here, we quantify this error by comparing simulations performed with a very large-domain, convection-permitting NWP model to two operational global NWP models relying on parameterized convection. We use one month’s worth of daily forecasts over Western Africa and focus on land regions only. The convection-permitting model matches remarkably well the statistics of westward-propagating MCSs compared to observations, while the convection-parameterizing NWP models misrepresent them. The difference in the representation of MCSs in the different models leads to measurably different synoptic-scale forecast evolution as visible in the wind fields at both 850 and 650 hPa, resulting in forecast differences compared to the operational global NWP models. This is quantified by computing the correlation between the differences and the number of MCSs: the larger the number of MCSs, the larger the difference. This fits the expectation from theory on MCS–mean flow interaction. Here, we show that this effect is strong enough to affect daily limited-area forecasts on very large domains.


Author(s):  
CHRISTOPHER EVANS ◽  
MARIE-LOUISE STIG SØRENSEN ◽  
KONSTANTIN RICHTER

This chapter concerns what is arguably one of the first European-built Christian churches in the Tropics, the N.a S.a da Conceição, in Ribeira Grande (now known as Cidade Velha), the former capital of the Cape Verde Islands. It briefly covers the early history of the town and then proceeds to consider its earliest church. The evidence of historical documents is first outlined, and thereafter the results from the first explorative archaeological investigations focussed on the physical remains of the building are summarised. The excavations were successful in locating the early church, which can now be reconstructed as a large, one-and-a-half or two storey high, east‐west oriented building with a vaulted side-chapel on its northern side and buttressed corners on its western façade. Two tombstones found in situ within the floor confirm that the building dates to, at least, the early 16th century.


2021 ◽  
Author(s):  
Thorsten Fehr ◽  
Vassilis  Amiridis ◽  
Jonas von Bismarck ◽  
Sebastian Bley ◽  
Cyrille Flamant ◽  
...  

<p>ESA supported airborne and ground-based campaigns constitute an essential element in the development and operation of satellite missions, providing the opportunity to test novel observation technologies, acquire representative data for the development of the mission concepts, processors and use cases, as well as in their calibration and validation phases once in orbit.</p><p>For the Aeolus Doppler Wind Lidar satellite mission, ESA has implemented a campaign programme that started in 2007 and has continued beyond the launch of the mission on 22. August 2018. Building on the successful WindVal-I and –II campaigns with DLR’s A2D and 2µm Doppler Wind Lidar systems on-board the DLR Falcon aircraft, a number of validation campaigns have been successfully implemented: WindVal-III in November 2018, AVATAR-E in May 2019, and AVATAR-I in September 2019. In addition, ESA supported the CNES pre-Stratéole-2/TAPAPA campaign with eight stratospheric balloons having been launched from the Seychelles in November/December 2019 providing unique upper level wind data in the Tropics. The validation by stratospheric balloons has been extended in the frame of a collaboration with Loon LLC for a test case covering the months August and September 2019.</p><p>As the largest impact of the Aeolus observations is expected in the Tropics, and in particular over the Tropical oceans, ESA, in close collaboration with NASA and European partners, is currently implementing a Tropical campaign in July 2021.  With its base in Cape Verde the activity comprises both airborne and ground-based activities addressing the tropical winds and aerosol validation, as well as a wide range of science objectives. The location is unique as it allows the study of the Saharan Aerosol layer, African Easterly Waves and Jets, the Tropical Easterly Jet, as well as deep convection in ITCZ and tropical cyclogenesis, with a focus on the impact of Saharan dust on micro-physics in tropical cloud systems. The campaign builds on remote and in-situ observations from aircraft (DLR Falcon-20, the Safire Falcon-20, the NASA DC-8 and an Aerovizija/UNG light aircraft) and drone systems, as well as an extensive aerosol and cloud measurement programme with a range of lidar, radar and radiometer systems coordinated by NOA.</p><p>This paper will provide a summary of the Aeolus campaign activities, focussing on the completed and planned post launch campaigns.</p>


2020 ◽  
Author(s):  
Arnoud Apituley ◽  
Karin Kreher ◽  
Ankie Piters ◽  
John Sullivan ◽  
Michel vanRoozendael ◽  
...  

<p>For the validation of Sentinel-5p/TROPOMI the TROpomi vaLIdation eXperiment (TROLIX) was held in the Netherlands based at the Cabauw Experimental Site for Atmospheric Research during September 2019. TROLIX consisted of active and passive remote sensing platforms in conjunction with several balloon-borne and surface measurements.</p><p>The intensive observations will serve to establish the quality of TROPOMI L2 main data products (UVAI, Aerosol Layer Height, NO<sub>2</sub>, O<sub>3</sub>, HCHO, Clouds) under realistic conditions with varying cloud cover and a wide range of atmospheric conditions.</p><p>Since TROPOMI is a hyperspectral imager with a very high spatial resolution of 3.6 x 5.6 km<sup>2</sup>, understanding local effects such as inhomogeneous sources of pollution, sub-pixel clouds and variations in ground albedo is important to interpret TROPOMI results. Therefore, the campaign included sub-pixel resolution local networks of sensors, involving MAXDOAS and Pandora instruments, around Cabauw (rural) and within the city of Rotterdam (urban). Utilising its comprehensive in-situ and remote sensing observation program in and around the 213 m meteorological tower, Cabauw was the main site of the campaign with focus on vertical profiling using lidar instruments for aerosols, clouds, water vapor, tropospheric and stratospheric ozone, as well as balloon-borne sensors for NO<sub>2</sub> and ozone.</p><p>The data set collected can be directly compared to the TROPOMI L2 data products, while measurements of parameters related to a-priori data and auxiliary parameters that infuence the quality of the L2 products such as aerosol and cloud profiles and in-situ aerosol and atmospheric chemistry were also collected.</p><p>This paper gives an overview of the campaign, and an overview of the participating main and ancillary instrumentation and preliminary results.</p><p>Future activities include the deployment in 2020 of an airborne hyperspectral imager.</p>


Author(s):  
W. E. King

A side-entry type, helium-temperature specimen stage that has the capability of in-situ electrical-resistivity measurements has been designed and developed for use in the AEI-EM7 1200-kV electron microscope at Argonne National Laboratory. The electrical-resistivity measurements complement the high-voltage electron microscope (HVEM) to yield a unique opportunity to investigate defect production in metals by electron irradiation over a wide range of defect concentrations.A flow cryostat that uses helium gas as a coolant is employed to attain and maintain any specified temperature between 10 and 300 K. The helium gas coolant eliminates the vibrations that arise from boiling liquid helium and the temperature instabilities due to alternating heat-transfer mechanisms in the two-phase temperature regime (4.215 K). Figure 1 shows a schematic view of the liquid/gaseous helium transfer system. A liquid-gas mixture can be used for fast cooldown. The cold tip of the transfer tube is inserted coincident with the tilt axis of the specimen stage, and the end of the coolant flow tube is positioned without contact within the heat exchanger of the copper specimen block (Fig. 2).


2013 ◽  
Vol 16 (1) ◽  
pp. 59-67

<p>The Soil Science Institute of Thessaloniki produces new digitized Soil Maps that provide a useful electronic database for the spatial representation of the soil variation within a region, based on in situ soil sampling, laboratory analyses, GIS techniques and plant nutrition mathematical models, coupled with the local land cadastre. The novelty of these studies is that local agronomists have immediate access to a wide range of soil information by clicking on a field parcel shown in this digital interface and, therefore, can suggest an appropriate treatment (e.g. liming, manure incorporation, desalination, application of proper type and quantity of fertilizer) depending on the field conditions and cultivated crops. A specific case study is presented in the current work with regards to the construction of the digitized Soil Map of the regional unit of Kastoria. The potential of this map can easily be realized by the fact that the mapping of the physicochemical properties of the soils in this region provided delineation zones for differential fertilization management. An experiment was also conducted using remote sensing techniques for the enhancement of the fertilization advisory software database, which is a component of the digitized map, and the optimization of nitrogen management in agricultural areas.</p>


2020 ◽  
Vol 24 (8) ◽  
pp. 900-908
Author(s):  
Ram Naresh Yadav ◽  
Amrendra K Singh ◽  
Bimal Banik

Numerous O (oxa)- and S (thia)-glycosyl esters and their analogous glycosyl acids have been accomplished through stereoselective glycosylation of various peracetylated bromo sugar with benzyl glycolate using InBr3 as a glycosyl promotor followed by in situ hydrogenolysis of resulting glycosyl ester. A tandem glycosylating and hydrogenolytic activity of InBr3 has been successfully investigated in a one-pot procedure. The resulting synthetically valuable and virtually unexplored class of β-CMGL (glycosyl acids) could serve as an excellent potential chiral auxiliary in the asymmetric synthesis of a wide range of enantiomerically pure medicinally prevalent β-lactams and other bioactive molecules of diverse medicinal interest.


Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1031
Author(s):  
Joseba Gorospe ◽  
Rubén Mulero ◽  
Olatz Arbelaitz ◽  
Javier Muguerza ◽  
Miguel Ángel Antón

Deep learning techniques are being increasingly used in the scientific community as a consequence of the high computational capacity of current systems and the increase in the amount of data available as a result of the digitalisation of society in general and the industrial world in particular. In addition, the immersion of the field of edge computing, which focuses on integrating artificial intelligence as close as possible to the client, makes it possible to implement systems that act in real time without the need to transfer all of the data to centralised servers. The combination of these two concepts can lead to systems with the capacity to make correct decisions and act based on them immediately and in situ. Despite this, the low capacity of embedded systems greatly hinders this integration, so the possibility of being able to integrate them into a wide range of micro-controllers can be a great advantage. This paper contributes with the generation of an environment based on Mbed OS and TensorFlow Lite to be embedded in any general purpose embedded system, allowing the introduction of deep learning architectures. The experiments herein prove that the proposed system is competitive if compared to other commercial systems.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Sungmin O. ◽  
Rene Orth

AbstractWhile soil moisture information is essential for a wide range of hydrologic and climate applications, spatially-continuous soil moisture data is only available from satellite observations or model simulations. Here we present a global, long-term dataset of soil moisture derived through machine learning trained with in-situ measurements, SoMo.ml. We train a Long Short-Term Memory (LSTM) model to extrapolate daily soil moisture dynamics in space and in time, based on in-situ data collected from more than 1,000 stations across the globe. SoMo.ml provides multi-layer soil moisture data (0–10 cm, 10–30 cm, and 30–50 cm) at 0.25° spatial and daily temporal resolution over the period 2000–2019. The performance of the resulting dataset is evaluated through cross validation and inter-comparison with existing soil moisture datasets. SoMo.ml performs especially well in terms of temporal dynamics, making it particularly useful for applications requiring time-varying soil moisture, such as anomaly detection and memory analyses. SoMo.ml complements the existing suite of modelled and satellite-based datasets given its distinct derivation, to support large-scale hydrological, meteorological, and ecological analyses.


Sign in / Sign up

Export Citation Format

Share Document