scholarly journals Investigating the influence of topographic irregularities and two-dimensional effects on surface ground motion intensity with one- and two-dimensional analyses

2014 ◽  
Vol 14 (7) ◽  
pp. 1773-1788 ◽  
Author(s):  
G. Ç. İnce ◽  
L. Yılmazoğlu
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Soil Conditions ◽  
Response Analysis ◽  
Two Dimensional ◽  
Ground Acceleration ◽  
Equivalent Linear ◽  
Local Soil ◽  
Different Depths ◽  
Earthquake Response Analysis

Abstract. In this work, the surface ground motion that occurs during an earthquake in ground sections having different topographic forms has been examined with one and two dynamic site response analyses. One-dimensional analyses were undertaken using the Equivalent-Linear Earthquake Response Analysis (EERA) program based on the equivalent linear analysis principle and the Deepsoil program which is able to make both equivalent linear and nonlinear analyses and two-dimensional analyses using the Plaxis 8.2 software. The viscous damping parameters used in the dynamic site response analyses undertaken with the Plaxis 8.2 software were obtained using the DeepSoil program. In the dynamic site response analyses, the synthetic acceleration over a 475-year return period representing the earthquakes in Istanbul was used as the basis of the bedrock ground motion. The peak ground acceleration obtained different depths of soils and acceleration spectrum values have been compared. The surface topography and layer boundaries in the 5-5' cross section which cuts across the study area west to east were selected in order to examine the effect of the land topography and layer boundaries on the analysis results, and were flattened and compared with the actual status. The analysis results showed that the characteristics of the surface ground motion change in relation to the varying local soil conditions and land topography.

scholarly journals Investigation of the influence of topographic irregularities and two dimensional effects on the intensity of surface ground motion with one- and two-dimensional analyses

2013 ◽  
Vol 1 (6) ◽  
pp. 7193-7238
Author(s):  
L. Yılmazoğlu ◽  
G. Ç. İnce
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Soil Conditions ◽  
Response Analysis ◽  
Two Dimensional ◽  
Ground Acceleration ◽  
Equivalent Linear ◽  
Local Soil ◽  
Different Depths ◽  
Earthquake Response Analysis

Abstract. In this work, the surface ground motion that occurs during an earthquake in ground sections having different topographic forms has been examined with one and two dynamic site response analyses. One-dimensional analyses were undertaken using the Equivalent-Linear Earthquake Response Analysis program based on the equivalent linear analysis principle and the Deepsoil program which is able to make both equivalent linear and nonlinear analyses and two-dimensional analyses using the Plaxis software. The viscous damping parameters used in the dynamic site response analyses undertaken with the Plaxis software were obtained using the DeepSoil program. In the dynamic site response analyses, the synthetic acceleration over a 475 yr replication period representing the earthquakes in Istanbul was used as the basis of the bedrock ground motion. The peak ground acceleration obtained different depths of soils and acceleration spectrum values have been compared. The surface topography and layer boundaries in the 5-5' section were selected in order to examine the effect of the land topography and layer boundaries on the analysis results were flattened and compared with the actual status. The analysis results showed that the characteristics of the surface ground motion changes in relation to the varying local soil conditions and land topography.

Simplified Criteria to Select Ground Response Analysis Methods for Seismic Building Design: Equivalent Linear versus Nonlinear Approaches

2021 ◽  
Author(s):  
Mauro Aimar ◽  
Sebastiano Foti
Keyword(s):  
Seismic Waves ◽  
Site Response ◽  
Building Design ◽  
Soil Conditions ◽  
Response Analysis ◽  
Depth Range ◽  
Ground Response Analysis ◽  
Equivalent Linear ◽  
Acceleration Time Histories ◽  
Soil Deposits

ABSTRACT The possible amplification of seismic waves in soil deposits is crucial for the seismic design of buildings and geotechnical systems. The most common approaches for the numerical simulation of seismic site response are the equivalent linear (EQL) and the nonlinear (NL). Even though their advantages and limitations have been investigated in several studies, the relative field of applicability is still under debate. This study tested both methods over a wide population of soil models, which were subjected to a set of acceleration time histories recorded from strong earthquakes. A thorough comparison of the results of the EQL and the NL approaches was carried out, to identify the conditions in which the relative differences are significant. This assessment allowed for the definition of simplified criteria to predict when the two schemes are or are not compatible for large expected shaking levels. The proposed criteria are based on simple and intuitive parameters describing the soil deposit and the ground-motion parameters, which can be predicted straightforwardly. Therefore, this study provides a scheme for the choice between the EQL and the NL approaches that can be used even at the preliminary design stages. It appears that the EQL approach provides reliable amplification estimates in soil deposits with thickness up to 30 m, except for very deformable soils, but this depth range may be extended at long vibration periods. This result reveals a good level of reliability of the EQL approach for various soil conditions encountered in common applications, even for high-intensity shaking.

A Study of Local Site Effects on Seismic Design of Buildings

2011 ◽  
Vol 374-377 ◽  
pp. 1742-1745
Author(s):  
Vilas G. Meshram ◽  
Ajay L. Dandge
Keyword(s):  
Site Effects ◽  
Seismic Analysis ◽  
Site Response ◽  
Soil Conditions ◽  
Response Analysis ◽  
Specific Response ◽  
Site Specific ◽  
Local Site Effects ◽  
Local Site ◽  
Local Soil

In present work, first the multi-storeyed building was analysing taking medium site condition in zone II. Sa/g and Base shear for that building was calculated from IS 1893:2002 (Part 1).After that site specific ground response analysis is carried out for Amravati and Nagpur region soil sites. For development of site specific response spectrum ProSHAKE software is used ProSHAKE is based on one dimensional geotechnical site response model. Site response study is usually carried out using the geotechnical data or Geophysical data (shear wave velocity). Basic aim of present work is to study local site effects on seismic analysis of multi-storeyed Buildings, for this purpose local soil conditions are considered. In the present work various local sites in Amravati and Nagpur region are studied.

scholarly journals Evaluation of Seismic Site Amplification Using 1D Site Response Analyses at Ba Dinh Square Area, Vietnam

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Ngoc-Long Tran ◽  
Muhammad Aaqib ◽  
Ba-Phu Nguyen ◽  
Duy-Duan Nguyen ◽  
Viet-Linh Tran ◽  
...  
Keyword(s):  
Site Response ◽  
Ground Motions ◽  
Site Amplification ◽  
Response Analysis ◽  
Ground Response ◽  
Ground Response Analysis ◽  
Ground Acceleration ◽  
Site Specific ◽  
Design Spectrum ◽  
Equivalent Linear

This study presents a case study on ground response analysis of one of the important cultural heritages in Hanoi, Vietnam. One-dimensional nonlinear and equivalent linear site response analyses which are commonly applied to solve the problem of seismic stress wave propagation are performed at the Ba Dinh square area. A measured in-situ shear wave velocity profile and corresponding geotechnical site investigation and laboratory test data are utilized to develop the site model for site-specific ground response analysis. A suite of earthquake records compatible with Vietnamese Design Code TCVN 9386: 2012 rock design spectrum is used as input ground motions at the bedrock. A few concerns associated with site-specific ground response evaluation are analyzed for both nonlinear and equivalent linear procedures, including shear strains, mobilized shear strength, and peak ground acceleration along with the depth. The results show that the mean maximum shear strains at any soil layer are less than 0.2% in the study area. A deamplification portion within the soil profile is observed at the layer interface with shear wave velocity reversal. The maximum peak ground acceleration (PGA) at the surface is about 0.2 g for equivalent linear analysis and 0.16 g for nonlinear analysis. The ground motions are amplified near the site natural period 0.72 s. The soil factors calculated in this study are 1.95 and 2.07 for nonlinear and equivalent linear analyses, respectively. These values are much different from the current value of 1.15 for site class C in TCVN 9386: 2012. A comparison of calculated response spectra and amplification factors with the local standard code of practice revealed significant discrepancies. It is demonstrated that the TCVN 9386: 2012 soil design spectrum is unable to capture the calculated site amplification in the study area.

Comparison of Equivalent Linear and Nonlinear Site Response Analysis Results and Model to Estimate Maximum Shear Strain

2016 ◽  
Vol 32 (3) ◽  
pp. 1867-1887 ◽  
Author(s):  
Brian Carlton ◽  
Kohji Tokimatsu
Keyword(s):  
Shear Strain ◽  
Site Response ◽  
Response Spectrum ◽  
Peak Ground Velocity ◽  
Site Response Analysis ◽  
Response Analysis ◽  
Ground Acceleration ◽  
Maximum Shear Strain ◽  
Nonlinear Site Response ◽  
Equivalent Linear

We compared the results of equivalent linear (ELA) and nonlinear site response analyses (NLA) and found that the differences between the values of the peak ground acceleration ( PGA), peak ground velocity ( PGV), Arias intensity ( I a), significant duration ( D5–75), and response spectrum for periods between 0.025 s and 2 s predicted by each method are non-negligible for maximum shear strain values predicted by ELA ( γ max, ELA) greater than 0.04% to 1.0%. As γ max, ELA increases, ELA in general predict smaller shear strain and D5–75 values, and larger PGA, PGV, I a, mean period, and response spectral values for periods less than 0.1 s and periods near the natural site period than NLA. To help researchers and practitioners decide when to use ELA and/or NLA, we developed a model to estimate γ max, ELA before conducting a site response analysis.

Two-Dimensional Nonlinear Earthquake Response Analysis of a Bridge-Foundation-Ground System

2008 ◽  
Vol 24 (2) ◽  
pp. 343-386 ◽  
Author(s):  
Yuyi Zhang ◽  
Joel P. Conte ◽  
Zhaohui Yang ◽  
Ahmed Elgamal ◽  
Jacobo Bielak ◽  
...  
Keyword(s):  
Lateral Spreading ◽  
Soil Liquefaction ◽  
Earthquake Response ◽  
Response Analysis ◽  
Fe Model ◽  
Two Dimensional ◽  
Foundation Soil ◽  
Soil Medium ◽  
Surface Plasticity ◽  
Earthquake Response Analysis

This paper presents a two-dimensional advanced nonlinear FE model of an actual bridge, the Humboldt Bay Middle Channel (HBMC) Bridge, and its response to seismic input motions. This computational model is developed in the new structural analysis software framework OpenSees. The foundation soil is included to incorporate soil-foundation-structure interaction effects. Realistic nonlinear constitutive models for cyclic loading are used for the structural (concrete and reinforcing steel) and soil materials. The materials in the various soil layers are modeled using multi-yield-surface plasticity models incorporating liquefaction effects. Lysmer-type absorbing/transmitting boundaries are employed to avoid spurious wave reflections along the boundaries of the computational soil domain. Both procedures and results of earthquake response analysis are presented. The simulation results indicate that the earthquake response of the bridge is significantly affected by inelastic deformations of the supporting soil medium due to lateral spreading induced by soil liquefaction.

scholarly journals Preliminary results of ground-motion characteristics

2012 ◽  
Vol 55 (4) ◽  
Author(s):  
Francesca Bozzoni ◽  
Carlo Giovanni Lai ◽  
Laura Scandella
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Response Spectrum ◽  
Field Tests ◽  
Response Spectra ◽  
Ground Acceleration ◽  
Preliminary Results ◽  
Emilia Earthquake ◽  
Particle Orbit ◽  
2012 Emilia Earthquake

The preliminary results are presented herein for the engineering applications of the characteristics of the ground motion induced by the May 20, 2012, Emilia earthquake. Shake maps are computed to provide estimates of the spatial distribution of the induced ground motion. The signals recorded at the Mirandola (MRN) station, the closest to the epicenter, have been processed to obtain acceleration, velocity and displacement response spectra. Ground-motion parameters from the MRN recordings are compared with the corresponding estimates from recent ground-motion prediction equations, and with the spectra prescribed by the current Italian Building Code for different return periods. The records from the MRN station are used to plot the particle orbit (hodogram) described by the waveform. The availability of results from geotechnical field tests that were performed at a few sites in the Municipality of Mirandola prior to this earthquake of May 2012 has allowed preliminary assessment of the ground response. The amplification effects at Mirandola are estimated using fully stochastic site-response analyses. The seismic input comprises seven actual records that are compatible with the Italian code-based spectrum that refers to a 475-year return period. The computed acceleration response spectrum and the associated dispersion are compared to the spectra calculated from the recordings of the MRN station. Good agreement is obtained for periods up to 1 s, especially for the peak ground acceleration. For the other periods, the spectral acceleration of the MRN recordings exceeds that of the computed spectra.<br />

scholarly journals Realistic modelling of observed seismic motion in compIex sedimentary basins

1994 ◽  
Vol 37 (6) ◽  
Author(s):  
D. Fah ◽  
G. F. Panza
Keyword(s):  
Ground Motion ◽  
Mexico City ◽  
Sedimentary Basin ◽  
Numerical Technique ◽  
Sedimentary Basins ◽  
Space Distribution ◽  
Soil Conditions ◽  
Macroseismic Data ◽  
Resonance Effects ◽  
Local Soil

Three applications of a numerical technique are illustrated to model realistically the seismic ground motion for complex two-dimensional structures. First we consider a sedimentary basin in the Friuli region, and we model strong motion records from an aftershock of the 1976 earthquake. Then we simulate the ground motion caused in Rome by the 1915, Fucino (Italy) earthquake, and we compare our modelling with the damage distribution observed in the town. Finally we deal with the interpretation of ground motion recorded in Mexico City, as a consequence of earthquakes in the Mexican subduction zone. The synthetic signals explain the major characteristics (relative amplitudes, spectral amplification, frequency content) of the considered seismograms, and the space distribution of the available macroseismic data. For the sedimentary basin in the Friuli area, parametric studies demonstrate the relevant sensitivity of the computed ground motion to small changes in the subsurface topography of the sedimentary basin, and in the velocity and quality factor of the sediments. The relative Arias Intensity, determined from our numerical simulation in Rome, is in very good agreoment with the distribution of damage observed during the Fucino earthquake. For epicentral distances in the range 50 km-100 km, the source location and not only the local soil conditions control the local effects. For Mexico City, the observed ground motion can be explained as resonance effects and as excitation of local surface waves, and the theoretical and the observed maximum spectral amplifications are very similar. In general, our numerical simulations estimate the maximum and average spectral amplification for specific sites, i.e. they are a very powerful tool for accurate micro-zonation

Sign in / Sign up

Export Citation Format

Share Document