scholarly journals Applying a new integrated mass-flux adjustment filter in rapid update cycling of convective-scale data assimilation for the COSMO model (v5.07)

2021 ◽  
Vol 14 (3) ◽  
pp. 1295-1307
Author(s):  
Yuefei Zeng ◽  
Alberto de Lozar ◽  
Tijana Janjic ◽  
Axel Seifert
Keyword(s):  
Data Assimilation ◽  
Mass Flux ◽  
High Surface ◽  
Radar Data ◽  
Flux Divergence ◽  
Cold Pools ◽  
Imbalance Problem ◽  
Promising Tool ◽  
Convective Scale ◽  
Flux Adjustment

Abstract. A new integrated mass-flux adjustment filter is introduced, which uses the analyzed integrated mass-flux divergence field to correct the analyzed wind field. The filter has been examined in twin experiments with rapid update cycling using an idealized setup for convective-scale radar data assimilation. It is found that the new filter slightly reduces the accuracy of background and analysis states; however, it preserves the main structure of cold pools and primary mesocyclone properties of supercells. More importantly, it considerably diminishes spurious mass-flux divergence and the high surface pressure tendency, and it thus results in more dynamically balanced analysis states. For the ensuing 3 h forecasts, the experiment that employs the filter becomes more skillful after 1 h. These preliminary results show that the filter is a promising tool to alleviate the imbalance problem caused by data assimilation, especially for convective-scale applications.

scholarly journals Applying a new integrated mass-flux adjustment filter in rapid update cycling of convective-scale data assimilation for the COSMO-model (v5.07)

2020 ◽  
Author(s):  
Yuefei Zeng ◽  
Alberto de Lozar ◽  
Tijana Janjic ◽  
Axel Seifert
Keyword(s):  
Data Assimilation ◽  
Mass Flux ◽  
Radar Data ◽  
Flux Divergence ◽  
Cold Pools ◽  
Imbalance Problem ◽  
Promising Tool ◽  
Convective Scale ◽  
The One ◽  
Flux Adjustment

Abstract. A new integrated mass-flux adjustment filter that uses the analyzed integrated mass-flux divergence field to correct the analyzed wind field has been introduced in this work. The filter has been examined by twin experiments with rapid update cycling, using an idealized setup for convective-scale radar data assimilation. It is found that the new filter slightly reduce the accuracy of background and analysis states, however, it preserves the main structure of cold pools and primary mesocyclone properties of supercells. More importantly, it considerably diminishes spurious mass-flux divergence and successfully suppresses the increase of the surface pressure tendency in analysis. For the ensuing 3-h forecasts, the one that employes the filter becomes more skillful after one hour. These preliminary results show that the filter is a promising tool to improve the imbalance problem caused by the data assimilation.

scholarly journals A Comparison of Multiscale GSI-Based EnKF and 3DVar Data Assimilation Using Radar and Conventional Observations for Midlatitude Convective-Scale Precipitation Forecasts

2015 ◽  
Vol 143 (8) ◽  
pp. 3087-3108 ◽  
Author(s):  
Aaron Johnson ◽  
Xuguang Wang ◽  
Jacob R. Carley ◽  
Louis J. Wicker ◽  
Christopher Karstens
Keyword(s):  
Data Assimilation ◽  
Multiscale Analysis ◽  
Multiple Scales ◽  
Three Dimensional ◽  
Forecast Period ◽  
Background Error ◽  
Cold Pools ◽  
Error Covariance ◽  
Convective Scale

Abstract A GSI-based data assimilation (DA) system, including three-dimensional variational assimilation (3DVar) and ensemble Kalman filter (EnKF), is extended to the multiscale assimilation of both meso- and synoptic-scale observation networks and convective-scale radar reflectivity and velocity observations. EnKF and 3DVar are systematically compared in this multiscale context to better understand the impacts of differences between the DA techniques on the analyses at multiple scales and the subsequent convective-scale precipitation forecasts. Averaged over 10 diverse cases, 8-h precipitation forecasts initialized using GSI-based EnKF are more skillful than those using GSI-based 3DVar, both with and without storm-scale radar DA. The advantage from radar DA persists for ~5 h using EnKF, but only ~1 h using 3DVar. A case study of an upscale growing MCS is also examined. The better EnKF-initialized forecast is attributed to more accurate analyses of both the mesoscale environment and the storm-scale features. The mesoscale location and structure of a warm front is more accurately analyzed using EnKF than 3DVar. Furthermore, storms in the EnKF multiscale analysis are maintained during the subsequent forecast period. However, storms in the 3DVar multiscale analysis are not maintained and generate excessive cold pools. Therefore, while the EnKF forecast with radar DA remains better than the forecast without radar DA throughout the forecast period, the 3DVar forecast quality is degraded by radar DA after the first hour. Diagnostics revealed that the inferior analysis at mesoscales and storm scales for the 3DVar is primarily attributed to the lack of flow dependence and cross-variable correlation, respectively, in the 3DVar static background error covariance.

scholarly journals Improving the Model Convective Storm Quantitative Precipitation Nowcasting by Assimilating State Variables Retrieved from Multiple-Doppler Radar Observations

2014 ◽  
Vol 142 (11) ◽  
pp. 4017-4035 ◽  
Author(s):  
Yu-Chieng Liou ◽  
Jian-Luen Chiou ◽  
Wei-Hao Chen ◽  
Hsin-Yu Yu
Keyword(s):  
Data Assimilation ◽  
Doppler Radar ◽  
Scale Up ◽  
Three Dimensional ◽  
Radar Data ◽  
State Variables ◽  
Weather System ◽  
Additional Information ◽  
Convective Scale ◽  
Fine Resolution

Abstract This research combines an advanced multiple-Doppler radar synthesis technique with the thermodynamic retrieval method, originally proposed by Gal-Chen, and a moisture/temperature adjustment scheme, and formulates a sequential procedure. The focus is on applying this procedure to improve the model quantitative precipitation nowcasting (QPN) skill in the convective scale up to 3 hours. A series of (observing system simulation experiment) OSSE-type tests and a real case study are conducted to investigate the performance of this algorithm under different conditions. It is shown that by using the retrieved three-dimensional wind, thermodynamic, and microphysical parameters to reinitialize a fine-resolution numerical model, its QPN skill can be significantly improved. Since the Gal-Chen method requires the horizontal average properties of the weather system at each altitude, utilization of in situ radiosonde(s) to obtain this additional information for the retrieval is tested. When sounding data are not available, it is demonstrated that using the model results to replace the role played by observing devices is also a feasible choice. The moisture field is obtained through a simple, but effective, adjusting scheme and is found to be beneficial to the rainfall forecast within the first hour after the reinitialization of the model. Since this algorithm retrieves the unobserved state variables instantaneously from the wind measurements and directly uses them to reinitialize the model, fewer radar data and a shorter model spinup time are needed to correct the rainfall forecasts, in comparison with other data assimilation techniques such as four-dimensional variational data assimilation (4DVAR) or ensemble Kalman filter (EnKF) methods.

scholarly journals A Comparison between the 4DVAR and the Ensemble Kalman Filter Techniques for Radar Data Assimilation

2005 ◽  
Vol 133 (11) ◽  
pp. 3081-3094 ◽  
Author(s):  
A. Caya ◽  
J. Sun ◽  
C. Snyder
Keyword(s):  
Kalman Filter ◽  
Data Assimilation ◽  
Ensemble Kalman Filter ◽  
Forecast Model ◽  
Radar Data ◽  
Forecast Errors ◽  
Error Covariance ◽  
Convective Scale ◽  
Cloud Resolving Model ◽  
Comparable Accuracy

Abstract A four-dimensional variational data assimilation (4DVAR) algorithm is compared to an ensemble Kalman filter (EnKF) for the assimilation of radar data at the convective scale. Using a cloud-resolving model, simulated, imperfect radar observations of a supercell storm are assimilated under the assumption of a perfect forecast model. Overall, both assimilation schemes perform well and are able to recover the supercell with comparable accuracy, given radial-velocity and reflectivity observations where rain was present. 4DVAR produces generally better analyses than the EnKF given observations limited to a period of 10 min (or three volume scans), particularly for the wind components. In contrast, the EnKF typically produces better analyses than 4DVAR after several assimilation cycles, especially for model variables not functionally related to the observations. The advantages of the EnKF in later cycles arise at least in part from the fact that the 4DVAR scheme implemented here does not use a forecast from a previous cycle as background or evolve its error covariance. Possible reasons for the initial advantage of 4DVAR are deficiencies in the initial ensemble used by the EnKF, the temporal smoothness constraint used in 4DVAR, and nonlinearities in the evolution of forecast errors over the assimilation window.

Importance of Horizontally Inhomogeneous Environmental Initial Conditions to Ensemble Storm-Scale Radar Data Assimilation and Very Short-Range Forecasts

2010 ◽  
Vol 138 (4) ◽  
pp. 1250-1272 ◽  
Author(s):  
David J. Stensrud ◽  
Jidong Gao
Keyword(s):  
Data Assimilation ◽  
Short Range ◽  
Doppler Radar ◽  
Environmental Variability ◽  
Initial Conditions ◽  
Radar Data ◽  
Ensemble Member ◽  
Radar Observations ◽  
Convective Scale ◽  
Background Fields

Abstract The assimilation of operational Doppler radar observations into convection-resolving numerical weather prediction models for very short-range forecasting represents a significant scientific and technological challenge. Numerical experiments over the past few years indicate that convective-scale forecasts are sensitive to the details of the data assimilation methodology, the quality of the radar data, the parameterized microphysics, and the storm environment. In this study, the importance of horizontal environmental variability to very short-range (0–1 h) convective-scale ensemble forecasts initialized using Doppler radar observations is investigated for the 4–5 May 2007 Greensburg, Kansas, tornadic thunderstorm event. Radar observations of reflectivity and radial velocity from the operational Doppler radar network at 0230 UTC 5 May 2007, during the time of the first large tornado, are assimilated into each ensemble member using a three-dimensional variational data assimilation system (3DVAR) developed at the Center for Analysis and Prediction of Storms (CAPS). Very short-range forecasts are made using the nonhydrostatic Advanced Regional Prediction System (ARPS) model from each ensemble member and the results are compared with the observations. Explicit three-dimensional environmental variability information is provided to the convective-scale ensemble using analyses from a 30-km mesoscale ensemble data assimilation system. Comparisons between convective-scale ensembles with initial conditions produced by 3DVAR using 1) background fields that are horizontally homogeneous but vertically inhomogeneous (i.e., have different vertical environmental profiles) and 2) background fields that are horizontally and vertically inhomogeneous are undertaken. Results show that the ensemble with horizontally and vertically inhomogeneous background fields provides improved predictions of thunderstorm structure, mesocyclone track, and low-level circulation track than the ensemble with horizontally homogeneous background fields. This suggests that knowledge of horizontal environmental variability is important to successful convective-scale ensemble predictions and needs to be included in real-data experiments.

scholarly journals A Case Study on the Impact of Ensemble Data Assimilation with GNSS-Zenith Total Delay and Radar Data on Heavy Rainfall Prediction

2020 ◽  
Vol 148 (3) ◽  
pp. 1075-1098 ◽  
Author(s):  
Shu-Chih Yang ◽  
Zih-Mao Huang ◽  
Ching-Yuang Huang ◽  
Chih-Chien Tsai ◽  
Ta-Kang Yeh
Keyword(s):  
Data Assimilation ◽  
Heavy Rainfall ◽  
Weather Prediction ◽  
Radar Data ◽  
Total Delay ◽  
Ensemble Data Assimilation ◽  
Zenith Total Delay ◽  
Ensemble Data ◽  
Convective Scale ◽  
The Impact

Abstract The performance of a numerical weather prediction model using convective-scale ensemble data assimilation with ground-based global navigation satellite systems-zenith total delay (ZTD) and radar data is investigated on a heavy rainfall event that occurred in Taiwan on 10 June 2012. The assimilation of ZTD and/or radar data is performed using the framework of the WRF local ensemble transform Kalman filter with a model grid spacing of 2 km. Assimilating radar data is beneficial for predicting the rainfall intensity of this local event but produces overprediction in southern Taiwan and underprediction in central Taiwan during the first 3 h. Both errors are largely overcome by assimilating ZTD data to improve mesoconvective-scale moisture analyses. Consequently, assimilating both the ZTD and radar data show advantages in terms of the location and intensity of the heavy rainfall. Sensitivity experiments involving this event indicate that the impact of ZTD data is improved by using a broader horizontal localization scale than the convective scale used for radar data assimilation. This optimization is necessary in order to consider more fully the network density of the ZTD observations and the horizontal scale of the moisture transport by the southwesterly flow in this case.

scholarly journals Assimilating visible satellite reflectances in combination with radar data in a pre-operational convective-scale seamless prediction system 

2021 ◽  
Author(s):  
Liselotte Bach ◽  
Thomas Deppisch ◽  
Leonhard Scheck ◽  
Alberto de Lozar ◽  
Christian Welzbacher ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Bias Correction ◽  
Weather Prediction ◽  
Radar Data ◽  
Observation Error ◽  
Major Step ◽  
Observation Systems ◽  
Seamless Transition ◽  
Convective Scale ◽  
Nwp Model

<p>In the framework of the SINFONY project at Deutscher Wetterdienst (DWD) we have developed data assimilation of visible satellite reflectances of the SEVIRI instrument (MSG) and radar observations in a rapid update cycle (ICON-D2-KENDA-RUC) which will be running in a first 24/7-testsuite starting in spring of this year. Our major goal related to the assimilation of these new observation systems is to improve the positioning of cloud and precipitation systems and their intensities, needed for the seamless transition of radar nowcasting to numerical weather prediction (NWP) in our SINFONY system. We give an overview of the steps undertaken in the course of developing the data assimilation of visible satellite reflectances. This includes quality control, observation error modelling, data reduction and bias correction of the reflectances. Further development and enhancement of the forward operator MFASIS is still ongoing. A major step to allow for a successful assimilation has been the improvement of microphysical consistency between the NWP model and MFASIS both with 1-moment and 2-moment microphysics to reduce the bias of first-guess departures. To further enhance and stabilize the agreement of observations and model climatologies over the course of the year and different weather regimes, an innovative histogram-based bias correction has been developed. We show results of data assimilation experiments combining visible reflectances and radar data in the ICON-D2-KENDA-Rapid Update Cycle using 2-moment microphysics. Further, we discuss the improvement of forecast skill from both observing systems and the way they complement each other – putting special emphasis to the key variable of interest in the SINFONY system, namely radar reflectivity.</p>

scholarly journals Assimilation of Radar Data, Pseudo Water Vapor, and Potential Temperature in a 3DVAR Framework for Improving Precipitation Forecast of Severe Weather Events

Atmosphere ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 182
Author(s):  
Anwei Lai ◽  
Jinzhong Min ◽  
Jidong Gao ◽  
Hedi Ma ◽  
Chunguang Cui ◽  
...  
Keyword(s):  
Water Vapor ◽  
Data Assimilation ◽  
Potential Temperature ◽  
Radar Data ◽  
Severe Weather ◽  
Moist Convection ◽  
Meiyu Front ◽  
Weather Events ◽  
Convective Scale ◽  
Deep Moist Convection

An improved approach to derive pseudo water vapor mass mixing ratio and in- cloud potential temperature was developed in this paper to better initialize numerical weather prediction (NWP) and build convective-scale predictions of severe weather events. The process included several steps. The first was to identify areas of deep moist convection, utilizing Vertically Integrated Liquid water (VIL) derived from a mosaicked 3D radar reflectivity field. Then, pseudo- water vapor and pseudo- in- cloud potential temperature observations were derived based on the VIL. For potential temperature, the latent heat initialization for stratiform cloud and moist adiabatic initialization for deep moist convection were used based on a cloud analysis method. The third step was to assimilate the derived pseudo- water vapor and potential temperature observations, together with radar radial velocity and reflectivity into a convective-scale NWP model during data assimilation cycles spanning several hours. Finally, 3-h forecasts were launched each hour during the data assimilation period. The effects of radar data and pseudo- observation assimilation on the prediction of rainfall associated with convective systems surrounding the Meiyu front in 2018 were explored using two real cases. Two sets of experiments, each including several experiments in each real case, were designed to compare the effects of assimilation radar and pseudo- observations on the ensuing forecasts. Relative to the control experiment without data assimilation and radar experiment, the analyses and forecasts of convections were found to be improved for the two Meiyu front cases after pseudo- water vapor and potential temperature information was assimilated.

An idealized Testbed for Radar Data Assimilation

2020 ◽  
Author(s):  
Yuefei Zeng ◽  
Tijana Janjic ◽  
Alberto de Lozar ◽  
Ulrich Blahak ◽  
Axel Seifert
Keyword(s):  
Data Assimilation ◽  
Initial Conditions ◽  
Numerical Models ◽  
Radar Data ◽  
Observation Error ◽  
Supercell Storm ◽  
Highly Nonlinear ◽  
Convective Scale ◽  
Radar Data Assimilation ◽  
Made In

<p> </p> <pre class="moz-quote-pre">Data assimilation on the convective scale uses high-resolution numerical models of the atmosphere that resolve highly nonlinear dynamics and physics. These non-hydrostatic, convection permitting models are in short runs very sensitive to proper initial conditions. <br />However, the estimation of initial conditions is hampered by assumptions made in data assimilation algorithms <br />and in their models of the observation error and model error uncertainty. Within this work, an idealized testbed <br />for Radar Data Assimilation has been developed, which uses Kilometre-scale ENsemble Data Assimilation (KENDA) system <br />of the (Deutscher Wetterdienst) DWD. A series of data assimilation experiments for a supercell storm are conducted. <br />The sensitivity to the configurations of the radar forward operator and specification of the observation error <br />is investigated. Moreover, impacts of different observations (radial wind, reflectivity or both) <br />on the performance of data assimilation cycles and 6-h forecasts are shown, for instance, <br />the preservation of divergence, vorticity and mass of hydrometeors, compared to the nature run is of special interest.</pre> <p> </p>

Sign in / Sign up

Export Citation Format

Share Document