scholarly journals Comprehensive bathymetry and intertidal topography of the Amazon estuary

2021 ◽  
Author(s):  
Alice César Fassoni-Andrade ◽  
Fabien Durand ◽  
Daniel Moreira ◽  
Alberto Azevedo ◽  
Valdenira Ferreira dos Santos ◽  
...  
Keyword(s):  
Remote Sensing ◽  
River Estuary ◽  
Remote Sensing Data ◽  
Airborne Lidar ◽  
Distributed Data ◽  
River Bed ◽  
Amazon Estuary ◽  
Spatially Distributed ◽  
Estuarine Hydrodynamics

Abstract. The characterization of estuarine hydrodynamics primarily depends on the knowledge of bathymetry and topography. Here we present the first comprehensive, high-resolution dataset of the topography and bathymetry of the Amazon River estuary, the world's largest estuary. Our product is based on an innovative approach combining space-borne remote sensing data, an extensive and processed river depth dataset, and auxiliary data. Our goal with this characterization is to promote the database usage in studies that require this information, such as hydrodynamic modeling or geomorphological assessments. Our twofold approach considered 500'000 sounding points digitized from 19 nautical charts for bathymetry estimation, in conjunction with a state-of-the-art topography dataset based on remote sensing, encompassing intertidal flats, riverbanks, and adjacent floodplains. Finally, our estimate can be accessed in a unified 30 m resolution regular grid referenced to EGM08, complemented both landward and seaward with land (MERIT DEM) and ocean (GEBCO2020) topography data. Extensive validation against independent and spatially-distributed data, from an airborne LIDAR survey, from ICESat-2 altimetric satellite data, and from various in situ surveys, shows a typical accuracy of 8.4 m (river bed) and 1.2 m (non-vegetated inter-tidal floodplains). The dataset is available at http://dx.doi.org/10.17632/3g6b5ynrdb.1 (Fassoni-Andrade et al., 2021).

scholarly journals Comprehensive bathymetry and intertidal topography of the Amazon estuary

2021 ◽  
Vol 13 (5) ◽  
pp. 2275-2291
Author(s):  
Alice César Fassoni-Andrade ◽  
Fabien Durand ◽  
Daniel Moreira ◽  
Alberto Azevedo ◽  
Valdenira Ferreira dos Santos ◽  
...  
Keyword(s):  
Remote Sensing ◽  
River Estuary ◽  
Remote Sensing Data ◽  
Airborne Lidar ◽  
Distributed Data ◽  
Amazon Estuary ◽  
Digital Elevation ◽  
Spatially Distributed ◽  
Estuarine Hydrodynamics ◽  
Elevation Model

Abstract. The characterization of estuarine hydrodynamics primarily depends on knowledge of the bathymetry and topography. Here, we present the first comprehensive, high-resolution dataset of the topography and bathymetry of the Amazon River estuary, the world's largest estuary. Our product is based on an innovative approach combining spaceborne remote sensing data, an extensive and processed river depth dataset, and auxiliary data. Our goal with this mapping is to promote the database usage in studies that require this information, such as hydrodynamic modeling or geomorphological assessments. Our twofold approach considered 500 000 sounding points digitized from 19 nautical charts for bathymetry estimation, in conjunction with a state-of-the-art topographic dataset based on remote sensing, encompassing intertidal flats, riverbanks, and adjacent floodplains. Finally, our estimate can be accessed in a unified 30 m resolution regular grid referenced to the Earth Gravitational Model 2008 (EGM08), complemented both landward and seaward by land (Multi-Error-Removed Improved-Terrain digital elevation model, MERIT DEM) and ocean (General Bathymetric Chart of the Oceans version 2020, GEBCO_2020) topographic data. Extensive validation against independent and spatially distributed data, from an airborne lidar survey, from ICESat-2 altimetric satellite data, and from various in situ surveys, shows a typical vertical accuracy of 7.2 m (riverbed) and 1.2 m (non-vegetated intertidal floodplains). The dataset is available at https://doi.org/10.17632/3g6b5ynrdb.2 (Fassoni-Andrade et al., 2021).

scholarly journals Deep Learning for Monitoring Agricultural Drought in South Asia Using Remote Sensing Data

2021 ◽  
Vol 13 (9) ◽  
pp. 1715
Author(s):  
Foyez Ahmed Prodhan ◽  
Jiahua Zhang ◽  
Fengmei Yao ◽  
Lamei Shi ◽  
Til Prasad Pangali Sharma ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Deep Learning ◽  
South Asia ◽  
Model Performance ◽  
Remote Sensing Data ◽  
Agricultural Drought ◽  
Gradient Boosting ◽  
Complex Nature ◽  
Sensing Data

Drought, a climate-related disaster impacting a variety of sectors, poses challenges for millions of people in South Asia. Accurate and complete drought information with a proper monitoring system is very important in revealing the complex nature of drought and its associated factors. In this regard, deep learning is a very promising approach for delineating the non-linear characteristics of drought factors. Therefore, this study aims to monitor drought by employing a deep learning approach with remote sensing data over South Asia from 2001–2016. We considered the precipitation, vegetation, and soil factors for the deep forwarded neural network (DFNN) as model input parameters. The study evaluated agricultural drought using the soil moisture deficit index (SMDI) as a response variable during three crop phenology stages. For a better comparison of deep learning model performance, we adopted two machine learning models, distributed random forest (DRF) and gradient boosting machine (GBM). Results show that the DFNN model outperformed the other two models for SMDI prediction. Furthermore, the results indicated that DFNN captured the drought pattern with high spatial variability across three penology stages. Additionally, the DFNN model showed good stability with its cross-validated data in the training phase, and the estimated SMDI had high correlation coefficient R2 ranges from 0.57~0.90, 0.52~0.94, and 0.49~0.82 during the start of the season (SOS), length of the season (LOS), and end of the season (EOS) respectively. The comparison between inter-annual variability of estimated SMDI and in-situ SPEI (standardized precipitation evapotranspiration index) showed that the estimated SMDI was almost similar to in-situ SPEI. The DFNN model provides comprehensive drought information by producing a consistent spatial distribution of SMDI which establishes the applicability of the DFNN model for drought monitoring.

scholarly journals ESTIMATION OF SURFACE SNOW WETNESS USING SENTINEL-2 MULTISPECTRAL DATA

2018 ◽  
Vol IV-5 ◽  
pp. 223-228 ◽  
Author(s):  
D. Varade ◽  
O. Dikshit
Keyword(s):  
Remote Sensing ◽  
Water Resource Management ◽  
Remote Sensing Data ◽  
Microwave Remote Sensing ◽  
In Situ Measurements ◽  
Physical Relationship ◽  
Sensing Data ◽  
Surface Snow ◽  
Sentinel 2

<p><strong>Abstract.</strong> Snow cover characterization and estimation of snow geophysical parameters is a significant area of research in water resource management and surface hydrological processes. With advances in spaceborne remote sensing, much progress has been achieved in the qualitative and quantitative characterization of snow geophysical parameters. However, most of the methods available in the literature are based on the microwave backscatter response of snow. These methods are mostly based on the remote sensing data available from active microwave sensors. Moreover, in alpine terrains, such as in the Himalayas, due to the geometrical distortions, the missing data is significant in the active microwave remote sensing data. In this paper, we present a methodology utilizing the multispectral observations of Sentinel-2 satellite for the estimation of surface snow wetness. The proposed approach is based on the popular triangle method which is significantly utilized for the assessment of soil moisture. In this case, we develop a triangular feature space using the near infrared (NIR) reflectance and the normalized differenced snow index (NDSI). Based on the assumption that the NIR reflectance is linearly related to the liquid water content in the snow, we derive a physical relationship for the estimation of snow wetness. The modeled estimates of snow wetness from the proposed approach were compared with in-situ measurements of surface snow wetness. A high correlation determined by the coefficient of determination of 0.94 and an error of 0.535 was observed between the proposed estimates of snow wetness and in-situ measurements.</p>

scholarly journals An investigation into remote sensing techniques and field observations for modeling of dynamic hydraulic roughness from riparian vegetation

2021 ◽  
Author(s):  
Smriti Chaulagain ◽  
Mark Stone ◽  
Daniel Dombroski ◽  
Tyler Gillihan ◽  
Li Chen ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Hydrodynamic Model ◽  
Riparian Vegetation ◽  
Airborne Lidar ◽  
Calibration Data ◽  
Local Flow ◽  
Hydraulic Roughness ◽  
Dynamic Roughness ◽  
Spatially Distributed ◽  
Vegetation Parameters

Riparian vegetation provides many noteworthy functions in river and floodplain systems including its influence on hydrodynamic processes. Traditional methods for predicting hydrodynamic characteristics in the presence of vegetation involve the application of static roughness ( n) values, which neglect changes in roughness due to local flow characteristics. The objectives of this study were to: (1) implement numerical routines for simulating dynamic hydraulic roughness ( n) in a two-dimensional (2D) hydrodynamic model; (2) evaluate the performance of two dynamic roughness approaches; and (3) compare vegetation parameters and hydrodynamic model results based on field-based and remote sensing acquisition methods. A coupled vegetation-hydraulic solver was developed for a 2D hydraulics model using two dynamic approaches, which required vegetation parameters to calculate spatially distributed, dynamic roughness coefficients. Vegetation parameters were determined by field survey and using airborne LiDAR data. Water surface elevations modeled using conventional and the proposed dynamic approaches produced similar profiles. The method demonstrates the suitability in modeling the system where there is no calibration data. Substantial spatial variations in both n and hydraulic parameters were observed when comparing the static and dynamic approaches. Thus, the method proposed here is beneficial for describing the hydraulic conditions for the area having huge variation of vegetation. The proposed methods have the potential to improve our ability to simulate the spatial and temporal heterogeneity of vegetated floodplain surfaces with an approach that is more physically-based and reproducible than conventional “look up” approaches. However, additional research is needed to quantify model performance with respect to spatially distributed flow properties and parameterization of vegetation characteristics.

scholarly journals Estudo do ciclo diário da Camada Limite Planetária durante a estação cChuvosa da Amazônia (GOAmazon 2014/15)

2018 ◽  
Vol 40 ◽  
pp. 63 ◽  
Author(s):  
Rayonil Gomes Carneiro ◽  
Alice Henkes ◽  
Gilberto Fisch ◽  
Camilla Kassar Borges
Keyword(s):  
Remote Sensing ◽  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Remote Sensing Data ◽  
Great Depth ◽  
Wet Season ◽  
Daily Cycle ◽  
Convective Boundary ◽  
In Situ Observations

In the present study, the evolution the diurnal cycle of planetary boundary layer in the wet season at Amazon region during a period of intense observations carried out in the GOAmazon Project 2014/2015 (Green Ocean Amazon).The analysis includes radiosonde and remote sensing data. In general case, the results of the daily cycle in the wet season indicate a Nocturnal boundary layer with a small oscillation in its depth and with a tardy erosion. The convective boundary layer did not present great depth, responding to the low values of sensible heat of the wet season. A comparison between the different techniques(in situ observations and remote sensing)  for estimating the planetary boundary layer is also presented.

scholarly journals A snow cover climatology for the Pyrenees from MODIS snow products

2014 ◽  
Vol 11 (11) ◽  
pp. 12531-12571 ◽  
Author(s):  
S. Gascoin ◽  
O. Hagolle ◽  
M. Huc ◽  
L. Jarlan ◽  
J.-F. Dejoux ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Snow Cover ◽  
Snow Water Equivalent ◽  
Remote Sensing Data ◽  
Landsat Images ◽  
Forested Areas ◽  
Land Cover Map ◽  
Hydropower Production ◽  
Snow Cover Duration

Abstract. The seasonal snow in the Pyrenees is critical for hydropower production, crop irrigation and tourism in France, Spain and Andorra. Complementary to in situ observations, satellite remote sensing is useful to monitor the effect of climate on the snow dynamics. The MODIS daily snow products (Terra/MOD10A1 and Aqua/MYD10A1) are widely used to generate snow cover climatologies, yet it is preferable to assess their accuracies prior to their use. Here, we use both in situ snow observations and remote sensing data to evaluate the MODIS snow products in the Pyrenees. First, we compare the MODIS products to in situ snow depth (SD) and snow water equivalent (SWE) measurements. We estimate the values of the SWE and SD best detection thresholds to 40 mm water equivalent (we) and 105 mm respectively, for both MOD10A1 and MYD10A1. Kappa coefficients are within 0.74 and 0.92 depending on the product and the variable. Then, a set of Landsat images is used to validate MOD10A1 and MYD10A1 for 157 dates between 2002 and 2010. The resulting accuracies are 97% (κ = 0.85) for MOD10A1 and 96% (κ = 0.81) for MYD10A1, which indicates a good agreement between both datasets. The effect of vegetation on the results is analyzed by filtering the forested areas using a land cover map. As expected, the accuracies decreases over the forests but the agreement remains acceptable (MOD10A1: 96%, κ = 0.77; MYD10A1: 95%, κ = 0.67). We conclude that MODIS snow products have a sufficient accuracy for hydroclimate studies at the scale of the Pyrenees range. Using a gapfilling algorithm we generate a consistent snow cover climatology, which allows us to compute the mean monthly snow cover duration per elevation band. We finally analyze the snow patterns for the atypical winter 2011–2012. Snow cover duration anomalies reveal a deficient snowpack on the Spanish side of the Pyrenees, which seems to have caused a drop in the national hydropower production.

Cloud-based Research Data Infrastructures Integrating In-Situ and Remote Sensing Data

2021 ◽  
Author(s):  
Simon Jirka ◽  
Benedikt Gräler ◽  
Matthes Rieke ◽  
Christian Autermann
Keyword(s):  
Remote Sensing ◽  
Remote Sensing Data ◽  
Research Data ◽  
Monitoring Networks ◽  
Sensing Data ◽  
Data Infrastructures ◽  
Practical Experiences ◽  
The One ◽  
Cloud Infrastructures

&lt;p&gt;For many scientific domains such as hydrology, ocean sciences, geophysics and social sciences, geospatial observations are an important source of information. Scientists conduct extensive measurement campaigns or operate comprehensive monitoring networks to collect data that helps to understand and to model current and past states of complex environment. The variety of data underpinning research stretches from in-situ observations to remote sensing data (e.g., from the European Copernicus programme) and contributes to rapidly increasing large volumes of geospatial data.&lt;/p&gt;&lt;p&gt;However, with the growing amount of available data, new challenges arise. Within our contribution, we will focus on two specific aspects: On the one hand, we will discuss the specific challenges which result from the large volumes of remote sensing data that have become available for answering scientific questions. For this purpose, we will share practical experiences with the use of cloud infrastructures such as the German platform CODE-DE and will discuss concepts that enable data processing close to the data stores. On the other hand, we will look into the question of interoperability in order to facilitate the integration and collaborative use of data from different sources. For this aspect, we will give special consideration to the currently emerging new generation of standards of the Open Geospatial Consortium (OGC) and will discuss how specifications such as the OGC API for Processes can help to provide flexible processing capabilities directly within Cloud-based research data infrastructures.&lt;/p&gt;

scholarly journals Incorporation of Unmanned Aerial Vehicle (UAV) Point Cloud Products into Remote Sensing Evapotranspiration Models

2019 ◽  
Vol 12 (1) ◽  
pp. 50 ◽  
Author(s):  
Mahyar Aboutalebi ◽  
Alfonso F. Torres-Rua ◽  
Mac McKee ◽  
William P. Kustas ◽  
Hector Nieto ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Surface Area ◽  
Point Cloud ◽  
Spatial Information ◽  
Point Cloud Data ◽  
Area Index ◽  
Cloud Data ◽  
Fractional Cover ◽  
Spatially Distributed

In recent years, the deployment of satellites and unmanned aerial vehicles (UAVs) has led to production of enormous amounts of data and to novel data processing and analysis techniques for monitoring crop conditions. One overlooked data source amid these efforts, however, is incorporation of 3D information derived from multi-spectral imagery and photogrammetry algorithms into crop monitoring algorithms. Few studies and algorithms have taken advantage of 3D UAV information in monitoring and assessment of plant conditions. In this study, different aspects of UAV point cloud information for enhancing remote sensing evapotranspiration (ET) models, particularly the Two-Source Energy Balance Model (TSEB), over a commercial vineyard located in California are presented. Toward this end, an innovative algorithm called Vegetation Structural-Spectral Information eXtraction Algorithm (VSSIXA) has been developed. This algorithm is able to accurately estimate height, volume, surface area, and projected surface area of the plant canopy solely based on point cloud information. In addition to biomass information, it can add multi-spectral UAV information to point clouds and provide spectral-structural canopy properties. The biomass information is used to assess its relationship with in situ Leaf Area Index (LAI), which is a crucial input for ET models. In addition, instead of using nominal field values of plant parameters, spatial information of fractional cover, canopy height, and canopy width are input to the TSEB model. Therefore, the two main objectives for incorporating point cloud information into remote sensing ET models for this study are to (1) evaluate the possible improvement in the estimation of LAI and biomass parameters from point cloud information in order to create robust LAI maps at the model resolution and (2) assess the sensitivity of the TSEB model to using average/nominal values versus spatially-distributed canopy fractional cover, height, and width information derived from point cloud data. The proposed algorithm is tested on imagery from the Utah State University AggieAir sUAS Program as part of the ARS-USDA GRAPEX Project (Grape Remote sensing Atmospheric Profile and Evapotranspiration eXperiment) collected since 2014 over multiple vineyards located in California. The results indicate a robust relationship between in situ LAI measurements and estimated biomass parameters from the point cloud data, and improvement in the agreement between TSEB model output of ET with tower measurements when employing LAI and spatially-distributed canopy structure parameters derived from the point cloud data.

Sign in / Sign up

Export Citation Format

Share Document