scholarly journals Comprehensive Automobile Research System (CARS) – a Python-based Automobile Emissions Inventory Model

2021 ◽  
Author(s):  
Bok H. Baek ◽  
Rizzieri Pedruzzi ◽  
Minwoo Park ◽  
Chi-Tsan Wang ◽  
Younha Kim ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Nox Emissions ◽  
Research System ◽  
Automobile Emissions ◽  
Emissions Inventory ◽  
Average Speed ◽  
Diesel Vehicles ◽  
Gasoline Vehicles ◽  
Mobile Emissions ◽  
Road Type

Abstract. The Comprehensive Automobile Research System (CARS) is an open-source python-based automobile emissions inventory model designed to efficiently estimate high quality emissions from motor-vehicle emission sources. It can estimate the criteria air pollutants, greenhouse gases, and air toxics in various temporal resolutions at the national, state, county, and any spatial resolution based on the spatiotemporal resolutions of input datasets. The CARS is designed to utilize the local vehicle activity database, such as vehicle travel distance, road link-level network Geographic Information System (GIS) information, and vehicle-specific average speed by road type, to generate a temporally and spatially enhanced automobile emissions inventory for policymakers, stakeholders, and the air quality modeling community. The CARS model adopted the European Environment Agency's (EEA) onroad automobile emissions calculation methodologies to estimate the hot exhaust, cold start, and evaporative emissions from onroad automobile sources. It can optionally utilize road link-specific average speed distribution (ASD) inputs to reflect more realistic vehicle speed variations by road type than a road-specific single averaged speed approach. Also, utilizing high-resolution road GIS data allows the CARS to estimate the road link-level emissions to improve the inventory's spatial resolution. When we compared the official 2015 national mobile emissions from Korea's Clean Air Policy Support System (CAPSS) against the ones estimated by the CARS, there is a moderate increase of VOC (33 %), CO (52 %), and fine particulate matter (PM2.5) (15 %) emissions while NOx and SOx are reduced by 24 % and 17 % in the CARS estimates. The main differences are driven by the usage of different vehicle activities and the incorporation of road-specific ASD, which plays a critical role in hot exhaust emission estimates but wasn’t implemented in Korea’s CAPSS mobile emissions inventory. While 52% of vehicles use gasoline fuel and 35 % use diesel, gasoline vehicles only contribute 7.7 % of total NOx emissions while diesel vehicles contribute 85.3 %. But for VOC emissions, gasoline vehicles contribute 52.1 % while diesel vehicles are limited to 23 %. While diesel buses are only 0.3 % of vehicles, each vehicle has the largest contribution to NOx emissions (8.51 % of NOx total) due to its longest daily VKT. For VOC, CNG buses are the largest contributor with 19.5 % of total VOC emissions. It indicates that the CNG bus is better for the rural area while the diesel bus is better applicable for the urban area for a better ozone control strategy because the rural area is usually NOx limited for ozone formation and urban area is VOC limited region. For primary PM2.5, more than 98.5 % is from diesel vehicles. The CARS model's in-depth analysis feature can assist government policymakers and stakeholders develop the best emission abatement strategies.

scholarly journals Impact of the Mobility Restrictions in the Palestinian Territory on the Population and the Environment

2021 ◽  
Vol 13 (23) ◽  
pp. 13457
Author(s):  
Hala Aburas ◽  
Isam Shahrour
Keyword(s):  
Energy Consumption ◽  
Quantitative Analysis ◽  
Literature Review ◽  
Co2 Emissions ◽  
Average Value ◽  
Diesel Vehicles ◽  
Mobility Barriers ◽  
Gasoline Vehicles ◽  
Palestinian Territory ◽  
The Impact

This paper analyzes the mobility restrictions in the Palestinian territory on the population and the environment. The literature review shows a scientific concern for this issue, with an emphasis on describing mobility barriers and the severe conditions experienced by the population due to these barriers as well as the impact of mobility restrictions on employment opportunities. On the other hand, the literature review also shows a deficit in quantitative analysis of the effects of mobility restrictions on the environment, particularly on energy consumption and greenhouse gas emissions. This paper aims to fill this gap through a quantitative analysis by including data collection about mobility restrictions, using network analysis to determine the impact of these restrictions on inter-urban mobility, and analysis of the resulting energy consumption and CO2 emissions. The results show that mobility restrictions induce a general increase in energy consumption and CO2 emissions. The average value of this increase is about 358% for diesel vehicles and 275% for gasoline vehicles.

scholarly journals On-Board Sensor-Based NOx Emissions from Heavy-Duty Diesel Vehicles

2019 ◽  
Vol 53 (9) ◽  
pp. 5504-5511 ◽  
Author(s):  
Yi Tan ◽  
Paul Henderick ◽  
Seungju Yoon ◽  
Jorn Herner ◽  
Thomas Montes ◽  
...  
Keyword(s):  
Nox Emissions ◽  
Heavy Duty ◽  
Diesel Vehicles ◽  
Heavy Duty Diesel

scholarly journals Characterizing Black Carbon Emissions from Gasoline, LPG, and Diesel Vehicles via Transient Chassis-Dynamometer Tests

2020 ◽  
Vol 10 (17) ◽  
pp. 5856
Author(s):  
Gyutae Park ◽  
Kyunghoon Kim ◽  
Taehyun Park ◽  
Seokwon Kang ◽  
Jihee Ban ◽  
...  
Keyword(s):  
Black Carbon ◽  
Coal Combustion ◽  
Gasoline Direct Injection ◽  
Environmental Research ◽  
Particulate Filter ◽  
Biomass Combustion ◽  
Liquefied Petroleum Gas ◽  
Chassis Dynamometer ◽  
Diesel Vehicles ◽  
Gasoline Vehicles

With global anthropogenic black carbon (BC) emissions increasing, automobiles are significantly contributing as the major source of emissions. However, the appropriate regulations of BC emissions from vehicles are not in place. This study examined BC emissions following fuel types (gasoline, liquefied petroleum gas (LPG), and diesel) and engine combustion (gasoline direct injection (GDI) and multi-port injection (MPI) for gasoline vehicles) with emission regulations. To this end, chassis dynamometer and aethalometer (AE33) were used. Driving modes created by the National Institute of Environmental Research (NIER) and emission certification modes (CVS-75 and NEDC) for vehicles in Korea were used to determine BC emissions for various vehicle speeds. In addition, the contributions of biomass and coal combustion to the data of AE33 were analyzed to determine the possibility of tracking the BC sources. MPI, LPG, and EURO 6 with diesel particulate filter (DPF) vehicles emitted the lowest BC emissions in NIER modes. Among gasoline vehicles, MPI vehicles showed the lower BC content in PM emissions. Also, older vehicles in MPI vehicles emitted the high PM and BC emissions. The BC emissions of EURO 3 vehicles without DPF were the highest as the results of previous studies, and it was found that as emissions regulations were tightened, the level of BC results of diesel vehicles became similar with MPI vehicles. The average absorption Ångström exponent (AAE) from difference emissions sources were biomass combustion (oak wood) > coal combustion (the power plant stack) > automobile emissions (gasoline, LPG, diesel).

scholarly journals A top-down assessment using OMI NO2 suggests an underestimate in the NOx emissions inventory in Seoul, South Korea during KORUS-AQ

2018 ◽  
Author(s):  
Daniel L. Goldberg ◽  
Pablo E. Saide ◽  
Lok N. Lamsal ◽  
Benjamin de Foy ◽  
Zifeng Lu ◽  
...  
Keyword(s):  
South Korea ◽  
Emission Rate ◽  
Model Simulation ◽  
Nox Emission ◽  
Metropolitan Region ◽  
Nox Emissions ◽  
Top Down ◽  
Bottom Up ◽  
Field Campaign ◽  
Emissions Inventory

Abstract. In this work, we investigate the NOx emissions inventory in Seoul, South Korea using a regional NASA Ozone Monitoring Instrument (OMI) NO2 product. We first develop a regional OMI NO2 product by re-calculating the air mass factors using a high-resolution (4 × 4 km2) WRF-Chem model simulation, which better captures the NO2 shape profiles in urban regions. We then apply a model-derived spatial averaging kernel to further downscale the retrieval and account for the sub-pixel variability. These two modifications yield OMI NO2 values in the regional product that are 1.37 larger in the Seoul metropolitan region and > 2 times larger near large industrial sources. These two modifications also yield an OMI NO2 product that is in better agreement with the Pandora NO2 spectrometer measurements acquired during the Korea U.S.-Air Quality (KORUS-AQ) field campaign. NOx emissions are then derived for the Seoul metropolitan area during the KORUS-AQ field campaign using a top-down approach with the standard and regional NASA OMI NO2 products. We first apply the top-down approach to a model simulation to ensure that the method is appropriate: the WRF-Chem simulation utilizing the bottom-up emission inventory yields a NOx emission rate of 227 ± 94 kton/yr, while the bottom-up inventory itself yields a NOx emission rate of 198 kton/yr. Using the top-down approach on the regional OM NO2 product, we derive the NOx emissions rate from Seoul to be 484 ± 201 kton/yr, and a 353 ± 146 kton/yr NOx emissions rate using the standard NASA OMI NO2 product. This suggests an underestimate of 53 % and 36 % using the regional and standard NASA OMI NO2 products respectively. To supplement this finding, we compare the NO2 simulated by WRF-Chem to observations of the same quantity acquired by aircraft and find a model underestimate. When NOx emissions in the WRF-Chem model are doubled, there is better agreement with KORUS-AQ aircraft observations. Although the current work is focused on South Korea using OMI, the methodology developed in this work can be applied to other world regions using TROPOMI and future satellite datasets (e.g., GEMS and TEMPO) to produce high-quality region-specific top-down NOx emission estimates.

scholarly journals Comparisons of Laboratory and On-Road Type-Approval Cycles with Idling Emissions. Implications for Periodical Technical Inspection (PTI) Sensors

Sensors ◽  
2020 ◽  
Vol 20 (20) ◽  
pp. 5790 ◽  
Author(s):  
Barouch Giechaskiel ◽  
Tero Lähde ◽  
Ricardo Suarez-Bertoa ◽  
Victor Valverde ◽  
Michael Clairotte
Keyword(s):  
Direct Injection ◽  
Spark Ignition ◽  
Gasoline Direct Injection ◽  
Compression Ignition ◽  
Particulate Filters ◽  
Technical Inspection ◽  
Diesel Vehicles ◽  
Type Approval ◽  
Road Type ◽  
Technical Specifications

For the type approval of compression ignition (diesel) and gasoline direct injection vehicles, a particle number (PN) limit of 6 × 1011 p/km is applicable. Diesel vehicles in circulation need to pass a periodical technical inspection (PTI) test, typically every two years, after the first four years of circulation. However, often the applicable smoke tests or on-board diagnostic (OBD) fault checks cannot identify malfunctions of the diesel particulate filters (DPFs). There are also serious concerns that a few high emitters are responsible for the majority of the emissions. For these reasons, a new PTI procedure at idle run with PN systems is under investigation. The correlations between type approval cycles and idle emissions are limited, especially for positive (spark) ignition vehicles. In this study the type approval PN emissions of 32 compression ignition and 56 spark ignition vehicles were compared to their idle PN concentrations from laboratory and on-road tests. The results confirmed that the idle test is applicable for diesel vehicles. The scatter for the spark ignition vehicles was much larger. Nevertheless, the proposed limit for diesel vehicles was also shown to be applicable for these vehicles. The technical specifications of the PTI sensors based on these findings were also discussed.

Damages and Expected Deaths Due to Excess NOx Emissions from 2009 to 2015 Volkswagen Diesel Vehicles

2016 ◽  
Vol 50 (3) ◽  
pp. 1111-1117 ◽  
Author(s):  
Stephen P. Holland ◽  
Erin T. Mansur ◽  
Nicholas Z. Muller ◽  
Andrew J. Yates
Keyword(s):  
Nox Emissions ◽  
Diesel Vehicles

scholarly journals Evaluation of mobile emissions contributions to Mexico City's emissions inventory using on-road and cross-road emission measurements and ambient data

2009 ◽  
Vol 9 (17) ◽  
pp. 6305-6317 ◽  
Author(s):  
M. Zavala ◽  
S. C. Herndon ◽  
E. C. Wood ◽  
T. B. Onasch ◽  
W. B. Knighton ◽  
...  
Keyword(s):  
Measurement Techniques ◽  
Early Morning ◽  
Emission Factors ◽  
Top Down ◽  
Bottom Up ◽  
Emissions Inventory ◽  
Mobile Sources ◽  
Mobile Emissions ◽  
The City ◽  
Road Emission

Abstract. Mobile emissions represent a significant fraction of the total anthropogenic emissions burden in the Mexico City Metropolitan Area (MCMA) and, therefore, it is crucial to use top-down techniques informed by on-road exhaust measurements to evaluate and improve traditional bottom-up official emissions inventory (EI) for the city. We present the measurements of on-road fleet-average emission factors obtained using the Aerodyne mobile laboratory in the MCMA in March 2006 as part of the MILAGRO/MCMA-2006 field campaign. A comparison of our on-road emission measurements with those obtained in 2003 using essentially the same measurement techniques and analysis methods indicates that, in the three year span, NO emission factors remain within the measured variability ranges whereas emission factors of aldehydes and aromatics species were reduced for all sampled driving conditions. We use a top-down fuel-based approach to evaluate the mobile emissions from the gasoline fleet estimated in the bottom-up official 2006 MCMA mobile sources. Within the range of measurement uncertainties, we found probable slight overpredictions of mean EI estimates on the order of 20–28% for CO and 14–20% for NO. However, we identify a probable EI discrepancy of VOC mobile emissions between 1.4 and 1.9; although estimated benzene and toluene mobile emissions in the inventory seem to be well within the uncertainties of the corresponding emissions estimates. Aldehydes mobile emissions in the inventory, however, seem to be underpredicted by factors of 3 for HCHO and 2 for CH3CHO. Our on-road measurement-based estimate of annual emissions of organic mass from PM1 particles suggests a severe underprediction (larger than a factor of 4) of PM2.5 mobile emissions in the inventory. Analyses of ambient CO, NOx and CO/NOx concentration trends in the MCMA indicate that the early morning ambient CO/NOx ratio has decreased at a rate of about 1.9 ppm/ppm/year over the last two decades due to reductions in CO levels rather than by NOx. These trends, together with the analysis of fuel sales and fleet size, suggest that the relative contribution of diesel vehicles to overall NOx levels has increased over time in the city. Despite the impressive increase in the size of the vehicle fleet between 2000 and 2006, the early morning ambient concentrations of CO and NOx have not increased accordingly, probably due to the reported low removal rates of older vehicles, which do not have emissions control technologies, and partially due to the much lower emissions from newer gasoline vehicles. This indicates that an emission-based air quality improvement strategy targeting large reductions of emissions from mobile sources should be directed towards a significant increase of the removal rate of older, highly-polluting, vehicles.

Sign in / Sign up

Export Citation Format

Share Document