scholarly journals A test of an optimal stomatal conductance scheme within the CABLE land surface model

2015 ◽  
Vol 8 (2) ◽  
pp. 431-452 ◽  
Author(s):  
M. G. De Kauwe ◽  
J. Kala ◽  
Y.-S. Lin ◽  
A. J. Pitman ◽  
B. E. Medlyn ◽  
...  
Keyword(s):  
Stomatal Conductance ◽  
Land Surface ◽  
Model Performance ◽  
Land Surface Model ◽  
Surface Model ◽  
Model Parameters ◽  
Plant Water ◽  
Plant Water Use ◽  
Bioclimatic Variables ◽  
Small Model

Abstract. Stomatal conductance (gs) affects the fluxes of carbon, energy and water between the vegetated land surface and the atmosphere. We test an implementation of an optimal stomatal conductance model within the Community Atmosphere Biosphere Land Exchange (CABLE) land surface model (LSM). In common with many LSMs, CABLE does not differentiate between gs model parameters in relation to plant functional type (PFT), but instead only in relation to photosynthetic pathway. We constrained the key model parameter "g1", which represents plant water use strategy, by PFT, based on a global synthesis of stomatal behaviour. As proof of concept, we also demonstrate that the g1 parameter can be estimated using two long-term average (1960–1990) bioclimatic variables: (i) temperature and (ii) an indirect estimate of annual plant water availability. The new stomatal model, in conjunction with PFT parameterisations, resulted in a large reduction in annual fluxes of transpiration (~ 30% compared to the standard CABLE simulations) across evergreen needleleaf, tundra and C4 grass regions. Differences in other regions of the globe were typically small. Model performance against upscaled data products was not degraded, but did not noticeably reduce existing model–data biases. We identified assumptions relating to the coupling of the vegetation to the atmosphere and the parameterisation of the minimum stomatal conductance as areas requiring further investigation in both CABLE and potentially other LSMs. We conclude that optimisation theory can yield a simple and tractable approach to predicting stomatal conductance in LSMs.

scholarly journals A test of an optimal stomatal conductance scheme within the CABLE Land Surface Model

2014 ◽  
Vol 7 (5) ◽  
pp. 6845-6891 ◽  
Author(s):  
M. G. De Kauwe ◽  
J. Kala ◽  
Y.-S. Lin ◽  
A. J. Pitman ◽  
B. E. Medlyn ◽  
...  
Keyword(s):  
Stomatal Conductance ◽  
Land Surface ◽  
Model Performance ◽  
Land Surface Model ◽  
Surface Model ◽  
Model Parameters ◽  
Bioclimatic Variables ◽  
Small Model ◽  
Land Exchange

Abstract. Stomatal conductance (gs) affects the fluxes of carbon, energy and water between the vegetated land surface and the atmosphere. We test an implementation of an optimal stomatal conductance model within the Community Atmosphere Biosphere Land Exchange (CABLE) land surface model (LSM). In common with many LSMs, CABLE does not differentiate between gs model parameters in relation to plant functional type (PFT), but instead only in relation to photosynthetic pathway. We therefore constrained the key model parameter "g1" which represents a plants water use strategy by PFT based on a global synthesis of stomatal behaviour. As proof of concept, we also demonstrate that the g1 parameter can be estimated using two long-term average (1960–1990) bioclimatic variables: (i) temperature and (ii) an indirect estimate of annual plant water availability. The new stomatal models in conjunction with PFT parameterisations resulted in a large reduction in annual fluxes of transpiration (~ 30% compared to the standard CABLE simulations) across evergreen needleleaf, tundra and C4 grass regions. Differences in other regions of the globe were typically small. Model performance when compared to upscaled data products was not degraded, though the new stomatal conductance scheme did not noticeably change existing model-data biases. We conclude that optimisation theory can yield a simple and tractable approach to predicting stomatal conductance in LSMs.

scholarly journals ORCHIDEE-MICT (revision 4126), a land surface model for the high-latitudes: model description and validation

2017 ◽  
Author(s):  
Matthieu Guimberteau ◽  
Dan Zhu ◽  
Fabienne Maignan ◽  
Ye Huang ◽  
Chao Yue ◽  
...  
Keyword(s):  
High Latitude ◽  
Land Surface ◽  
Model Performance ◽  
Land Surface Model ◽  
Co2 Flux ◽  
Model Description ◽  
Surface Model ◽  
Model Parameters ◽  
Terrestrial Environment ◽  
Temperature Bias

Abstract. The high-latitude regions of the northern hemisphere are a nexus for the interaction between land surface physical properties and their exchange of carbon and energy with the atmosphere. At these latitudes, two carbon pools of planetary significance – those of the permanently frozen soils (permafrost), and of the great expanse of boreal forest – are vulnerable to destabilization in the face of currently observed climatic warming, the speed and intensity of which are expected to increase with time. Improved projections of future Arctic and boreal ecosystem transformation require improved land surface models that integrate processes specific to these cold biomes. To this end, this study lays out relevant new parameterizations in the ORCHIDEE-MICT land surface model. These describe the interactions between soil carbon, soil temperature and hydrology, and their resulting feedbacks on water and CO2 fluxes, in addition to a recently-developed fire module. Outputs from ORCHIDEE-MICT, when forced by two climate input data sets, are extensively evaluated against: (i) temperature gradients between the atmosphere and deep soils; (ii) the hydrological components comprising the water balance of the largest high-latitude basins, and (iii) CO2 flux and carbon stock observations. The model performance is good with respect to empirical data, despite a simulated excessive plant water stress and a positive land surface temperature bias. In addition, acute model sensitivity to the choice of input forcing data suggests that the calibration of model parameters is strongly forcing-dependent. Overall, we suggest that this new model design is at the forefront of current efforts to reliably estimate future perturbations to the high-latitude terrestrial environment.

scholarly journals ORCHIDEE-MICT (v8.4.1), a land surface model for the high latitudes: model description and validation

2018 ◽  
Vol 11 (1) ◽  
pp. 121-163 ◽  
Author(s):  
Matthieu Guimberteau ◽  
Dan Zhu ◽  
Fabienne Maignan ◽  
Ye Huang ◽  
Chao Yue ◽  
...  
Keyword(s):  
High Latitude ◽  
Land Surface ◽  
Model Performance ◽  
Land Surface Model ◽  
Co2 Flux ◽  
Model Description ◽  
Surface Model ◽  
Model Parameters ◽  
Terrestrial Environment ◽  
Temperature Bias

Abstract. The high-latitude regions of the Northern Hemisphere are a nexus for the interaction between land surface physical properties and their exchange of carbon and energy with the atmosphere. At these latitudes, two carbon pools of planetary significance – those of the permanently frozen soils (permafrost), and of the great expanse of boreal forest – are vulnerable to destabilization in the face of currently observed climatic warming, the speed and intensity of which are expected to increase with time. Improved projections of future Arctic and boreal ecosystem transformation require improved land surface models that integrate processes specific to these cold biomes. To this end, this study lays out relevant new parameterizations in the ORCHIDEE-MICT land surface model. These describe the interactions between soil carbon, soil temperature and hydrology, and their resulting feedbacks on water and CO2 fluxes, in addition to a recently developed fire module. Outputs from ORCHIDEE-MICT, when forced by two climate input datasets, are extensively evaluated against (i) temperature gradients between the atmosphere and deep soils, (ii) the hydrological components comprising the water balance of the largest high-latitude basins, and (iii) CO2 flux and carbon stock observations. The model performance is good with respect to empirical data, despite a simulated excessive plant water stress and a positive land surface temperature bias. In addition, acute model sensitivity to the choice of input forcing data suggests that the calibration of model parameters is strongly forcing-dependent. Overall, we suggest that this new model design is at the forefront of current efforts to reliably estimate future perturbations to the high-latitude terrestrial environment.

scholarly journals Investigating the Ability of a Land Surface Model to Simulate Streamflow with the Accuracy of Hydrological Models: A Case Study Using MOPEX Materials

2009 ◽  
Vol 10 (5) ◽  
pp. 1128-1150 ◽  
Author(s):  
Olga N. Nasonova ◽  
Yeugeniy M. Gusev ◽  
Yeugeniy E. Kovalev
Keyword(s):  
Land Surface ◽  
Random Search ◽  
Model Performance ◽  
Land Surface Model ◽  
Surface Model ◽  
Model Parameters ◽  
Hydrological Models ◽  
Physical Constraints ◽  
Daily Streamflow ◽  
Automated Optimization

Abstract In the Model Parameter Estimation Experiment (MOPEX) project, after calibration of model parameters, complex rainfall–runoff hydrological models (HMs) simulated streamflow better than land surface models (LSMs), including the Soil–Water–Atmosphere–Plant (SWAP) model. A possible explanation for this is that the LSMs may not have been well calibrated. To test this statement, different strategies to calibrate SWAP using daily streamflow from 12 MOPEX basins were investigated. Optimization of parameter values was performed using a combination of an automated optimization algorithm and manual efforts. For automated optimization, two different global optimization algorithms were used: 1) a random search technique and 2) a shuffled complex evolution method developed by the University of Arizona (SCE-UA). Two objective functions, based on the Nash–Sutcliffe coefficient of efficiency and the mean systematic error, were applied. The number of calibrated parameters ranged from 10 to 15. All adjusted parameters were kept within a reasonable range so as not to violate physical constraints while providing a close match between simulated and measured daily streamflow. The results of streamflow simulations with different sets of optimal parameters were compared with each other, with observations, and with simulation results obtained by the HMs that participated in the MOPEX project. The new SWAP calibration strategies resulted in significant improvement of SWAP streamflow simulations, which came close to the best HM results. It was confirmed that model performance depends greatly on the calibration strategy and that the land surface model SWAP, with appropriate calibration, can simulate runoff with the accuracy that is comparable to the accuracy of hydrological models.

L'apport de la télédétection spatiale à la modélisation des surfaces continentales

2020 ◽  
pp. 052
Author(s):  
Jean-Christophe Calvet ◽  
Jean-Louis Champeaux
Keyword(s):  
Satellite Data ◽  
Land Surface ◽  
Land Surface Model ◽  
Static Model ◽  
Geographic Information ◽  
Surface Model ◽  
Model Parameters

Cet article présente les différentes étapes des développements réalisés au CNRM des années 1990 à nos jours pour spatialiser à diverses échelles les simulations du modèle Isba des surfaces terrestres. Une attention particulière est portée sur l'intégration, dans le modèle, de données satellitaires permettant de caractériser la végétation. Deux façons complémentaires d'introduire de l'information géographique dans Isba sont présentées : cartographie de paramètres statiques et intégration au fil de l'eau dans le modèle de variables observables depuis l'espace. This paper presents successive steps in developments made at CNRM from the 1990s to the present-day in order to spatialize the simulations of the Isba land surface model at various scales. The focus is on the integration in the model of satellite data informative about vegetation. Two complementary ways to integrate geographic information in Isba are presented: mapping of static model parameters and sequential assimilation of variables observable from space.

scholarly journals Benchmarking and Process Diagnostics of Land Models

2018 ◽  
Vol 19 (11) ◽  
pp. 1835-1852 ◽  
Author(s):  
Grey S. Nearing ◽  
Benjamin L. Ruddell ◽  
Martyn P. Clark ◽  
Bart Nijssen ◽  
Christa Peters-Lidard
Keyword(s):  
Land Surface ◽  
Model Performance ◽  
Land Surface Model ◽  
Surface Model ◽  
Process Diagnostics ◽  
Surface Energy Fluxes ◽  
Structural Error ◽  
Intercomparison Project ◽  
Parameter Values ◽  
Process Level

Abstract We propose a conceptual and theoretical foundation for information-based model benchmarking and process diagnostics that provides diagnostic insight into model performance and model realism. We benchmark against a bounded estimate of the information contained in model inputs to obtain a bounded estimate of information lost due to model error, and we perform process-level diagnostics by taking differences between modeled versus observed transfer entropy networks. We use this methodology to reanalyze the recent Protocol for the Analysis of Land Surface Models (PALS) Land Surface Model Benchmarking Evaluation Project (PLUMBER) land model intercomparison project that includes the following models: CABLE, CH-TESSEL, COLA-SSiB, ISBA-SURFEX, JULES, Mosaic, Noah, and ORCHIDEE. We report that these models (i) use only roughly half of the information available from meteorological inputs about observed surface energy fluxes, (ii) do not use all information from meteorological inputs about long-term Budyko-type water balances, (iii) do not capture spatial heterogeneities in surface processes, and (iv) all suffer from similar patterns of process-level structural error. Because the PLUMBER intercomparison project did not report model parameter values, it is impossible to know whether process-level error patterns are due to model structural error or parameter error, although our proposed information-theoretic methodology could distinguish between these two issues if parameter values were reported. We conclude that there is room for significant improvement to the current generation of land models and their parameters. We also suggest two simple guidelines to make future community-wide model evaluation and intercomparison experiments more informative.

scholarly journals Development and application of the WRFPLUS-Chem online chemistry adjoint and WRFDA-Chem assimilation system

2015 ◽  
Vol 8 (6) ◽  
pp. 1857-1876 ◽  
Author(s):  
J. J. Guerrette ◽  
D. K. Henze
Keyword(s):  
Land Surface ◽  
Vertical Mixing ◽  
Model Performance ◽  
Land Surface Model ◽  
Sensitivity Study ◽  
Climate Impacts ◽  
Surface Model ◽  
Time Period ◽  
Develop Land ◽  
The Impact

Abstract. Here we present the online meteorology and chemistry adjoint and tangent linear model, WRFPLUS-Chem (Weather Research and Forecasting plus chemistry), which incorporates modules to treat boundary layer mixing, emission, aging, dry deposition, and advection of black carbon aerosol. We also develop land surface and surface layer adjoints to account for coupling between radiation and vertical mixing. Model performance is verified against finite difference derivative approximations. A second-order checkpointing scheme is created to reduce computational costs and enable simulations longer than 6 h. The adjoint is coupled to WRFDA-Chem, in order to conduct a sensitivity study of anthropogenic and biomass burning sources throughout California during the 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) field campaign. A cost-function weighting scheme was devised to reduce the impact of statistically insignificant residual errors in future inverse modeling studies. Results of the sensitivity study show that, for this domain and time period, anthropogenic emissions are overpredicted, while wildfire emission error signs vary spatially. We consider the diurnal variation in emission sensitivities to determine at what time sources should be scaled up or down. Also, adjoint sensitivities for two choices of land surface model (LSM) indicate that emission inversion results would be sensitive to forward model configuration. The tools described here are the first step in conducting four-dimensional variational data assimilation in a coupled meteorology–chemistry model, which will potentially provide new constraints on aerosol precursor emissions and their distributions. Such analyses will be invaluable to assessments of particulate matter health and climate impacts.

The Role of Different Sources of Uncertainty in Data Assimilation with Coupled Land Surface - Subsurface Models

2021 ◽  
Author(s):  
Eduardo Emilio Sanchez-Leon ◽  
Natascha Brandhorst ◽  
Bastian Waldowski ◽  
Ching Pui Hung ◽  
Insa Neuweiler ◽  
...  
Keyword(s):  
Plant Physiology ◽  
Data Assimilation ◽  
Land Surface ◽  
Reference Model ◽  
Land Surface Model ◽  
Open Loop ◽  
Surface Model ◽  
Model Parameters ◽  
Area Index ◽  
Sources Of Uncertainty

<p>The success of data assimilation systems strongly depends on the suitability of the generated ensembles. While in theory data assimilation should correct the states of an ensemble of models, especially if model parameters are included in the update, its effectiveness will depend on many factors, such as ensemble size, ensemble spread, and the proximity of the prior ensemble simulations to the data. In a previous study, we generated an ensemble-based data-assimilation framework to update model states and parameters of a coupled land surface-subsurface model. As simulation system we used the Terrestrial Systems Modeling Platform TerrSysMP, with the community land-surface model (CLM) coupled to the subsurface model Parflow. In this work, we used the previously generated ensemble to assess the effect of uncertain input forcings (i.e. precipitation), unknown subsurface parameterization, and/or plant physiology in data assimilation. The model domain covers a rectangular area of 1×5km<sup>2</sup>, with a uniform depth of 50m. The subsurface material is divided into four units, and the top soil layers consist of three different soil types with different vegetation. Streams are defined along three of the four boundaries of the domain. For data assimilation, we used the TerrsysMP PDAF framework. We defined a series of data assimilation experiments in which sources of uncertainty were considered individually, and all additional settings of the ensemble members matched those of the reference. To evaluate the effect of all sources of uncertainty combined, we designed an additional test in which the input forcings, subsurface parameters, and the leaf area index of the ensemble were all perturbed. In all these tests, the reference model had homogenous subsurface units and the same grid resolution as all models of the ensemble. We used point measurements of soil moisture in all data assimilation experiments. We concluded that precipitation dominates the dynamics of the simulations, and perturbing the precipitation fields for the ensemble have a major impact in the performance of the assimilation. Still, considerable improvements are observed compared to open-loop simulations. In contrast, the effect of variable plant physiology was minimal, with no visible improvement in relevant fluxes such as evapotranspiration. As expected, improved ensemble predictions are propagated longer in time when parameters are included in the update.</p>

Sign in / Sign up

Export Citation Format

Share Document