How are mineral and organic phases regulating burning-induced soil water repellency? Unravelling the crucial dynamics occurring in the Alps even at moderate fire intensities.

Author(s):  
Sara Negri ◽  
Beatrice Giannetta ◽  
Daniel Said-Pullicino ◽  
Luisella Celi ◽  
Eleonora Bonifacio

<p>Wildfires play the role of ecosystem shapers in the majority of terrestrial biomes, altering canopy and litter cover and imposing strong modifications on soils. Organic matter (OM) content and composition, mineralogy, pH, aggregate stability and water repellency (WR) are among the main edaphic properties to be affected by heat. Various studies dealt with occurrence, extent and persistence of burning-induced soil WR, but the dynamics at the basis of its formation (and loss) are still widely unclear. In addition, the vast majority of research on this topic has been carried out in the Mediterranean, even if alpine environments are far from being untouched by fires. Our aims were therefore to provide insight into the key mechanisms regulating WR thermal alterations in a relatively understudied environment.</p><p>Our sampling design aimed at collecting soils representative of the Western Italian Alps. Charring was simulated in the lab, at increasing temperatures (up to 300° C), on a set of A soil horizons developed under pine and beech forest covers. Water drop penetration time (WDPT) was employed to test WR persistence. Soils were analyzed in terms of organic carbon (OC) and nitrogen contents, pH, texture and iron (Fe) oxides composition (Fe-DCB and Fe-pyrophosphate extracted). Fe-speciation and OM composition of some selected samples were further characterized using Fe K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy and Fourier transform-infra red (FT-IR) spectroscopy, respectively.</p><p>WR was found to be extremely variable, event at room temperature. For samples exhibiting an increase in WR upon burning intensity, maximum repellency was observed at 200° C. OC abundance (%) and coarse texture were found to be the main drivers of hydrophobicity in soil. WR was drastically lost when samples were exposed to temperatures higher than 200°C. Above this threshold, pH systematically increased and OC (%) sharply decreased. The increasingly negative charge of mineral surfaces, mirrored by pH increase, seems to result in a significant C volatilization by OM desorption, eventually leading to a super-hydrophilic behavior in soil.</p><p>Fe EXAFS allowed to evaluate different thermal-dictated pathways of Fe-speciation. The formation of more crystalline Fe-forms (e.g. hematite, meghemite) was observed above 200° C. Even though a reduction in surface area should be expected when observing an increase in crystallization degree (potentially giving rise to greater WR), OM adhesion to mineral surfaces seems to be inhibited by the change induced in their charge. A reduction in the OM-bound Fe pool (pyrophosphate extracted) above 200° C could be appreciated, supporting the interpretation of oxy-hydroxides transformations and OC (%) loss.  </p><p>The current investigation has been carried out to capture an in-depth picture of wildfire impacts on alpine soils, targeting factors responsible for WR enhancement and shred. Identifying the mechanisms regulating wildfire-related WR is a key issue, as the formation of hydrophobic layers in soil highly favors its erosion. Addressing such matters is crucial to tackle the issue of ecosystems recovery, considering that climate-change-related alterations in wildfires regimes are already causing the occurrence of more frequent and disruptive fires.</p>

2014 ◽  
Vol 62 (2) ◽  
pp. 97-100 ◽  
Author(s):  
D.A.L. Leelamanie ◽  
Jutaro Karube

Abstract Hydrophobicity is a property of soils that reduces their affinity for water, which may help impeding the pressure build-up within aggregates, and reducing aggregate disruption. The purpose of this study was to examine the relation of soil hydrophobicity and drying temperature to water stability of aggregates while preventing the floating of dry aggregates using unhydrophobized and hydrophobized surface Andisol. Soil was hydrophobized using stearic acid into different hydrophobicities. Hydrophobicity was determined using sessile drop contact angle and water drop penetration time (WDPT). Water stability of aggregates (%WSA) was determined using artificially prepared model aggregates. The %WSA increased as the contact angle and WDPT increased. Contact angle and WDPT, which provided maximum %WSA showing less than 1 s of floating, was around 100° and 5 s, respectively. Although the %WSA gradually increased with increasing contact angle and WDPT above this level, high levels of hydrophobicity initiated aggregate floating, which would cause undesirable effects of water repellency. Heating at 50°C for 5 h d-1 significantly affected %WSA and hydrophobicity in hydrophobized samples, but did not in unhydrophobized samples. The results indicate that the contact angle and wetting rate (WDPT) are closely related with the water stability of aggregates. The results further confirm that high levels of hydrophobicities induce aggregate floating, and the drying temperature has differential effects on hydrophobicity and aggregate stability depending on the hydrophobic materials present in the soil.


2011 ◽  
Vol 50 (No. 8) ◽  
pp. 358-363 ◽  
Author(s):  
P. Dlapa ◽  
S.H. Doerr ◽  
Ľ. Lichner ◽  
M. Šír ◽  
M. Tesař

The effects of adding 1–3% (weight) kaolinite or Ca-montmorillonite on the wettability of silica sand, made highly water repellent with stearic acid, was studied during wetting and prolonged drying phases at 50°C. The persistence of water repellency was estimated with the water drop penetration time (WDPT) test. After wetting water repellency disappeared in all the samples. During the drying phase, water repellency re-appeared in all samples (untreated and clay-treated) as the water content decreased below 1%. Repellency did, however, not reach pre-wetting levels. The effect of clay additions on water repellency differed strongly between the two clay types. Kaolinite reduced WDPT, while Ca-montmorillonite caused an increase in WDPT in the already highly repellent sand. Potential mechanisms for the alleviation effectiveness of kaolinite are proposed, with key factors being the high adhesion forces between water and clay mineral surfaces, and the ability kaolinite to disperse. In the case of Ca-montmorillonite, its lower affinity for water may lead to a displacement of water molecules at mineral surfaces by amphiphilic organic compounds, which may result in increased repellency. This phenomenon clearly requires further investigation.


2013 ◽  
Vol 22 (4) ◽  
pp. 515 ◽  
Author(s):  
Naama Tessler ◽  
Lea Wittenberg ◽  
Noam Greenbaum

Variations in forest fires regime affect: (1) the natural patterns of community structure and vegetation; (2) the physico-chemical properties of soils and consequently (3) runoff, erosion and sediment yield. In recent decades the Mediterranean ecosystem of Mount Carmel, north-western Israel, is subjected to an increasing number of forest fires, thus, the objectives of the study were to evaluate the long-term effects of single and recurrent fires on soil water repellency (WR) and organic matter (OM) content. Water repellency was studied by applying water drop penetration time (WDPT) tests at sites burnt by single-fire, two fires, three fires and unburnt control sites. Water repellency in the burnt sites was significantly lower than in the unburnt control sites, and the soil maintained its wettability for more than 2 decades, whereas after recurrent fires, the rehabilitation was more complicated and protracted. The OM content was significantly lower after recurrent than after a single fire, causing a clear proportional decrease in WR. The rehabilitation of WR to natural values is highly dependent on restoration of organic matter and revegetation. Recurrent fires may cause a delay in recovery and reduced productivity of the soil for a long period.


CATENA ◽  
2014 ◽  
Vol 118 ◽  
pp. 115-123 ◽  
Author(s):  
Antonio Jordán ◽  
Ángel J. Gordillo-Rivero ◽  
Jorge García-Moreno ◽  
Lorena M. Zavala ◽  
Arturo J.P. Granged ◽  
...  

Geoderma ◽  
2010 ◽  
Vol 158 (3-4) ◽  
pp. 366-374 ◽  
Author(s):  
Lorena M. Zavala ◽  
Arturo J.P. Granged ◽  
Antonio Jordán ◽  
Gema Bárcenas-Moreno

2008 ◽  
Vol 3 (Special Issue No. 1) ◽  
pp. S155-S164 ◽  
Author(s):  
N.A Wahl

Soil water repellency has important consequences for ecological and hydrological properties of soils and usually retards infiltration capacity and induces preferential flow. This phenomenon has been known to occur on a wide range of sites under a variety of climatic conditions. The objective of this study was to investigate and characterize soil water repellency on forest sites with identical substrate and climatic conditions, differing in tree age and species. In the Vester Torup Klitplantage, an area comprising a conifer dominated forest plantation stocking on sandy deposits in a coastal setting near the Jammer Bay in north-western Jutland/Denmark, four different forest plots were investigated for water repellency effects four times in 2005. To measure soil water repellency, the water drop penetration time test and the critical surface tension test were carried out. Both tests revealed a seasonal variability in water repellency, exhibiting the highest water repellency for the upper 10 cm of the soil during the summer months, whereas the variability between the different plots seems to be less significant. There was no coherence between humus forms, thickness of litter layer and water repellency.


2004 ◽  
Vol 13 (2) ◽  
pp. 195 ◽  
Author(s):  
R. García-Corona ◽  
E. Benito ◽  
E. de Blas ◽  
M. E. Varela

Two forest soils rich in organic matter but differing in texture (sandy loam and silty loam) were heated under controlled laboratory conditions in order to examine the consequences of the heating effect that accompanies the passage of a fire on the physical properties of soil. Three samples of both soils were heated for 30 min in a muffle furnace at temperatures of 25, 170, 220, 380 and 460°C. At each temperature, the following parameters were determined: dry aggregate size distribution, water aggregate stability, total porosity, pore size distribution, water repellency and hydraulic conductivity. Heating the soils at 170 and 220°C caused no significant changes in aggregate size distribution or total porosity but increased water aggregate stability and the volume of pores 0.2–30 μm. Also, increased water repellency and strongly decreased the hydraulic conductivity. All parameters underwent much more dramatic changes at 380 and 460°C that can be ascribed to the combustion of organic matter. At such temperatures, water repellency was destroyed and the low hydraulic conductivity can be attributed to the aggregate breakdown observed under dry and wet conditions.


2020 ◽  
Author(s):  
Peter Surda ◽  
Lubomir Lichner ◽  
Viliam Nagy

<p>Abandonment of agricultural lands in recent decades is occurring mainly in Europe, North America and Oceania, and changing the fate of landscapes as the ecosystem recovers during fallow stage. The objective of this study was to find the impact of secondary succession in abandoned fields on some parameters of acidic sandy soils in the Borská nížina lowland (southwestern Slovakia). We investigated soil chemical (pH and soil organic carbon content), hydrophysical (water sorptivity, and hydraulic conductivity), and water repellency (water drop penetration time, water repellency cessation time, repellency index, and modified repellency index) parameters, as well as the ethanol sorptivity of the studied soils. Both the hydrophysical and chemical parameters decreased significantly during abandonment of the three investigated agricultural fields. On the other hand, the water repellency parameters increased significantly, but the ethanol sorptivity did not change during abandonment. As the ethanol sorptivity depends mainly on soil pore size, the last finding could mean that the pore size of acidic sandy soils did not change during succession.</p>


Sign in / Sign up

Export Citation Format

Share Document