scholarly journals U–Pb geochronology of epidote by LA–ICP–MS as a tool for dating hydrothermal-vein formation

2020 ◽  
Author(s):  
Veronica Peverelli ◽  
Tanya Ewing ◽  
Daniela Rubatto ◽  
Martin Wille ◽  
Alfons Berger ◽  
...  

Abstract. Monoclinic epidote is a low-µ (µ = 283U / 204Pb) mineral occurring in a variety of geological environments, participating in many metamorphic reactions and stable throughout a wide range of pressure–temperature conditions. Despite containing fair amounts of U, its use as a U–Pb geochronometer has been hindered by the commonly high contents of initial Pb with isotopic compositions that cannot be assumed a priori. We present U–Pb geochronology of hydrothermal-vein epidote spanning a wide range of Pb (3.9–190 µg g−1), Th (0.009–38 µg g−1) and U (2.6–530 µg g−1) contents and with µ values between 7–510 from the Albula area (eastern Swiss Alps), from the Grimsel area (central Swiss Alps) and from the Heyuan fault (Guangdong province, China). The investigated epidote samples show appreciable fractions of initial Pb that vary to different extents. A protocol has been developed for in situ U–Pb dating of epidote by spot-analysis laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) with a magmatic allanite as primary reference material. The suitability of the protocol and the reliability of the measured isotopic ratios have been ascertained by independent measurements of 238U / 206Pb and 207Pb / 206Pb ratios respectively by quadrupole and multicollector ICP–MS applied to epidote micro-separates digested and diluted in acids. For age calculation, we used the Tera–Wasserburg (207Pb / 206Pb–238U / 206Pb) diagram, which does not require corrections for initial Pb and provides the initial 207Pb / 206Pb ratio if all intra-sample analyses are co-genetic. Petrographic and microstructural data indicate that the calculated ages date the crystallization of vein epidote from a hydrothermal fluid and that the U–Pb system was not reset to younger ages by later events. Vein epidote from the Albula area formed in the Paleocene (62.7 ± 3.0 Ma) and is related to Alpine greenschist-facies metamorphism. The Miocene (19.1 ± 4.0 Ma and 16.9 ± 3.7 Ma) epidote veins from the Grimsel area formed during the Handegg phase (22–17 Ma) of the Alpine evolution of the Aar Massif. Identical initial 207Pb / 206Pb ratios reveal homogeneity in Pb isotopic compositions of the fluid across ca. 200 m. Vein epidote from the Heyuan fault is Cretaceous in age (108.1 ± 8.4 Ma) and formed during the early movements of the fault. In situ U–Pb analyses of epidote returned reliable ages of otherwise undatable epidote-quartz veins. The Tera–Wasserburg approach has proven pivotal for in situ U–Pb dating of epidote and the decisive aspect for low age uncertainties is the variability in intra-sample initial Pb fractions.

Geochronology ◽  
2021 ◽  
Vol 3 (1) ◽  
pp. 123-147
Author(s):  
Veronica Peverelli ◽  
Tanya Ewing ◽  
Daniela Rubatto ◽  
Martin Wille ◽  
Alfons Berger ◽  
...  

Abstract. Epidote – here defined as minerals belonging to the epidote–clinozoisite solid solution – is a low-μ (μ=238U/204Pb) mineral occurring in a variety of geological environments and participating in many metamorphic reactions that is stable throughout a wide range of pressure–temperature conditions. Despite containing fair amounts of U, its use as a U−Pb geochronometer has been hindered by the commonly high contents of initial Pb, with isotopic compositions that cannot be assumed a priori. We present a U−Pb geochronology of hydrothermal-vein epidote spanning a wide range of Pb (3.9–190 µg g−1), Th (0.01–38 µg g−1), and U (2.6–530 µg g−1) contents and with μ values between 7 and 510 from the Albula area (eastern Swiss Alps), from the Grimsel area (central Swiss Alps), and from the Heyuan fault (Guangdong Province, China). The investigated epidote samples show appreciable fractions of initial Pb contents (f206=0.7–1.0) – i.e., relative to radiogenic Pb – that vary to different extents. A protocol has been developed for in situ U−Pb dating of epidote by spot-analysis laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) with a magmatic allanite as the primary reference material. The suitability of the protocol and the reliability of the measured isotopic ratios have been ascertained by independent measurements of 238U/206Pb and 207Pb/206Pb ratios, respectively, with quadrupole and multicollector ICP-MS applied to epidote micro-separates digested and diluted in acids. For age calculation, we used the Tera–Wasserburg (207Pb/206Pb versus 238U/206Pb) diagram, which does not require corrections for initial Pb and provides the initial 207Pb/206Pb ratio. Petrographic and microstructural data indicate that the calculated ages date the crystallization of vein epidote from a hydrothermal fluid and that the U−Pb system was not reset to younger ages by later events. Vein epidote from the Albula area formed in the Paleocene (62.7±3.0 Ma) and is related to Alpine greenschist-facies metamorphism. The Miocene (19.2±4.3 and 16.9±3.7 Ma) epidote veins from the Grimsel area formed during the Handegg deformation phase (22–17 Ma) of the Alpine evolution of the Aar Massif. Identical initial 207Pb/206Pb ratios reveal homogeneity in Pb isotopic compositions of the fluid across ca. 100 m. Vein epidote from the Heyuan fault is Cretaceous in age ( 107.2±8.9 Ma) and formed during the early movements of the fault. In situ U−Pb analyses of epidote returned reliable ages of otherwise undatable epidote–quartz veins. The Tera–Wasserburg approach has proven pivotal for in situ U−Pb dating of epidote, and the decisive aspect for low age uncertainties is the variability in intra-sample initial Pb fractions.


2006 ◽  
Vol 10 ◽  
pp. 25-28 ◽  
Author(s):  
Dirk Frei ◽  
Julie A. Hollis ◽  
Axel Gerdes ◽  
Dan Harlov ◽  
Christine Karlsson ◽  
...  

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was developed in 1985 and the first commercial laser ablation systems were introduced in the mid 1990s. Since then, LA-ICP-MS has become an important analytical tool in the earth sciences. Initially, the main interest for geologists was in its ability to quantitatively determine the contents of a wide range of elements in many minerals at very low concentrations (a few ppm and below) with relatively high spatial resolution (spot diameters of typically 30–100 μm). The potential of LA-ICP-MS for rapid in situ U–Th–Pb geochronology was already realised in the early to mid 1990s. However, the full potential of LA-ICP-MS as the low-cost alternative to ion-microprobe techniques for highly precise and accurate in situ U–Th–Pb age dating was not realised until the relatively recent advances in laser technologies and the introduction of magnetic sectorfield ICP-MS (SF-ICPMS) instruments. In March 2005, the Geological Survey of Denmark and Greenland (GEUS) commissioned a new laser ablation magnetic sectorfield inductively coupled plasma mass spectrometry (LA-SF-ICP-MS) facility employing a ThermoFinnigan Element2 high resolution magnetic sectorfield ICP-MS and a Merchantek New Wave 213 nm UV laser ablation system. The new GEUS LA-SF-ICP-MS facility is widely used on Survey research projects in Denmark and Greenland, as well as in collaborative research and contract projects conducted with partners from academia and industry worldwide. Here, we present examples from some of the these ongoing studies that highlight the application of the new facility for advanced geochronological and trace element in situ microanalysis of geomaterials. The application of LASF-ICP-MS based in situ zircon geochronology to regional studies addressing the Archaean geology of southern West Greenland is presented by Hollis et al. (2006, this volume).


2021 ◽  
Vol 9 (2) ◽  
pp. 336
Author(s):  
Laura Matarredona ◽  
Mónica Camacho ◽  
Basilio Zafrilla ◽  
Gloria Bravo-Barrales ◽  
Julia Esclapez ◽  
...  

Haloarchaea can survive and thrive under exposure to a wide range of extreme environmental factors, which represents a potential interest to biotechnology. Growth responses to different stressful conditions were examined in the haloarchaeon Haloferax mediterranei R4. It has been demonstrated that this halophilic archaeon is able to grow between 10 and 32.5% (w/v) of sea water, at 32–52 °C, although it is expected to grow in temperatures lower than 32 °C, and between 5.75 and 8.75 of pH. Moreover, it can also grow under high metal concentrations (nickel, lithium, cobalt, arsenic), which are toxic to most living beings, making it a promising candidate for future biotechnological purposes and industrial applications. Inductively Coupled Plasma Mass Spectrometry (ICP-MS) analysis quantified the intracellular ion concentrations of these four metals in Hfx. mediterranei, concluding that this haloarchaeon can accumulate Li+, Co2+, As5+, and Ni2+ within the cell. This paper is the first report on Hfx. mediterranei in which multiple stress conditions have been studied to explore the mechanism of stress resistance. It constitutes the most detailed study in Haloarchaea, and, as a consequence, new biotechnological and industrial applications have emerged.


2020 ◽  
Vol 58 (3) ◽  
pp. 293-311 ◽  
Author(s):  
Zeinab Azadbakht ◽  
David R. Lentz

ABSTRACT Biotite grains from 22 felsic intrusions in New Brunswick were mapped in situ using a laser ablation-inductively coupled plasma-mass spectrometer (LA-ICP-MS). We investigated the extent to which biotite can retain its magmatic zoning patterns and, where zoning does exist, how it can be used to elucidate early to late stage, syn-magmatic to post-crystallization processes. Although the major element and halogen contents of the examined biotite phenocrysts are homogeneous, two-thirds of the grains display trace-element zoning for Ba, Rb, and Cs. The results also indicated that zoning is better retained in larger grains (i.e., > 500 × 500 μm) with minimal alteration and mineral inclusions. An exceptionally well-zoned Li-rich siderophyllite from the Pleasant Ridge topaz granite in southwestern New Brunswick shows Ti, Ta, Sn, W, Cs, Rb, and V (without Li or Ba) zoning. Cesium values increase from 200 to 1400 ppm from core to rim. Conversely, Sn and W values decrease toward the rim (50 to 10 and 100 to 10 ppm, respectively). Tantalum and Ti values show fewer variations but drop abruptly close to the rim of the grain (100 to 20 and 2000 to 500 ppm, respectively). These observations may indicate crystallization of mineral phases with high partition coefficients for these highly incompatible elements (except Ti) (e.g., cassiterite and rutile) followed by fractionation of a fluid phase at a later stage of magma crystallization. The preservation of zoning may indicate rapid cooling post-crystallization of the parent magma.


Author(s):  
Mark Golitko ◽  
Laure Dussubieux

Inductively Coupled Plasma Mass Spectrometry (ICP-MS) is a versatile technique capable of measuring nearly every element on the Periodic Table down to extremely low concentrations. Using liquid sampling, it is a powerful method for bulk compositional characterization but has been only sporadically applied to archaeological ceramic studies. With laser ablation sampling, ICP-MS can be used to produce spatially resolved chemical information and has a wide range of archaeological applications including the analysis of ceramic surface treatments, paste composition, temper composition, and identification of post-burial chemical alteration. ICP-MS and LA-ICP-MS are particularly valuable when used in conjunction with bulk and mineralogical characterization techniques to elucidate which potential cultural, geological, or environmental effects are responsible for bulk compositional patterning, as well as providing complimentary compositional provenance information for individual phases of ceramic paste.


Author(s):  
Nobuyoshi Fujimatsu ◽  
Isao Misu

New method and means are proposed to measure the skin friction force on an aerodynamic surface based on elastic deformations of silicon rubber and gel coatings. One of characteristics is soft and easy to deform. Object is coated by elastic polymeric film with known shear modulus. Two images between wind-on and wind-off are taken using the CCD camera. The displacement of coating is calculated from the correlation of two images. There are two ways to calibrate the skin friction force to the displacement of coatings. These methods are tested and compared to quantitative skin friction force measurement. One is based on measuring the characteristics of the polymeric film using visco-elastic measurement system. This way is called as a priori calibration. The other way is accomplished from the relation between the skin friction force measured by the PHF embedded on the object and the displacement around there and is known as In-situ method. Characteristics of the coatings such as the displacement and the time response can be easily controlled by the compounding ratio of hardener. We conduct the theoretical analysis for the elastic polymer film and propose the material properties of the coatings required to measure the surface skin friction in the wide range of flow speed. The skin friction over the plate is measured using this technique in various Reynolds number. The traditional measurement using the hot wire anemometry is conducted to validate this technique. The time averaged measurements of this technique are in good agreement with the traditional results. However, the unsteady characteristics of surface skin friction are not captured by the lack of time resolution of the CCD camera.


2020 ◽  
Author(s):  
Svetlana Drogobuzhskaya ◽  
Tamara Bayanova ◽  
Andrey Novikov

<p>The laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS) is a unique method for local analysis that allows studying mineral grains in situ. The aims of these geochemical researches are to estimate concentrations and distributions of REE, Hf, U, Th, Y, Ti, PGE and other elements in accessory and ore minerals from complex deposits in the Arctic region (Fennoscandian Shield), using the LA-ICP-MS local analysis of trace elements. Accessory minerals of zircon and baddeleyite are much valued to study distributions of rare and rare earth elements (REE). Besides, pyrite, pentlandite, pyrrhotite and other sulfides are important for determining platinum-group elements (PGE), REE, etc.</p><p>The electron (LEO-1415) and optic (LEICA OM 2500 P, camera DFC 290) spectroscopy have been applied to study the morphology of the samples. Analytical points have been selected on baddeleyite, zircon crystals and sulfide minerals based on analyses of their BSE, CL and optical images. REE, PGE and other elements have been estimated in situ by ICP-MS, using an ELAN 9000 DRC-e (Perkin Elmer) quadrupole mass spectrometer equipped with UP-266 MAСRO laser (New Wave Research).</p><p>More than 19 elements were profiled during each measurement in zircon or baddeleyite. For the first time, LA-ICP-MS techniques have been applied to estimate PGE, REE and other (S, Cr, Fe, Cu, Ni, Co, As, Se, Mo, Cd, Sn, Sb, Re, Te, Tl, Hf, W, Bi, Pb, Th, U) elements in sulfide minerals. NIST 610, NIST 612 and tandem graduation (using solutions), considering sensitivity coefficients of isotopes have been used to check the accuracy of estimations. Fe, Ni and Cu have been used as internal standards, being most evenly distributed elements in minerals, when concentrations of elements in sulphides were calculated. The estimates have been carried out, using inter-laboratory standards of chalcopyrite, pentlandite and pyrrhotite, which had been preliminarily prepared and studied using micro probe analysis (Cameca MS-46).</p><p>These techniques had been used to estimate elements in zircon extracted from basic and acidic rocks of the Lapland belt (1.9 Ga), the Keivy zone (2.7 Ga), the Kandalaksha and Kolvitsa zone (2.45 Ga) and from the Cu-Ni deposit (Terrace, Mt. Nyud, 2.5 Ga). Novel techniques have been used to analyze baddeleyite from rocks of layered PGE intrusions of the Monchegorsk ore area (2.5 Ga) and carbonatites of Kovdor and Vuoriyarvi (380 Ma). Elaborated LA-ICP-MS techniques have been applied to provide in situ measurements of PGE, Au, Ag, siderophile and chalcophile elements in sulphide minerals from the Pechenga and Allarechka Cu-Ni deposits (1.98 Ga), Fedorova Tundra and Severny Kamennik PGE deposits (2.5 Ga).</p><p>The scientific researches are supported by RFBR Grant No 18-05-70082, scientific themes 0226-2019-0032 and 0226-2019-0053.</p>


1996 ◽  
Vol 462 ◽  
Author(s):  
Nicholas E. Pingitore ◽  
Jeff D. Leach ◽  
Joshua Villalobos ◽  
John A. Peterson ◽  
David Hill

ABSTRACTTo evaluate the performance of inductively coupled plasma mass spectrometry (ICP-MS) in determining ceramic provenance, we analyzed 60 elements in 30 ceramic artifacts from six a priori groups from west Texas-southwestern New Mexico. Discriminant function analysis of the ICP-MS elemental data classified all members of the six a priori groups without error. In repeated analyses using 80% of the data as a training set, overall 75% of the withheld specimens were properly classified. Lead isotope ratios, also measured on the ICP-MS, provided an independent partial discrimination between the groups. The results of this study demonstrate that ICP-MS provides multi-element and lead isotopie characterization of archaeological ceramics suitable for provenance determination. ICP-MS is a rapid, in-house, and relatively inexpensive technology and thus is a reasonable alternative to neutron activation analysis (NAA) for compositional studies of archaeological ceramics.


Sign in / Sign up

Export Citation Format

Share Document