scholarly journals Investigation of Water Absorption and Color Change of Indirect Composite Resins

2021 ◽  
Author(s):  
Nur İskender ◽  
Bilge Ersöz ◽  
Numan Aydın ◽  
Serpil Karaoğlanoğlu ◽  
Elif Aybala Oktay
Keyword(s):  
Particle Size ◽  
Water Absorption ◽  
Composite Resin ◽  
Color Change ◽  
Composite Resins ◽  
Tissue Loss ◽  
Absorption Data ◽  
Color Changes ◽  
Indirect Composites ◽  
Indirect Composite

Purpose:Since conventional composite resins have some disadvantages such as polymerization shrinkage and secondarycaries formation, indirect restorations are preferred in cases where tooth tissue loss is high. The aim of this study is toexamine the water absorption and color change of indirect composite resins in different beverages.Materials & Methods:In the study, 40 specimens (10×2 mm) were arranged from each composite using three indirect(Signum Composite, Signum Ceramis and Gradia Plus) and one conventional (GrandioSO) composite resin. After thespecimens were polished, they were used for water absorption and color change test. The water absorption test wasperformed through keeping them in water for 7 days as specified in ISO 4049:2009. Samples were kept in coffee, tea anddistilled water for 7 days in order to examine color differences. The water absorption and color change values of thecomposite resins at the end of the 7th day were appraised using one-way analysis of variance (ANOVA) and Tukey’s test(p<0.05).Results:While there was no statistically considerable difference between the water absorption data of the indirect andtraditional composite resin materials we used in the study (p>0.05). When the color changes of resin-containingcomposites in water, coffee and tea were examined, traditional composite resin (GrandioSO) showed statistically lesscolor change than indirect composites in water, coffee and tea (p<0.05).Conclusion:Although indirect composite resins showed similar water absorption with conventional composite, theyshowed more color change than conventional composite. The highest color change in indirect composites was seen incoffee solution. Particle size of the indirect composites do not affect water absorption, but the decrease in particle size ofcomposites shows less color change.

Influence of Hydrogen Peroxide Bleaching Gels on Color, Opacity, and Fluorescence of Composite Resins

2012 ◽  
Vol 37 (5) ◽  
pp. 526-531 ◽  
Author(s):  
CRG Torres ◽  
CF Ribeiro ◽  
E Bresciani ◽  
AB Borges
Keyword(s):  
Hydrogen Peroxide ◽  
Composite Resin ◽  
Color Change ◽  
Composite Resins ◽  
Control Group ◽  
Peroxide Bleaching ◽  
Color Changes ◽  
Tukey Test ◽  
Bleaching Gels ◽  
Bleaching Treatment

SUMMARY The aim of the present study was to evaluate the effect of 20% and 35% hydrogen peroxide bleaching gels on the color, opacity, and fluorescence of composite resins. Seven composite resin brands were tested and 30 specimens, 3-mm in diameter and 2-mm thick, of each material were fabricated, for a total of 210 specimens. The specimens of each tested material were divided into three subgroups (n=10) according to the bleaching therapy tested: 20% hydrogen peroxide gel, 35% hydroxide peroxide gel, and the control group. The baseline color, opacity, and fluorescence were assessed by spectrophotometry. Four 30-minute bleaching gel applications, two hours in total, were performed. The control group did not receive bleaching treatment and was stored in deionized water. Final assessments were performed, and data were analyzed by two-way analysis of variance and Tukey tests (p&lt;0.05). Color changes were significant for different tested bleaching therapies (p&lt;0.0001), with the greatest color change observed for 35% hydrogen peroxide gel. No difference in opacity was detected for all analyzed parameters. Fluorescence changes were influenced by composite resin brand (p&lt;0.0001) and bleaching therapy (p=0.0016) used. No significant differences in fluorescence between different bleaching gel concentrations were detected by Tukey test. The greatest fluorescence alteration was detected on the brand Z350. It was concluded that 35% hydrogen peroxide bleaching gel generated the greatest color change among all evaluated materials. No statistical opacity changes were detected for all tested variables, and significant fluorescence changes were dependent on the material and bleaching therapy, regardless of the gel concentration.

scholarly journals Color Stability of the Bulk-Fill Composite Resins with Different Thickness in Response to Coffee/Water Immersion

2016 ◽  
Vol 2016 ◽  
pp. 1-5 ◽  
Author(s):  
Sayna Shamszadeh ◽  
Seyedeh Mahsa Sheikh-Al-Eslamian ◽  
Elham Hasani ◽  
Ahmad Najafi Abrandabadi ◽  
Narges Panahandeh
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Imaging System ◽  
Water Immersion ◽  
Color Space ◽  
Color Stability ◽  
Composite Resins ◽  
Distilled Water ◽  
Color Changes ◽  
Post Hoc

We aimed to evaluate the color stability of bulk-fill and conventional composite resin with respect to thickness and storage media. Twenty specimens of a conventional composite resin (6 mm diameter and 2 mm thick) and 40 specimens of the bulk-fill Tetric EvoCeram composite resin at two different thicknesses (6 mm diameter and 2 mm thick or 4 mm thick,n=20) were prepared. The specimens were stored in distilled water during the study period (28 d). Half of the specimens were remained in distilled water and the other half were immersed in coffee solution 20 min/d and kept in distilled water between the cycles. Color changes (ΔE) were measured using the CIEL⁎a⁎b⁎color space and a digital imaging system at 1, 7, 14, and 28 days of storage. Data were analyzed using Two-way ANOVA and Tukey’s HSD post hoc test (P<0.05). Composite resins showed significant increase in color changes by time (bulk-fill > conventional;P<0.001). Coffee exhibited significantly more staining susceptibility than that of distilled water (P<0.001). There was greater color changes with increasing the increment thickness, which was significant at 14 (P<0.001) and 28 d (P<0.01). Color change of bulk-fill composite resin was greater than that of the conventional one after coffee staining and is also a function of increment thicknesses.

scholarly journals Color stability of an artificially aged nanofilled composite resin post-cured with different techniques

2021 ◽  
Vol 15 (1) ◽  
pp. 53-58
Author(s):  
Lais Sampaio Souza ◽  
Tais Rocha Donato ◽  
Gabriela Alves Cerqueira ◽  
Andrea Nobrega Cavalcanti ◽  
Paula Mathias
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Physical And Mechanical Properties ◽  
Color Stability ◽  
Microwave Oven ◽  
Composite Resins ◽  
Distilled Water ◽  
Color Analysis ◽  
Color Changes ◽  
Total Color Change

Background. Post-cured composite resins exhibit improvements in physical and mechanical properties due to additional polymerization conversion. However, the post-curing techniques might influence the color stability of composite resin materials. Thus, this study evaluated the color stability of a nanofilled composite resin (Filtek Z350 XT - 3M ESPE) subjected to different post-curing techniques. Methods. Sixty samples (color A2) were randomly allocated to six experimental groups (n=10): G1: photoactivation (P) (control); G2: P + microwave oven with distilled water; G3: P + microwave oven without distilled water; G4: P + conventional oven; G5: P + dry-heat sterilizer; G6: P + steam autoclave. All the groups were stored in distilled water for 60 days and immersed daily in 5 mL of a coffee solution for 3 minutes. The color readings (CIEL*a*b* system) were performed at two different time intervals, initially and after 60 days, in a reflectance spectrophotometer (UV-2600; Shimadzu). The colorimetric readings were performed using the Color Analysis software (CIEL*a*b* system). Results. Group G6 exhibited significantly low values of total color change (ΔE=13.16). The control (ΔE=15.32) and G5 (ΔE=15.49) groups exhibited intermediate values, with no difference between them. In turn, the groups in which the resin was heated in a microwave (G2 ΔE=18.55 and G3 ΔE=19.45) exhibited the most significant color changes (one-way ANOVA and Tukey test, P≤0.05). Conclusion. Steam autoclave post-polymerization increased the color stability of the nanofilled resin subjected to artificial aging and coffee immersion.

scholarly journals Perubahan Warna Permukaan Resin Komposit Nanohybird Pasca Perendaman Dalam Cuko Pempek

2019 ◽  
Vol 8 (1) ◽  
pp. 12
Author(s):  
Nabila Farah Khoirunnisa ◽  
Budiono Budiono ◽  
Lira Wiet Jayanti
Keyword(s):  
Composite Resin ◽  
Color Change ◽  
Composite Resins ◽  
Test Results ◽  
Surface Color ◽  
Color Changes ◽  
Liquid Absorption ◽  
Post Test ◽  
Experimental Laboratory ◽  
Nanohybrid Composite

The development of science, technology and patient demands regarding restorative materials that are colored with teeth is currently higher. Dental-colored restoration materials are widely used, one of which is nanohybrid composite resin. The nanohybrid composite resin has a small and fine particle size of 0.04 um. Nanohybrid composite resins have many advantages, but they also have the disadvantage of liquid absorption properties which can cause discoloration. One of the liquids that cause discoloration is cuko pempek. Objective: To find out the surface color changes of nanohybrid composite resin after immersion in cuko pempek. Methods, an experimental laboratory study with a pre and post test only group design study design. Sample 16 pieces of nanohybrid composite resin measuring 10 x 2 mm. The sample was immersed using pempek cuko as much as 5 ml with a temperature of 37oC for 7 days. Color change is measured with a spechtrophotometer (UV-2401 PC). Results, there was a change in the surface color of nanohybrid composite resin soaked with pempek cuko which marked an average increase in dE*ab before immersion (18.5925) and after immersion (23.3169) with a difference of 4.7844. The paired t test results also showed a significant color change that is p = 0,000 (p <0.05). Conclusion, there is a change in the surface color of the post-immersion nanohybrid composite resin in pempek cuko.

scholarly journals Effect of an Optical Whitening Toothpaste on Color Stability of Tooth-Colored Restorative Materials

2020 ◽  
Vol 14 (01) ◽  
pp. 085-091
Author(s):  
Sedighe Sadat Hashemikamangar ◽  
Farnoosh Hoseinpour ◽  
Nazanin Kiomarsi ◽  
Mehrzad Gholampour Dehaki ◽  
Mohammad Javad Kharazifard
Keyword(s):  
Statistical Analysis ◽  
Color Change ◽  
Color Stability ◽  
Composite Resins ◽  
Time Points ◽  
Color Changes ◽  
Honestly Significant Difference ◽  
Significant Difference ◽  
Resin Modified Glass Ionomer ◽  
Composite Samples

Abstract Objectives This study aimed to assess the effect of an optical whitening toothpaste on color stability of microhybrid, nanofilled, and microfilled composite resins and resin-modified glass ionomer (RMGI) cement in comparison of two other toothpastes. Materials and Methods In this experimental study, disc-shaped composite samples were fabricated. The samples were then polished using silicon carbide papers. Twenty-seven samples of each material were fabricated and subjected to colorimetry using a spectrophotometer. Each group of material was then divided into three subgroups for the application of conventional whitening and whitening containing blue covarine toothpastes. One operator brushed the samples with an electric soft toothbrush with circular motion twice a day, each time for 30 seconds. Colorimetry was performed at 0, 1, 7, 30, and 90 days. Statistical Analysis Two-way analysis of variance (ANOVA), one-way ANOVA, and Tukey’s honestly significant difference (HSD) test were used for statistical analysis. Results The interaction effect of type of restorative material and time on ∆E was not significant at baseline or 1 day (p > 0.05). The effect of type of toothpaste on ∆E was not significant at baseline or 1 day (p = 0.78) but the effect of type of material was significant (p < 0.05). The toothpastes had significantly different effects on ∆E of Z250 at all time points (p < 0.05) except for ∆E0–30 (p = 0.106). The toothpastes had significantly different effects on ∆E of Z350 and Gradia at all time points (p < 0.05). The same was true for RMGI except for ∆E0–7 (p = 0.43) and ∆E0–90 (p = 0.52). The majority of color changes caused by toothpastes were not clinically perceivable (∆E < 3.3), except for ∆E0–90 by the whitening toothpaste (∆E = 9), ∆E0–90 by the conventional toothpaste for Z350 (∆E = 3.9), and ∆E0–1 by the whitening toothpaste for RMGI (∆E = 3.7). Conclusion The color change of all composite samples was not clinically perceivable (<3.3) at all time points, which shows that the tested toothpastes do not cause a significant change in color of composite materials.

scholarly journals Influence of Mechanical and Chemical Degradation in the Surface Roughness, Gloss, and Color of Microhybrid Composites

2017 ◽  
Vol 18 (4) ◽  
pp. 283-288 ◽  
Author(s):  
Cleidiel AA Lemos ◽  
Silvio J Mauro ◽  
Paulo H dos Santos ◽  
André LF Briso ◽  
Ticiane C Fagundes
Keyword(s):  
Surface Roughness ◽  
Clinical Significance ◽  
Composite Resin ◽  
Color Change ◽  
Wilcoxon Test ◽  
Chemical Degradation ◽  
Color Changes ◽  
Final Data ◽  
Properties Of Materials ◽  
Spearman Test

ABSTRACT Aim The aim of this study was to investigate the association of different degradations on the roughness, gloss, and color changes of microhybrid composites. Materials and methods Ten specimens were prepared for Charisma, Amelogen Plus, Point 4, and Opallis resins. Surfaces were polished and baseline measurements of roughness, gloss, and color were recorded. Specimens were then submitted to chemical and mechanical challenges, and the specimens were reevaluated. Roughness and gloss were analyzed by Kruskal – Wallis and Dunn's test (p < 0.05). Color change (ΔE) was analyzed by one-way analysis of variance and Tukey's tests (p < 0.05). The initial and final data were compared using the Wilcoxon test (p < 0.05). Spearman test checked the correlation between the roughness and gloss (p < 0.05). Results Regarding surface roughness and gloss, there was no difference between composites before challenges. However, all composites showed a significant increase of roughness after challenges, with highest values for Charisma. The gloss was influenced by challenges, evidencing the best gloss for Point 4. Charisma showed the highest value of color change. There was no correlation between surface roughness and gloss for the initial analysis, and after the challenges. Conclusion Composites were influenced by association of challenges, and Charisma showed the highest changes for roughness, gloss, and color. Clinical significance The type of composite resin influenced the properties of materials, which are surface roughness, gloss, and color change. The dentist should be aware of the performance of different brands, to choose the correct required composite resin for each type of patient or region to be restored. How to cite this article Lemos CAA, Mauro SJ, dos Santos PH, Briso ALF, Fagundes TC. Influence of Mechanical and Chemical Degradation in the Surface Roughness, Gloss, and Color of Microhybrid Composites. J Contemp Dent Pract 2017;18(4):283-288.

scholarly journals Effect of polishing methods on color change by water absorption in several composite resins

2019 ◽  
Vol 35 (1) ◽  
pp. 1-10
Author(s):  
Hye Jin Kim ◽  
Mi-yeon Kim ◽  
Byung-chul Song ◽  
Sun-ho Kim ◽  
Jeong-hee Kim
Keyword(s):  
Water Absorption ◽  
Color Change ◽  
Composite Resins

Color Stability of Heat-Cured Denture Base Resins

2015 ◽  
Vol 1088 ◽  
pp. 519-525
Author(s):  
Hua Li Huang ◽  
Dan Feng ◽  
Hai Huan Gong ◽  
Ai Yang Song ◽  
Song Zhu
Keyword(s):  
Water Absorption ◽  
Red Wine ◽  
Color Change ◽  
Artificial Saliva ◽  
Color Stability ◽  
Denture Base ◽  
Color Changes ◽  
Dental Resins ◽  
Base Resin ◽  
Storage Times

Heat-cured denture base resin is an important component in removable partial dentures and complete dentures, and has been widely used in the clinic. However, during long-term use, its appearance may be affected by varying degrees of color change, affecting the appearance and longevity of the dentures. In this study we examined the color changes and water absorption and solubility of dental base resins to investigate the color stability of four types of resin materials: New Century, Heraeus, Nissin and BASIS-HI. They were soaked in artificial saliva (as control), red wine, cola, coffee and tea separately at 37°C for 1, 4 or 12 weeks. Results are presented on which the color changes of dental base resin materials were associated with different denture base resins, soak solutions and storage times. We found that most of the dental resins became darker at prolonged immersion time. Heraeus resins showed more significant changes after soaking in red wine for 12 weeks, and its water absorption and solubility values were also greater than those of the other three types of resins. The color changes of New Century, Nissin and BASIS-HI soaked in the four solutions were relatively stable. The information obtained here will help optimize maintenance of dentures and also inform choice of denture materials.

A Five-Year Clinical Evaluation of Direct Nanofilled and Indirect Composite Resin Restorations in Posterior Teeth

2013 ◽  
Vol 38 (2) ◽  
pp. E31-E41 ◽  
Author(s):  
AR Cetin ◽  
N Unlu ◽  
N Cobanoglu
Keyword(s):  
Composite Resin ◽  
Clinical Performance ◽  
United States Public Health ◽  
The United States ◽  
Composite Resins ◽  
Posterior Teeth ◽  
Indirect Composite ◽  
Composite Resin Restorations ◽  
Clinical Conditions ◽  
Resin Restorations

SUMMARY Aim: To assess the clinical efficacy of posterior composite resin restorations placed directly and indirectly in posterior teeth after five years. Materials and Methods: A total of 108 cavities in 54 patients were restored with three direct composite resins (Filtek SupremeXT [FSXT], Tetric Evo Ceram [TEC], AELITE Aesthetic [AA]) and two indirect composite resins (Estenia [E] and Tescera ATL [TATL]). All restorations were evaluated by two examiners using the United States Public Health Service criteria at baseline and five years after placement. Statistical analysis was completed with Fisher exact and McNemar χ2 tests. Results: At baseline, 4% (five) of the restored teeth presented postoperative sensitivity; however, only one of them (a member of the E group) required canal treatment and replacement after two years. At the five-year evaluation, all restorations were retained, with Alpha ratings at 100%. Only one tooth (in the TEC group) required replacement after three years due to secondary caries. Color match, surface texture, and marginal integrity were predominantly scored as Alpha after five years for all groups. After that time, marginal discoloration was scored as Alpha in 64% of AE restorations, 70% of TATL restorations, 73% of E restorations, and 87% of FSXT restorations. There were no Charlie scores recorded for any of the restorative systems. Conclusions: Under controlled clinical conditions, indirect composite resin inlays and direct composite resin restorations exhibited an annual failure rate of 2.5% and 1.6%, respectively, after five years. Therefore, the investigated materials showed acceptable clinical performance, and no significant differences were found among them.

Effect of Tooth-Whitening Procedures on Stained Composite Resins

2019 ◽  
Vol 44 (1) ◽  
pp. 65-75 ◽  
Author(s):  
JW Reinhardt ◽  
MM Balbierz ◽  
CM Schultz ◽  
B Simetich ◽  
MW Beatty
Keyword(s):  
Red Wine ◽  
Composite Resin ◽  
Color Change ◽  
Composite Resins ◽  
The Other ◽  
Time Interval ◽  
Distilled Water ◽  
Water Control ◽  
Tooth Whitening ◽  
Final Composite

SUMMARY In this laboratory study, a composite resin was stained to a visibly discernible level using both coffee and red wine over 14 days (change was considered clinically noticeable and significant when ΔEab*≥2.7). Color change was measured at one, three, seven, and 14 days of staining. Although the nature of color change was different for the two staining solutions, the overall degree of staining (ΔEab*) rendered by either coffee or wine at each time interval was not significantly different (p≥0.05). Four whitening protocols were applied to stained composites. Treatment included applications of distilled water (control), Crest Pro-Health [HD] toothpaste, Crest Whitestrips, Opalescence PF bleach (15%), and application of a fine pumice polishing (Preppies). HD toothpaste and Whitestrips were applied daily for 21 days, Opalescence was applied daily for 10 days, and polishing was applied once. Each of the whitening products, applied in a manner simulating at-home or in-office treatment, was effective in producing color improvements (lightening) over controls (p&lt;0.05), but none of the four treatments produced lightening that was significantly different from the other treatments (p≥0.05). A comparison of final composite color with that measured at baseline showed that Opalescence returned composite color to an acceptable level following exposure to both staining solutions (ΔEab*&lt;2.7), Whitestrips returned color close to baseline for wine-stained composites, and HD paste and polishing permitted residual stain to remain (ΔEab*≥2.7).

Sign in / Sign up

Export Citation Format

Share Document