scholarly journals Estimating water discharge from large radar altimetry datasets

2013 ◽  
Vol 17 (3) ◽  
pp. 923-933 ◽  
Author(s):  
A. C. V. Getirana ◽  
C. Peters-Lidard
Keyword(s):  
Land Surface ◽  
Amazon Basin ◽  
Water Discharge ◽  
Land Surface Model ◽  
Global Scale ◽  
Surface Model ◽  
Rating Curve ◽  
Radar Altimetry ◽  
Discharge Data ◽  
The Impact

Abstract. The objective of this study is to evaluate the potential of large altimetry datasets as a complementary gauging network capable of providing water discharge in ungauged regions. A rating curve-based methodology is adopted to derive water discharge from altimetric data provided by the Envisat satellite at 475 virtual stations (VS) within the Amazon basin. From a global-scale perspective, the stage–discharge relations at VS are built based on radar altimetry and outputs from a modeling system composed of a land surface model and a global river routing scheme. In order to quantify the impact of model uncertainties on rating-curve based discharges, a second experiment is performed using outputs from a simulation where daily observed discharges at 135 gauging stations are introduced in the modeling system. Discharge estimates at 90 VS are evaluated against observations during the curve fitting calibration (2002–2005) and evaluation (2006–2008) periods, resulting in mean normalized RMS errors as high as 39 and 15% for experiments without and with direct insertion of data, respectively. Without direct insertion, uncertainty of discharge estimates can be mostly attributed to forcing errors at smaller scales, generating a positive correlation between performance and drainage area. Mean relative streamflow volume errors (RE) of altimetry-based discharges varied from 15 to 84% for large and small drainage areas, respectively. Rating curves produced a mean RE of 51% versus 68% from model outputs. Inserting discharge data into the modeling system decreases the mean RE from 51 to 18%, and mean NRMSE from 24 to 9%. These results demonstrate the feasibility of applying the proposed methodology to the continental or global scales.

scholarly journals Water discharge estimates from large radar altimetry datasets in the Amazon basin

2012 ◽  
Vol 9 (6) ◽  
pp. 7591-7611 ◽  
Author(s):  
A. C. V. Getirana ◽  
C. Peters-Lidard
Keyword(s):  
Data Assimilation ◽  
Amazon Basin ◽  
Water Discharge ◽  
Rating Curve ◽  
Radar Altimetry ◽  
Discharge Data ◽  
Modeling Uncertainties ◽  
The Mean ◽  
Relative Errors ◽  
The Impact

Abstract. In this study, we evaluate the use of a large radar altimetry dataset as a complementary gauging network capable of providing water discharge in ungauged regions within the Amazon basin. A rating-curve-based methodology is adopted to derive water discharge from altimetric data provided by Envisat at 444 virtual stations (VS). The stage-discharge relations at VS are built based on radar altimetry and outputs from a global flow routing scheme. In order to quantify the impact of modeling uncertainties on rating-curve based discharges, another experiment is performed using simulated discharges derived from a simplified data assimilation procedure. Discharge estimates at 90 VS are evaluated against observations during the curve fitting calibration (2002–2005) and evaluation (2006–2008) periods, resulting in mean relative RMS errors as high as 52% and 12% for experiments without and with assimilation, respectively. Without data assimilation, uncertainty of discharge estimates can be mostly attributed to forcing errors at smaller scales, generating a positive correlation between performance and drainage area. Mean relative errors (RE) of altimetry-based discharges varied from 15% to 92% for large and small drainage areas, respectively. Rating curves produced a mean RE of 54% versus 68% from model outputs. Assimilating discharge data decreases the mean RE from 68% to 12%. These results demonstrate the feasibility of applying the proposed methodology to the regional or global scales. Also, it is shown the potential of satellite altimetry for predicting water discharge in poorly-gauged and ungauged river basins.

scholarly journals Weak sensitivity of the terrestrial water budget to global soil texture maps in the ORCHIDEE land surface model

2019 ◽  
Author(s):  
Salma Tafasca ◽  
Agnès Ducharne ◽  
Christian Valentin
Keyword(s):  
Soil Water ◽  
Soil Texture ◽  
Land Surface ◽  
Large Scale ◽  
Land Surface Model ◽  
Global Scale ◽  
Added Value ◽  
Surface Model ◽  
Total Runoff ◽  
The Impact

Abstract. Soil physical properties play an important role for estimating soil water and energy fluxes. Many hydrological and land surface models (LSMs) use soil texture maps to infer these properties. Here, we investigate the impact of soil texture on soil water fluxes and storage at global scale using the ORCHIDEE LSM, forced by several complex or globally-uniform soil texture maps. The model shows a realistic sensitivity of runoff processes and soil moisture to soil texture, and reveals that medium textures give the highest evapotranspiration and lowest total runoff rates. The three tested complex soil texture maps being rather similar by construction, especially when upscaled at the 0.5° resolution used here, they result in similar water budgets at all scales, compared to the uncertainties of observation-based products and meteorological forcing datasets. A useful outcome is that the choice of the input soil texture map is not crucial for large-scale modelling. The added-value of more detailed soil information (horizontal and vertical resolution, soil composition) deserves further studies.

scholarly journals Development and application of the WRFPLUS-Chem online chemistry adjoint and WRFDA-Chem assimilation system

2015 ◽  
Vol 8 (6) ◽  
pp. 1857-1876 ◽  
Author(s):  
J. J. Guerrette ◽  
D. K. Henze
Keyword(s):  
Land Surface ◽  
Vertical Mixing ◽  
Model Performance ◽  
Land Surface Model ◽  
Sensitivity Study ◽  
Climate Impacts ◽  
Surface Model ◽  
Time Period ◽  
Develop Land ◽  
The Impact

Abstract. Here we present the online meteorology and chemistry adjoint and tangent linear model, WRFPLUS-Chem (Weather Research and Forecasting plus chemistry), which incorporates modules to treat boundary layer mixing, emission, aging, dry deposition, and advection of black carbon aerosol. We also develop land surface and surface layer adjoints to account for coupling between radiation and vertical mixing. Model performance is verified against finite difference derivative approximations. A second-order checkpointing scheme is created to reduce computational costs and enable simulations longer than 6 h. The adjoint is coupled to WRFDA-Chem, in order to conduct a sensitivity study of anthropogenic and biomass burning sources throughout California during the 2008 Arctic Research of the Composition of the Troposphere from Aircraft and Satellites (ARCTAS) field campaign. A cost-function weighting scheme was devised to reduce the impact of statistically insignificant residual errors in future inverse modeling studies. Results of the sensitivity study show that, for this domain and time period, anthropogenic emissions are overpredicted, while wildfire emission error signs vary spatially. We consider the diurnal variation in emission sensitivities to determine at what time sources should be scaled up or down. Also, adjoint sensitivities for two choices of land surface model (LSM) indicate that emission inversion results would be sensitive to forward model configuration. The tools described here are the first step in conducting four-dimensional variational data assimilation in a coupled meteorology–chemistry model, which will potentially provide new constraints on aerosol precursor emissions and their distributions. Such analyses will be invaluable to assessments of particulate matter health and climate impacts.

scholarly journals SMOS Neural Network Soil Moisture Data Assimilation in a Land Surface Model and Atmospheric Impact

2019 ◽  
Author(s):  
Nemesio Rodriguez-Fernandez ◽  
Patricia de Rosnay ◽  
Clement Albergel ◽  
Philippe Richaume ◽  
Filipe Aires ◽  
...  
Keyword(s):  
Neural Network ◽  
Soil Moisture ◽  
Data Assimilation ◽  
Land Surface ◽  
Positive Impact ◽  
Land Surface Model ◽  
Surface Model ◽  
Northern Asia ◽  
The Impact

The assimilation of Soil Moisture and Ocean Salinity (SMOS) data into the ECMWF (European Centre for Medium Range Weather Forecasts) H-TESSEL (Hydrology revised - Tiled ECMWF Scheme for Surface Exchanges over Land) model is presented. SMOS soil moisture (SM) estimates have been produced specifically by training a neural network with SMOS brightness temperatures as input and H-TESSEL model SM simulations as reference. This can help the assimilation of SMOS information in several ways: (1) the neural network soil moisture (NNSM) data have a similar climatology to the model, (2) no global bias is present with respect to the model even if regional differences can exist. Experiments performing joint data assimilation (DA) of NNSM, 2 metre air temperature and relative humidity or NNSM-only DA are discussed. The resulting SM was evaluated against a large number of in situ measurements of SM obtaining similar results to those of the model with no assimilation, even if significant differences were found from site to site. In addition, atmospheric forecasts initialized with H-TESSEL runs (without DA) or with the analysed SM were compared to measure of the impact of the satellite information. Although, NNSM DA has an overall neutral impact in the forecast in the Tropics, a significant positive impact was found in other areas and periods, especially in regions with limited in situ information. The joint NNSM, T2m and RH2m DA improves the forecast for all the seasons in the Southern Hemisphere. The impact is mostly due to T2m and RH2m, but SMOS NN DA alone also improves the forecast in July- September. In the Northern Hemisphere, the joint NNSM, T2m and RH2m DA improves the forecast in April-September, while NNSM alone has a significant positive effect in July-September. Furthermore, forecasting skill maps show that SMOS NNSM improves the forecast in North America and in Northern Asia for up to 72 hours lead time.

scholarly journals Ability of the land surface model ISBA-A-gs to simulate leaf area index at the global scale: Comparison with satellites products

2006 ◽  
Vol 111 (D18) ◽  
Author(s):  
Anne-Laure Gibelin ◽  
Jean-Christophe Calvet ◽  
Jean-Louis Roujean ◽  
Lionel Jarlan ◽  
Sietse O. Los
Keyword(s):  
Leaf Area Index ◽  
Leaf Area ◽  
Land Surface ◽  
Land Surface Model ◽  
Global Scale ◽  
Surface Model ◽  
Area Index

Comparing Assimilation of Soil Moisture and C-band Backscatter in High Resolution Land Surface Model

2020 ◽  
Author(s):  
Leqiang Sun ◽  
Stéphane Belair ◽  
Marco Carrera ◽  
Bernard Bilodeau
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Open Loop ◽  
In Situ Measurements ◽  
Lookup Table ◽  
Surface Model ◽  
Loop Model ◽  
The Impact

<p>Canadian Space Agency (CSA) has recently started receiving and processing the images from the recently launched C-band RADARSAT Constellation Mission (RCM). The backscatter and soil moisture retrievals products from the previously launched RADARSAT-2 agree well with both in-situ measurements and surface soil moisture modeled with land surface model Soil, Vegetation, and Snow (SVS). RCM will provide those products at an even better spatial coverage and temporal resolution. In preparation of the potential operational application of RCM products in Canadian Meteorological Center (CMC), this paper presents the scenarios of assimilating either soil moisture retrieval or outright backscatter signal in a 100-meter resolution version of the Canadian Land Data Assimilation System (CaLDAS) on field scale with time interval of three hours. The soil moisture retrieval map was synthesized by extrapolating the regression relationship between in-situ measurements and open loop model output based on soil texture lookup table. Based on this, the backscatter map was then generated with the surface roughness retrieved from RADARSAT-2 images using a modified Integral Equation Model (IEM) model. Bias correction was applied to the Ensemble Kalman filter (EnKF) to mitigate the impact of nonlinear errors introduced by multi-sourced perturbations. Initial results show that the assimilation of backscatter is as effective as assimilating soil moisture retrievals. Compared to open loop, both can improve the analysis of surface moisture, particularly in terms of reducing bias.  </p>

Contribution of lakes in the ORCHIDEE land surface model

2020 ◽  
Author(s):  
Anthony Bernus ◽  
Catherine Ottle ◽  
Nina Raoult
Keyword(s):  
Surface Temperature ◽  
Land Surface Temperature ◽  
Energy Budget ◽  
Land Surface ◽  
Land Surface Model ◽  
Global Scale ◽  
Heat Fluxes ◽  
Energy Budgets ◽  
Surface Model ◽  
Local Climate

<p>Lakes play a major role on local climate and boundary layer stratification. At global scale, they have been shown to have an impact on the energy budget, (see for example Le Moigne et al., 2016 or Bonan, 1995 ) . To represent the energy budget of lakes at a global scale, the FLake (Mironov et al, 2008) lake model has been coupled to the ORCHIDEE land surface model - the continental part of the IPSL earth system model. By including Flake in ORCHIDEE, we aim to improve the representation of land surface temperature and heat fluxes. Using the standard CMIP6 configuration of ORCHIDEE,  two 40-year simulations were generated (one coupled with FLake and one without) using the CRUJRA meteorological forcing data at a spatial resolution of 0.5°. We compare land surface temperatures and heat fluxes from the two ORCHIDEE simulations and assess the impacts of lakes on surface energy budgets. MODIS satellite land surface temperature products will be used to validate the simulations. We expect a better fit between the simulated land surface temperature and the MODIS data when the FLake configuration is used. The preliminary results of the comparison will be presented.</p>

Evaluation of Assumptions in Soil Moisture Triple Collocation Analysis

2014 ◽  
Vol 15 (3) ◽  
pp. 1293-1302 ◽  
Author(s):  
M. Tugrul Yilmaz ◽  
Wade T. Crow
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Land Surface ◽  
Land Surface Model ◽  
Microwave Remote Sensing ◽  
Surface Model ◽  
Correlated Errors ◽  
Cross Covariance ◽  
Mutual Independence ◽  
The Impact

Abstract Triple collocation analysis (TCA) enables estimation of error variances for three or more products that retrieve or estimate the same geophysical variable using mutually independent methods. Several statistical assumptions regarding the statistical nature of errors (e.g., mutual independence and orthogonality with respect to the truth) are required for TCA estimates to be unbiased. Even though soil moisture studies commonly acknowledge that these assumptions are required for an unbiased TCA, no study has specifically investigated the degree to which errors in existing soil moisture datasets conform to these assumptions. Here these assumptions are evaluated both analytically and numerically over four extensively instrumented watershed sites using soil moisture products derived from active microwave remote sensing, passive microwave remote sensing, and a land surface model. Results demonstrate that nonorthogonal and error cross-covariance terms represent a significant fraction of the total variance of these products. However, the overall impact of error cross correlation on TCA is found to be significantly larger than the impact of nonorthogonal errors. Because of the impact of cross-correlated errors, TCA error estimates generally underestimate the true random error of soil moisture products.

scholarly journals The CSIRO Mk3L climate system model v1.0 coupled to the CABLE land surface scheme v1.4b: evaluation of the control climatology

2011 ◽  
Vol 4 (4) ◽  
pp. 1115-1131 ◽  
Author(s):  
J. Mao ◽  
S. J. Phipps ◽  
A. J. Pitman ◽  
Y. P. Wang ◽  
G. Abramowitz ◽  
...  
Keyword(s):  
Land Surface ◽  
Land Surface Model ◽  
Climate System ◽  
System Model ◽  
Surface Model ◽  
Climate System Model ◽  
Near Surface ◽  
Land Surface Scheme ◽  
Surface Scheme ◽  
The Impact

Abstract. The CSIRO Mk3L climate system model, a reduced-resolution coupled general circulation model, has previously been described in this journal. The model is configured for millennium scale or multiple century scale simulations. This paper reports the impact of replacing the relatively simple land surface scheme that is the default parameterisation in Mk3L with a sophisticated land surface model that simulates the terrestrial energy, water and carbon balance in a physically and biologically consistent way. An evaluation of the new model's near-surface climatology highlights strengths and weaknesses, but overall the atmospheric variables, including the near-surface air temperature and precipitation, are simulated well. The impact of the more sophisticated land surface model on existing variables is relatively small, but generally positive. More significantly, the new land surface scheme allows an examination of surface carbon-related quantities including net primary productivity which adds significantly to the capacity of Mk3L. Overall, results demonstrate that this reduced-resolution climate model is a good foundation for exploring long time scale phenomena. The addition of the more sophisticated land surface model enables an exploration of important Earth System questions including land cover change and abrupt changes in terrestrial carbon storage.

Sign in / Sign up

Export Citation Format

Share Document