L'apport de la télédétection spatiale à la modélisation des surfaces continentales

2020 ◽  
pp. 052
Author(s):  
Jean-Christophe Calvet ◽  
Jean-Louis Champeaux
Keyword(s):  
Satellite Data ◽  
Land Surface ◽  
Land Surface Model ◽  
Static Model ◽  
Geographic Information ◽  
Surface Model ◽  
Model Parameters

Cet article présente les différentes étapes des développements réalisés au CNRM des années 1990 à nos jours pour spatialiser à diverses échelles les simulations du modèle Isba des surfaces terrestres. Une attention particulière est portée sur l'intégration, dans le modèle, de données satellitaires permettant de caractériser la végétation. Deux façons complémentaires d'introduire de l'information géographique dans Isba sont présentées : cartographie de paramètres statiques et intégration au fil de l'eau dans le modèle de variables observables depuis l'espace. This paper presents successive steps in developments made at CNRM from the 1990s to the present-day in order to spatialize the simulations of the Isba land surface model at various scales. The focus is on the integration in the model of satellite data informative about vegetation. Two complementary ways to integrate geographic information in Isba are presented: mapping of static model parameters and sequential assimilation of variables observable from space.

The Role of Different Sources of Uncertainty in Data Assimilation with Coupled Land Surface - Subsurface Models

2021 ◽  
Author(s):  
Eduardo Emilio Sanchez-Leon ◽  
Natascha Brandhorst ◽  
Bastian Waldowski ◽  
Ching Pui Hung ◽  
Insa Neuweiler ◽  
...  
Keyword(s):  
Plant Physiology ◽  
Data Assimilation ◽  
Land Surface ◽  
Reference Model ◽  
Land Surface Model ◽  
Open Loop ◽  
Surface Model ◽  
Model Parameters ◽  
Area Index ◽  
Sources Of Uncertainty

<p>The success of data assimilation systems strongly depends on the suitability of the generated ensembles. While in theory data assimilation should correct the states of an ensemble of models, especially if model parameters are included in the update, its effectiveness will depend on many factors, such as ensemble size, ensemble spread, and the proximity of the prior ensemble simulations to the data. In a previous study, we generated an ensemble-based data-assimilation framework to update model states and parameters of a coupled land surface-subsurface model. As simulation system we used the Terrestrial Systems Modeling Platform TerrSysMP, with the community land-surface model (CLM) coupled to the subsurface model Parflow. In this work, we used the previously generated ensemble to assess the effect of uncertain input forcings (i.e. precipitation), unknown subsurface parameterization, and/or plant physiology in data assimilation. The model domain covers a rectangular area of 1×5km<sup>2</sup>, with a uniform depth of 50m. The subsurface material is divided into four units, and the top soil layers consist of three different soil types with different vegetation. Streams are defined along three of the four boundaries of the domain. For data assimilation, we used the TerrsysMP PDAF framework. We defined a series of data assimilation experiments in which sources of uncertainty were considered individually, and all additional settings of the ensemble members matched those of the reference. To evaluate the effect of all sources of uncertainty combined, we designed an additional test in which the input forcings, subsurface parameters, and the leaf area index of the ensemble were all perturbed. In all these tests, the reference model had homogenous subsurface units and the same grid resolution as all models of the ensemble. We used point measurements of soil moisture in all data assimilation experiments. We concluded that precipitation dominates the dynamics of the simulations, and perturbing the precipitation fields for the ensemble have a major impact in the performance of the assimilation. Still, considerable improvements are observed compared to open-loop simulations. In contrast, the effect of variable plant physiology was minimal, with no visible improvement in relevant fluxes such as evapotranspiration. As expected, improved ensemble predictions are propagated longer in time when parameters are included in the update.</p>

Improving soil moisture estimation through a dual-cycle assimilation strategy

2020 ◽  
Author(s):  
Jiaxin Tian ◽  
Jun Qin ◽  
Kun Yang
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Surface Model ◽  
Model Parameters ◽  
Significant Implication ◽  
Large Spatial Scale ◽  
Dual Cycle ◽  
Moisture Estimation

<p>Soil moisture plays a key role in land surface processes. Both remote sensing and model simulation have their respective limitations in the estimation of soil moisture on a large spatial scale. Data assimilation is a promising way to merge remote sensing observation and land surface model (LSM), thus having a potential to acquire more accurate soil moisture. Two mainstream assimilation algorithms (variational-based and sequential-based) both need model and observation uncertainties due to their great impact on assimilation results. Besides, as far as land surface models are concerned, model parameters have a significant implication for simulation. However, how to specify these two uncertainties and parameters has been confusing for a long time. A dual-cycle assimilation algorithm, which consists of two cycles, is proposed for addressing the above issue. In the outer cycle, a cost function is constructed and minimized to estimate model parameters and uncertainties in both model and observation. In the inner cycle, a sequentially based filtering method is implemented to estimate soil moisture with the parameters and uncertainties estimated in the outer cycle. For the illustration of the effectiveness of the proposed algorithm, the Advanced Microwave Scanning Radiometer of earth Observing System (AMSR-E) brightness temperatures are assimilated into land surface model with a radiative transfer model as the observation operator in three experimental fields, including Naqu and Ngari on the Tibetan Plateau, and Coordinate Enhanced Observing (CEOP) reference site on Mongolia. The results indicate that the assimilation algorithm can significantly improve soil moisture estimation.</p>

scholarly journals Modelling river runoff and estimating its weather-related uncertainty for 11 large-scale rivers located in different regions of the globe

2017 ◽  
Vol 49 (4) ◽  
pp. 1072-1087 ◽  
Author(s):  
Yeugeniy M. Gusev ◽  
Olga N. Nasonova ◽  
Evgeny E. Kovalev ◽  
Georgii V. Aizel
Keyword(s):  
River Runoff ◽  
Land Surface ◽  
Input Data ◽  
Large Scale ◽  
Land Surface Model ◽  
Grid Cell ◽  
Surface Model ◽  
Model Parameters ◽  
Data Sets ◽  
Natural Conditions

Abstract In order to study the possibility of reproducing river runoff with making use of the land surface model Soil Water–Atmosphere–Plants (SWAP) and information based on global data sets 11 river basins suggested within the framework of the Inter-Sectoral Impact Model Intercomparison Project and located in various regions of the globe under a wide variety of natural conditions were used. Schematization of each basin as a set of 0.5° × 0.5° computational grid cells connected by a river network was carried out. Input data including atmospheric forcing data and land surface parameters based, respectively, on the global WATCH and ECOCLIMAP data sets were prepared for each grid cell. Simulations of river runoff performed by SWAP with a priori input data showed poor agreement with observations. Optimization of a number of model parameters substantially improved the results. The obtained results confirm the universal character of SWAP. Natural uncertainty of river runoff caused by weather noise was estimated and analysed. It can be treated as the lowest limit of predictability of river runoff. It was shown that differences in runoff uncertainties obtained for different rivers depend greatly on natural conditions of a river basin, in particular, on the ratio of deterministic and random components of the river runoff.

scholarly journals Multi-site evaluation of the JULES land surface model using global and local data

2015 ◽  
Vol 8 (2) ◽  
pp. 295-316 ◽  
Author(s):  
D. Slevin ◽  
S. F. B. Tett ◽  
M. Williams
Keyword(s):  
Land Surface ◽  
Meteorological Data ◽  
Land Surface Model ◽  
Surface Model ◽  
Model Parameters ◽  
Data Sets ◽  
Local Data ◽  
Area Index ◽  
Phenology Model ◽  
Global Data

Abstract. This study evaluates the ability of the JULES land surface model (LSM) to simulate photosynthesis using local and global data sets at 12 FLUXNET sites. Model parameters include site-specific (local) values for each flux tower site and the default parameters used in the Hadley Centre Global Environmental Model (HadGEM) climate model. Firstly, gross primary productivity (GPP) estimates from driving JULES with data derived from local site measurements were compared to observations from the FLUXNET network. When using local data, the model is biased with total annual GPP underestimated by 16% across all sites compared to observations. Secondly, GPP estimates from driving JULES with data derived from global parameter and atmospheric reanalysis (on scales of 100 km or so) were compared to FLUXNET observations. It was found that model performance decreases further, with total annual GPP underestimated by 30% across all sites compared to observations. When JULES was driven using local parameters and global meteorological data, it was shown that global data could be used in place of FLUXNET data with a 7% reduction in total annual simulated GPP. Thirdly, the global meteorological data sets, WFDEI and PRINCETON, were compared to local data to find that the WFDEI data set more closely matches the local meteorological measurements (FLUXNET). Finally, the JULES phenology model was tested by comparing results from simulations using the default phenology model to those forced with the remote sensing product MODIS leaf area index (LAI). Forcing the model with daily satellite LAI results in only small improvements in predicted GPP at a small number of sites, compared to using the default phenology model.

scholarly journals Simulating damage for wind storms in the land surface model ORCHIDEE-CAN (revision 4262)

2017 ◽  
Author(s):  
Yi-Ying Chen ◽  
Barry Gardiner ◽  
Ferenc Pasztor ◽  
Kristina Blennow ◽  
James Ryder ◽  
...  
Keyword(s):  
Land Surface ◽  
Canopy Structure ◽  
Land Surface Model ◽  
Model Error ◽  
Small Scale ◽  
Surface Model ◽  
Model Parameters ◽  
Storm Damage ◽  
Wind Speeds ◽  
Observed Damage

Abstract. Earth System Models (ESMs) are currently the most advanced tools with which to study the interactions between humans, ecosystem productivity and the climate. The inclusion of storm damage in ESMs has long been hampered by their big-leaf approach which ignores the canopy structure information that is required for process-based wind throw modelling. Recently the big-leaf assumptions in the large scale land surface model ORCHIDEE-CAN were replaced by a three dimensional description of the canopy structure. This opened the way to the integration of the processes from the small-scale wind damage risk model ForestGALES into ORCHIDEE-CAN. The resulting enhanced model was completed by an empirical function to convert the difference between actual and critical wind speeds into forest damage. This new version of ORCHIDEE-CAN was parametrized over Sweden. Subsequently, the performance of the model was tested against data for historical storms in Southern Sweden between 1951 and 2010, and South-western France in 2009. In years without big storms, here defined as a storm damaging less than 15 × 106 m3 of wood in Sweden, the model error is 1.62 × 106 m3 which is about 100 % of the observed damage. For years with big storms, such as Gudrun in 2005, the model error increased to 5.05 × 106 m3 which is between 10 % and 50 % of the observed damage. When the same model parameters were used over France, the model reproduced a decrease in leaf area index and an increase in albedo, in accordance with SPOT-VGT and MODIS records following the passing of Cyclone Klaus in 2009. The current version of ORCHIDEE-CAN (revision 4262) is therefore expected to have the capability to capture the dynamics of forest structure due to storm disturbance both at regional and global scales, although the empirical parameters calculating gustiness from the gridded wind fields and storm damage from critical wind speeds may benefit from regional fitting.

scholarly journals Development and evaluation of 0.05° terrestrial water storage estimates using CABLE land surface model and GRACE data assimilation

2021 ◽  
Author(s):  
Natthachet Tangdamrongsub ◽  
Michael F. Jasinski ◽  
Peter Shellito
Keyword(s):  
Soil Moisture ◽  
Spatial Resolution ◽  
Land Surface ◽  
Water Storage ◽  
Land Surface Model ◽  
Surface Model ◽  
Model Parameters ◽  
Terrestrial Water Storage ◽  
Grace Data ◽  
Terrestrial Water

Abstract. Accurate estimation of terrestrial water storage (TWS) at a meaningful spatiotemporal resolution is important for reliable assessments of regional water resources and climate variability. Individual components of TWS include soil moisture, snow, groundwater, and canopy storage and can be estimated from the Community Atmosphere Biosphere Land Exchange (CABLE) land surface model. The spatial resolution of CABLE is currently limited to 0.5° by the resolution of soil and vegetation datasets that underlie model parameterizations, posing a challenge to using CABLE for hydrological applications at a local scale. This study aims to improve the spatial detail (from 0.5° to 0.05°) and timespan (1981–2012) of CABLE TWS estimates using rederived model parameters and high-resolution meteorological forcing. In addition, TWS observations derived from the Gravity Recovery and Climate Experiment (GRACE) satellite mission are assimilated into CABLE to improve TWS accuracy. The success of the approach is demonstrated in Australia, where multiple ground observation networks are available for validation. The evaluation process is conducted using four different case studies that employ different model spatial resolutions and include or omit GRACE data assimilation (DA). We find that the CABLE 0.05° developed here improves TWS estimates in terms of accuracy, spatial resolution, and long-term water resource assessment reliability. The inclusion of GRACE DA increases the accuracy of groundwater storage (GWS) estimates and has little impact on surface soil moisture or evapotranspiration. The use of improved model parameters and improved state estimations (via GRACE DA) together is recommended to achieve the best GWS accuracy. The workflow elaborated in this paper relies only on publicly accessible global datasets, allowing reproduction of the 0.05° TWS estimates in any study region.

scholarly journals Assessing methane emissions for northern peatlands in ORCHIDEE-PEAT revision 7020

2021 ◽  
Author(s):  
Elodie Salmon ◽  
Fabrice Jégou ◽  
Bertrand Guenet ◽  
Line Jourdain ◽  
Chunjing Qiu ◽  
...  
Keyword(s):  
Methane Production ◽  
Land Surface ◽  
Soil Depth ◽  
Land Surface Model ◽  
Methane Emissions ◽  
Surface Model ◽  
Model Parameters ◽  
Methane Budget ◽  
Northern Peatlands ◽  
Over The Top

Abstract. In the global methane budget, the largest natural source is attributed to wetlands that encompass all ecosystems composed of waterlogged or inundated ground, capable of methane production. Among them, northern peatlands that store large amounts of soil organic carbon have been functioning, since the end of the last glaciation period, as long-term sources of methane (CH4) and are one of the most significant methane sources among wetlands. To reduce global methane budget uncertainties, it is of significance to understand processes driving methane production and fluxes in northern peatlands. A methane model that features methane production and transport by plants, ebullition process and diffusion in soil, oxidation to CO2 and CH4 fluxes to the atmosphere has been embedded in the ORCHIDEE-PEAT land surface model which includes an explicit representation of northern peatlands. This model, ORCHIDEE-PCH4 was calibrated and evaluated on 14 peatland sites distributed on both Eurasian and American continents in the northern boreal and temperate regions. Data assimilation approaches were employed to optimized parameters at each site and at all sites simultaneously. Results show that, in ORCHIDEE-PCH4, methanogenesis is sensitive to temperature and substrate availability over the top 75 cm of soil depth. Methane emissions estimated using single site optimization (SSO) of model parameters are underestimated by 9 g CH4 m−2 year−1 on average (i.e. 50 % higher than the site average of yearly methane emissions). While using the multi-sites optimization (MSO), methane emissions are overestimated by 5 g CH4 m−2 year−1 on average across all investigated sites (i.e. 37 % lower than the site average of yearly methane emissions).

scholarly journals Identification of key parameters controlling demographicallystructured vegetation dynamics in a Land Surface Model [CLM4.5(ED)]

2019 ◽  
Author(s):  
Elias C. Massoud ◽  
Chonggang Xu ◽  
Rosie Fisher ◽  
Ryan Knox ◽  
Anthony Walker ◽  
...  
Keyword(s):  
Land Surface ◽  
Canopy Structure ◽  
Land Surface Model ◽  
Carbon Stocks ◽  
Surface Model ◽  
Model Parameters ◽  
Growth Strategies ◽  
Community Land Model ◽  
Vegetation Models ◽  
The Impact

Abstract. Vegetation plays a key role in regulating global carbon cycles and is a key component of the Earth System Models (ESMs) aimed to project Earth's future climates. In the last decade, the vegetation component within ESMs has witnessed great progresses from simple 'big-leaf' approaches to demographically-structured approaches, which has a better representation of plant size, canopy structure, and disturbances. The demographically-structured vegetation models are typically controlled by a large number of parameters, and sensitivity analysis is generally needed to quantify the impact of each parameter on the model outputs for a better understanding of model behaviors. In this study, we use the Fourier Amplitude Sensitivity Test (FAST) to diagnose the Community Land Model coupled to the Ecosystem Demography Model, or CLM4.5(ED). We investigate the first and second order sensitivities of the model parameters to outputs that represent simulated growth and mortality as well as carbon fluxes and stocks. While the photosynthetic capacity parameter Vc,max25 is found to be important for simulated carbon stocks and fluxes, we also show the importance of carbon storage and allometry parameters, which are shown here to determine vegetation demography and carbon stocks through their impacts on survival and growth strategies. The results of this study highlights the importance of understanding the dynamics of the next generation of demographically-enabled vegetation models within ESMs toward improved model parameterization and model structure for better model fidelity.

Sign in / Sign up

Export Citation Format

Share Document