Comparative study of Cs-137 activity concentration between attic dust and urban soil from Salgotarjan city, Hungary

Author(s):  
Davaakhuu Tserendorj ◽  
Katalin Zsuzsanna Szabó Szabó ◽  
Peter Völgyesi Völgyesi ◽  
Gorkhmaz Abbaszade ◽  
Do Le Tan Tan ◽  
...  

<p>The <sup>137</sup>Cs (t<sub>1/2</sub> =30 years) is a principal radioisotope that was artificially introduced into the environment through the atmospheric bomb tests took place from the middle of the 1940s to the 1980s and from the major nuclear accidents (i.e., Chernobyl, 1986 and Fukushima, 2011). From the atmosphere, <sup>137</sup>Cs easily adsorbs to particles and it returns to lithosphere (pedosphere) by wet and dry deposition as a radioactive fallout component. Due to the Chernobyl nuclear accident, the released contaminated air mass, containing Cs-137, largely propagated, deposited, and distributed across several European countries in the ambient environment (Balonov et al., 1996). These particles also reached houses (e.g. through open windows, cracks, and vents) in an urban environment and deposited inside resulting in the exposition of the habitants to <sup>137</sup>Cs, especially in areas that are not accessible for a regular cleaning like attics. Following the nuclear accidents, primary attention was drawn to agricultural areas and less attention was paid to urban environments. Accordingly, the goal of this study is to compare the <sup>137</sup>Cs activity in attic dust as undisturbed samples, and urban soils as disturbed environmental materials to determine the <sup>137</sup>Cs distribution in urban environment. </p><p>Attic dust (AD) samples were collected from 14 houses, which were built between 1900 and 1990 14 urban soil (US) samples were collected nearby the houses at a depth of 0-15 cm in Salgótarján, a former industrial city. To obtain a representative local undisturbed soil sample, a forest soil sample was collected from the upwind direction (NW) of the city. To check the <sup>137</sup>Cs content of the local industrial waste material, we also collected fly-ash slag sample from a waste dump.   AD and US samples were analyzed by a well-type HPGe and with an n-type coaxial HPGe detector in a low background iron chamber, respectively.</p><p>Cs-137 activity in the studied AD ranges from 5.51±0.9 to 165.9±3.6 Bq kg<sup>-1, </sup>with a mean value of 75.4±2.5 Bq kg<sup>-1 </sup>(decay corrected in 2016). In contrast, US samples show <sup>137</sup>Cs activity ranging between 2.3±0.4 and 13.6±0.6 Bq kg<sup>-1</sup>.  The brown forest soil sample has elevated <sup>137</sup>Cs activity concentration (18.5<strong>±</strong>0.6 Bq kg<sup>-1</sup>), compared to the urban soils. The fly-ash slags activity is below the detection limit (0.7±0.5 Bq kg<sup>-1</sup>).</p><p>The average <sup>137</sup>Cs activity in AD is ~15 times higher than that of US. This result clearly indicates that attic area provides a protected (hardly or unchanged) environment, therefore physical condition of the dust remains constant in time, and there is a small chance for chemical reaction. Forest soil proves that US were highly disturbed by anthropogenic activity. This is supported by fly-ash slag activity results.  Whereas, <sup>137</sup>Cs activity concentration of the AD samples shows significantly higher than that of the studied soils in Hungary. This confirms again US cannot show the historical atmospheric <sup>137</sup>Cs pollution such as attic dust. A statistically significant relationship (p=0.003, r<sup>2</sup>=0.05) were found between the AD and US samples. Therefore, it can be considered that attic dust remained undisturbed for decades and preserve past record of components of atmospheric pollution.</p><p> </p><p> </p>

Materials ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 475
Author(s):  
Ana María Moreno de los Reyes ◽  
José Antonio Suárez-Navarro ◽  
Maria del Mar Alonso ◽  
Catalina Gascó ◽  
Isabel Sobrados ◽  
...  

Supplementary cementitious materials (SCMs) in industrial waste and by-products are routinely used to mitigate the adverse environmental effects of, and lower the energy consumption associated with, ordinary Portland cement (OPC) manufacture. Many such SCMs, such as type F coal fly ash (FA), are naturally occurring radioactive materials (NORMs). 226Ra, 232Th and 40K radionuclide activity concentration, information needed to determine what is known as the gamma-ray activity concentration index (ACI), is normally collected from ground cement samples. The present study aims to validate a new method for calculating the ACI from measurements made on unground 5 cm cubic specimens. Mechanical, mineralogical and radiological characterisation of 28-day OPC + FA pastes (bearing up to 30 wt % FA) were characterised to determine their mechanical, mineralogical and radiological properties. The activity concentrations found for 226Ra, 212Pb, 232Th and 40K in hardened, intact 5 cm cubic specimens were also statistically equal to the theoretically calculated values and to the same materials when ground to a powder. These findings consequently validated the new method. The possibility of determining the activity concentrations needed to establish the ACI for cement-based materials on unground samples introduces a new field of radiological research on actual cement, mortar and concrete materials.


2021 ◽  
Author(s):  
Nataliia Chupakhina ◽  
Pavel Maslennikov ◽  
Pavel Feduraev ◽  
Luba Skrypnik ◽  
Galina Chupakhina

<p>The purpose of this work is to investigate the accumulation of metals in urban soils of the main geochemical landscapes of the urban environment and in plants growing in these areas. The paper presents the results of a study of the accumulation of metals (Cu, Pb, As, Co, Cr, V, Zn, Mn, Sr, Ni, Ca, Fe) in the accumulative soil horizon of the main functional zones of Kaliningrad (agricultural landscape, residential, industrial and municipal). As a control, we used the landscape of recreation and recreation. The accumulation of elements in the soil and leaves of plants during the growing season and calendar period (year) was studied. The content of TM was determined in the leaves of woody, shrubby and herbaceous plants (22 species) of the urban environment of the city of Kaliningrad.</p><p>The metal content in the samples was determined by X-ray fluorescence analysis on the Spectroscan Max-G device. Soil samples were taken from the upper accumulative horizon with a thickness of 0 to 10 cm by the envelope method. The content of TM in the samples was determined by X-ray fluorescence analysis on the device " Spectroscan Max-G "("Spektron", Russia). Soil samples for analysis were prepared in accordance with the M049-P/10 method.</p><p>In urban soils, a significant excess of background concentrations of lead, manganese, zinc, copper, strontium and nickel (Pb>Cu>Zn>Mn>Sr>Ni) was found. The maximum content of pollutants in urban soils was observed in industrial and residential multi-storey areas with increased transport load. It is shown that the pH of the soil has the greatest influence on the distribution of metals in the accumulative horizon.</p><p>The absorption of elements by plants is species-specific. The highest total level of metals (Mn, Fe, Zn, Sr, Br, Rb) was observed in the leaves of woody plants: holly maple, hanging birch and heart-shaped linden. Of the studied elements, the plants most accumulated manganese and iron. The accumulation of manganese in the leaves is more characteristic of woody plants than of shrubs or grasses. The maximum content of Mn was found in the leaves of holly maple (79.5%), in the leaves of other plants, manganese accumulated significantly less actively (2.7 - 35.6%). The predominant accumulation of iron was observed in the leaves of white clover, wrinkled rose and crowned chub, its content in the leaves was 81.0—83.8 %. Among woody species, the maximum concentration of iron was found in the leaves of heart-shaped linden (69.9 %) and hanging birch (53.4%). Among the species that actively accumulate Zn — black poplar (32.5 %), in the leaves of other plants, the zinc content is 2.2 — 16.8% of the total pollutants. The highest content of strontium was found in samples of meadow clover (19.1 %), in the leaves of other plants the proportion of metal was significantly lower (1.8—11.4%). Analysis of the accumulation of metals in the leaves of the studied plants revealed a positive correlation between the content of Fe and Sr (r = 0.71).</p><p> </p>


2020 ◽  
Vol 22 (11) ◽  
pp. 2256-2265
Author(s):  
Islam Md Meftaul ◽  
Kadiyala Venkateswarlu ◽  
Rajarathnam Dharmarajan ◽  
Prasath Annamalai ◽  
Mallavarapu Megharaj

The environmental fate and impact of dimethoate application in the urban environment were assessed in nine selected soils.


Soil Research ◽  
1999 ◽  
Vol 37 (2) ◽  
pp. 245 ◽  
Author(s):  
Wolfgang Wilcke ◽  
Silke Müller ◽  
Nualsri Kanchanakool ◽  
Chalinee Niamskul ◽  
Wolfgang Zech

Little is known about the polychlorinated biphenyl (PCB) pollution of tropical environments, although part of the contribution to global PCB contamination originates in the tropics. The objective of this study was to compare PCB concentrations and patterns in urban soils of Bangkok with data from the temperate zone to detect indications for possible differences in sources and fate of PCBs. The sum of congeners 1, 8, 20, 28, 52, 101, 118, 138, 153, 180, 206, and 209 (=Σ12PCBs) ranged from 0·19 to 11·4 µg/kg, which was lower than values reported for urban soils in the temperate zone. On average, the hexa-chlorinated PCBs 138 (mean of Σ12 PCBs± s.d., 22·7 ± 8·1%) and 153 (19·9 ± 9·0%) were most abundant. The Bangkok soils contained higher percentages of lower chlorinated PCBs (≤ 4 Cl) and correspondingly lower percentages of higher chlorinated PCBs (>4 Cl) than soils in 3 temperate cities. The differences may be explained by different sources, a lower age of contamination and therefore lower volatilisation, or anaerobic dechlorination during water-stagnant periods. The comparison of the PCB profiles in Bangkok soils with those of widely used commercial PCB mixtures indicated that the major PCB sources of Bangkok soils were the highly chlorinated Clophen A60, Aroclor 1260, or similar mixtures dominated by hexa-chlorinated PCBs.


2019 ◽  
Vol 8 (10) ◽  
Author(s):  
Motohiro Nishimura ◽  
Susumu Kawakami ◽  
Hideaki Otsuka

Streptomyces sp. strain NL15-2K is a degrader of lignin-derived aromatic compounds and was isolated from a forest soil sample.


2020 ◽  
Author(s):  
Roisin ORiordan ◽  
Jess Davies ◽  
Carly Stevens ◽  
John Quinton ◽  
Christopher Boyko

<p>The study of anthropogenic soils is a growing area of interest, and as cities continue to expand, urban soils are heavily influenced by human activities. Urbanisation exhibits a wide range of impacts on soil, from buried horizons, compaction, sealing with impervious surfaces, additions of anthropogenic material to being largely man-made soils, or technosols. The properties of urban soil are further complicated by the addition of fertilisers, management strategies in greenspaces and the treatments of soil, including topsoil removal, during construction projects. Therefore, the properties and functions of anthropogenic soils differ notably to that of natural soils, and as such, there is a need to understand the dynamics of soil carbon in urban areas.</p><p>Research on urban soil carbon has been relatively limited, however there is recent growth in this area due to its importance, firstly, as a carbon store contributing to climate regulation, and secondly, in relation to the potential of urban soil to support numerous ecosystem services. Urban soils are highly heterogeneous and anthropogenic carbon additions can come from many current or historical sources, such as charcoal used in old roads, coal ash from power stations, carbon from car tyres, as well as inorganic carbonates in limestone road foundations. Understanding the current stores of carbon, as well as how stable it is, is important to understand likely carbon dynamics and storage potential.</p><p>This work presents a field study across Manchester (UK) where soil carbon data has been collected from soils across urban parks, greenspaces and from under sealed surfaces (roads and pavements). It provides carbon data for a variety of urban contexts and with high spatial variability. We will build on previous work from this field study by presenting i) a typology of urban soils according to anthropogenic content, ii) data for physical size fractionation to understand soil physical properties and texture, and iii) the carbon content of the size fractions to provide a proxy for understanding how labile or stable the carbon is. This will allow us to understand the impacts of soil sealing on the carbon content and build a picture of soil carbon stability across a range of urban situations.</p><p>This research will contribute to the much-needed understanding on how soil carbon behaves in urban areas, and the implications of this for carbon storage in both sealed and urban greenspace soils. </p>


2020 ◽  
Author(s):  
Claudio Bini ◽  
Mohammad Wahsha

<p>Since the dawn of civilization, the anthropic activity has lead to a legacy of increased land degradation/contamination. Potentially harmful elements (PHEs) are among the most effective environmental contaminants, and their release into the environment is rising since the last decades. Interest in trace elements has been increased as a major scientific topic over the last 50 years when it was realized that some elements were essential to human health (e.g., Fe, Cu, Zn). In contrast, some others were toxic (e.g., As, Hg, Pb), and likely responsible for serious human diseases and lethal consequences. Since that time, great progress in knowledge of links between environmental geochemistry and human health has been achieved. The urban environment (nowadays the main habitat for the human population) is a potential PHEs source, with high risk for residents’ health. Indeed, PHEs concentration and distribution are related to traffic intensity, distance from roads, local topography, and heating. Industrial emissions also contribute to the release of toxic elements. Understanding the extent, distribution and fate of PHEs in the urban environment is therefore imperative to address the sustainable management of urban soils and gardens in relation to human health.</p><p>Despite the extensive researches addressed to this topic, the effects of most trace metals on human health are not yet fully understood. Uncertainty is still prevailing, particularly with non-essential elements that are “suspected” to be harmful to humans, causing severe health problems as intoxication, neurological disturbances and also cancer. Some of them (e.g., As, Cd, Hg, Pb) have attracted most attention worldwide due to their toxicity towards living organisms. Other elements (Al, B, Be, Bi, Co, Cr, Mn, Mo, Ni, Sb, Sn, Tl, V, W) are likely harmful, but may play some beneficial functions not yet well known, and should be more investigated.</p><p><strong>Keywords</strong>: Urban soils; PHEs; Human health</p>


Sign in / Sign up

Export Citation Format

Share Document